[PATCH 56/57] ppc: Remove T4160RDB board

Tom Rini trini at konsulko.com
Sun Feb 21 02:06:33 CET 2021


This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is the last ARCH_T1023 platform, remove that support
as well.

Cc: Priyanka Jain <priyanka.jain at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/powerpc/cpu/mpc85xx/Kconfig              |  39 +-
 arch/powerpc/cpu/mpc85xx/Makefile             |   2 -
 arch/powerpc/cpu/mpc85xx/fdt.c                |   5 +-
 .../powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c |   2 +-
 arch/powerpc/cpu/mpc85xx/speed.c              |   3 +-
 arch/powerpc/cpu/mpc85xx/t4240_serdes.c       | 202 ------
 arch/powerpc/include/asm/config_mpc85xx.h     |   5 +-
 arch/powerpc/include/asm/fsl_secure_boot.h    |   1 -
 arch/powerpc/include/asm/immap_85xx.h         |   4 +-
 board/freescale/t4rdb/Kconfig                 |  14 -
 board/freescale/t4rdb/MAINTAINERS             |   8 -
 board/freescale/t4rdb/Makefile                |  19 -
 board/freescale/t4rdb/cpld.c                  | 129 ----
 board/freescale/t4rdb/cpld.h                  |  48 --
 board/freescale/t4rdb/ddr.c                   | 128 ----
 board/freescale/t4rdb/ddr.h                   |  77 --
 board/freescale/t4rdb/eth.c                   | 152 ----
 board/freescale/t4rdb/law.c                   |  30 -
 board/freescale/t4rdb/pci.c                   |  25 -
 board/freescale/t4rdb/spl.c                   |  98 ---
 board/freescale/t4rdb/t4240rdb.c              | 153 ----
 board/freescale/t4rdb/t4_pbi.cfg              |  27 -
 board/freescale/t4rdb/t4_sd_rcw.cfg           |   7 -
 board/freescale/t4rdb/t4rdb.h                 |  17 -
 board/freescale/t4rdb/tlb.c                   | 123 ----
 configs/T4160RDB_defconfig                    |  57 --
 configs/T4240RDB_SDCARD_defconfig             |  78 --
 configs/T4240RDB_defconfig                    |  66 --
 drivers/ddr/fsl/Kconfig                       |   3 +-
 drivers/net/Kconfig                           |   1 -
 drivers/net/fm/Makefile                       |   1 -
 include/configs/T4240RDB.h                    | 667 ------------------
 32 files changed, 9 insertions(+), 2182 deletions(-)
 delete mode 100644 board/freescale/t4rdb/Kconfig
 delete mode 100644 board/freescale/t4rdb/MAINTAINERS
 delete mode 100644 board/freescale/t4rdb/Makefile
 delete mode 100644 board/freescale/t4rdb/cpld.c
 delete mode 100644 board/freescale/t4rdb/cpld.h
 delete mode 100644 board/freescale/t4rdb/ddr.c
 delete mode 100644 board/freescale/t4rdb/ddr.h
 delete mode 100644 board/freescale/t4rdb/eth.c
 delete mode 100644 board/freescale/t4rdb/law.c
 delete mode 100644 board/freescale/t4rdb/pci.c
 delete mode 100644 board/freescale/t4rdb/spl.c
 delete mode 100644 board/freescale/t4rdb/t4240rdb.c
 delete mode 100644 board/freescale/t4rdb/t4_pbi.cfg
 delete mode 100644 board/freescale/t4rdb/t4_sd_rcw.cfg
 delete mode 100644 board/freescale/t4rdb/t4rdb.h
 delete mode 100644 board/freescale/t4rdb/tlb.c
 delete mode 100644 configs/T4160RDB_defconfig
 delete mode 100644 configs/T4240RDB_SDCARD_defconfig
 delete mode 100644 configs/T4240RDB_defconfig
 delete mode 100644 include/configs/T4240RDB.h

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 42c4d1f0399e..143ddaec2e6a 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -179,13 +179,6 @@ config TARGET_T2080RDB
 	imply CMD_SATA
 	imply PANIC_HANG
 
-config TARGET_T4160RDB
-	bool "Support T4160RDB"
-	select ARCH_T4160
-	select SUPPORT_SPL
-	select PHYS_64BIT
-	imply PANIC_HANG
-
 config TARGET_T4240RDB
 	bool "Support T4240RDB"
 	select ARCH_T4240
@@ -810,31 +803,6 @@ config ARCH_T2080
 	imply CMD_REGINFO
 	imply FSL_SATA
 
-config ARCH_T4160
-	bool
-	select E500MC
-	select E6500
-	select FSL_LAW
-	select SYS_FSL_DDR_VER_47
-	select SYS_FSL_ERRATUM_A004468
-	select SYS_FSL_ERRATUM_A005871
-	select SYS_FSL_ERRATUM_A006379
-	select SYS_FSL_ERRATUM_A006593
-	select SYS_FSL_ERRATUM_A007186
-	select SYS_FSL_ERRATUM_A007798
-	select SYS_FSL_ERRATUM_A009942
-	select SYS_FSL_HAS_DDR3
-	select SYS_FSL_HAS_SEC
-	select SYS_FSL_QORIQ_CHASSIS2
-	select SYS_FSL_SEC_BE
-	select SYS_FSL_SEC_COMPAT_4
-	select SYS_PPC64
-	select FSL_IFC
-	imply CMD_SATA
-	imply CMD_NAND
-	imply CMD_REGINFO
-	imply FSL_SATA
-
 config ARCH_T4240
 	bool
 	select E500MC
@@ -903,8 +871,7 @@ config NXP_ESBC
 config MAX_CPUS
 	int "Maximum number of CPUs permitted for MPC85xx"
 	default 12 if ARCH_T4240
-	default 8 if ARCH_P4080 || \
-		     ARCH_T4160
+	default 8 if ARCH_P4080
 	default 4 if ARCH_B4860 || \
 		     ARCH_P2041 || \
 		     ARCH_P3041 || \
@@ -962,7 +929,6 @@ config SYS_CCSRBAR_DEFAULT
 				ARCH_T1040	|| \
 				ARCH_T1042	|| \
 				ARCH_T2080	|| \
-				ARCH_T4160	|| \
 				ARCH_T4240
 	default 0xe0000000 if ARCH_QEMU_E500
 	help
@@ -1147,7 +1113,6 @@ config SYS_FSL_NUM_LAWS
 			ARCH_P4080	|| \
 			ARCH_P5040	|| \
 			ARCH_T2080	|| \
-			ARCH_T4160	|| \
 			ARCH_T4240
 	default 16 if	ARCH_T1024	|| \
 			ARCH_T1040	|| \
@@ -1232,7 +1197,6 @@ config SYS_FSL_IFC_CLK_DIV
 			ARCH_T1024	|| \
 			ARCH_T1040	|| \
 			ARCH_T1042	|| \
-			ARCH_T4160	|| \
 			ARCH_T4240
 	default 1
 	help
@@ -1267,7 +1231,6 @@ source "board/freescale/p2041rdb/Kconfig"
 source "board/freescale/qemu-ppce500/Kconfig"
 source "board/freescale/t208xqds/Kconfig"
 source "board/freescale/t208xrdb/Kconfig"
-source "board/freescale/t4rdb/Kconfig"
 source "board/keymile/Kconfig"
 source "board/sbc8548/Kconfig"
 source "board/socrates/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 4d9a07b5d9c3..ebd1bb667ea5 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_ARCH_P3041) += p3041_ids.o
 obj-$(CONFIG_ARCH_P4080) += p4080_ids.o
 obj-$(CONFIG_ARCH_P5040) += p5040_ids.o
 obj-$(CONFIG_ARCH_T4240) += t4240_ids.o
-obj-$(CONFIG_ARCH_T4160) += t4240_ids.o
 obj-$(CONFIG_ARCH_B4420) += b4860_ids.o
 obj-$(CONFIG_ARCH_B4860) += b4860_ids.o
 obj-$(CONFIG_ARCH_T1040) += t1040_ids.o
@@ -76,7 +75,6 @@ obj-$(CONFIG_ARCH_P3041) += p3041_serdes.o
 obj-$(CONFIG_ARCH_P4080) += p4080_serdes.o
 obj-$(CONFIG_ARCH_P5040) += p5040_serdes.o
 obj-$(CONFIG_ARCH_T4240) += t4240_serdes.o
-obj-$(CONFIG_ARCH_T4160) += t4240_serdes.o
 obj-$(CONFIG_ARCH_B4420) += b4860_serdes.o
 obj-$(CONFIG_ARCH_B4860) += b4860_serdes.o
 obj-$(CONFIG_ARCH_BSC9132) += bsc9132_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 7d168e3c9a0e..3f2fc062b2b0 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -527,8 +527,7 @@ static void fdt_fixup_usb(void *fdt)
 #define fdt_fixup_usb(x)
 #endif
 
-#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240) || \
-	defined(CONFIG_ARCH_T4160)
+#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T4240)
 void fdt_fixup_dma3(void *blob)
 {
 	/* the 3rd DMA is not functional if SRIO2 is chosen */
@@ -545,7 +544,7 @@ void fdt_fixup_dma3(void *blob)
 	case 0x29:
 	case 0x2d:
 	case 0x2e:
-#elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
