[PATCH v2 3/3] firmware: scmi: fix inline comments and minor coding style issues

Jaehoon Chung jh80.chung at samsung.com
Mon Feb 22 00:37:07 CET 2021


On 2/19/21 10:33 PM, Etienne Carriere wrote:
> Fix inline comments and empty line in scmi driver and test files.
> 
> Remove test on IS_ENABLED(CONFIG_*_SCMI) in test/dm/scmi.c since these
> configuration are expected enabled when CONFIG_FIRMWARE_SCMI is enabled
> in sandbox configuration.
> 
> Signed-off-by: Etienne Carriere <etienne.carriere at linaro.org>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
> Changes in v2:
>  - discard adding tests on IS_ENABLED(CONFIG_*_SCMI) in test/dm/scmi.c
>    for the reason stated in commit log.
> ---
>  arch/sandbox/include/asm/scmi_test.h       |  5 +++--
>  drivers/firmware/scmi/sandbox-scmi_agent.c |  4 ++--
>  test/dm/scmi.c                             | 15 ++-------------
>  3 files changed, 7 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/sandbox/include/asm/scmi_test.h b/arch/sandbox/include/asm/scmi_test.h
> index 9b7031531..2930e686d 100644
> --- a/arch/sandbox/include/asm/scmi_test.h
> +++ b/arch/sandbox/include/asm/scmi_test.h
> @@ -24,6 +24,7 @@ struct sandbox_scmi_clk {
>  
>  /**
>   * struct sandbox_scmi_reset - Simulated reset controller exposed by SCMI
> + * @id:		Identifier of the reset controller used in the SCMI protocol
>   * @asserted:	Reset control state: true if asserted, false if desasserted
>   */
>  struct sandbox_scmi_reset {
> @@ -48,8 +49,8 @@ struct sandbox_scmi_voltd {
>   * @idx:	Identifier for the SCMI agent, its index
>   * @clk:	Simulated clocks
>   * @clk_count:	Simulated clocks array size
> - * @clk:	Simulated reset domains
> - * @clk_count:	Simulated reset domains array size
> + * @reset:	Simulated reset domains
> + * @reset_count: Simulated reset domains array size
>   * @voltd:	 Simulated voltage domains (regulators)
>   * @voltd_count: Simulated voltage domains array size
>   */
> diff --git a/drivers/firmware/scmi/sandbox-scmi_agent.c b/drivers/firmware/scmi/sandbox-scmi_agent.c
> index 3eafc49bd..56125a57b 100644
> --- a/drivers/firmware/scmi/sandbox-scmi_agent.c
> +++ b/drivers/firmware/scmi/sandbox-scmi_agent.c
> @@ -18,7 +18,7 @@
>   * processing. It simulates few of the SCMI services for some of the
>   * SCMI protocols embedded in U-Boot. Currently:
>   * - SCMI clock protocol: emulate 2 agents each exposing few clocks
> - * - SCMI reset protocol: emulate 1 agents each exposing a reset
> + * - SCMI reset protocol: emulate 1 agent exposing a reset controller
>   * - SCMI voltage domain protocol: emulate 1 agent exposing 2 regulators
>   *
>   * Agent #0 simulates 2 clocks, 1 reset domain and 1 voltage domain.
> @@ -29,7 +29,7 @@
>   *
>   * All clocks and regulators are default disabled and reset controller down.
>   *
> - * This Driver exports sandbox_scmi_service_ct() for the test sequence to
> + * This Driver exports sandbox_scmi_service_ctx() for the test sequence to
>   * get the state of the simulated services (clock state, rate, ...) and
>   * check back-end device state reflects the request send through the
>   * various uclass devices, as clocks and reset controllers.
> diff --git a/test/dm/scmi.c b/test/dm/scmi.c
> index 792410338..2eaf06392 100644
> --- a/test/dm/scmi.c
> +++ b/test/dm/scmi.c
> @@ -44,10 +44,8 @@ static int ut_assert_scmi_state_postprobe(struct unit_test_state *uts,
>  	scmi_devices = sandbox_scmi_devices_ctx(dev);
>  
>  	ut_assertnonnull(scmi_devices);
> -	if (IS_ENABLED(CONFIG_CLK_SCMI))
> -		ut_asserteq(3, scmi_devices->clk_count);
> -	if (IS_ENABLED(CONFIG_RESET_SCMI))
> -		ut_asserteq(1, scmi_devices->reset_count);
> +	ut_asserteq(3, scmi_devices->clk_count);
> +	ut_asserteq(1, scmi_devices->reset_count);
>  	ut_asserteq(2, scmi_devices->regul_count);
>  
>  	/* State of the simulated SCMI server exposed */
> @@ -110,7 +108,6 @@ static int dm_test_scmi_sandbox_agent(struct unit_test_state *uts)
>  
>  	return ret;
>  }
> -
>  DM_TEST(dm_test_scmi_sandbox_agent, UT_TESTF_SCAN_FDT);
>  
>  static int dm_test_scmi_clocks(struct unit_test_state *uts)
> @@ -121,9 +118,6 @@ static int dm_test_scmi_clocks(struct unit_test_state *uts)
>  	int ret_dev;
>  	int ret;
>  
> -	if (!IS_ENABLED(CONFIG_CLK_SCMI))
> -		return 0;
> -
>  	ret = load_sandbox_scmi_test_devices(uts, &dev);
>  	if (ret)
>  		return ret;
> @@ -172,7 +166,6 @@ static int dm_test_scmi_clocks(struct unit_test_state *uts)
>  
>  	return release_sandbox_scmi_test_devices(uts, dev);
>  }
> -
>  DM_TEST(dm_test_scmi_clocks, UT_TESTF_SCAN_FDT);
>  
>  static int dm_test_scmi_resets(struct unit_test_state *uts)
> @@ -182,9 +175,6 @@ static int dm_test_scmi_resets(struct unit_test_state *uts)
>  	struct udevice *dev = NULL;
>  	int ret;
>  
> -	if (!IS_ENABLED(CONFIG_RESET_SCMI))
> -		return 0;
> -
>  	ret = load_sandbox_scmi_test_devices(uts, &dev);
>  	if (ret)
>  		return ret;
> @@ -203,7 +193,6 @@ static int dm_test_scmi_resets(struct unit_test_state *uts)
>  
>  	return release_sandbox_scmi_test_devices(uts, dev);
>  }
> -
>  DM_TEST(dm_test_scmi_resets, UT_TESTF_SCAN_FDT);
>  
>  static int dm_test_scmi_voltage_domains(struct unit_test_state *uts)
> 



More information about the U-Boot mailing list