[PATCH 28/57] arm: Remove usbarmory board
Tom Rini
trini at konsulko.com
Sun Feb 21 02:06:05 CET 2021
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Andrej Rosano <andrej at inversepath.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/mach-imx/mx5/Kconfig | 5 -
board/inversepath/usbarmory/Kconfig | 15 -
board/inversepath/usbarmory/MAINTAINERS | 6 -
board/inversepath/usbarmory/Makefile | 10 -
board/inversepath/usbarmory/imximage.cfg | 81 ----
board/inversepath/usbarmory/usbarmory.c | 452 -----------------------
configs/usbarmory_defconfig | 26 --
include/configs/usbarmory.h | 94 -----
8 files changed, 689 deletions(-)
delete mode 100644 board/inversepath/usbarmory/Kconfig
delete mode 100644 board/inversepath/usbarmory/MAINTAINERS
delete mode 100644 board/inversepath/usbarmory/Makefile
delete mode 100644 board/inversepath/usbarmory/imximage.cfg
delete mode 100644 board/inversepath/usbarmory/usbarmory.c
delete mode 100644 configs/usbarmory_defconfig
delete mode 100644 include/configs/usbarmory.h
diff --git a/arch/arm/mach-imx/mx5/Kconfig b/arch/arm/mach-imx/mx5/Kconfig
index bde37bb97e13..2ffa3fa61690 100644
--- a/arch/arm/mach-imx/mx5/Kconfig
+++ b/arch/arm/mach-imx/mx5/Kconfig
@@ -80,10 +80,6 @@ config TARGET_TS4800
bool "Support TS4800"
select MX51
-config TARGET_USBARMORY
- bool "Support USB armory"
- select MX53
-
endchoice
config SYS_SOC
@@ -96,7 +92,6 @@ source "board/freescale/mx53evk/Kconfig"
source "board/freescale/mx53loco/Kconfig"
source "board/freescale/mx53smd/Kconfig"
source "board/ge/mx53ppd/Kconfig"
-source "board/inversepath/usbarmory/Kconfig"
source "board/k+p/kp_imx53/Kconfig"
source "board/menlo/m53menlo/Kconfig"
source "board/technologic/ts4800/Kconfig"
diff --git a/board/inversepath/usbarmory/Kconfig b/board/inversepath/usbarmory/Kconfig
deleted file mode 100644
index c2cd54437da9..000000000000
--- a/board/inversepath/usbarmory/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_USBARMORY
-
-config IMX_CONFIG
- default "board/inversepath/usbarmory/imximage.cfg"
-
-config SYS_BOARD
- default "usbarmory"
-
-config SYS_VENDOR
- default "inversepath"
-
-config SYS_CONFIG_NAME
- default "usbarmory"
-
-endif
diff --git a/board/inversepath/usbarmory/MAINTAINERS b/board/inversepath/usbarmory/MAINTAINERS
deleted file mode 100644
index 71a3dd40f13e..000000000000
--- a/board/inversepath/usbarmory/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-USBARMORY BOARD
-M: Andrej Rosano <andrej at inversepath.com>
-S: Maintained
-F: board/inversepath/usbarmory/
-F: include/configs/usbarmory.h
-F: configs/usbarmory_defconfig
diff --git a/board/inversepath/usbarmory/Makefile b/board/inversepath/usbarmory/Makefile
deleted file mode 100644
index 9b8bd80ab387..000000000000
--- a/board/inversepath/usbarmory/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# USB armory MkI board Makefile
-# http://inversepath.com/usbarmory
-#
-# Copyright (C) 2015, Inverse Path
-# Andrej Rosano <andrej at inversepath.com>
-#
-# SPDX-License-Identifier:|____GPL-2.0+
-
-obj-y := usbarmory.o
diff --git a/board/inversepath/usbarmory/imximage.cfg b/board/inversepath/usbarmory/imximage.cfg
deleted file mode 100644
index d23885bed715..000000000000
--- a/board/inversepath/usbarmory/imximage.cfg
+++ /dev/null
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * USB armory MkI board imximage configuration
- * http://inversepath.com/usbarmory
- *
- * Copyright (C) 2015, Inverse Path
- * Andrej Rosano <andrej at inversepath.com>
- */
-
-IMAGE_VERSION 2
-BOOT_FROM sd
-
-
-/* IOMUX */
-
-DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
-DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
-DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
-DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
-
-DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
-DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
-DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
-
-DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
-DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
-DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
-
-DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
-DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
-DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
-
-DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
-DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
-DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
-
-DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK0 */
-DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK1 */
-
-DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
-DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
-DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDS */
-DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
-
-DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
-DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
-
-
-/* ESDCTL */
-
-DATA 4 0x63fd9000 0x84180000 /* ESDCTL_ESDCTL */
-
-DATA 4 0x63fd9004 0x0002002d /* ESDCTL_ESDPTC */
-DATA 4 0x63fd9008 0x12273030 /* ESDCTL_ESDOTC */
-DATA 4 0x63fd900c 0x9f5152e3 /* ESDCTL_ESDCFG0 */
-DATA 4 0x63fd9010 0xb68e8a63 /* ESDCTL_ESDCFG1 */
-DATA 4 0x63fd9014 0x01ff00db /* ESDCTL_ESDCFG2 */
-DATA 4 0x63fd9018 0x00011740 /* ESDCTL_ESDMISC */
-
-DATA 4 0x63fd901c 0x00008032 /* ESDCTL_ESDSCR */
-DATA 4 0x63fd901c 0x00008033
-DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x052080b0
-DATA 4 0x63fd901c 0x04008040
-DATA 4 0x63fd901c 0x0000803a
-DATA 4 0x63fd901c 0x0000803b
-DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x05208138
-DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd901c 0x00000000
-
-DATA 4 0x63fd9020 0x00005800 /* ESDCTL_ESDREF */
-DATA 4 0x63fd902c 0x000026d2 /* ESDCTL_ESDEWD */
-DATA 4 0x63fd9030 0x009f0e21 /* ESDCTL_ESDOR */
-DATA 4 0x63fd9040 0x05380003 /* ESDCTL_ZQHWCTRL */
-DATA 4 0x63fd9058 0x00022227 /* ESDCTL_ODTCTRL */
-
-DATA 4 0x63fd907c 0x01370138 /* ESDCTL_DGCTRL0 */
-DATA 4 0x63fd9080 0x013b013c /* ESDCTL_DGCTRL1 */
-DATA 4 0x63fd9088 0x35343535 /* ESDCTL_RDDLCTL */
-DATA 4 0x63fd9090 0x4d444c44 /* ESDCTL_WRDLCTL */
diff --git a/board/inversepath/usbarmory/usbarmory.c b/board/inversepath/usbarmory/usbarmory.c
deleted file mode 100644
index 086d0522c78a..000000000000
--- a/board/inversepath/usbarmory/usbarmory.c
+++ /dev/null
@@ -1,452 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * USB armory MkI board initialization
- * http://inversepath.com/usbarmory
- *
- * Copyright (C) 2015, Inverse Path
- * Andrej Rosano <andrej at inversepath.com>
- */
-
-#include <common.h>
-#include <command.h>
-#include <fs.h>
-#include <init.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx53.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <asm/gpio.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u32 get_board_rev(void)
-{
- struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
- struct fuse_bank *bank = &iim->bank[0];
- struct fuse_bank0_regs *fuse =
- (struct fuse_bank0_regs *)bank->fuse_regs;
-
- int rev = readl(&fuse->gp[6]);
-
- return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
-}
-
-struct fsl_esdhc_cfg esdhc_cfg[1] = {
- {MMC_SDHC1_BASE_ADDR}
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- /* CD not present */
- return 1;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
- int ret = 0;
-
- esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
-
- return ret;
-}
-
-#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-#define PAD_CTRL_UP PAD_CTL_PUS_100K_UP
-#define PAD_CTRL_GND PAD_CTL_PUS_100K_DOWN
-
-static void setup_iomux_sd(void)
-{
- static const iomux_v3_cfg_t pads[] = {
- NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, MX53_SDHC_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
- MX53_SDHC_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
- MX53_SDHC_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
- MX53_SDHC_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
- MX53_SDHC_PAD_CTRL),
- MX53_PAD_EIM_DA13__GPIO3_13,
- };
-
- imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
-}
-
-static void setup_iomux_led(void)
-{
- static const iomux_v3_cfg_t pads[] = {
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT6__GPIO4_27,
- PAD_CTL_PUS_100K_DOWN),
- };
-
- imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
-}
-
-static void setup_iomux_i2c(void)
-{
- static const iomux_v3_cfg_t pads[] = {
- NEW_PAD_CTRL(MX53_PAD_EIM_D28__I2C1_SDA, I2C_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_EIM_D21__I2C1_SCL, I2C_PAD_CTRL),
- };
-
- imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
-}
-
-static void setup_iomux_pinheader(void)
-{
- static const iomux_v3_cfg_t pads[] = {
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__GPIO5_26, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__GPIO5_27, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
- MX53_UART_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
- MX53_UART_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT12__GPIO5_30, PAD_CTRL_UP),
- };
-
- imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
-}
-
-static void setup_iomux_unused_boot(void)
