[PATCH 24/25] arm: Remove db-88f6281-bp board
Tom Rini
trini at konsulko.com
Tue Feb 9 14:03:16 CET 2021
This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago. In addition there are other DM
migrations it is also missing. Remove it.
Cc: Chris Packham <judge.packham at gmail.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/dts/Makefile | 2 -
arch/arm/dts/kirkwood-db-88f6281-spi.dts | 48 ---------
arch/arm/dts/kirkwood-db-88f6281.dts | 26 -----
arch/arm/dts/kirkwood-db.dtsi | 94 -----------------
arch/arm/mach-kirkwood/Kconfig | 4 -
board/Marvell/db-88f6281-bp/.gitignore | 1 -
board/Marvell/db-88f6281-bp/Kconfig | 12 ---
board/Marvell/db-88f6281-bp/MAINTAINERS | 10 --
board/Marvell/db-88f6281-bp/Makefile | 12 ---
board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 106 --------------------
board/Marvell/db-88f6281-bp/kwbimage.cfg.in | 36 -------
configs/db-88f6281-bp-nand_defconfig | 64 ------------
configs/db-88f6281-bp-spi_defconfig | 63 ------------
include/configs/db-88f6281-bp.h | 83 ---------------
14 files changed, 561 deletions(-)
delete mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts
delete mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts
delete mode 100644 arch/arm/dts/kirkwood-db.dtsi
delete mode 100644 board/Marvell/db-88f6281-bp/.gitignore
delete mode 100644 board/Marvell/db-88f6281-bp/Kconfig
delete mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS
delete mode 100644 board/Marvell/db-88f6281-bp/Makefile
delete mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c
delete mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg.in
delete mode 100644 configs/db-88f6281-bp-nand_defconfig
delete mode 100644 configs/db-88f6281-bp-spi_defconfig
delete mode 100644 include/configs/db-88f6281-bp.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index f0944b7590cf..cbaa9f29c1b5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -39,8 +39,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
kirkwood-atl-sbx81lifxcat.dtb \
kirkwood-blackarmor-nas220.dtb \
kirkwood-d2net.dtb \
- kirkwood-db-88f6281.dtb \
- kirkwood-db-88f6281-spi.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
kirkwood-dreamplug.dtb \
diff --git a/arch/arm/dts/kirkwood-db-88f6281-spi.dts b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
deleted file mode 100644
index 50b1b0d4a535..000000000000
--- a/arch/arm/dts/kirkwood-db-88f6281-spi.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed at marvell.com>
- * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db-88f6281.dts"
-
-/ {
- aliases {
- spi0 = &spi0;
- };
-};
-
-&spi0 {
- status = "okay";
-
- flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
- reg = <0>;
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition at u-boot {
- reg = <0x00000000 0x00c00000>;
- label = "u-boot";
- };
- partition at u-boot-env {
- reg = <0x00c00000 0x00040000>;
- label = "u-boot-env";
- };
- partition at unused {
- reg = <0x00100000 0x00f00000>;
- label = "unused";
- };
- };
-};
-
-&nand {
- status = "disabled";
-};
diff --git a/arch/arm/dts/kirkwood-db-88f6281.dts b/arch/arm/dts/kirkwood-db-88f6281.dts
deleted file mode 100644
index 2adb17c955aa..000000000000
--- a/arch/arm/dts/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed at marvell.com>
- * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
- model = "Marvell DB-88F6281-BP Development Board";
- compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-};
-
-&pciec {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/kirkwood-db.dtsi b/arch/arm/dts/kirkwood-db.dtsi
deleted file mode 100644
index b81d8e8298a3..000000000000
--- a/arch/arm/dts/kirkwood-db.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
- *
- * Saeed Bishara <saeed at marvell.com>
- * Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-
-/ {
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- };
-
- aliases {
- ethernet0 = ð0;
- spi0 = &spi0;
- };
-
- ocp at f1000000 {
- pin-controller at 10000 {
- pmx_sdio_gpios: pmx-sdio-gpios {
- marvell,pins = "mpp37", "mpp38";
- marvell,function = "gpio";
- };
- };
-
- serial at 12000 {
- status = "okay";
- };
-
- sata at 80000 {
- nr-ports = <2>;
- status = "okay";
- };
-
- ehci at 50000 {
- status = "okay";
- };
-
- mvsdio at 90000 {
