[PATCH 3/3] arm: mvebu: Initial ESPRESSOBin-Ultra board support
Luka Kovacic
luka.kovacic at sartura.hr
Thu Feb 4 11:46:37 CET 2021
Add initial support for the ESPRESSOBin-Ultra board from Globalscale
Technologies, Inc.
The board is based on the 64-bit dual-core Marvell Armada 3720 SoC.
Peripherals:
- 5 Gigabit Ethernet ports (WAN has PoE, up to 30W, Topaz 6341 switch)
- RTC clock (PCF8563)
- USB 3.0 port
- USB 2.0 port
- 4x LED
- UART over Micro-USB
- M.2 slot (2280)
- Mini PCI-E slot
Additionally, automatic import of the Marvell hw_info parameters is
enabled via the recently added env import -h flag.
The parameters stored in Marvell hw_info are usually the board serial
number and MAC addresses.
Signed-off-by: Luka Kovacic <luka.kovacic at sartura.hr>
Cc: Luka Perkov <luka.perkov at sartura.hr>
Cc: Robert Marko <robert.marko at sartura.hr>
---
arch/arm/dts/Makefile | 1 +
.../arm/dts/armada-3720-espressobin-ultra.dts | 202 ++++++++++++++++++
board/Marvell/mvebu_armada-37xx/MAINTAINERS | 8 +
board/Marvell/mvebu_armada-37xx/board.c | 76 ++++++-
.../mvebu_espressobin-ultra-88f3720_defconfig | 90 ++++++++
5 files changed, 371 insertions(+), 6 deletions(-)
create mode 100644 arch/arm/dts/armada-3720-espressobin-ultra.dts
create mode 100644 configs/mvebu_espressobin-ultra-88f3720_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 858b79ac97..51455c0271 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -210,6 +210,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
dtb-$(CONFIG_ARCH_MVEBU) += \
armada-3720-db.dtb \
armada-3720-espressobin.dtb \
+ armada-3720-espressobin-ultra.dtb \
armada-3720-turris-mox.dtb \
armada-3720-uDPU.dtb \
armada-375-db.dtb \
diff --git a/arch/arm/dts/armada-3720-espressobin-ultra.dts b/arch/arm/dts/armada-3720-espressobin-ultra.dts
new file mode 100644
index 0000000000..70f97fe239
--- /dev/null
+++ b/arch/arm/dts/armada-3720-espressobin-ultra.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for ESPRESSObin-Ultra board
+ * Copyright (C) 2016 Marvell
+ * Copyright (C) 2019 Globalscale technologies, Inc.
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Author: Jason Hung <jhung at globalscaletechnologies.com>
+ * Author: Luka Kovacic <luka.kovacic at sartura.hr>
+ * Author: Vladimir Vid <vladimir.vid at sartura.hr>
+ */
+
+/dts-v1/;
+
+#include "armada-372x.dtsi"
+
+/ {
+ model = "Globalscale Marvell ESPRESSOBin Ultra Board";
+ compatible = "globalscale,espressobin-ultra", "marvell,armada3720", "marvell,armada3710";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = ð0;
+ i2c0 = &i2c0;
+ spi0 = &spi0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+ };
+
+ vcc_sd_reg0: regulator at 0 {
+ compatible = "regulator-gpio";
+ regulator-name = "vcc_sd0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-type = "voltage";
+ states = <1800000 0x1
+ 3300000 0x0>;
+ gpios = <&gpionb 4 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&led1_pins>, <&led2_pins>, <&led3_pins>, <&led4_pins>;
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led2 {
+ label = "led2";
+ gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led3 {
+ label = "led3";
+ gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led4 {
+ label = "led4";
+ gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&pinctrl_nb {
+ led1_pins: led1-pins {
+ groups = "pwm0";
+ function = "gpio";
+ };
+ led2_pins: led2-pins {
+ groups = "pwm1";
+ function = "gpio";
+ };
+ led3_pins: led3-pins {
+ groups = "pwm2";
+ function = "gpio";
+ };
+ led4_pins: led4-pins {
+ groups = "pwm3";
+ function = "gpio";
+ };
+};
+
+&comphy {
+ max-lanes = <3>;
+ phy0 {
+ phy-type = <PHY_TYPE_USB3_HOST0>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+