-{
- static const iomux_v3_cfg_t pads[] = {
- /* Pulled-up pads */
- NEW_PAD_CTRL(MX53_PAD_EIM_A21__GPIO2_17, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA0__GPIO3_0, PAD_CTRL_UP),
-
- /* Grounded pads */
- NEW_PAD_CTRL(MX53_PAD_EIM_LBA__GPIO2_27, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_EB0__GPIO2_28, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_EB1__GPIO2_29, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_A16__GPIO2_22, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_A17__GPIO2_21, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_A18__GPIO2_20, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_A19__GPIO2_19, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_A20__GPIO2_18, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_A22__GPIO2_16, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA1__GPIO3_1, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA2__GPIO3_2, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA3__GPIO3_3, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA4__GPIO3_4, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA5__GPIO3_5, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA6__GPIO3_6, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA7__GPIO3_7, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA8__GPIO3_8, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA9__GPIO3_9, PAD_CTRL_GND),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA10__GPIO3_10, PAD_CTRL_GND),
- };
-
- imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
-}
-
-static void setup_iomux_unused_nc(void)
-{
- /* Out of reset values define the pin values before the
- ROM is executed so we force all the not connected pins
- to a known state */
- static const iomux_v3_cfg_t pads[] = {
- /* CONTROL PINS block */
- NEW_PAD_CTRL(MX53_PAD_GPIO_0__GPIO1_0, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_1__GPIO1_1, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_3__GPIO1_3, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_5__GPIO1_5, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_6__GPIO1_6, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_7__GPIO1_7, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_8__GPIO1_8, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_9__GPIO1_9, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_11__GPIO4_1, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_12__GPIO4_2, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_13__GPIO4_3, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_14__GPIO4_4, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_16__GPIO7_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_17__GPIO7_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_18__GPIO7_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_GPIO_19__GPIO4_5, PAD_CTRL_UP),
-
- /* EIM block */
- NEW_PAD_CTRL(MX53_PAD_EIM_OE__GPIO2_25, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_WAIT__GPIO5_0, PAD_CTRL_UP),
- /* EIM_LBA: setup_iomux_unused_boot() */
- NEW_PAD_CTRL(MX53_PAD_EIM_RW__GPIO2_26, PAD_CTRL_UP),
- /* EIM_EB0: setup_iomux_unused_boot() */
- /* EIM_EB1: setup_iomux_unused_boot() */
- NEW_PAD_CTRL(MX53_PAD_EIM_EB2__GPIO2_30, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_EB3__GPIO2_31, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_CS0__GPIO2_23, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_CS1__GPIO2_24, PAD_CTRL_UP),
- /* EIM_A16: setup_iomux_unused_boot() */
- /* EIM_A17: setup_iomux_unused_boot() */
- /* EIM_A18: setup_iomux_unused_boot() */
- /* EIM_A19: setup_iomux_unused_boot() */
- /* EIM_A20: setup_iomux_unused_boot() */
- /* EIM_A21: setup_iomux_unused_boot() */
- /* EIM_A22: setup_iomux_unused_boot() */
- NEW_PAD_CTRL(MX53_PAD_EIM_A23__GPIO6_6, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_A24__GPIO5_4, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_A25__GPIO5_2, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D16__GPIO3_16, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D17__GPIO3_17, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D18__GPIO3_18, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D19__GPIO3_19, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D20__GPIO3_20, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D21__GPIO3_21, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D22__GPIO3_22, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D23__GPIO3_23, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D24__GPIO3_24, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D25__GPIO3_25, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D26__GPIO3_26, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D27__GPIO3_27, PAD_CTRL_UP),