- pinctrl-0 = <&pmx_sdio_gpios>;
- pinctrl-names = "default";
- wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
- };
-};
-
-&nand {
- chip-delay = <25>;
- status = "okay";
-
- partition at 0 {
- label = "uboot";
- reg = <0x0 0x100000>;
- };
-
- partition at 100000 {
- label = "uImage";
- reg = <0x100000 0x400000>;
- };
-
- partition at 500000 {
- label = "root";
- reg = <0x500000 0x1fb00000>;
- };
-};
-
-&mdio {
- status = "okay";
-
- ethphy0: ethernet-phy at 8 {
- reg = <8>;
- };
-};
-
-ð0 {
- status = "okay";
- ethernet0-port at 0 {
- phy-handle = <ðphy0>;
- };
-};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 1d2ba886dd1a..546a3fc00fdc 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -56,9 +56,6 @@ config TARGET_SBx81LIFKW
config TARGET_SBx81LIFXCAT
bool "Allied Telesis SBx81GP24/SBx81GT24"
-config TARGET_DB_88F6281_BP
- bool "Marvell DB-88F6281-BP"
-
endchoice
config SYS_SOC
@@ -81,6 +78,5 @@ source "board/Seagate/nas220/Kconfig"
source "board/zyxel/nsa310s/Kconfig"
source "board/alliedtelesis/SBx81LIFKW/Kconfig"
source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
-source "board/Marvell/db-88f6281-bp/Kconfig"
endif
diff --git a/board/Marvell/db-88f6281-bp/.gitignore b/board/Marvell/db-88f6281-bp/.gitignore
deleted file mode 100644
index 775b9346b859..000000000000
--- a/board/Marvell/db-88f6281-bp/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-kwbimage.cfg
diff --git a/board/Marvell/db-88f6281-bp/Kconfig b/board/Marvell/db-88f6281-bp/Kconfig
deleted file mode 100644
index 38467399e688..000000000000
--- a/board/Marvell/db-88f6281-bp/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DB_88F6281_BP
-
-config SYS_BOARD
- default "db-88f6281-bp"
-
-config SYS_VENDOR
- default "Marvell"
-
-config SYS_CONFIG_NAME
- default "db-88f6281-bp"
-
-endif
diff --git a/board/Marvell/db-88f6281-bp/MAINTAINERS b/board/Marvell/db-88f6281-bp/MAINTAINERS
deleted file mode 100644
index acf0b051ff54..000000000000
--- a/board/Marvell/db-88f6281-bp/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-DB_88F6820_AMC BOARD
-M: Chris Packham <judge.packham at gmail.com>
-S: Maintained
-F: arch/arm/dts/kirkwood-db-88f6281.dts
-F: arch/arm/dts/kirkwood-db-88f6281-spi.dts
-F: arch/arm/dts/kirkwood-db.dtsi
-F: board/Marvell/db-88f6281-bp/
-F: include/configs/db-88f6281-bp.h
-F: configs/db-88f6281-bp-nand_defconfig
-F: configs/db-88f6281-bp-spi_defconfig
diff --git a/board/Marvell/db-88f6281-bp/Makefile b/board/Marvell/db-88f6281-bp/Makefile
deleted file mode 100644
index 003e9f66d18f..000000000000
--- a/board/Marvell/db-88f6281-bp/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y := db-88f6281-bp.o
-extra-y := kwbimage.cfg
-
-quiet_cmd_sed = SED $@
- cmd_sed = sed $(SEDFLAGS_$(@F)) $< >$(dir $@)$(@F)
-
-SEDFLAGS_kwbimage.cfg = -e "s/^\#@BOOT_FROM.*/BOOT_FROM $(if $(CONFIG_CMD_NAND),nand,spi)/"
-$(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \
- include/config/auto.conf
- $(call if_changed,sed)
diff --git a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c b/board/Marvell/db-88f6281-bp/db-88f6281-bp.c
deleted file mode 100644
index 62027bd6385e..000000000000
--- a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/mpp.h>
-#include <asm/arch/gpio.h>
-
-#define DB_88F6281_OE_LOW ~(BIT(7))
-#define DB_88F6281_OE_HIGH ~(BIT(15) | BIT(14) | BIT(13) | BIT(4))
-#define DB_88F6281_OE_VAL_LOW BIT(7)
-#define DB_88F6281_OE_VAL_HIGH 0
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- mvebu_config_gpio(DB_88F6281_OE_VAL_LOW,
- DB_88F6281_OE_VAL_HIGH,
- DB_88F6281_OE_LOW, DB_88F6281_OE_HIGH);
-
- /* Multi-Purpose Pins Functionality configuration */
- static const u32 kwmpp_config[] = {
-#ifdef CONFIG_CMD_NAND
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
-#else
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
-#endif
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_GPO,
- MPP8_TW_SDA,
- MPP9_TW_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_SD_CLK,
- MPP13_SD_CMD,
- MPP14_SD_D0,
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_GPIO,
- MPP23_GPIO,
- MPP24_GPIO,
- MPP25_GPIO,
- MPP26_GPIO,
- MPP27_GPIO,
- MPP28_GPIO,
- MPP29_GPIO,
- MPP30_GPIO,
- MPP31_GPIO,
- MPP32_GPIO,
- MPP33_GPIO,
- MPP34_GPIO,
- MPP35_GPIO,
- MPP36_GPIO,
- MPP37_GPIO,
- MPP38_GPIO,
