[PATCH 09/16] ppc: Remove MPC8349ITX board
Tom Rini
trini at konsulko.com
Wed Feb 10 03:42:50 CET 2021
This board relies on using CONFIG_LIBATA but does not enable CONFIG_AHCI. The
deadline for this conversion was the v2019.07 release. The use of CONFIG_AHCI
requires CONFIG_DM. The deadline for this conversion was v2020.01. Remove
this board.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/powerpc/cpu/mpc83xx/Kconfig | 6 -
board/freescale/mpc8349itx/Kconfig | 12 -
board/freescale/mpc8349itx/MAINTAINERS | 8 -
board/freescale/mpc8349itx/Makefile | 6 -
board/freescale/mpc8349itx/README | 186 ----------
board/freescale/mpc8349itx/mpc8349itx.c | 401 ---------------------
board/freescale/mpc8349itx/pci.c | 104 ------
configs/MPC8349ITXGP_defconfig | 188 ----------
configs/MPC8349ITX_LOWBOOT_defconfig | 196 -----------
configs/MPC8349ITX_defconfig | 195 -----------
include/configs/MPC8349ITX.h | 441 ------------------------
11 files changed, 1743 deletions(-)
delete mode 100644 board/freescale/mpc8349itx/Kconfig
delete mode 100644 board/freescale/mpc8349itx/MAINTAINERS
delete mode 100644 board/freescale/mpc8349itx/Makefile
delete mode 100644 board/freescale/mpc8349itx/README
delete mode 100644 board/freescale/mpc8349itx/mpc8349itx.c
delete mode 100644 board/freescale/mpc8349itx/pci.c
delete mode 100644 configs/MPC8349ITXGP_defconfig
delete mode 100644 configs/MPC8349ITX_LOWBOOT_defconfig
delete mode 100644 configs/MPC8349ITX_defconfig
delete mode 100644 include/configs/MPC8349ITX.h
diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 2bae08e27863..f34acf7fa7f5 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -75,11 +75,6 @@ config TARGET_MPC8349EMDS_SDRAM
select SYS_FSL_DDR_BE
select SYS_FSL_HAS_DDR2
-config TARGET_MPC8349ITX
- bool "Support MPC8349ITX"
- select ARCH_MPC8349
- imply CMD_IRQ
-
config TARGET_MPC837XEMDS
bool "Support MPC837XEMDS"
select ARCH_MPC837X
@@ -336,7 +331,6 @@ source "board/freescale/mpc8315erdb/Kconfig"
source "board/freescale/mpc8323erdb/Kconfig"
source "board/freescale/mpc832xemds/Kconfig"
source "board/freescale/mpc8349emds/Kconfig"
-source "board/freescale/mpc8349itx/Kconfig"
source "board/freescale/mpc837xemds/Kconfig"
source "board/freescale/mpc837xerdb/Kconfig"
source "board/ids/ids8313/Kconfig"
diff --git a/board/freescale/mpc8349itx/Kconfig b/board/freescale/mpc8349itx/Kconfig
deleted file mode 100644
index ce3fffda7d82..000000000000
--- a/board/freescale/mpc8349itx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8349ITX
-
-config SYS_BOARD
- default "mpc8349itx"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "MPC8349ITX"
-
-endif
diff --git a/board/freescale/mpc8349itx/MAINTAINERS b/board/freescale/mpc8349itx/MAINTAINERS
deleted file mode 100644
index d0388ad6e55c..000000000000
--- a/board/freescale/mpc8349itx/MAINTAINERS
+++ /dev/null
@@ -1,8 +0,0 @@
-MPC8349ITX BOARD
-#M: -
-S: Maintained
-F: board/freescale/mpc8349itx/
-F: include/configs/MPC8349ITX.h
-F: configs/MPC8349ITX_defconfig
-F: configs/MPC8349ITX_LOWBOOT_defconfig
-F: configs/MPC8349ITXGP_defconfig
diff --git a/board/freescale/mpc8349itx/Makefile b/board/freescale/mpc8349itx/Makefile
deleted file mode 100644
index 803cba09ffb9..000000000000
--- a/board/freescale/mpc8349itx/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) Freescale Semiconductor, Inc. 2006.
-
-obj-y += mpc8349itx.o
-obj-$(CONFIG_PCI) += pci.o
diff --git a/board/freescale/mpc8349itx/README b/board/freescale/mpc8349itx/README
deleted file mode 100644
index 3012b837377d..000000000000
--- a/board/freescale/mpc8349itx/README
+++ /dev/null
@@ -1,186 +0,0 @@
-Freescale MPC8349E-mITX and MPC8349E-mITX-GP Boards
----------------------------------------------------
-
-1. Board Description
-
- The MPC8349E-mITX and MPC8349E-mITX-GP are reference boards featuring
- the Freescale MPC8349E processor in a Mini-ITX form factor.
-
- The MPC8349E-mITX-GP is an MPC8349E-mITX with the following differences:
-
- A) One 8MB on-board flash EEPROM chip, instead of two.