+#elif defined(CONFIG_ARCH_T4240)
 	u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
 				    FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
 	srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index ee5015ec8f3e..5bf0047930fe 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -392,7 +392,7 @@ const char *serdes_clock_to_string(u32 clock)
 	case SRDS_PLLCR0_RFCK_SEL_161_13:
 		return "161.1328123";
 	default:
-#if defined(CONFIG_TARGET_T4240QDS) || defined(CONFIG_TARGET_T4160QDS)
+#if defined(CONFIG_TARGET_T4240QDS)
 		return "???";
 #else
 		return "122.88";
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 5a545a6d6412..89c56f9c606d 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -126,8 +126,7 @@ void get_sys_info(sys_info_t *sys_info)
 	 * it uses 6.
 	 * T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
 	 */
-#if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) || \
-	defined(CONFIG_ARCH_T2080)
+#if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T2080)
 	svr = get_svr();
 	switch (SVR_SOC_VER(svr)) {
 	case SVR_T4240:
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index a8c0c47f4af1..61402e84ef62 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -262,208 +262,6 @@ static const struct serdes_config serdes4_cfg_tbl[] = {
 	{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
 	{}
 };
-#elif defined(CONFIG_ARCH_T4160)
-static const struct serdes_config serdes1_cfg_tbl[] = {
-	/* SerDes 1 */
-	{1, {NONE, NONE, NONE, NONE,
-		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
-		XAUI_FM1_MAC10, XAUI_FM1_MAC10} },
-	{2, {NONE, NONE, NONE, NONE,
-		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
-		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
-	{4, {NONE, NONE, NONE, NONE,
-		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
-		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
-	{27, {NONE, NONE, NONE, NONE,
-		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
-	{28, {NONE, NONE, NONE, NONE,
-		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
-	{35, {NONE, NONE, NONE, NONE,
-		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
-	{36, {NONE, NONE, NONE, NONE,
-		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
-		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
-	{37, {NONE, NONE, NONE, NONE,
-		NONE, NONE, QSGMII_FM1_A, NONE} },
-	{38, {NONE, NONE, NONE, NONE,
-		NONE, NONE, QSGMII_FM1_A, NONE} },
-	{}
-};
-static const struct serdes_config serdes2_cfg_tbl[] = {
-	/* SerDes 2 */
-	{6, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{12, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{15, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{21, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{24, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		NONE, NONE} },
-	{27, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{35, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{37, {NONE, NONE, QSGMII_FM2_B, NONE,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{38, {NONE, NONE, QSGMII_FM2_B, NONE,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{39, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{45, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{47, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
-		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{49, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{51, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{53, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
-		NONE, NONE, QSGMII_FM2_A, NONE} },
-	{55, {NONE, XFI_FM1_MAC10,
-		XFI_FM2_MAC10, NONE,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{56, {NONE, XFI_FM1_MAC10,
-		XFI_FM2_MAC10, NONE,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
-	{57, {NONE, XFI_FM1_MAC10,
-		XFI_FM2_MAC10, NONE,
-		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
-		NONE, NONE} },
-	{}
-};
-static const struct serdes_config serdes3_cfg_tbl[] = {
-	/* SerDes 3 */
-	{1, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
-	{2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
-	{3, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
-	{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
-	{5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
-	{6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
-	{7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
-	{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
-	{9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
-	{10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
-	{11, {NONE, NONE, NONE, NONE,
-		PCIE2, PCIE2, PCIE2, PCIE2} },
-	{12, {NONE, NONE, NONE, NONE,
-		PCIE2, PCIE2, PCIE2, PCIE2} },
-	{13, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		PCIE2, PCIE2, PCIE2, PCIE2} },
-	{14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		PCIE2, PCIE2, PCIE2, PCIE2} },
-	{15, {NONE, NONE, NONE, NONE,
-		SRIO1, SRIO1, SRIO1, SRIO1} },
-	{16, {NONE, NONE, NONE, NONE,
-		SRIO1, SRIO1, SRIO1, SRIO1} },
-	{17, {NONE, NONE, NONE, NONE,
-		SRIO1, SRIO1, SRIO1, SRIO1} },
-	{18, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		SRIO1, SRIO1, SRIO1, SRIO1} },
-	{19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		SRIO1, SRIO1, SRIO1, SRIO1} },
-	{20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
-		SRIO1, SRIO1, SRIO1, SRIO1} },
-	{}
-};
-static const struct serdes_config serdes4_cfg_tbl[] = {
-	/* SerDes 4 */
-	{3, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} },
-	{4, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} },
-	{5, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
-	{6, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
-	{7, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
-	{8, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
-	{9, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} },
-	{10, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} },
-	{11, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} },
-	{12, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} },
-	{13, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
-	{14, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
-	{15, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
-	{16, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
-	{18, {NONE, NONE, NONE, NONE, AURORA, AURORA, AURORA, AURORA} },
-	{}
-}
-;
 #else
 #error "Need to define SerDes protocol"
 #endif
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index a52b31ec3950..6874692ae326 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -194,7 +194,7 @@
 #define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
 #define CONFIG_ESDHC_HC_BLK_ADDR
 
-#elif defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
+#elif defined(CONFIG_ARCH_T4240)
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
 #define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