- MPP39_GPIO,
- MPP40_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- MPP49_GPIO,
- 0
- };
- kirkwood_mpp_conf(kwmpp_config, NULL);
-
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* automatically defined by kirkwood config.h */
-void reset_phy(void)
-{
-}
-#endif
diff --git a/board/Marvell/db-88f6281-bp/kwbimage.cfg.in b/board/Marvell/db-88f6281-bp/kwbimage.cfg.in
deleted file mode 100644
index 05f8b275f607..000000000000
--- a/board/Marvell/db-88f6281-bp/kwbimage.cfg.in
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-# Boot Media configurations
-#@BOOT_FROM
-
-DATA 0xd00100e0 0x1b1b1b9b
-DATA 0xd0020134 0xbbbbbbbb
-DATA 0xd0020138 0x00bbbbbb
-DATA 0xd0020154 0x00000200
-DATA 0xd002014c 0x00001c00
-DATA 0xd0020148 0x00000001
-
-DATA 0xd0001400 0x43000c30
-DATA 0xd0001404 0x39543000
-DATA 0xd0001408 0x22125451
-DATA 0xd000140c 0x00000833
-DATA 0xd0001410 0x000000cc
-DATA 0xd0001414 0x00000000
-DATA 0xd0001418 0x00000000
-DATA 0xd000141c 0x00000c52
-DATA 0xd0001420 0x00000044
-DATA 0xd0001424 0x0000f1ff
-DATA 0xd0001428 0x00085520
-DATA 0xd000147c 0x00008552
-DATA 0xd0001504 0x0ffffff1
-DATA 0xd0001508 0x10000000
-DATA 0xd000150c 0x0ffffff5
-DATA 0xd0001514 0x00000000
-DATA 0xd000151c 0x00000000
-DATA 0xd0001494 0x84210000
-DATA 0xd0001498 0x00000000
-DATA 0xd000149c 0x0000f40f
-DATA 0xd0001480 0x00000001
-
-# End of Header extension
-DATA 0x0 0x0
diff --git a/configs/db-88f6281-bp-nand_defconfig b/configs/db-88f6281-bp-nand_defconfig
deleted file mode 100644
index 4fff3269aff1..000000000000
--- a/configs/db-88f6281-bp-nand_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_TARGET_DB_88F6281_BP=y
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP"
-CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281"
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
-CONFIG_ISO_PARTITION=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_DM_ETH=y
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_MV=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_KIRKWOOD_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_LZMA=y
-CONFIG_LZO=y
diff --git a/configs/db-88f6281-bp-spi_defconfig b/configs/db-88f6281-bp-spi_defconfig
deleted file mode 100644
index 07e9db7f41b2..000000000000
--- a/configs/db-88f6281-bp-spi_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_TARGET_DB_88F6281_BP=y
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP"
-CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281-spi"
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
-CONFIG_ISO_PARTITION=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_DM_ETH=y
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_MV=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_KIRKWOOD_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_LZMA=y
-CONFIG_LZO=y
diff --git a/include/configs/db-88f6281-bp.h b/include/configs/db-88f6281-bp.h
deleted file mode 100644
index 06a7091be208..000000000000
--- a/include/configs/db-88f6281-bp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-
-#ifndef _CONFIG_DB_88F6281_BP_H
-#define _CONFIG_DB_88F6281_BP_H
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
-#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-#define CONFIG_SYS_TCLK 166666667
-#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
-
-/* additions for new ARM relocation support */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_GPIO 1
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-/*
- * Environment variables configurations
- */
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
-#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
-
-/*
- * U-Boot bootcode configuration
- */
-
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
-
-/* size in bytes reserved for initial data */
-
-#include <asm/arch/config.h>
-/* There is no PHY directly connected so don't ask it for link status */
-#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
-
-/*
- * SDIO/MMC Card Configuration
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MVEBU_MMC
-#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
-#endif /* CONFIG_CMD_MMC */
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
-
-#endif /* _CONFIG_DB_88F6281_BP_H */
--
2.17.1
More information about the U-Boot
mailing list