- B) No SATA controller
- C) No Compact Flash slot
- D) No Mini-PCI slot
- E) No Vitesse 7385 5-port Ethernet switch
- F) No 4-port USB Type-A interface
-
-2. Board Switches and Jumpers
-
-2.0 Descriptions for all of the board jumpers can be found in the User
- Guide. Of particular interest to U-Boot developers is jumper J22:
-
- Pos. Name Default Description
- -----------------------------------------------------------------------
- A LGPL0 ON (0) HRCW source, bit 0
- B LGPL1 ON (0) HRCW source, bit 1
- C LGPL3 ON (0) HRCW source, bit 2
- D LGPL5 OFF (1) PCI_SYNC_OUT frequency
- E BOOT1 ON (0) Flash EEPROM boot device
- F PCI_M66EN ON (0) PCI 66MHz enable
- G I2C-WP ON (0) I2C EEPROM write protection
- H F_WP OFF (1) Flash EEPROM write protection
-
- Jumper J22.E is only for the ITX, and it decides the configuration
- of the flash chips. If J22.E is ON (i.e. jumpered), then flash chip
- U4 is located at address FE000000 and flash chip U7 is at FE800000.
- If J22.E is OFF, then U7 is at FE000000 and U4 is at FE800000.
-
- For U-Boot development, J22.E can be used to switch back-and-forth
- between two U-Boot images.
-
-3. Memory Map
-
-3.1. The memory map should look pretty much like this:
-
- 0x0000_0000 - 0x0FFF_FFFF DDR SDRAM (256 MB)
- 0x8000_0000 - 0x9FFF_FFFF PCI1 memory space (512 MB)
- 0xA000_0000 - 0xBFFF_FFFF PCI2 memory space (512 MB)
- 0xE000_0000 - 0xEFFF_FFFF IMMR (1 MB)
- 0xE200_0000 - 0xE2FF_FFFF PCI1 I/O space (16 MB)
- 0xE300_0000 - 0xE3FF_FFFF PCI2 I/O space (16 MB)
- 0xF000_0000 - 0xF000_FFFF Compact Flash (ITX only)
- 0xF001_0000 - 0xF001_FFFF Local bus expansion slot
- 0xF800_0000 - 0xF801_FFFF Vitesse 7385 Parallel Interface (ITX only)
- 0xFE00_0000 - 0xFE7F_FFFF First 8MB bank of Flash memory
- 0xFE80_0000 - 0xFEFF_FFFF Second 8MB bank of Flash memory (ITX only)
-
-3.2 Flash EEPROM layout.
-
- On the ITX, jumper J22.E is used to determine which flash chips are
- at which address. When J22.E is switched, addresses from FE000000
- to FE7FFFFF are swapped with addresses from FE800000 to FEFFFFFF.
-
- On the ITX, at the normal boot address (aka HIGHBOOT):
-
- FE00_0000 HRCW
- FE70_0000 Alternative U-Boot image
- FE80_0000 Alternative HRCW
- FEF0_0000 U-Boot image
- FEFF_FFFF End of flash
-
- On the ITX, at the low boot address (LOWBOOT)
-
- FE00_0000 HRCW and U-Boot image
- FE04_0000 U-Boot environment variables
- FE80_0000 Alternative HRCW and U-Boot image
- FEFF_FFFF End of flash
-
- On the ITX-GP, the only option is LOWBOOT and there is only one chip
-
- FE00_0000 HRCW and U-Boot image
- FE04_0000 U-Boot environment variables
- F7FF_FFFF End of flash
-
-4. Definitions
-
-4.1 Explanation of NEW definitions in:
-
- include/configs/MPC8349ITX.h
-
- CONFIG_MPC83xx MPC83xx family
- CONFIG_MPC8349 MPC8349 specific
- CONFIG_MPC8349ITX MPC8349E-mITX
-
-5. Compilation
-
- Assuming you're using BASH shell:
-
- export CROSS_COMPILE=your-cross-compile-prefix
- cd u-boot
- make distclean
-
- make MPC8349ITX_config
- or:
- make MPC8349ITXGP_config
- or:
- make MPC8349ITX_LOWBOOT_config
-
- make
-
-6. Downloading and Flashing Images
-
-6.1 Download via tftp:
-
- tftp $loadaddr <uboot>
-
- where "<uboot>" is the path and filename, on the TFTP server, of
- the U-Boot image.
-
-6.1 Reflash U-Boot Image using U-Boot
-
- setenv uboot <uboot>
- run tftpflash
-
- where "<uboot>" is the path and filename, on the TFTP server, of
- the U-Boot image.
-
-6.2 Using the HRCW to switch between two different U-Boot images on the ITX
-
- Because the ITX has 16MB of flash, it is possible to keep two U-Boot
- images in flash, and use the HRCW to specify which one is to be used
- when the board boots. This trick is especially effective with a
- hardware debugger that can override the HRCW, such as the BDI-2000.
-
- When the BMS bit in the HRCW is 0, the ITX will boot the U-Boot image
- at address FE000000. When the BMS bit is 1, the ITX will boot the
- image at address FEF00000.
-
- Therefore, just put a U-Boot image at both FE000000 and FEF00000 and
- change the BMS bit whenever you want to boot the other image.
-
- Step-by-step instructions:
-
- 1) Build an ITX image to be loaded at FEF00000
-
- make distclean
- make MPC8349ITX_config
- make
-
- 2) Take the u-boot.bin image and flash it at FEF00000.