@@ -209,9 +209,6 @@
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_SYS_NUM_FM2_DTSEC	8
 #define CONFIG_SYS_NUM_FM2_10GEC	1
-#if defined(CONFIG_ARCH_T4160)
-#define CONFIG_SYS_FSL_CLUSTER_CLOCKS	{ 1, 1 }
-#endif
 #endif
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	5
 #define CONFIG_SYS_FSL_SRDS_1
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 991d75312a34..3a1d858ec645 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -21,7 +21,6 @@
 
 #if defined(CONFIG_TARGET_B4860QDS) || \
 	defined(CONFIG_TARGET_B4420QDS) || \
-	defined(CONFIG_TARGET_T4160QDS) || \
 	defined(CONFIG_TARGET_T4240QDS) || \
 	defined(CONFIG_TARGET_T2080QDS) || \
 	defined(CONFIG_TARGET_T2080RDB) || \
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 1b3097772fb8..0c1c114c77b8 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1758,7 +1758,7 @@ typedef struct ccsr_gur {
 /* use reserved bits 18~23 as scratch space to host DDR PLL ratio */
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT	8
 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK	0x3f
-#if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
+#if defined(CONFIG_ARCH_T4240)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xfc000000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	26
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL		0x00fe0000
@@ -1870,7 +1870,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII          0x00100000
 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE         0x00180000
 #endif
-#if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160)
+#if defined(CONFIG_ARCH_T4240)
 #define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
 #define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII	0x00000000
 #define FSL_CORENET_RCWSR13_EC1_FM2_GPIO		0x40000000
diff --git a/board/freescale/t4rdb/Kconfig b/board/freescale/t4rdb/Kconfig
deleted file mode 100644
index a94a57e7feeb..000000000000
--- a/board/freescale/t4rdb/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-if TARGET_T4160RDB || TARGET_T4240RDB
-
-config SYS_BOARD
-	default "t4rdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "T4240RDB"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/t4rdb/MAINTAINERS b/board/freescale/t4rdb/MAINTAINERS
deleted file mode 100644
index 4ba5c3a546a3..000000000000
--- a/board/freescale/t4rdb/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-T4RDB BOARD
-#M:	Chunhe Lan <Chunhe.Lan at freescale.com>
-S:	Orphan (since 2018-05)
-F:	board/freescale/t4rdb/
-F:	include/configs/T4240RDB.h
-F:	configs/T4160RDB_defconfig
-F:	configs/T4240RDB_defconfig
-F:	configs/T4240RDB_SDCARD_defconfig
diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile
deleted file mode 100644
index 209983a24bd1..000000000000
--- a/board/freescale/t4rdb/Makefile
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# Copyright 2014 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-ifdef CONFIG_SPL_BUILD
-obj-y	+= spl.o
-else
-obj-$(CONFIG_TARGET_T4160RDB)	+= t4240rdb.o
-obj-$(CONFIG_TARGET_T4240RDB)	+= t4240rdb.o
-obj-y			+= cpld.o
-obj-y			+= eth.o
-obj-$(CONFIG_PCI)	+= pci.o
-endif
-
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/t4rdb/cpld.c b/board/freescale/t4rdb/cpld.c
deleted file mode 100644
index d484509bc20a..000000000000
--- a/board/freescale/t4rdb/cpld.c
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/**
- * Copyright 2014 Freescale Semiconductor
- *
- * Author: Chunhe Lan <Chunhe.Lan at freescale.com>
- *
- * This file provides support for the board-specific CPLD used on some Freescale
- * reference boards.
- *
- * The following macros need to be defined:
- *
- * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the
- * CPLD register map
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#include "cpld.h"
-
-u8 cpld_read(unsigned int reg)
-{
-	void *p = (void *)CONFIG_SYS_CPLD_BASE;
-
-	return in_8(p + reg);
-}
-
-void cpld_write(unsigned int reg, u8 value)
-{
-	void *p = (void *)CONFIG_SYS_CPLD_BASE;
-
-	out_8(p + reg, value);
-}
-
-/**
- * Set the boot bank to the alternate bank
- */
-void cpld_set_altbank(void)
-{
-	u8 val, curbank, altbank, override;
-
-	val = CPLD_READ(vbank);
-	curbank = val & CPLD_BANK_SEL_MASK;
-
-	switch (curbank) {
-	case CPLD_SELECT_BANK0:
-	case CPLD_SELECT_BANK4:
-		altbank = CPLD_SELECT_BANK4;
-		CPLD_WRITE(vbank, altbank);
-		override = CPLD_READ(software_on);
-		CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN);
-		CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET);
-		break;
-	default:
-		printf("CPLD Altbank Fail: Invalid value!\n");
-		return;
-	}
-}
-
-/**
- * Set the boot bank to the default bank
- */
-void cpld_set_defbank(void)
-{
-	u8 val;
-
-	val = CPLD_DEFAULT_BANK;
-
-	CPLD_WRITE(global_reset, val);
-}
-
-#ifdef DEBUG
-static void cpld_dump_regs(void)
-{
-	printf("chip_id1	= 0x%02x\n", CPLD_READ(chip_id1));
-	printf("chip_id2	= 0x%02x\n", CPLD_READ(chip_id2));
-	printf("sw_maj_ver	= 0x%02x\n", CPLD_READ(sw_maj_ver));
-	printf("sw_min_ver	= 0x%02x\n", CPLD_READ(sw_min_ver));
-	printf("hw_ver		= 0x%02x\n", CPLD_READ(hw_ver));
-	printf("software_on	= 0x%02x\n", CPLD_READ(software_on));
-	printf("cfg_rcw_src	= 0x%02x\n", CPLD_READ(cfg_rcw_src));
-	printf("res0		= 0x%02x\n", CPLD_READ(res0));
-	printf("vbank		= 0x%02x\n", CPLD_READ(vbank));
-	printf("sw1_sysclk	= 0x%02x\n", CPLD_READ(sw1_sysclk));
-	printf("sw2_status	= 0x%02x\n", CPLD_READ(sw2_status));
-	printf("sw3_status	= 0x%02x\n", CPLD_READ(sw3_status));
-	printf("sw4_status	= 0x%02x\n", CPLD_READ(sw4_status));
-	printf("sys_reset	= 0x%02x\n", CPLD_READ(sys_reset));
-	printf("global_reset	= 0x%02x\n", CPLD_READ(global_reset));
-	printf("res1		= 0x%02x\n", CPLD_READ(res1));
-	putc('\n');
-}
-#endif
-
-#ifndef CONFIG_SPL_BUILD
-int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
-	int rc = 0;
-
-	if (argc <= 1)
-		return cmd_usage(cmdtp);
-
-	if (strcmp(argv[1], "reset") == 0) {
-		if (strcmp(argv[2], "altbank") == 0)
-			cpld_set_altbank();
-		else
-			cpld_set_defbank();
-#ifdef DEBUG
-	} else if (strcmp(argv[1], "dump") == 0) {
-		cpld_dump_regs();
-#endif
-	} else
-		rc = cmd_usage(cmdtp);
-
-	return rc;
-}
-
-U_BOOT_CMD(
-	cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
-	"Reset the board or alternate bank",
-	"reset - reset to default bank\n"
-	"cpld reset altbank - reset to alternate bank\n"
-#ifdef DEBUG
-	"cpld dump - display the CPLD registers\n"
-#endif
-	);
-#endif
diff --git a/board/freescale/t4rdb/cpld.h b/board/freescale/t4rdb/cpld.h
deleted file mode 100644
index dc3f9f3c26ca..000000000000
--- a/board/freescale/t4rdb/cpld.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/**
- * Copyright 2014 Freescale Semiconductor
- *
- * Author: Chunhe Lan <Chunhe.Lan at freescale.com>
- *
- * This file provides support for the ngPIXIS, a board-specific FPGA used on
- * some Freescale reference boards.
