[PATCH v1] net: eth-uclass: Change uclass driver name to ethernet

[Michael Walle]

Am 2021-01-19 21:40, schrieb Tom Rini:
> On Tue, Jan 19, 2021 at 03:01:38PM -0500, Tom Rini wrote:
>> On Fri, Jan 08, 2021 at 10:53:05AM +0800, David Wu wrote:
>> 
>> > dev_read_alias_seq() used uc_drv->name compared to alias
>> > stem string, Ethernet's alias stem uses "ethernet", which
>> > does not match the eth-uclass driver name "eth", can not
>> > get the correct index of ethernet alias namer. So it seems
>> > change uclass driver name to match the alias stem is a more
>> > reasonable way.
>> >
>> > Signed-off-by: David Wu <david.wu at rock-chips.com>
>> > Reviewed-by: Simon Glass <sjg at chromium.org>
>> 
>> Applied to u-boot/master, thanks!
> 
> I'm reverting this change as it breaks a number of tests that need to 
> be
> updated to match on the new name.

David, are you planning to submit a new version? If I'm not
mistaken, the following changes should be enought to make the
tests pass again:

--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -14,9 +14,9 @@

         aliases {
                 console = &uart0;
-               eth0 = "/eth at 10002000";
-               eth3 = &eth_3;
-               eth5 = &eth_5;
+               ethernet0 = "/eth at 10002000";
+               ethernet3 = &eth_3;
+               ethernet5 = &eth_5;
                 gpio1 = &gpio_a;
                 gpio2 = &gpio_b;
                 gpio3 = &gpio_c;

In commit cc32fd911aa9 ("arm: dts: ls1028a: Add Ethernet switch
node and dependencies") there was recently an additon to a board
which actually uses these aliases. So this patch should change
them too.

I was actually under the impression that the alias was
"ethernetN" and added them to my board, see
arch/arm/fsl-ls1028a-kontron*u-boot.dtsi. Seems like I wasn't
the first one which was mistaken:

$ grep "ethernet. =" arch/**/*u-boot.dtsi
arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi:		ethernet2 = &enetc2;
arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi:		ethernet3 = &enetc6;
arch/arm/dts/fsl-ls1028a-kontron-sl28-var1-u-boot.dtsi:		ethernet0 = 
&enetc1;
arch/arm/dts/fsl-ls1028a-kontron-sl28-var3-u-boot.dtsi:		ethernet0 = 
&enetc0;
arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi:		ethernet0 = 
&enetc0;
arch/arm/dts/fsl-ls1028a-kontron-sl28-var4-u-boot.dtsi:		ethernet1 = 
&enetc1;
arch/arm/dts/k3-am654-base-board-u-boot.dtsi:		ethernet0 = &cpsw_port1;
arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi:		ethernet0 = 
&cpsw_port1;
arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi:		ethernet0 = 
&cpsw_port1;
arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi:		ethernet1 = &ksz8851;

So at the moment  I'm not sure if I should fix my dtsi files
to use the ethN aliases or if I should just wait because this
patch will make it into u-boot soon.

I could also pick up this patch, amend it and resubmit it
myself.

-michael