-
- tftp $loadaddr u-boot.bin
- protect off all
- erase FEF00000 +$filesize
- cp.b $loadaddr FEF00000 $filesize
-
- 3) Build an ITX image to be loaded at FE000000
-
- make distclean
- make MPC8349ITX_LOWBOOT_config
- make
-
- 4) Take the u-boot.bin image and flash it at FE000000.
-
- tftp $loadaddr u-boot.bin
- protect off FE000000 +$filesize
- erase FE000000 +$filesize
- cp.b $loadaddr FE000000 $filesize
-
- The HRCW in flash is currently set to boot the image at FE000000.
-
- If you have a hardware debugger, configure it to set the HRCW to
- B460A000 04040000 if you want to boot the image at FEF00000, or set
- it to B060A000 04040000 if you want to boot the image at FE000000.
-
- To change the HRCW in flash to boot the image at FEF00000, use these
- U-Boot commands:
-
- cp.b FE000000 1000 10000 ; copy 1st flash sector to 1000
- mw.b 1020 b4 8 ; modify BMS bit
- protect off FE000000 +10000
- erase FE000000 +10000
- cp.b 1000 FE000000 10000
-
-7. Notes
- 1) The console baudrate for MPC8349EITX is 115200bps.
diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c
deleted file mode 100644
index a265a8380fef..000000000000
--- a/board/freescale/mpc8349itx/mpc8349itx.c
+++ /dev/null
@@ -1,401 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <init.h>
-#include <ioports.h>
-#include <log.h>
-#include <mpc83xx.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <vsc7385.h>
-#ifdef CONFIG_PCI
-#include <asm/mpc8349_pci.h>
-#include <pci.h>
-#endif
-#include <spd_sdram.h>
-#include <asm/bitops.h>
-#include <asm/mmu.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <linux/libfdt.h>
-#endif
-#include <linux/delay.h>
-
-#include "../../../arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h"
-#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPD_EEPROM
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-int fixed_sdram(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- /* The size of RAM, in bytes */
- u32 ddr_size = CONFIG_SYS_DDR_SIZE << 20;
- u32 ddr_size_log2 = __ilog2(ddr_size);
-
- im->sysconf.ddrlaw[0].ar =
- LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
-
-#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0)
-#warning Chip select bounds is only configurable in 16MB increments
-#endif
- im->ddr.csbnds[0].csbnds =
- ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
- (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >>
- CSBNDS_EA_SHIFT) & CSBNDS_EA);
- im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
-
- /* Only one CS for DDR */
- im->ddr.cs_config[1] = 0;
- im->ddr.cs_config[2] = 0;
- im->ddr.cs_config[3] = 0;
-
- debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
- debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
-
- debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
- debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
-
- im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
- im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1;
- im->ddr.sdram_mode =
- (0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
- im->ddr.sdram_interval =
- (0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
- SDRAM_INTERVAL_BSTOPRE_SHIFT);
- im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-
- udelay(200);
-
- im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
-
- debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
- debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
- debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
- debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
- debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
-
- return CONFIG_SYS_DDR_SIZE;
-}
-#endif
-
-#ifdef CONFIG_PCI
-/*
- * Initialize PCI Devices, report devices found
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
- {
- PCI_ANY_ID,
- PCI_ANY_ID,
- PCI_ANY_ID,
- PCI_ANY_ID,
- 0x0f,
- PCI_ANY_ID,
- pci_cfgfunc_config_device,
- {
- PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
- },
- {}
-}
-#endif
-
-volatile static struct pci_controller hose[] = {
- {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc83xxmitx_config_table,
-#endif
- },
- {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc83xxmitx_config_table,
-#endif
- }
-};
-#endif /* CONFIG_PCI */
-
-int dram_init(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 msize = 0;
-#ifdef CONFIG_DDR_ECC
- volatile ddr83xx_t *ddr = &im->ddr;
-#endif
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
- return -ENXIO;
-
- /* DDR SDRAM - Main SODIMM */
- im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR;
-#ifdef CONFIG_SPD_EEPROM
- msize = spd_sdram();
-#else
- msize = fixed_sdram();
-#endif
-
-#ifdef CONFIG_DDR_ECC
- if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
- /* Unlike every other board, on the 83xx spd_sdram() returns
- megabytes instead of just bytes. That's why we need to
- multiple by 1MB when calling ddr_enable_ecc(). */
- ddr_enable_ecc(msize * 1048576);
-#endif
-
- /* return total bus RAM size(bytes) */
- gd->ram_size = msize * 1024 * 1024;
-
- return 0;
-}
-
-int checkboard(void)
-{
-#ifdef CONFIG_TARGET_MPC8349ITX
- puts("Board: Freescale MPC8349E-mITX\n");
-#else
- puts("Board: Freescale MPC8349E-mITX-GP\n");
-#endif
-
- return 0;
-}
-
-/*
- * Implement a work-around for a hardware problem with compact
- * flash.
- *
- * Program the UPM if compact flash is enabled.