- */
-
-/*
- * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
- */
-struct cpld_data {
-	u8 chip_id1;	/* 0x00 - CPLD Chip ID1 Register */
-	u8 chip_id2;	/* 0x01 - CPLD Chip ID2 Register */
-	u8 sw_maj_ver;	/* 0x02 - CPLD Code Major Version Register */
-	u8 sw_min_ver;	/* 0x03 - CPLD Code Minor Version Register */
-	u8 hw_ver;	/* 0x04 - PCBA Version Register */
-	u8 software_on;	/* 0x05 - Override Physical Switch Enable Register */
-	u8 cfg_rcw_src;	/* 0x06 - RCW Source Location Control Register */
-	u8 res0;	/* 0x07 - not used */
-	u8 vbank;	/* 0x08 - Flash Bank Selection Control Register */
-	u8 sw1_sysclk;	/* 0x09 - SW1 Status Read Back Register */
-	u8 sw2_status;	/* 0x0a - SW2 Status Read Back Register */
-	u8 sw3_status;	/* 0x0b - SW3 Status Read Back Register */
-	u8 sw4_status;	/* 0x0c - SW4 Status Read Back Register */
-	u8 sys_reset;	/* 0x0d - Reset System With Reserving Registers Value*/
-	u8 global_reset;/* 0x0e - Reset System With Default Registers Value */
-	u8 res1;	/* 0x0f - not used */
-};
-
-#define CPLD_BANK_SEL_MASK	0x07
-#define CPLD_BANK_SEL_EN	0x04
-#define CPLD_SYSTEM_RESET	0x01
-#define CPLD_SELECT_BANK0	0x00
-#define CPLD_SELECT_BANK4	0x04
-#define CPLD_DEFAULT_BANK	0x01
-
-/* Pointer to the CPLD register set */
-
-u8 cpld_read(unsigned int reg);
-void cpld_write(unsigned int reg, u8 value);
-
-#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
-#define CPLD_WRITE(reg, value) \
-		cpld_write(offsetof(struct cpld_data, reg), value)
-
diff --git a/board/freescale/t4rdb/ddr.c b/board/freescale/t4rdb/ddr.c
deleted file mode 100644
index 57cbde154f0e..000000000000
--- a/board/freescale/t4rdb/ddr.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-#include "ddr.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
-	ulong ddr_freq;
-
-	if (ctrl_num > 2) {
-		printf("Not supported controller number %d\n", ctrl_num);
-		return;
-	}
-	if (!pdimm->n_ranks)
-		return;
-
-	/*
-	 * we use identical timing for all slots. If needed, change the code
-	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
-	 */
-	if (popts->registered_dimm_en)
-		pbsp = rdimms[0];
-	else
-		pbsp = udimms[0];
-
-
-	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
-	 * freqency and n_banks specified in board_specific_parameters table.
-	 */
-	ddr_freq = get_ddr_freq(0) / 1000000;
-	while (pbsp->datarate_mhz_high) {
-		if (pbsp->n_ranks == pdimm->n_ranks &&
-		    (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
-			if (ddr_freq <= pbsp->datarate_mhz_high) {
-				popts->clk_adjust = pbsp->clk_adjust;
-				popts->wrlvl_start = pbsp->wrlvl_start;
-				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
-				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-				goto found;
-			}
-			pbsp_highest = pbsp;
-		}
-		pbsp++;
-	}
-
-	if (pbsp_highest) {
-		printf("Error: board specific timing not found for data\n"
-			"rate %lu MT/s\n"
-			"Trying to use the highest speed (%u) parameters\n",
-			ddr_freq, pbsp_highest->datarate_mhz_high);
-		popts->clk_adjust = pbsp_highest->clk_adjust;
-		popts->wrlvl_start = pbsp_highest->wrlvl_start;
-		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
-		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
-	} else {
-		panic("DIMM is not supported by this board");
-	}
-found:
-	debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
-		"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x,\n"
-		"wrlvl_ctrl_3 0x%x\n",
-		pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
-		pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
-		pbsp->wrlvl_ctl_3);
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-	/*
-	 * Write leveling override
-	 */
-	popts->wrlvl_override = 1;
-	popts->wrlvl_sample = 0xf;
-
-	/*
-	 * Rtt and Rtt_WR override
-	 */
-	popts->rtt_override = 0;
-
-	/* Enable ZQ calibration */
-	popts->zq_en = 1;
-
-	/* DHC_EN =1, ODT = 75 Ohm */
-	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
-	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-
-	/* optimize cpo for erratum A-009942 */
-	popts->cpo_sample = 0x64;
-}
-
-int dram_init(void)
-{
-	phys_size_t dram_size;
-
-	puts("Initializing....using SPD\n");
-
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
-	dram_size = fsl_ddr_sdram();
-#else
-	/* DDR has been initialised by first stage boot loader */
-	dram_size = fsl_ddr_sdram_size();
-#endif
-	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-	dram_size *= 0x100000;
-
-	gd->ram_size = dram_size;
-
-	return 0;
-}
diff --git a/board/freescale/t4rdb/ddr.h b/board/freescale/t4rdb/ddr.h
deleted file mode 100644
index 74a277961144..000000000000
--- a/board/freescale/t4rdb/ddr.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DDR_H__
-#define __DDR_H__
-struct board_specific_parameters {
-	u32 n_ranks;
-	u32 datarate_mhz_high;
-	u32 rank_gb;
-	u32 clk_adjust;
-	u32 wrlvl_start;
-	u32 wrlvl_ctl_2;
-	u32 wrlvl_ctl_3;
-};
-
-/*
- * These tables contain all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_parameters udimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
-	 */
-	{2,  1350, 4,  8,     8, 0x0809090b, 0x0c0c0d0a},
-	{2,  1350, 0, 10,     7, 0x0709090b, 0x0c0c0d09},
-	{2,  1666, 4,  8,     8, 0x080a0a0d, 0x0d10100b},
-	{2,  1666, 0, 10,     7, 0x080a0a0c, 0x0d0d0e0a},
-	{2,  1900, 0,  8,     8, 0x090a0b0e, 0x0f11120c},
-	{2,  2140, 0,  8,     8, 0x090a0b0e, 0x0f11120c},
-	{1,  1350, 0, 10,     8, 0x0809090b, 0x0c0c0d0a},
-	{1,  1700, 0, 10,     8, 0x080a0a0c, 0x0c0d0e0a},
-	{1,  1900, 0,  8,     8, 0x080a0a0c, 0x0e0e0f0a},
-	{1,  2140, 0,  8,     8, 0x090a0b0c, 0x0e0f100b},
-	{}
-};
-
-static const struct board_specific_parameters rdimm0[] = {
-	/*
-	 * memory controller 0
-	 *   num|  hi| rank|  clk| wrlvl |   wrlvl   |  wrlvl
-	 * ranks| mhz| GB  |adjst| start |   ctl2    |  ctl3
-	 */
-	{4,  1350, 0, 10,     9, 0x08070605, 0x06070806},
-	{4,  1666, 0, 10,    11, 0x0a080706, 0x07090906},
-	{4,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07},
-	{2,  1350, 0, 10,     9, 0x08070605, 0x06070806},
-	{2,  1666, 0, 10,    11, 0x0a090806, 0x08090a06},
-	{2,  2140, 0, 10,    12, 0x0b090807, 0x080a0b07},
-	{1,  1350, 0, 10,     9, 0x08070605, 0x06070806},
-	{1,  1666, 0, 10,    11, 0x0a090806, 0x08090a06},
-	{1,  2140, 0,  8,    12, 0x0b090807, 0x080a0b07},
-	{}
-};
-
-/*
- * The three slots have slightly different timing. The center values are good
- * for all slots. We use identical speed tables for them. In future use, if
- * DIMMs require separated tables, make more entries as needed.
