[PATCH 00/26] ppc: qemu: Convert qemu-ppce500 to driver model
Bin Meng
bmeng.cn at gmail.com
Sun Feb 7 16:11:00 CET 2021
At present when building qemu-ppce500 the following warnings are seen:
===================== WARNING ======================
This board does not use CONFIG_DM. CONFIG_DM will be
compulsory starting with the v2020.01 release.
Failure to update may result in board removal.
UPD include/generated/timestamp_autogenerated.h
See doc/driver-model/migration.rst for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_PCI Please update
the board to use CONFIG_DM_PCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
The conversion of qemu-ppce500 board to driver model is long overdue.
When testing the exisitng qemu-ppce500 support, PCI was found broken.
This is caused by 2 separate issues:
- One issue was caused by U-Boot:
Commit e002474158d1 ("pci: pci-uclass: Dynamically allocate the PCI regions")
Patch #1 reverts this commit as it broken all boards that have not converted
to driver model PCI.
- One issue was caused by QEMU:
commit e6b4e5f4795b ("PPC: e500: Move CCSR and MMIO space to upper end of address space")
commit cb3778a0455a ("PPC: e500 pci host: Add support for ATMUs")
Patch #3-4 fixed this issue to keep in sync with latest QEMU upstream
Patch #5-8 are minor fixes and clean-ups.
Starting from patch#9, these are driver model conversion patches.
Patch #11-16 are mainly related to CONFIG_ADDR_MAP, a library to support targets
that have non-identity virtual-physical address mappings. A new command 'addrmap'
is introduced to aid debugging, and a fix to arch/powerpc/asm/include/io.h is
made to correct the usage of CONFIG_ADDR_MAP as it can only be used in the post-
relocation phase. Also the initialization of this library is moved a bit earlier
in the post-relocation phase otherwise device drivers won't work.
Patch #18-20 are 85xx PCI driver fixes. It adds support to controller register
physical address beyond 32-bit, as well as support to 64-bit bus and cpu address
as current upstream QEMU uses 64-bit cpu address.
Patch #23 is minor fix to the 'virtio' command dependency.
Patch #24 enables the VirtIO NET support as by default a VirtIO standard PCI
networking device is connected as an ethernet interface at PCI address 0.1.0.
Patch #25 moves the qemu-ppce500 boards codes to board/emulation as that is the
place for other QEMU targets like x86, arm, riscv.
Patch #26 adds a reST document to describe how to build and run U-Boot for the
QEMU ppce500 machine.
I hope we can make this series to U-Boot v2021.04 release.
This series is available at u-boot-x86/qemu-ppc for testing.
This cover letter is cc'ed to QEMU mailing list for a heads-up.
A future patch will be sent to QEMU mailing list to bring its in-tree
U-Boot source codes up-to-date.
Bin Meng (26):
Revert "pci: pci-uclass: Dynamically allocate the PCI regions"
ppc: qemu: Update MAINTAINERS for correct email address
common: fdt_support: Support special case of PCI address in
fdt_read_prop()
ppc: qemu: Support non-identity PCI bus address
ppc: qemu: Fix CONFIG_SYS_PCI_MAP_END
ppc: mpc85xx: Wrap LAW related codes with CONFIG_FSL_LAW
ppc: qemu: Drop init_laws() and print_laws()
ppc: qemu: Drop board_early_init_f()
ppc: qemu: Enable OF_CONTROL
ppc: qemu: Enable driver model
include: Remove extern from addr_map.h
lib: addr_map: Move address_map[] type to the header file
cmd: Add a command to display the address map
lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help
ppc: io.h: Use addrmap_ translation APIs only in post-relocation phase
common: Move initr_addr_map() to a bit earlier
ppc: qemu: Switch over to use DM serial
pci: mpc85xx: Wrap LAW programming with CONFIG_FSL_LAW
pci: mpc85xx: Support controller register physical address beyond
32-bit
pci: mpc85xx: Support 64-bit bus and cpu address
ppc: qemu: Switch over to use DM ETH and PCI
ppc: qemu: Drop CONFIG_OF_BOARD_SETUP
cmd: Fix virtio command dependency
ppc: qemu: Enable VirtIO NET support
ppc: qemu: Move board directory from board/freescale to
board/emulation
doc: Add a reST document for qemu-ppce500
arch/powerpc/cpu/mpc85xx/Kconfig | 2 +-
arch/powerpc/cpu/mpc85xx/cpu.c | 2 +
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +
arch/powerpc/include/asm/io.h | 15 +-
.../{freescale => emulation}/qemu-ppce500/Kconfig | 2 +-
board/emulation/qemu-ppce500/MAINTAINERS | 7 +
.../{freescale => emulation}/qemu-ppce500/Makefile | 0
.../qemu-ppce500/qemu-ppce500.c | 159 ++++++---------------
board/freescale/qemu-ppce500/MAINTAINERS | 6 -
cmd/Kconfig | 8 ++
cmd/Makefile | 1 +
cmd/addrmap.c | 35 +++++
common/board_r.c | 6 +-
common/fdt_support.c | 15 +-
configs/qemu-ppce500_defconfig | 14 +-
doc/board/emulation/index.rst | 1 +
doc/board/emulation/qemu-ppce500.rst | 73 ++++++++++
drivers/pci/pci-uclass.c | 14 +-
drivers/pci/pci_mpc85xx.c | 25 ++--
include/addr_map.h | 16 ++-
include/configs/qemu-ppce500.h | 25 +---
include/pci.h | 4 +-
lib/Kconfig | 2 +
lib/addr_map.c | 6 +-
24 files changed, 250 insertions(+), 190 deletions(-)
rename board/{freescale => emulation}/qemu-ppce500/Kconfig (86%)
create mode 100644 board/emulation/qemu-ppce500/MAINTAINERS
rename board/{freescale => emulation}/qemu-ppce500/Makefile (100%)
rename board/{freescale => emulation}/qemu-ppce500/qemu-ppce500.c (68%)
delete mode 100644 board/freescale/qemu-ppce500/MAINTAINERS
create mode 100644 cmd/addrmap.c
create mode 100644 doc/board/emulation/qemu-ppce500.rst
--
2.7.4
More information about the U-Boot
mailing list