- */
-int misc_init_f(void)
-{
-#ifdef CONFIG_VSC7385_ENET
- volatile u32 *vsc7385_cpuctrl;
-
- /* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up
- default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That
- means it is 0 when the IRQ is not active. This makes the wire-AND
- logic always assert IRQ7 to CPU even if there is no request from the
- switch. Since the compact flash and the switch share the same IRQ,
- the Linux kernel will think that the compact flash is requesting irq
- and get stuck when it tries to clear the IRQ. Thus we need to set
- the L2_IRQ0 and L2_IRQ1 to active low.
-
- The following code sets the L1_IRQ and L2_IRQ polarity to active low.
- Without this code, compact flash will not work in Linux because
- unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
- don't enable compact flash for U-Boot.
- */
-
- vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0);
- *vsc7385_cpuctrl |= 0x0c;
-#endif
-
-#ifdef CONFIG_COMPACT_FLASH
- /* UPM Table Configuration Code */
- static uint UPMATable[] = {
- 0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
- 0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
- 0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
- 0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
- };
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
- set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
-
- /* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
- GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
- */
- immap->im_lbc.mamr = 0x08404440;
-
- upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
-
- puts("UPMA: Configured for compact flash\n");
-#endif
-
- return 0;
-}
-
-/*
- * Miscellaneous late-boot configurations
- *
- * Make sure the EEPROM has the HRCW correctly programmed.
- * Make sure the RTC is correctly programmed.
- *
- * The MPC8349E-mITX can be configured to load the HRCW from
- * EEPROM instead of flash. This is controlled via jumpers
- * LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all
- * jumpered), but if they're set to 001 or 010, then the HRCW is
- * read from the "I2C EEPROM".
- *
- * This function makes sure that the I2C EEPROM is programmed
- * correctly.
- *
- * If a VSC7385 microcode image is present, then upload it.
- */
-int misc_init_r(void)
-{
- int rc = 0;
-
-#if defined(CONFIG_SYS_I2C)
- unsigned int orig_bus = i2c_get_bus_num();
- u8 i2c_data;
-
-#ifdef CONFIG_SYS_I2C_RTC_ADDR
- u8 ds1339_data[17];
-#endif
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
- static u8 eeprom_data[] = /* HRCW data */
- {
- 0xAA, 0x55, 0xAA, /* Preamble */
- 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
- 0x02, 0x40, /* RCWL ADDR=0x0_0900 */
- (CONFIG_SYS_HRCW_LOW >> 24) & 0xFF,
- (CONFIG_SYS_HRCW_LOW >> 16) & 0xFF,
- (CONFIG_SYS_HRCW_LOW >> 8) & 0xFF,
- CONFIG_SYS_HRCW_LOW & 0xFF,
- 0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
- 0x02, 0x41, /* RCWH ADDR=0x0_0904 */
- (CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF,
- (CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF,
- (CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF,
- CONFIG_SYS_HRCW_HIGH & 0xFF
- };
-
- u8 data[sizeof(eeprom_data)];
-#endif
-
- printf("Board revision: ");
- i2c_set_bus_num(1);
- if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
- printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
- else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
- printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
- else {
- printf("Unknown\n");
- rc = 1;
- }
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
- i2c_set_bus_num(0);
-
- if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
- if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
- if (i2c_write
- (CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
- sizeof(eeprom_data)) != 0) {
- puts("Failure writing the HRCW to EEPROM via I2C.\n");
- rc = 1;
- }
- }
- } else {
- puts("Failure reading the HRCW from EEPROM via I2C.\n");
- rc = 1;
- }
-#endif
-
-#ifdef CONFIG_SYS_I2C_RTC_ADDR
- i2c_set_bus_num(1);
-
- if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
- == 0) {
-
- /* Work-around for MPC8349E-mITX bug #13601.
- If the RTC does not contain valid register values, the DS1339
- Linux driver will not work.
- */
-
- /* Make sure status register bits 6-2 are zero */
- ds1339_data[0x0f] &= ~0x7c;
-
- /* Check for a valid day register value */
- ds1339_data[0x03] &= ~0xf8;
- if (ds1339_data[0x03] == 0) {
- ds1339_data[0x03] = 1;
- }
-
- /* Check for a valid date register value */
- ds1339_data[0x04] &= ~0xc0;
- if ((ds1339_data[0x04] == 0) ||
- ((ds1339_data[0x04] & 0x0f) > 9) ||
- (ds1339_data[0x04] >= 0x32)) {
- ds1339_data[0x04] = 1;
- }
-
- /* Check for a valid month register value */
- ds1339_data[0x05] &= ~0x60;
-
- if ((ds1339_data[0x05] == 0) ||
- ((ds1339_data[0x05] & 0x0f) > 9) ||
- ((ds1339_data[0x05] >= 0x13)
- && (ds1339_data[0x05] <= 0x19))) {
- ds1339_data[0x05] = 1;
- }
-
- /* Enable Oscillator and rate select */
- ds1339_data[0x0e] = 0x1c;
-
- /* Work-around for MPC8349E-mITX bug #13330.
- Ensure that the RTC control register contains the value 0x1c.
- This affects SATA performance.