- */
-static const struct board_specific_parameters *udimms[] = {
-	udimm0,
-};
-
-/*
- * The three slots have slightly different timing. See comments above.
- */
-static const struct board_specific_parameters *rdimms[] = {
-	rdimm0,
-};
-
-
-#endif
diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c
deleted file mode 100644
index c815a3a4fa52..000000000000
--- a/board/freescale/t4rdb/eth.c
+++ /dev/null
@@ -1,152 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * Chunhe Lan <Chunhe.Lan at freescale.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <fdt_support.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <fsl_dtsec.h>
-#include <asm/fsl_serdes.h>
-#include <hwconfig.h>
-
-#include "../common/fman.h"
-#include "t4rdb.h"
-
-void fdt_fixup_board_enet(void *fdt)
-{
-	return;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_FMAN_ENET)
-	int i, interface;
-	struct memac_mdio_info dtsec_mdio_info;
-	struct memac_mdio_info tgec_mdio_info;
-	struct mii_dev *dev;
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	u32 srds_prtcl_s1, srds_prtcl_s2;
-
-	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
-	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
-	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
-	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
-
-	dtsec_mdio_info.regs =
-		(struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
-
-	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
-	/* Register the 1G MDIO bus */
-	fm_memac_mdio_init(bis, &dtsec_mdio_info);
-
-	tgec_mdio_info.regs =
-		(struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
-	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
-
-	/* Register the 10G MDIO bus */
-	fm_memac_mdio_init(bis, &tgec_mdio_info);
-
-	if ((srds_prtcl_s1 == 28) || (srds_prtcl_s1 == 27)) {
-		/* SGMII */
-		fm_info_set_phy_address(FM1_DTSEC1, SGMII_PHY_ADDR1);
-		fm_info_set_phy_address(FM1_DTSEC2, SGMII_PHY_ADDR2);
-		fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY_ADDR3);
-		fm_info_set_phy_address(FM1_DTSEC4, SGMII_PHY_ADDR4);
-	} else {
-		puts("Invalid SerDes1 protocol for T4240RDB\n");
-	}
-
-	fm_disable_port(FM1_DTSEC5);
-	fm_disable_port(FM1_DTSEC6);
-
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
-		interface = fm_info_get_enet_if(i);
-		switch (interface) {
-		case PHY_INTERFACE_MODE_SGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-
-	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_XGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-	if ((srds_prtcl_s2 == 56) || (srds_prtcl_s2 == 55)) {
-		/* SGMII && XFI */
-		fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5);
-		fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6);
-		fm_info_set_phy_address(FM2_DTSEC3, SGMII_PHY_ADDR7);
-		fm_info_set_phy_address(FM2_DTSEC4, SGMII_PHY_ADDR8);
-		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC2_PHY_ADDR);
-		fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC1_PHY_ADDR);
-	} else {
-		puts("Invalid SerDes2 protocol for T4240RDB\n");
-	}
-
-	fm_disable_port(FM2_DTSEC5);
-	fm_disable_port(FM2_DTSEC6);
-	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
-		interface = fm_info_get_enet_if(i);
-		switch (interface) {
-		case PHY_INTERFACE_MODE_SGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-
-	for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
-		switch (fm_info_get_enet_if(i)) {
-		case PHY_INTERFACE_MODE_XGMII:
-			dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
-			fm_info_set_mdio(i, dev);
-			break;
-		default:
-			break;
-		}
-	}
-#endif /* CONFIG_SYS_NUM_FMAN */
-
-	cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
-	return pci_eth_init(bis);
-}
diff --git a/board/freescale/t4rdb/law.c b/board/freescale/t4rdb/law.c
deleted file mode 100644
index 038f60565f7e..000000000000
--- a/board/freescale/t4rdb/law.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
-	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
-	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
-#endif
-#ifdef CONFIG_SYS_CPLD_BASE_PHYS
-	SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-	/* Limit DCSR to 32M to access NPC Trace Buffer */
-	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t4rdb/pci.c b/board/freescale/t4rdb/pci.c
deleted file mode 100644
index c2bc05164dd1..000000000000
--- a/board/freescale/t4rdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
-	FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t4rdb/spl.c b/board/freescale/t4rdb/spl.c
deleted file mode 100644
index e2f9c9b3de29..000000000000
--- a/board/freescale/t4rdb/spl.c
+++ /dev/null
@@ -1,98 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * Author: Chunhe Lan <Chunhe.Lan at freescale.com>
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env_internal.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/spl.h>
-#include <malloc.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <i2c.h>
-
-#include "t4rdb.h"
-
-#define FSL_CORENET_CCSR_PORSR1_RCW_MASK	0xFF800000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L3_SIZE;
-}
-
-unsigned long get_board_sys_clk(void)
-{
-	return CONFIG_SYS_CLK_FREQ;
-}
-
-unsigned long get_board_ddr_clk(void)
-{
-	return CONFIG_DDR_CLK_FREQ;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, sys_clk, ccb_clk;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
-	memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
-
-	/* Update GD pointer */
-	gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
-
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("" : : : "memory");
-
-	console_init_f();
-
-	/* initialize selected port with appropriate baud rate */
-	sys_clk = get_board_sys_clk();
-	plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
-	ccb_clk = sys_clk * plat_ratio / 2;
-
-	ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1,
-		     ccb_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nSD boot...\n");
-
-	relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	struct bd_info *bd;
-
-	bd = (struct bd_info *)(gd + sizeof(gd_t));
-	memset(bd, 0, sizeof(struct bd_info));
-	gd->bd = bd;
-
-	arch_cpu_init();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-	gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-
-	mmc_initialize(bd);
-	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)SPL_ENV_ADDR);
-
-	gd->env_addr  = (ulong)(SPL_ENV_ADDR);
-	gd->env_valid = ENV_VALID;
-
-	i2c_init_all();
-
-	dram_init();
-
-	mmc_boot();
-}
diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c
deleted file mode 100644
index 6ab35ca9185b..000000000000
--- a/board/freescale/t4rdb/t4240rdb.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <image.h>
-#include <init.h>
-#include <netdev.h>
-#include <asm/global_data.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-
-#include "t4rdb.h"
-#include "cpld.h"
-#include "../common/vid.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	struct cpu_type *cpu = gd->arch.cpu;
-	u8 sw;
-
-	printf("Board: %sRDB, ", cpu->name);
-	printf("Board rev: 0x%02x CPLD ver: 0x%02x%02x, ",
-	       CPLD_READ(hw_ver), CPLD_READ(sw_maj_ver), CPLD_READ(sw_min_ver));
-
-	sw = CPLD_READ(vbank);
-	sw = sw & CPLD_BANK_SEL_MASK;
-
-	if (sw <= 7)
-		printf("vBank: %d\n", sw);
-	else
-		printf("Unsupported Bank=%x\n", sw);
-
-	puts("SERDES Reference Clocks:\n");
-	printf("       SERDES1=100MHz SERDES2=156.25MHz\n"
-	       "       SERDES3=100MHz SERDES4=100MHz\n");
-
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
-	/*
-	 * Remap Boot flash + PROMJET region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash + promjet */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-		MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
-	/*
-	 * Adjust core voltage according to voltage ID
-	 * This function changes I2C mux to channel 2.
