[PATCH v2 2/3] board: freescale: undef CONFIG_SPL_DM_I2C for SPL

[Igor Opaniuk]

Hi Tom,

On Tue, Feb 9, 2021 at 4:26 AM Tom Rini <trini at konsulko.com> wrote:
>
> On Tue, Feb 09, 2021 at 01:37:54AM +0200, Igor Opaniuk wrote:
>
> > From: Igor Opaniuk <igor.opaniuk at foundries.io>
> >
> > Replace CONFIG_DM_I2C undefs with CONFIG_SPL_DM_I2C for the SPL build
> > case. This should be moved to appropriate board defconfigs
> > in the future.
> >
> > Signed-off-by: Igor Opaniuk <igor.opaniuk at foundries.io>
> > ---
> >
> > (no changes since v1)
> >
> >  include/configs/T104xRDB.h       | 2 +-
> >  include/configs/imx8mp_evk.h     | 2 +-
> >  include/configs/ls1021atwr.h     | 2 +-
> >  include/configs/ls1046a_common.h | 2 +-
> >  include/configs/phycore_imx8mp.h | 2 +-
> >  5 files changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
> > index aee00a86cf..f4d0aec42b 100644
> > --- a/include/configs/T104xRDB.h
> > +++ b/include/configs/T104xRDB.h
> > @@ -30,7 +30,7 @@
> >  #define CONFIG_SPL_SKIP_RELOCATE
> >  #define CONFIG_SPL_COMMON_INIT_DDR
> >  #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
> > -#undef CONFIG_DM_I2C
> > +#undef CONFIG_SPL_DM_I2C
> >  #endif
> >  #define RESET_VECTOR_OFFSET          0x27FFC
> >  #define BOOT_PAGE_OFFSET             0x27000
> > diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
> > index 4850b1b934..33c5759b46 100644
> > --- a/include/configs/imx8mp_evk.h
> > +++ b/include/configs/imx8mp_evk.h
> > @@ -37,7 +37,7 @@
> >  #define CONFIG_POWER_I2C
> >  #define CONFIG_POWER_PCA9450
> >
> > -#undef CONFIG_DM_I2C
> > +#undef CONFIG_SPL_DM_I2C
> >  #define CONFIG_SYS_I2C
> >
> >  #endif
> > diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
> > index 3e85bb3850..f2bf35ffa5 100644
> > --- a/include/configs/ls1021atwr.h
> > +++ b/include/configs/ls1021atwr.h
> > @@ -435,7 +435,7 @@
> >
> >  #ifdef CONFIG_SPL_BUILD
> >  #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
> > -#undef CONFIG_DM_I2C
> > +#undef CONFIG_SPL_DM_I2C
> >  #else
> >  #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
> >  #endif
> > diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
> > index d44a7f105e..b5bbb636da 100644
> > --- a/include/configs/ls1046a_common.h
> > +++ b/include/configs/ls1046a_common.h
> > @@ -16,7 +16,7 @@
> >  #define SPL_NO_QSPI
> >  #define SPL_NO_USB
> >  #define SPL_NO_SATA
> > -#undef CONFIG_DM_I2C
> > +#undef CONFIG_SPL_DM_I2C
> >  #endif
> >  #if defined(CONFIG_SPL_BUILD) && \
> >       (defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
> > diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
> > index 889dd36e6e..dcd320f746 100644
> > --- a/include/configs/phycore_imx8mp.h
> > +++ b/include/configs/phycore_imx8mp.h
> > @@ -33,7 +33,7 @@
> >  #define CONFIG_POWER_I2C
> >  #define CONFIG_POWER_PCA9450
> >
> > -#undef CONFIG_DM_I2C
> > +#undef CONFIG_SPL_DM_I2C
> >  #define CONFIG_SYS_I2C
> >
> >  #endif
>
> This is somewhere between "doesn't actually work" and "works by chance".
> Since you're adding the symbol to Kconfig, keep it disabled on these
> boards in the defconfig please.
To be honest, I was expecting that comment :)
You're 100% right, I just wanted to avoid messing a lot with
defconfigs of boards I can't
test (so I assumed this current change is less intrusive, as basically
it just replicates
previous behaviour).

For only ls1046a there are 19 different defconfigs, not to mention other boards.

Ok, I'll address that and send v3.
>
> --
> Tom

Regards,
Igor

-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Igor Opaniuk

mailto: igor.opaniuk at gmail.com
skype: igor.opanyuk
+380 (93) 836 40 67
http://ua.linkedin.com/in/iopaniuk