- */
-
- if (i2c_write
- (CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data,
- sizeof(ds1339_data))) {
- puts("Failure writing to the RTC via I2C.\n");
- rc = 1;
- }
- } else {
- puts("Failure reading from the RTC via I2C.\n");
- rc = 1;
- }
-#endif
-
- i2c_set_bus_num(orig_bus);
-#endif
-
-#ifdef CONFIG_VSC7385_IMAGE
- if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
- CONFIG_VSC7385_IMAGE_SIZE)) {
- puts("Failure uploading VSC7385 microcode.\n");
- rc = 1;
- }
-#endif
-
- return rc;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
- ft_pci_setup(blob, bd);
-#endif
-
- return 0;
-}
-#endif
diff --git a/board/freescale/mpc8349itx/pci.c b/board/freescale/mpc8349itx/pci.c
deleted file mode 100644
index a09b6586882f..000000000000
--- a/board/freescale/mpc8349itx/pci.c
+++ /dev/null
@@ -1,104 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <init.h>
-#include <linux/delay.h>
-
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <mpc83xx.h>
-#include <pci.h>
-#include <i2c.h>
-#include <asm/fsl_i2c.h>
-
-static struct pci_region pci1_regions[] = {
- {
- bus_start: CONFIG_SYS_PCI1_MEM_BASE,
- phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
- size: CONFIG_SYS_PCI1_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- bus_start: CONFIG_SYS_PCI1_IO_BASE,
- phys_start: CONFIG_SYS_PCI1_IO_PHYS,
- size: CONFIG_SYS_PCI1_IO_SIZE,
- flags: PCI_REGION_IO
- },
- {
- bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
- size: CONFIG_SYS_PCI1_MMIO_SIZE,
- flags: PCI_REGION_MEM
- },
-};
-
-#ifdef CONFIG_MPC83XX_PCI2
-static struct pci_region pci2_regions[] = {
- {
- bus_start: CONFIG_SYS_PCI2_MEM_BASE,
- phys_start: CONFIG_SYS_PCI2_MEM_PHYS,
- size: CONFIG_SYS_PCI2_MEM_SIZE,
- flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
- },
- {
- bus_start: CONFIG_SYS_PCI2_IO_BASE,
- phys_start: CONFIG_SYS_PCI2_IO_PHYS,
- size: CONFIG_SYS_PCI2_IO_SIZE,
- flags: PCI_REGION_IO
- },
- {
- bus_start: CONFIG_SYS_PCI2_MMIO_BASE,
- phys_start: CONFIG_SYS_PCI2_MMIO_PHYS,
- size: CONFIG_SYS_PCI2_MMIO_SIZE,
- flags: PCI_REGION_MEM
- },
-};
-#endif
-
-void pci_init_board(void)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
- volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
-#ifndef CONFIG_MPC83XX_PCI2
- struct pci_region *reg[] = { pci1_regions };
-#else
- struct pci_region *reg[] = { pci1_regions, pci2_regions };
-#endif
- u8 reg8;
-
-#if defined(CONFIG_SYS_I2C)
- i2c_set_bus_num(1);
- /* Read the PCI_M66EN jumper setting */
- if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0) ||
- (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, ®8, sizeof(reg8)) == 0)) {
- if (reg8 & I2C_8574_PCI66)
- clk->occr = 0xff000000; /* 66 MHz PCI */
- else
- clk->occr = 0xff600001; /* 33 MHz PCI */
- } else {
- clk->occr = 0xff600001; /* 33 MHz PCI */
- }
-#else
- clk->occr = 0xff000000; /* 66 MHz PCI */
-#endif
- udelay(2000);
-
- /* Configure PCI Local Access Windows */
- pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
- pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
-
- pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
- pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;
-
- udelay(2000);
-
-#ifndef CONFIG_MPC83XX_PCI2
- mpc83xx_pci_init(1, reg);
-#else
- mpc83xx_pci_init(2, reg);
-#endif
-}
diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig
deleted file mode 100644
index 28e4ebf06f5b..000000000000
--- a/configs/MPC8349ITXGP_defconfig
+++ /dev/null
@@ -1,188 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=66666666
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349ITX=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT3=y
-CONFIG_BAT3_NAME="PCI2_MEM"
-CONFIG_BAT3_BASE=0xA0000000
-CONFIG_BAT3_LENGTH_256_MBYTES=y
-CONFIG_BAT3_ACCESS_RW=y
-CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT3_USER_MODE_VALID=y
-CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT4=y
-CONFIG_BAT4_NAME="PCI2_MMIO"
-CONFIG_BAT4_BASE=0xB0000000
-CONFIG_BAT4_LENGTH_256_MBYTES=y
-CONFIG_BAT4_ACCESS_RW=y
-CONFIG_BAT4_ICACHE_INHIBITED=y
-CONFIG_BAT4_ICACHE_GUARDED=y
-CONFIG_BAT4_DCACHE_INHIBITED=y
-CONFIG_BAT4_DCACHE_GUARDED=y
-CONFIG_BAT4_USER_MODE_VALID=y
-CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xF8000000
-CONFIG_LBLAW1_NAME="VSC7385"
-CONFIG_LBLAW1_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xF0000000
-CONFIG_LBLAW3_NAME="CF"
-CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="VSC7385"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_OR1_AM_128_KBYTES=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="LED"
-CONFIG_BR2_OR2_BASE=0xF9000000
-CONFIG_OR2_AM_2_MBYTES=y
-CONFIG_OR2_SCY_9=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CF"
-CONFIG_BR3_OR3_BASE=0xF0000000
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_BR3_MACHINE_UPMA=y
-CONFIG_OR3_BI_BURSTINHIBIT=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFE000000"
-CONFIG_BOOTDELAY=6
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitxgp:eth0:off console=ttyS0,115200"
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="MPC8349E-mITX-GP> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SDRAM=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFE080000