-	*/
-	if (adjust_vdd(0))
-		printf("Warning: Adjusting core voltage failed.\n");
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-	return 0;
-}
-
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = env_get_bootm_low();
-	size = env_get_bootm_size();
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_PCI
-	pci_of_setup(blob, bd);
-#endif
-
-	fdt_fixup_liodn(blob);
-	fsl_fdt_fixup_dr_usb(blob, bd);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-#ifndef CONFIG_DM_ETH
-	fdt_fixup_fman_ethernet(blob);
-#endif
-	fdt_fixup_board_enet(blob);
-#endif
-
-	return 0;
-}
-
-/*
- * This function is called by bdinfo to print detail board information.
- * As an exmaple for future board, we organize the messages into
- * several sections. If applicable, the message is in the format of
- * <name>      = <value>
- * It should aligned with normal output of bdinfo command.
- *
- * Voltage: Core, DDR and another configurable voltages
- * Clock  : Critical clocks which are not printed already
- * RCW    : RCW source if not printed already
- * Misc   : Other important information not in above catagories
- */
-void board_detail(void)
-{
-	int rcwsrc;
-
-	/* RCW section SW3[4] */
-	rcwsrc = 0x0;
-	puts("RCW source  = ");
-	switch (rcwsrc & 0x1) {
-	case 0x1:
-		puts("SDHC/eMMC\n");
-		break;
-	default:
-		puts("I2C normal addressing\n");
-		break;
-	}
-}
diff --git a/board/freescale/t4rdb/t4_pbi.cfg b/board/freescale/t4rdb/t4_pbi.cfg
deleted file mode 100644
index 0b326fa1635a..000000000000
--- a/board/freescale/t4rdb/t4_pbi.cfg
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright 2014 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-#PBI commands
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#512KB SRAM
-09010100 00000000
-09010104 fff80009
-09010f00 08000000
-#enable CPC1
-09010000 80000000
-#Configure LAW for CPC1
-09000d00 00000000
-09000d04 fff80000
-09000d08 81000012
-#Configure alternate space
-09000010 00000000
-09000014 ff000000
-09000018 81000000
-#Flush PBL data
-091380c0 00100000
diff --git a/board/freescale/t4rdb/t4_sd_rcw.cfg b/board/freescale/t4rdb/t4_sd_rcw.cfg
deleted file mode 100644
index cc2bff68269c..000000000000
--- a/board/freescale/t4rdb/t4_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-#serdes protocol  27_55_1_9
-16070019 18101916 00000000 00000000
-6c6e0848 00448c00 6c020000 f5000000
-00000000 ee0000ee 00000000 000307fc
-00000000 00000000 00000000 00000028
diff --git a/board/freescale/t4rdb/t4rdb.h b/board/freescale/t4rdb/t4rdb.h
deleted file mode 100644
index 3f1fa7bbd24e..000000000000
--- a/board/freescale/t4rdb/t4rdb.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#ifndef __T4RDB_H__
-#define __T4RDB_H__
-
-#undef CONFIG_SYS_NUM_FM1_DTSEC
-#undef CONFIG_SYS_NUM_FM2_DTSEC
-#define CONFIG_SYS_NUM_FM1_DTSEC	4
-#define CONFIG_SYS_NUM_FM2_DTSEC	4
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, struct bd_info *bd);
-
-#endif
diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c
deleted file mode 100644
index b927dd8484f8..000000000000
--- a/board/freescale/t4rdb/tlb.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
-	/*
-	 * *I*G - L3SRAM. When L3 is used as 512K SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_512K, 1),
-#else
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_4K, 1),
-#endif
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_16M, 1),
-
-	/* *I*G* - Flash, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
-		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
-		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_256K, 1),
-
-	/* Bman/Qman */
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 9, BOOKE_PAGESZ_16M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
-		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 10, BOOKE_PAGESZ_16M, 1),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 11, BOOKE_PAGESZ_16M, 1),
-	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
-		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 12, BOOKE_PAGESZ_16M, 1),
-#endif
-#endif
-
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
-	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 13, BOOKE_PAGESZ_32M, 1),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE
-	/*
-	 * *I*G - NAND
-	 * entry 14 and 15 has been used hard coded, they will be disabled
-	 * in cpu_init_f, so we use entry 16 for nand.