+ phy1 {
+ phy-type = <PHY_TYPE_PEX0>;
+ phy-speed = <PHY_SPEED_2_5G>;
+ };
+
+ phy2 {
+ phy-type = <PHY_TYPE_SATA0>;
+ phy-speed = <PHY_SPEED_5G>;
+ };
+};
+
+ð0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+ phy-mode = "rgmii";
+ phy_addr = <0x3>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc at 51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&sdhci0 {
+ status = "disabled";
+};
+
+/* U11 */
+&sdhci1 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,xenon-emmc;
+ marvell,xenon-tun-count = <9>;
+ marvell,pad-type = "fixed-1-8v";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc_pins>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mmccard: mmccard at 0 {
+ compatible = "mmc-card";
+ reg = <0>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_quad_pins>;
+
+ spi-flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p128", "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ };
+};
+
+/* Exported on the micro USB connector through an FTDI */
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
diff --git a/board/Marvell/mvebu_armada-37xx/MAINTAINERS b/board/Marvell/mvebu_armada-37xx/MAINTAINERS
index f2c0a582d7..d69af832fc 100644
--- a/board/Marvell/mvebu_armada-37xx/MAINTAINERS
+++ b/board/Marvell/mvebu_armada-37xx/MAINTAINERS
@@ -10,6 +10,14 @@ M: Konstantin Porotchkin <kostap at marvell.com>
S: Maintained
F: configs/mvebu_espressobin-88f3720_defconfig
+ESPRESSOBin-Ultra BOARD
+M: Luka Kovacic <luka.kovacic at sartura.hr>
+M: Robert Marko <robert.marko at sartura.hr>
+M: Luka Perkov <luka.perkov at sartura.hr>
+S: Maintained
+F: arch/arm/dts/armada-3720-espressobin-ultra.dts
+F: configs/mvebu_espressobin-ultra-88f3720_defconfig
+
uDPU BOARD
M: Vladimir Vid <vladimir.vid at sartura.hr>
S: Maintained
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index 1b9e7520cc..b92b7950e1 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -10,6 +10,7 @@
#include <i2c.h>
#include <init.h>
#include <mmc.h>
+#include <miiphy.h>
#include <phy.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
@@ -53,6 +54,15 @@ DECLARE_GLOBAL_DATA_PTR;
#define MVEBU_G2_SMI_PHY_CMD_REG (24)
#define MVEBU_G2_SMI_PHY_DATA_REG (25)
+/* Marvell 88E1512 */
+#define MII_MARVELL_PHY_PAGE 22
+
+#define MV88E1512_GENERAL_CTRL 20
+#define MV88E1512_MODE_SGMII 1
+#define MV88E1512_RESET_OFFS 15
+
+#define ULTRA_MV88E1512_PHYADDR 0x1
+
/*
* Memory Controller Registers
*
@@ -258,12 +268,52 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
return 0;
}
-/* Bring-up board-specific network stuff */
-int board_network_enable(struct mii_dev *bus)
+void force_phy_88e1512_sgmii_to_copper(u16 devaddr)
{
- if (!of_machine_is_compatible("globalscale,espressobin"))
- return 0;
+ const char *name;
+ u16 reg;
+
+ name = miiphy_get_current_dev();
+ if (name) {
+ /* SGMII-to-Copper mode initialization */
+
+ /* Select page 18 */
+ miiphy_write(name, devaddr, MII_MARVELL_PHY_PAGE, 0x12);
+ /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */
+ miiphy_read(name, devaddr, MV88E1512_GENERAL_CTRL, ®);
+ reg &= ~0x7;
+ reg |= MV88E1512_MODE_SGMII;
+ miiphy_write(name, devaddr, MV88E1512_GENERAL_CTRL, reg);
+ /* PHY reset is necessary after changing MODE[2:0] */
+ miiphy_read(name, devaddr, MV88E1512_GENERAL_CTRL, ®);
+ reg |= 1 << MV88E1512_RESET_OFFS;
+ miiphy_write(name, devaddr, MV88E1512_GENERAL_CTRL, reg);
+ /* Reset page selection */
+ miiphy_write(name, devaddr, MII_MARVELL_PHY_PAGE, 0);
+ udelay(100);
+ }
+}
+
+int board_network_enable_espressobin_ultra(struct mii_dev *bus)
+{
+ /* Setup 88E1512 SGMII-to-Copper mode */
+ force_phy_88e1512_sgmii_to_copper(ULTRA_MV88E1512_PHYADDR);