- /* EIM_D28: setup_iomux_unused_boot() */
- /* EIM_D29: setup_iomux_unused_boot() */
- NEW_PAD_CTRL(MX53_PAD_EIM_D30__GPIO3_30, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_D31__GPIO3_31, PAD_CTRL_UP),
- /* EIM_DA0: setup_iomux_unused_boot() */
- /* EIM_DA1: setup_iomux_unused_boot() */
- /* EIM_DA2: setup_iomux_unused_boot() */
- /* EIM_DA3: setup_iomux_unused_boot() */
- /* EIM_DA4: setup_iomux_unused_boot() */
- /* EIM_DA5: setup_iomux_unused_boot() */
- /* EIM_DA6: setup_iomux_unused_boot() */
- /* EIM_DA7: setup_iomux_unused_boot() */
- /* EIM_DA8: setup_iomux_unused_boot() */
- /* EIM_DA9: setup_iomux_unused_boot() */
- /* EIM_DA10: setup_iomux_unused_boot() */
- NEW_PAD_CTRL(MX53_PAD_EIM_DA11__GPIO3_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA12__GPIO3_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA13__GPIO3_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA14__GPIO3_14, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_EIM_DA15__GPIO3_15, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__GPIO6_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__GPIO6_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__GPIO6_8, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__GPIO6_7, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__GPIO6_9, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__GPIO6_10, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__GPIO6_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__GPIO6_14, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS2__GPIO6_15, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS3__GPIO6_16, PAD_CTRL_UP),
-
- /* MISC block */
- NEW_PAD_CTRL(MX53_PAD_FEC_MDC__GPIO1_31, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__GPIO1_22, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__GPIO1_25, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__GPIO1_23, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__GPIO1_24, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__GPIO1_28, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__GPIO1_27, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__GPIO1_26, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__GPIO1_30, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__GPIO1_29, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL0__GPIO4_6, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__GPIO4_7, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL1__GPIO4_8, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__GPIO4_9, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL2__GPIO4_10, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__GPIO4_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL3__GPIO4_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW3__GPIO4_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL4__GPIO4_14, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW4__GPIO4_15, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_SD2_CMD__GPIO1_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_SD2_CLK__GPIO1_10, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__GPIO1_15, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__GPIO1_14, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__GPIO1_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__GPIO1_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_BUFFER_EN__GPIO7_1, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_CS_0__GPIO7_9, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_CS_1__GPIO7_10, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DA_0__GPIO7_6, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DA_1__GPIO7_7, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DA_2__GPIO7_8, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__GPIO2_0, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__GPIO2_1, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__GPIO2_2, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__GPIO2_3, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__GPIO2_4, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__GPIO2_5, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__GPIO2_6, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__GPIO2_7, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__GPIO2_8, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__GPIO2_9, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__GPIO2_10, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__GPIO2_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__GPIO2_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__GPIO2_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__GPIO2_14, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__GPIO2_15, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DIOR__GPIO7_3, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__GPIO6_17, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__GPIO6_18, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_DMARQ__GPIO7_0, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_INTRQ__GPIO7_2, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__GPIO7_5, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__GPIO7_4, PAD_CTRL_UP),
-
- /* IPU block */
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT4__GPIO5_22, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT5__GPIO5_23, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT6__GPIO5_24, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT7__GPIO5_25, PAD_CTRL_UP),
- /* CSI0_DAT8: setup_iomux_pinheader() */
- /* CSI0_DAT9: setup_iomux_pinheader() */
- /* CSI0_DAT10: setup_iomux_pinheader() */
- /* CSI0_DAT11: setup_iomux_pinheader() */
- /* CSI0_DAT12: setup_iomux_pinheader() */
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT13__GPIO5_31, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT14__GPIO6_0, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT15__GPIO6_1, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT16__GPIO6_2, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT17__GPIO6_3, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT18__GPIO6_4, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DAT19__GPIO6_5, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_VSYNC__GPIO5_21, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_PIXCLK__GPIO5_18, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_MCLK__GPIO5_19, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_CSI0_DATA_EN__GPIO5_20, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DI0_PIN2__GPIO4_18, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DI0_PIN3__GPIO4_19, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DI0_PIN4__GPIO4_20, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DI0_PIN15__GPIO4_17, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT0__GPIO4_21, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT1__GPIO4_22, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT2__GPIO4_23, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT3__GPIO4_24, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT4__GPIO4_25, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT5__GPIO4_26, PAD_CTRL_UP),
- /* DISP0_DAT6: setup_iomux_led() */
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT7__GPIO4_28, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT8__GPIO4_29, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT9__GPIO4_30, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT10__GPIO4_31, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT11__GPIO5_5, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT12__GPIO5_6, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT13__GPIO5_7, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT14__GPIO5_8, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT15__GPIO5_9, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT16__GPIO5_10, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT17__GPIO5_11, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT18__GPIO5_12, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT19__GPIO5_13, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT20__GPIO5_14, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT21__GPIO5_15, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT22__GPIO5_16, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DISP0_DAT23__GPIO5_17, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_DI0_DISP_CLK__GPIO4_16, PAD_CTRL_UP),
-
- /* LVDS block */
- NEW_PAD_CTRL(MX53_PAD_LVDS0_TX0_P__GPIO7_30, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS0_TX1_P__GPIO7_28, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS0_TX2_P__GPIO7_26, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS0_TX3_P__GPIO7_22, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS1_TX0_P__GPIO6_30, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS1_TX1_P__GPIO6_28, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS1_TX2_P__GPIO6_24, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS1_TX3_P__GPIO6_22, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS0_CLK_P__GPIO7_24, PAD_CTRL_UP),