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 16, BOOKE_PAGESZ_64K, 1),
-#endif
-#ifdef CONFIG_SYS_CPLD_BASE
-	SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
-		      MAS3_SW|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 17, BOOKE_PAGESZ_4K, 1),
-#endif
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-		      0, 18, BOOKE_PAGESZ_2G, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/T4160RDB_defconfig b/configs/T4160RDB_defconfig
deleted file mode 100644
index 706d6a2367d5..000000000000
--- a/configs/T4160RDB_defconfig
+++ /dev/null
@@ -1,57 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4160RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_CORTINA=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig
deleted file mode 100644
index 61670fa3d14d..000000000000
--- a/configs/T4240RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="t4240rdb"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_CORTINA=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig
deleted file mode 100644
index 2c8a2f0ef271..000000000000
--- a/configs/T4240RDB_defconfig
+++ /dev/null
@@ -1,66 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="t4240rdb"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T4240RDB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLIB_10G=y
-CONFIG_PHY_CORTINA=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/drivers/ddr/fsl/Kconfig b/drivers/ddr/fsl/Kconfig
index 8b480dfd6901..19c26572ddcc 100644
--- a/drivers/ddr/fsl/Kconfig
+++ b/drivers/ddr/fsl/Kconfig
@@ -46,8 +46,7 @@ config SYS_NUM_DDR_CTLRS
 			ARCH_P4080	|| \
 			ARCH_P5040	|| \
 			ARCH_LX2160A	|| \
-			ARCH_LX2162A	|| \
-			ARCH_T4160
+			ARCH_LX2162A
 	default 1
 
 config SYS_FSL_DDR_VER
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4ff35c4df591..80bf3db50d02 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -713,7 +713,6 @@ config SYS_DPAA_QBMAN
 		     ARCH_T1042 || \
 		     ARCH_T2080 || \
 		     ARCH_T4240 || \
-		     ARCH_T4160 || \
 		     ARCH_P4080 || \
 		     ARCH_P3041 || \
 		     ARCH_P5040 || \
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index c988e4e9257f..ae3841217663 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -26,7 +26,6 @@ obj-$(CONFIG_ARCH_T1042)	+= t1040.o
 obj-$(CONFIG_ARCH_T1024) += t1024.o
 obj-$(CONFIG_ARCH_T2080) += t2080.o
 obj-$(CONFIG_ARCH_T4240) += t4240.o
-obj-$(CONFIG_ARCH_T4160) += t4240.o
 obj-$(CONFIG_ARCH_B4420) += b4860.o
 obj-$(CONFIG_ARCH_B4860) += b4860.o
 obj-$(CONFIG_ARCH_LS1043A)	+= ls1043.o
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
deleted file mode 100644
index 7f831fb8bca5..000000000000
--- a/include/configs/T4240RDB.h
+++ /dev/null
@@ -1,667 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-/*
- * T4240 RDB board configuration file
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-#define CONFIG_FSL_SATA_V2
-#define CONFIG_PCIE4
-
-#define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
-
-#ifdef CONFIG_RAMBOOT_PBL
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg
-#ifndef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
-#define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
-#else
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_PAD_TO		0x40000
-#define CONFIG_SPL_MAX_SIZE		0x28000
-#define RESET_VECTOR_OFFSET		0x27FFC
-#define BOOT_PAGE_OFFSET		0x27000
-
-#ifdef	CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS	0x200FFC
-#define CONFIG_SYS_MMC_U_BOOT_SIZE	(768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST	0x00200000
-#define CONFIG_SYS_MMC_U_BOOT_START	0x00200000
-#define CONFIG_SYS_MMC_U_BOOT_OFFS	(260 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_SKIP_RELOCATE
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#endif
-
-#endif
-#endif /* CONFIG_RAMBOOT_PBL */
-
-#define CONFIG_DDR_ECC
-
-/* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
-#endif
-
-#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC		CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1			/* PCIE controller 1 */
-#define CONFIG_PCIE2			/* PCIE controller 2 */
-#define CONFIG_PCIE3			/* PCIE controller 3 */
-#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BTB			/* toggle branch predition */
-#ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
-#endif
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-/*
- *  Config the L3 Cache as L3 SRAM
- */
-#define CONFIG_SYS_INIT_L3_ADDR		0xFFFC0000
-#define CONFIG_SYS_L3_SIZE		(512 << 10)
-#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
-#define SPL_ENV_ADDR			(CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE	(50 << 10)
-#define CONFIG_SPL_RELOC_STACK		(CONFIG_SPL_GD_ADDR + 64 * 1024)
-
-#define CONFIG_SYS_DCSRBAR		0xf0000000
-#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
-
-/*
- * DDR Setup
- */
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	4
-
-#define CONFIG_DDR_SPD
-
-/*
- * IFC Definitions
- */
-#define CONFIG_SYS_FLASH_BASE	0xe0000000
-#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
-#endif
-
-#define CONFIG_HWCONFIG
-
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe03c000
-/* The assembler doesn't like typecast */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
-	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
-	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
-#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
-					GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
-
-#define CONFIG_SYS_BAUDRATE_TABLE	\
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
-#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
-#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
-
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x118000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x118100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER	0
-#endif
-
-#define CONFIG_SYS_I2C_FSL
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-/* controller 1, direct to uli, tgtid 3, Base address 20000 */
-#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
-#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
-
-/* controller 2, Slot 2, tgtid 2, Base address 201000 */
-#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
-#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
-#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
-
-/* controller 3, Slot 1, tgtid 1, Base address 202000 */
-#define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
-#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
-#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
-
-/* controller 4, Base address 203000 */
-#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
-#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
-
-#ifdef CONFIG_PCI
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT	/* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000      /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE	0x20000000	/* 512M */
-#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#endif	/* CONFIG_PCI */
-
-/* SATA */
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
-
-#ifdef CONFIG_FMAN_ENET
-#define CONFIG_ETHPRIME		"FM1 at DTSEC1"
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO		/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ROOTPATH		"/opt/nfsroot"
-#define CONFIG_BOOTFILE		"uImage"
-#define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR		1000000
-
-#define CONFIG_HVBOOT					\
-	"setenv bootargs config-addr=0x60000000; "	\
-	"bootm 0x01000000 - 0x00f00000"
-
-#define CONFIG_SYS_CLK_FREQ	66666666
-#define CONFIG_DDR_CLK_FREQ	133333333
-
-#ifndef __ASSEMBLY__
-unsigned long get_board_sys_clk(void);
-unsigned long get_board_ddr_clk(void);
-#endif
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SPD_BUS_NUM	0
-#define SPD_EEPROM_ADDRESS1	0x52
-#define SPD_EEPROM_ADDRESS2	0x54
-#define SPD_EEPROM_ADDRESS3	0x56
-#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1	/* for p3041/p5010 */
-#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
-
-/*
- * IFC Definitions
- */
-#define CONFIG_SYS_NOR0_CSPR_EXT	(0xf)
-#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
-				+ 0x8000000) | \
-				CSPR_PORT_SIZE_16 | \
-				CSPR_MSEL_NOR | \
-				CSPR_V)
-#define CONFIG_SYS_NOR1_CSPR_EXT	(0xf)
-#define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
-				CSPR_PORT_SIZE_16 | \
-				CSPR_MSEL_NOR | \
-				CSPR_V)
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
-/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
-
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
-				FTIM0_NOR_TEADC(0x5) | \
-				FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
-				FTIM1_NOR_TRAD_NOR(0x1A) |\
-				FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
