[PATCH 2/3] am33xx: board: remove GPIO platforma data

[Lokesh Vutla]

Hi Dario,

On 13/02/21 4:30 pm, Dario Binacchi wrote:
> Since the board has been converted to driver model and DT is supported,
> GPIO platform are no more required and can be removed.
> 
> Signed-off-by: Dario Binacchi <dariobin at libero.it>

Not all am335x platforms are converted to DT. Due to SPL size constraints
am335x_evm_defconfig is still using plat data. This patch will break such
platforms no?

Thanks and regards,
Lokesh

> ---
> 
>  arch/arm/mach-omap2/am33xx/board.c | 23 -----------------------
>  1 file changed, 23 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c
> index e17898d8fb..f48d4cefc4 100644
> --- a/arch/arm/mach-omap2/am33xx/board.c
> +++ b/arch/arm/mach-omap2/am33xx/board.c
> @@ -126,29 +126,6 @@ U_BOOT_DRVINFOS(am33xx_i2c) = {
>  };
>  #endif
>  
> -#if CONFIG_IS_ENABLED(DM_GPIO)
> -static const struct omap_gpio_plat am33xx_gpio[] = {
> -	{ 0, AM33XX_GPIO0_BASE },
> -	{ 1, AM33XX_GPIO1_BASE },
> -	{ 2, AM33XX_GPIO2_BASE },
> -	{ 3, AM33XX_GPIO3_BASE },
> -#ifdef CONFIG_AM43XX
> -	{ 4, AM33XX_GPIO4_BASE },
> -	{ 5, AM33XX_GPIO5_BASE },
> -#endif
> -};
> -
> -U_BOOT_DRVINFOS(am33xx_gpios) = {
> -	{ "gpio_omap", &am33xx_gpio[0] },
> -	{ "gpio_omap", &am33xx_gpio[1] },
> -	{ "gpio_omap", &am33xx_gpio[2] },
> -	{ "gpio_omap", &am33xx_gpio[3] },
> -#ifdef CONFIG_AM43XX
> -	{ "gpio_omap", &am33xx_gpio[4] },
> -	{ "gpio_omap", &am33xx_gpio[5] },
> -#endif
> -};
> -#endif
>  #if CONFIG_IS_ENABLED(DM_SPI) && !CONFIG_IS_ENABLED(OF_CONTROL)
>  static const struct omap3_spi_plat omap3_spi_pdata = {
>  	.regs = (struct mcspi *)AM33XX_SPI0_OFFSET,
>