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig
deleted file mode 100644
index 46f7afc071fd..000000000000
--- a/configs/MPC8349ITX_LOWBOOT_defconfig
+++ /dev/null
@@ -1,196 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=66666666
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349ITX=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT3=y
-CONFIG_BAT3_NAME="PCI2_MEM"
-CONFIG_BAT3_BASE=0xA0000000
-CONFIG_BAT3_LENGTH_256_MBYTES=y
-CONFIG_BAT3_ACCESS_RW=y
-CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT3_USER_MODE_VALID=y
-CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT4=y
-CONFIG_BAT4_NAME="PCI2_MMIO"
-CONFIG_BAT4_BASE=0xB0000000
-CONFIG_BAT4_LENGTH_256_MBYTES=y
-CONFIG_BAT4_ACCESS_RW=y
-CONFIG_BAT4_ICACHE_INHIBITED=y
-CONFIG_BAT4_ICACHE_GUARDED=y
-CONFIG_BAT4_DCACHE_INHIBITED=y
-CONFIG_BAT4_DCACHE_GUARDED=y
-CONFIG_BAT4_USER_MODE_VALID=y
-CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xF8000000
-CONFIG_LBLAW1_NAME="VSC7385"
-CONFIG_LBLAW1_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xF0000000
-CONFIG_LBLAW3_NAME="CF"
-CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="VSC7385"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_OR1_AM_128_KBYTES=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="LED"
-CONFIG_BR2_OR2_BASE=0xF9000000
-CONFIG_OR2_AM_2_MBYTES=y
-CONFIG_OR2_SCY_9=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CF"
-CONFIG_BR3_OR3_BASE=0xF0000000
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_BR3_MACHINE_UPMA=y
-CONFIG_OR3_BI_BURSTINHIBIT=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200"
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="MPC8349E-mITX> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_SATA_SIL3114=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig
deleted file mode 100644
index 1f70b756b0c6..000000000000
--- a/configs/MPC8349ITX_defconfig
+++ /dev/null
@@ -1,195 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFEF00000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=66666666
-CONFIG_MPC83xx=y
-CONFIG_HIGH_BATS=y
-CONFIG_TARGET_MPC8349ITX=y
-CONFIG_DDR_MC_CLOCK_MODE_1_1=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_2_1=y
-CONFIG_PCI_HOST_MODE_ENABLE=y
-CONFIG_PCI_INT_ARBITER1_ENABLE=y
-CONFIG_PCI_INT_ARBITER2_ENABLE=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_GMII=y
-CONFIG_TSEC2_MODE_GMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="SDRAM"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_256_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="PCI1_MEM"
-CONFIG_BAT1_BASE=0x80000000
-CONFIG_BAT1_LENGTH_256_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="PCI1_MMIO"
-CONFIG_BAT2_BASE=0x90000000
-CONFIG_BAT2_LENGTH_256_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_INHIBITED=y
-CONFIG_BAT2_ICACHE_GUARDED=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT3=y
-CONFIG_BAT3_NAME="PCI2_MEM"
-CONFIG_BAT3_BASE=0xA0000000
-CONFIG_BAT3_LENGTH_256_MBYTES=y
-CONFIG_BAT3_ACCESS_RW=y
-CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT3_USER_MODE_VALID=y
-CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT4=y
-CONFIG_BAT4_NAME="PCI2_MMIO"
-CONFIG_BAT4_BASE=0xB0000000
-CONFIG_BAT4_LENGTH_256_MBYTES=y
-CONFIG_BAT4_ACCESS_RW=y
-CONFIG_BAT4_ICACHE_INHIBITED=y
-CONFIG_BAT4_ICACHE_GUARDED=y
-CONFIG_BAT4_DCACHE_INHIBITED=y
-CONFIG_BAT4_DCACHE_GUARDED=y
-CONFIG_BAT4_USER_MODE_VALID=y
-CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT5=y
-CONFIG_BAT5_NAME="IMMR"
-CONFIG_BAT5_BASE=0xE0000000
-CONFIG_BAT5_LENGTH_256_MBYTES=y
-CONFIG_BAT5_ACCESS_RW=y
-CONFIG_BAT5_ICACHE_INHIBITED=y
-CONFIG_BAT5_ICACHE_GUARDED=y
-CONFIG_BAT5_DCACHE_INHIBITED=y
-CONFIG_BAT5_DCACHE_GUARDED=y
-CONFIG_BAT5_USER_MODE_VALID=y
-CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT6=y
-CONFIG_BAT6_NAME="STACK_IN_DCACHE"
-CONFIG_BAT6_BASE=0xF0000000
-CONFIG_BAT6_LENGTH_256_MBYTES=y
-CONFIG_BAT6_ACCESS_RW=y
-CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_ICACHE_GUARDED=y
-CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT6_DCACHE_GUARDED=y
-CONFIG_BAT6_USER_MODE_VALID=y
-CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_16_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xF8000000
-CONFIG_LBLAW1_NAME="VSC7385"
-CONFIG_LBLAW1_LENGTH_128_KBYTES=y
-CONFIG_LBLAW3=y
-CONFIG_LBLAW3_BASE=0xF0000000
-CONFIG_LBLAW3_NAME="CF"
-CONFIG_LBLAW3_LENGTH_64_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_16_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_OR0_EAD_EXTRA=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="VSC7385"
-CONFIG_BR1_OR1_BASE=0xF8000000
-CONFIG_OR1_AM_128_KBYTES=y
-CONFIG_OR1_SCY_15=y
-CONFIG_OR1_CSNT_EARLIER=y
-CONFIG_OR1_XACS_EXTENDED=y
-CONFIG_OR1_SETA_EXTERNAL=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_OR1_EAD_EXTRA=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="LED"
-CONFIG_BR2_OR2_BASE=0xF9000000
-CONFIG_OR2_AM_2_MBYTES=y
-CONFIG_OR2_SCY_9=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_OR2_EAD_EXTRA=y
-CONFIG_ELBC_BR3_OR3=y
-CONFIG_BR3_OR3_NAME="CF"
-CONFIG_BR3_OR3_BASE=0xF0000000