- NEW_PAD_CTRL(MX53_PAD_LVDS1_CLK_P__GPIO6_26, PAD_CTRL_UP),
- };
-
- imx_iomux_v3_setup_multiple_pads(pads, ARRAY_SIZE(pads));
-}
-
-#define CPU_CLOCK 800
-
-static void set_clock(void)
-{
- u32 ref_clk = MXC_HCLK;
- const uint32_t cpuclk = CPU_CLOCK;
- const uint32_t dramclk = 400;
- int ret;
-
- ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
- if (ret)
- printf("CPU: Switch CPU clock to %dMHZ failed\n", cpuclk);
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
- if (ret)
- printf("CPU: Switch peripheral clock to %dMHz failed\n",
- dramclk);
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
- if (ret)
- printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
-}
-
-int board_early_init_f(void)
-{
- setup_iomux_unused_nc();
- setup_iomux_unused_boot();
- setup_iomux_sd();
- setup_iomux_led();
- setup_iomux_pinheader();
- set_clock();
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- setup_iomux_i2c();
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, 1 << 30);
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: Inverse Path USB armory MkI\n");
- return 0;
-}
-
-#ifndef CONFIG_CMDLINE
-static char *ext2_argv[] = {
- "ext2load",
- "mmc",
- "0:1",
- USBARMORY_FIT_ADDR,
- USBARMORY_FIT_PATH
-};
-
-static char *bootm_argv[] = {
- "bootm",
- USBARMORY_FIT_ADDR
-};
-
-int board_run_command(const char *cmdline)
-{
- printf("%s %s %s %s %s\n", ext2_argv[0], ext2_argv[1], ext2_argv[2],
- ext2_argv[3], ext2_argv[4]);
-
- if (do_ext2load(NULL, 0, 5, ext2_argv) != 0) {
- udelay(5*1000*1000);
- return 1;
- }
-
- printf("%s %s\n", bootm_argv[0], bootm_argv[1]);
- do_bootm(NULL, 0, 2, bootm_argv);
-
- return 1;
-}
-#endif
diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig
deleted file mode 100644
index e1128e5d6ade..000000000000
--- a/configs/usbarmory_defconfig
+++ /dev/null
@@ -1,26 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX5=y
-CONFIG_SYS_TEXT_BASE=0x77800000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_MEMTEST_START=0x70000000
-CONFIG_SYS_MEMTEST_END=0x90000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_TARGET_USBARMORY=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_FUSE=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_ESDHC_IMX=y
-CONFIG_MTD=y
-CONFIG_MXC_UART=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_MX5=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h
deleted file mode 100644
index 27053c067fca..000000000000
--- a/include/configs/usbarmory.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * USB armory MkI board configuration settings
- * http://inversepath.com/usbarmory
- *
- * Copyright (C) 2015, Inverse Path
- * Andrej Rosano <andrej at inversepath.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_FSL_CLK
-
-#include <asm/arch/imx-regs.h>
-
-/* U-Boot environment */
-
-/* U-Boot general configurations */
-#define CONFIG_SYS_CBSIZE 512
-
-/* UART */
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* SD/MMC */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-
-/* USB */
-#define CONFIG_MXC_USB_PORT 1
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-
-/* Fuse */
-#define CONFIG_FSL_IIM
-
-/* U-Boot memory offsets */
-#define CONFIG_LOADADDR 0x72000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Linux boot */
-#define CONFIG_HOSTNAME "usbarmory"
-#define CONFIG_BOOTCOMMAND \
- "run distro_bootcmd; " \
- "setenv bootargs console=${console} ${bootargs_default}; " \
- "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \
- "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
- "bootz ${kernel_addr_r} - ${fdt_addr_r}"
-
-#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
-
-#include <config_distro_bootcmd.h>
-
-#define MEM_LAYOUT_ENV_SETTINGS \
- "kernel_addr_r=0x70800000\0" \
- "fdt_addr_r=0x71000000\0" \
- "scriptaddr=0x70800000\0" \
- "pxefile_addr_r=0x70800000\0" \
- "ramdisk_addr_r=0x73000000\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- MEM_LAYOUT_ENV_SETTINGS \
- "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
- "fdtfile=imx53-usbarmory.dtb\0" \
- "console=ttymxc0,115200\0" \
- BOOTENV
-
-#ifndef CONFIG_CMDLINE
-#define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
-#define USBARMORY_FIT_ADDR "0x70800000"
-#endif
-
-/* Physical Memory Map */
-#define PHYS_SDRAM CSD0_BASE_ADDR
-#define PHYS_SDRAM_SIZE (gd->ram_size)
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-
-#endif /* __CONFIG_H */
--
2.17.1
More information about the U-Boot
mailing list