+ /* Restrict output to ports 1,2,3,4 only from port 0 (CPU) */
+ mii_multi_chip_mode_write(bus, 3, MVEBU_PORT_CTRL_SMI_ADDR(1),
+ MVEBU_SW_PORT_BASE_VLAN, BIT(0));
+ mii_multi_chip_mode_write(bus, 3, MVEBU_PORT_CTRL_SMI_ADDR(2),
+ MVEBU_SW_PORT_BASE_VLAN, BIT(0));
+ mii_multi_chip_mode_write(bus, 3, MVEBU_PORT_CTRL_SMI_ADDR(3),
+ MVEBU_SW_PORT_BASE_VLAN, BIT(0));
+ mii_multi_chip_mode_write(bus, 3, MVEBU_PORT_CTRL_SMI_ADDR(4),
+ MVEBU_SW_PORT_BASE_VLAN, BIT(0));
+
+ return 0;
+}
+
+int board_network_enable_espressobin(struct mii_dev *bus)
+{
/*
* FIXME: remove this code once Topaz driver gets available
* A3720 Community Board Only
@@ -304,6 +354,16 @@ int board_network_enable(struct mii_dev *bus)
return 0;
}
+/* Bring-up the board-specific networking */
+int board_network_enable(struct mii_dev *bus)
+{
+ if (of_machine_is_compatible("globalscale,espressobin"))
+ return board_network_enable_espressobin(bus);
+ if (of_machine_is_compatible("globalscale,espressobin-ultra"))
+ return board_network_enable_espressobin_ultra(bus);
+ return 0;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
int ft_board_setup(void *blob, struct bd_info *bd)
{
@@ -312,8 +372,12 @@ int ft_board_setup(void *blob, struct bd_info *bd)
int parts_off;
int part_off;
- /* Fill SPI MTD partitions for Linux kernel on Espressobin */
- if (!of_machine_is_compatible("globalscale,espressobin"))
+ /*
+ * Fill SPI MTD partitions for the Linux kernel on ESPRESSOBin and
+ * ESPRESSOBin Ultra boards.
+ */
+ if (!of_machine_is_compatible("globalscale,espressobin") &&
+ !of_machine_is_compatible("globalscale,espressobin-ultra"))
return 0;
spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
diff --git a/configs/mvebu_espressobin-ultra-88f3720_defconfig b/configs/mvebu_espressobin-ultra-88f3720_defconfig
new file mode 100644
index 0000000000..e40e280d62
--- /dev/null
+++ b/configs/mvebu_espressobin-ultra-88f3720_defconfig
@@ -0,0 +1,90 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_TARGET_MVEBU_ARMADA_37XX=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x3F0000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_CLOCK=25804800
+CONFIG_DEFAULT_DEVICE_TREE="armada-3720-espressobin-ultra"
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_FIT_BEST_MATCH=y
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
+CONFIG_AUTOBOOT_STOP_STR="s"
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_HUSH_PARSER=y
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="if printenv read_board_hw_info; then echo \"Marvell hw_info already imported...\" ; else echo \"Importing Marvell hw_info...\"; sf probe; sf read ${loadaddr} 0x003E000A 0x1F0; env import -h ${loadaddr}; setenv read_board_hw_info 1; fi"
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_CPUINFO is not set
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ARCH_EARLY_INIT_R=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MVEBU_BUBT=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_MAC_PARTITION=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_CLK=y
+CONFIG_CLK_MVEBU=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_SDMA=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MTD=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_PHY_MARVELL=y
+CONFIG_MVNETA=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_MVEBU_COMPHY_SUPPORT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_37XX=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_MVEBU_A3700_UART=y
+CONFIG_MVEBU_A3700_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF8563=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
--
2.20.1
More information about the U-Boot
mailing list