-				FTIM2_NOR_TCH(0x4) | \
-				FTIM2_NOR_TWPH(0x0E) | \
-				FTIM2_NOR_TWP(0x1c))
-#define CONFIG_SYS_NOR_FTIM3	0x0
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS \
-					+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
-
-/* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_MAX_ECCPOS	256
-#define CONFIG_SYS_NAND_MAX_OOBFREE	2
-#define CONFIG_SYS_NAND_BASE		0xff800000
-#define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
-
-#define CONFIG_SYS_NAND_CSPR_EXT	(0xf)
-#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
-				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
-				| CSPR_V)
-#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
-
-#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
-				| CSOR_NAND_RAL_3	/* RAL = 2Byes */ \
-				| CSOR_NAND_PGS_4K	/* Page Size = 4K */ \
-				| CSOR_NAND_SPRZ_224	/* Spare size = 224 */ \
-				| CSOR_NAND_PB(128))	/*Page Per Block = 128*/
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
-					FTIM0_NAND_TWP(0x18)   | \
-					FTIM0_NAND_TWCHT(0x07) | \
-					FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
-					FTIM1_NAND_TWBE(0x39)  | \
-					FTIM1_NAND_TRR(0x0e)   | \
-					FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
-					FTIM2_NAND_TREH(0x0a) | \
-					FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3		0x0
-
-#define CONFIG_SYS_NAND_DDR_LAW		11
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(512 * 1024)
-
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
-#endif
-#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR1_CSPR_EXT
-#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR1_CSPR
-#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
-
-/* CPLD on IFC */
-#define CONFIG_SYS_CPLD_BASE	0xffdf0000
-#define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_CPLD_BASE)
-#define CONFIG_SYS_CSPR3_EXT	(0xf)
-#define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 \
-				| CSPR_MSEL_GPCM \
-				| CSPR_V)
-
-#define CONFIG_SYS_AMASK3	IFC_AMASK(64 * 1024)
-#define CONFIG_SYS_CSOR3	0x0
-
-/* CPLD Timing parameters for IFC CS3 */
-#define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
-					FTIM0_GPCM_TEADC(0x0e) | \
-					FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
-					FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
-					FTIM2_GPCM_TCH(0x8) | \
-					FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS3_FTIM3		0x0
-
-#if defined(CONFIG_RAMBOOT_PBL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/* I2C */
-#define CONFIG_SYS_FSL_I2C_SPEED	100000	/* I2C speed */
-#define CONFIG_SYS_FSL_I2C2_SPEED	100000	/* I2C2 speed */
-#define I2C_MUX_PCA_ADDR_PRI		0x77 /* I2C bus multiplexer,primary */
-#define I2C_MUX_PCA_ADDR_SEC		0x76 /* I2C bus multiplexer,secondary */
-
-#define I2C_MUX_CH_DEFAULT	0x8
-#define I2C_MUX_CH_VOL_MONITOR	0xa
-#define I2C_MUX_CH_VSC3316_FS	0xc
-#define I2C_MUX_CH_VSC3316_BS	0xd
-
-/* Voltage monitor on channel 2*/
-#define I2C_VOL_MONITOR_ADDR		0x40
-#define I2C_VOL_MONITOR_BUS_V_OFFSET	0x2
-#define I2C_VOL_MONITOR_BUS_V_OVF	0x1
-#define I2C_VOL_MONITOR_BUS_V_SHIFT	3
-
-#define CONFIG_VID_FLS_ENV		"t4240rdb_vdd_mv"
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_VID
-#endif
-#define CONFIG_VOL_MONITOR_IR36021_SET
-#define CONFIG_VOL_MONITOR_IR36021_READ
-/* The lowest and highest voltage allowed for T4240RDB */
-#define VDD_MV_MIN			819
-#define VDD_MV_MAX			1212
-
-/*
- * eSPI - Enhanced SPI
- */
-
-/* Qman/Bman */
-#ifndef CONFIG_NOBQFMAN
-#define CONFIG_SYS_BMAN_NUM_PORTALS	50
-#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
-#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
-#define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
-#define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
-#define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
-#define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
-#define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
-					CONFIG_SYS_BMAN_CENA_SIZE)
-#define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
-#define CONFIG_SYS_QMAN_NUM_PORTALS	50
-#define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
-#define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
-#define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
-#define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
-#define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
-#define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
-#define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
-					CONFIG_SYS_QMAN_CENA_SIZE)
-#define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_SWP_ISDR_REG	0xE08
-
-#define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_DPAA_PME
-#define CONFIG_SYS_PMAN
-#define CONFIG_SYS_DPAA_DCE
-#define CONFIG_SYS_DPAA_RMAN
-#define CONFIG_SYS_INTERLAKEN
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR	(512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR	(8 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR	0xEFF00000
-#endif
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
-#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#endif /* CONFIG_NOBQFMAN */
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-#define CONFIG_CORTINA_FW_ADDR		0xefe00000
-#define CONFIG_CORTINA_FW_LENGTH	0x40000
-#define SGMII_PHY_ADDR1 0x0
-#define SGMII_PHY_ADDR2 0x1
-#define SGMII_PHY_ADDR3 0x2
-#define SGMII_PHY_ADDR4 0x3
-#define SGMII_PHY_ADDR5 0x4
-#define SGMII_PHY_ADDR6 0x5
-#define SGMII_PHY_ADDR7 0x6
-#define SGMII_PHY_ADDR8 0x7
-#define FM1_10GEC1_PHY_ADDR	0x10
-#define FM1_10GEC2_PHY_ADDR	0x11
-#define FM2_10GEC1_PHY_ADDR	0x12
-#define FM2_10GEC2_PHY_ADDR	0x13
-#define CORTINA_PHY_ADDR1	FM1_10GEC1_PHY_ADDR
-#define CORTINA_PHY_ADDR2	FM1_10GEC2_PHY_ADDR
-#define CORTINA_PHY_ADDR3	FM2_10GEC1_PHY_ADDR
-#define CORTINA_PHY_ADDR4	FM2_10GEC2_PHY_ADDR
-#endif
-
-/* SATA */
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
-#define CONFIG_SATA2
-#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
-#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
-
-#ifdef CONFIG_FMAN_ENET
-#define CONFIG_ETHPRIME		"FM1 at DTSEC1"
-#endif
-
-/*
-* USB
-*/
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_HAS_FSL_DR_USB
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-
-#define __USB_PHY_TYPE	utmi
-
-/*
- * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be
- * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way
- * interleaving. It can be cacheline, page, bank, superbank.
- * See doc/README.fsl-ddr for details.
- */
-#ifdef CONFIG_ARCH_T4240
-#define CTRL_INTLV_PREFERED 3way_4KB
-#else
-#define CTRL_INTLV_PREFERED cacheline
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS				\
-	"hwconfig=fsl_ddr:"					\
-	"ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) ","	\
-	"bank_intlv=auto;"					\
-	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
-	"netdev=eth0\0"						\
-	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
-	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
-	"tftpflash=tftpboot $loadaddr $uboot && "		\
-	"protect off $ubootaddr +$filesize && "			\
-	"erase $ubootaddr +$filesize && "			\
-	"cp.b $loadaddr $ubootaddr $filesize && "		\
-	"protect on $ubootaddr +$filesize && "			\
-	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
-	"consoledev=ttyS0\0"					\
-	"ramdiskaddr=2000000\0"					\
-	"ramdiskfile=t4240rdb/ramdisk.uboot\0"			\
-	"fdtaddr=1e00000\0"					\
-	"fdtfile=t4240rdb/t4240rdb.dtb\0"			\
-	"bdev=sda3\0"
-
-#define CONFIG_HVBOOT					\
-	"setenv bootargs config-addr=0x60000000; "	\
-	"bootm 0x01000000 - 0x00f00000"
-
-#define CONFIG_LINUX					\
-	"setenv bootargs root=/dev/ram rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"setenv ramdiskaddr 0x02000000;"		\
-	"setenv fdtaddr 0x00c00000;"			\
-	"setenv loadaddr 0x1000000;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_HDBOOT					\
-	"setenv bootargs root=/dev/$bdev rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $loadaddr $bootfile;"			\
-	"tftp $fdtaddr $fdtfile;"			\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND			\
-	"setenv bootargs root=/dev/nfs rw "	\
-	"nfsroot=$serverip:$rootpath "		\
-	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $loadaddr $bootfile;"		\
-	"tftp $fdtaddr $fdtfile;"		\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND				\
-	"setenv bootargs root=/dev/ram rw "		\
-	"console=$consoledev,$baudrate $othbootargs;"	\
-	"tftp $ramdiskaddr $ramdiskfile;"		\
-	"tftp $loadaddr $bootfile;"			\
-	"tftp $fdtaddr $fdtfile;"			\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
-
-#include <asm/fsl_secure_boot.h>
-
-#endif	/* __CONFIG_H */
-- 
2.17.1



More information about the U-Boot mailing list