-CONFIG_BR3_PORTSIZE_16BIT=y
-CONFIG_BR3_MACHINE_UPMA=y
-CONFIG_OR3_BI_BURSTINHIBIT=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSEC1EP_3=y
-CONFIG_SPCR_TSEC2EP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_4=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=6
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200"
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="MPC8349E-mITX> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_IDE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_SDRAM=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_ADDR=0xFEF80000
-CONFIG_SATA_SIL3114=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
deleted file mode 100644
index f50cdd717cbe..000000000000
--- a/include/configs/MPC8349ITX.h
+++ /dev/null
@@ -1,441 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006.
- */
-
-/*
- MPC8349E-mITX and MPC8349E-mITX-GP board configuration file
-
- Memory map:
-
- 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
- 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
- 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
- 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
- 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
- 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
- 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only)
- 0xF001_0000-0xF001_FFFF Local bus expansion slot
- 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only)
- 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory
- 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only)
-
- I2C address list:
- Align. Board
- Bus Addr Part No. Description Length Location
- ----------------------------------------------------------------
- I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64
-
- I2C1 0x20 PCF8574 I2C Expander 0 U8
- I2C1 0x21 PCF8574 I2C Expander 0 U10
- I2C1 0x38 PCF8574A I2C Expander 0 U8
- I2C1 0x39 PCF8574A I2C Expander 0 U10
- I2C1 0x51 (DDR) DDR EEPROM 1 U1
- I2C1 0x68 DS1339 RTC 1 U68
-
- Note that a given board has *either* a pair of 8574s or a pair of 8574As.
-*/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MISC_INIT_F
-
-/*
- * On-board devices
- */
-
-#ifdef CONFIG_TARGET_MPC8349ITX
-/* The CF card interface on the back of the board */
-#define CONFIG_COMPACT_FLASH
-#define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */
-#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */
-#endif
-
-#include <linux/stringify.h>
-#define CONFIG_RTC_DS1337
-#define CONFIG_SYS_I2C
-
-/*
- * Device configurations
- */
-
-/* I2C */
-#ifdef CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-
-#define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */
-#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */
-
-#define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */
-#define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */
-#define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */
-#define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/
-#define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */
-
-/* Don't probe these addresses: */
-#define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \
- {1, CONFIG_SYS_I2C_8574_ADDR2}, \
- {1, CONFIG_SYS_I2C_8574A_ADDR1}, \
- {1, CONFIG_SYS_I2C_8574A_ADDR2} }
-/* Bit definitions for the 8574[A] I2C expander */
- /* Board revision, 00=0.0, 01=0.1, 10=1.0 */
-#define I2C_8574_REVISION 0x03
-#define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */
-#define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */
-#define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */
-#define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/
-
-#endif
-
-/* Compact Flash */
-#ifdef CONFIG_COMPACT_FLASH
-
-#define CONFIG_SYS_IDE_MAXBUS 1
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000
-#define CONFIG_SYS_ATA_REG_OFFSET 0
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0200
-#define CONFIG_SYS_ATA_STRIDE 2
-
-/* If a CF card is not inserted, time out quickly */
-#define ATA_RESET_TIME 1
-
-#endif
-
-/*
- * SATA
- */
-#ifdef CONFIG_SATA_SIL3114
-
-#define CONFIG_SYS_SATA_MAX_DEVICE 4
-#define CONFIG_LBA48
-
-#endif
-
-#ifdef CONFIG_SYS_USB_HOST
-/*
- * Support USB
- */
-#define CONFIG_USB_EHCI_FSL
-
-/* Current USB implementation supports the only USB controller,
- * so we have to choose between the MPH or the DR ones */
-#if 1
-#define CONFIG_HAS_FSL_MPH_USB
-#else
-#define CONFIG_HAS_FSL_DR_USB
-#endif
-
-#endif
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/
-#define CONFIG_SYS_83XX_DDR_USES_CS0
-
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
- | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
-
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20)
-
-#ifdef CONFIG_SYS_I2C
-#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/
-#endif
-
-/* No SPD? Then manually set up DDR parameters */
-#ifndef CONFIG_SPD_EEPROM
- #define CONFIG_SYS_DDR_SIZE 256 /* Mb */
- #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \
- | CSCONFIG_ROW_BIT_13 \
- | CSCONFIG_COL_BIT_10)
-
- #define CONFIG_SYS_DDR_TIMING_1 0x26242321
- #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */
-#endif
-
-/*
- *Flash on the Local Bus
- */
-
-#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-/* 127 64KB sectors + 8 8KB sectors per device */
-#define CONFIG_SYS_MAX_FLASH_SECT 135
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-
-/* The ITX has two flash chips, but the ITX-GP has only one. To support both
-boards, we say we have two, but don't display a message if we find only one. */
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
-#define CONFIG_SYS_FLASH_BANKS_LIST \
- {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000}
-#define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */
-
-/* Vitesse 7385 */
-
-#ifdef CONFIG_VSC7385_ENET
-
-#define CONFIG_TSEC2
-
-/* The flash address and size of the VSC7385 firmware image */
-#define CONFIG_VSC7385_IMAGE 0xFEFFE000
-#define CONFIG_VSC7385_IMAGE_SIZE 8192
-
-#endif
-
-/*
- * BRx, ORx, LBLAWBARx, and LBLAWARx
- */
-
-
-/* Vitesse 7385 */
-
-#define CONFIG_SYS_VSC7385_BASE 0xF8000000
-
-#define CONFIG_SYS_LED_BASE 0xF9000000
-
-
-/* Compact Flash */
-
-#ifdef CONFIG_COMPACT_FLASH
-
-#define CONFIG_SYS_CF_BASE 0xF0000000
-
-
-#endif
-
-/*
- * U-Boot memory configuration
- */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#else
-#undef CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */
-
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
-
-#define CONSOLE ttyS0
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
-
-/*
- * PCI
- */
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-
-#define CONFIG_MPC83XX_PCI2
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
-#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
-#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_MMIO_BASE \
- (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE)
-#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
-#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
-#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */
-
-#ifdef CONFIG_MPC83XX_PCI2
-#define CONFIG_SYS_PCI2_MEM_BASE \
- (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE)
-#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
-#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_MMIO_BASE \
- (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE)
-#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
-#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
-#define CONFIG_SYS_PCI2_IO_PHYS \
- (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE)
-#define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */
-#endif
-
-#ifndef CONFIG_PCI_PNP
- #define PCI_ENET0_IOADDR 0x00000000
- #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE
- #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#endif
-
-/* TSEC */
-
-#ifdef CONFIG_TSEC_ENET
-#define CONFIG_TSEC1
-
-#ifdef CONFIG_TSEC1
-#define CONFIG_HAS_ETH0
-#define CONFIG_TSEC1_NAME "TSEC0"
-#define CONFIG_SYS_TSEC1_OFFSET 0x24000
-#define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */
-#define TSEC1_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#endif
-
-#ifdef CONFIG_TSEC2
-#define CONFIG_HAS_ETH1
-#define CONFIG_TSEC2_NAME "TSEC1"
-#define CONFIG_SYS_TSEC2_OFFSET 0x25000
-
-#define TSEC2_PHY_ADDR 4
-#define TSEC2_PHYIDX 0
-#define TSEC2_FLAGS TSEC_GIGABIT
-#endif
-
-#define CONFIG_ETHPRIME "Freescale TSEC"
-
-#endif
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/* Watchdog */
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
- /* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-/*
- * System performance
- */
-#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */
-#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */
-#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */
-
-/*
- * System IO Config
- */
-/* Needed for gigabit to work on TSEC 1 */
-#define CONFIG_SYS_SICRH SICRH_TSOBI1
- /* USB DR as device + USB MPH as host */
-#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_NETDEV "eth0"
-
-/* Default path and filenames */
-#define CONFIG_ROOTPATH "/nfsroot/rootfs"
-#define CONFIG_BOOTFILE "uImage"
- /* U-Boot image on TFTP server */
-#define CONFIG_UBOOTPATH "u-boot.bin"
-
-#ifdef CONFIG_TARGET_MPC8349ITX
-#define CONFIG_FDTFILE "mpc8349emitx.dtb"
-#else
-#define CONFIG_FDTFILE "mpc8349emitxgp.dtb"
-#endif
-
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console=" __stringify(CONSOLE) "\0" \
- "netdev=" CONFIG_NETDEV "\0" \
- "uboot=" CONFIG_UBOOTPATH "\0" \
- "tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "erase " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize; " \
- "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
- " +$filesize; " \
- "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \
- " $filesize\0" \
- "fdtaddr=780000\0" \
- "fdtfile=" CONFIG_FDTFILE "\0"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \
- " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\
- " console=$console,$baudrate $othbootargs; " \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw" \
- " console=$console,$baudrate $othbootargs; " \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif
--
2.17.1
More information about the U-Boot
mailing list