[PATCH 44/57] ppc: Remove T2081QDS board and ARCH_T2081 support

Chris Packham judge.packham at gmail.com
Sun Feb 21 07:46:57 CET 2021


On Sun, 21 Feb 2021, 2:16 PM Tom Rini, <trini at konsulko.com> wrote:

> This board has not been converted to CONFIG_DM_MMC by the deadline.
> Remove it.  It is also the only ARCH_T2081 board so remove that support
> as well.
>
> Cc: Shengzhou Liu <Shengzhou.Liu at nxp.com>
> Cc: Ruchika Gupta <ruchika.gupta at nxp.com>
> Signed-off-by: Tom Rini <trini at konsulko.com>
>

Does this impact the T2080? I don't see anything obvious in this series
(but gmail doesn't do threading well so I could have missed it). I've got a
T2080RDB I'd be keen to keep in a working state.

---
>  arch/powerpc/cpu/mpc85xx/Kconfig          |  36 +-------
>  arch/powerpc/cpu/mpc85xx/Makefile         |   2 -
>  arch/powerpc/cpu/mpc85xx/speed.c          |   4 +-
>  arch/powerpc/cpu/mpc85xx/t2080_serdes.c   |   4 -
>  arch/powerpc/include/asm/config_mpc85xx.h |   5 +-
>  arch/powerpc/include/asm/immap_85xx.h     |   4 +-
>  board/freescale/t208xqds/Kconfig          |   2 +-
>  board/freescale/t208xqds/Makefile         |   1 -
>  board/freescale/t208xqds/eth_t208xqds.c   | 106 ----------------------
>  board/freescale/t208xqds/t208xqds.c       |  70 --------------
>  configs/T2081QDS_NAND_defconfig           |  78 ----------------
>  configs/T2081QDS_SDCARD_defconfig         |  75 ---------------
>  configs/T2081QDS_SPIFLASH_defconfig       |  77 ----------------
>  configs/T2081QDS_SRIO_PCIE_BOOT_defconfig |  54 -----------
>  configs/T2081QDS_defconfig                |  62 -------------
>  drivers/net/Kconfig                       |   1 -
>  drivers/net/fm/Makefile                   |   1 -
>  include/configs/T208xQDS.h                |   7 --
>  18 files changed, 7 insertions(+), 582 deletions(-)
>  delete mode 100644 configs/T2081QDS_NAND_defconfig
>  delete mode 100644 configs/T2081QDS_SDCARD_defconfig
>  delete mode 100644 configs/T2081QDS_SPIFLASH_defconfig
>  delete mode 100644 configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
>  delete mode 100644 configs/T2081QDS_defconfig
>
> diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig
> b/arch/powerpc/cpu/mpc85xx/Kconfig
> index 565b311f39ac..3a787919f306 100644
> --- a/arch/powerpc/cpu/mpc85xx/Kconfig
> +++ b/arch/powerpc/cpu/mpc85xx/Kconfig
> @@ -193,14 +193,6 @@ config TARGET_T2080RDB
>         imply CMD_SATA
>         imply PANIC_HANG
>
> -config TARGET_T2081QDS
> -       bool "Support T2081QDS"
> -       select ARCH_T2081
> -       select SUPPORT_SPL
> -       select PHYS_64BIT
> -       select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
> -       select FSL_DDR_INTERACTIVE
> -
>  config TARGET_T4160RDB
>         bool "Support T4160RDB"
>         select ARCH_T4160
> @@ -924,29 +916,6 @@ config ARCH_T2080
>         imply CMD_REGINFO
>         imply FSL_SATA
>
> -config ARCH_T2081
> -       bool
> -       select E500MC
> -       select E6500
> -       select FSL_LAW
> -       select SYS_FSL_DDR_VER_47
> -       select SYS_FSL_ERRATUM_A006379
> -       select SYS_FSL_ERRATUM_A006593
> -       select SYS_FSL_ERRATUM_A007186
> -       select SYS_FSL_ERRATUM_A007212
> -       select SYS_FSL_ERRATUM_A009942
> -       select SYS_FSL_ERRATUM_ESDHC111
> -       select FSL_PCIE_RESET
> -       select SYS_FSL_HAS_DDR3
> -       select SYS_FSL_HAS_SEC
> -       select SYS_FSL_QORIQ_CHASSIS2
> -       select SYS_FSL_SEC_BE
> -       select SYS_FSL_SEC_COMPAT_4
> -       select SYS_PPC64
> -       select FSL_IFC
> -       imply CMD_NAND
> -       imply CMD_REGINFO
> -
>  config ARCH_T4160
>         bool
>         select E500MC
> @@ -1048,8 +1017,7 @@ config MAX_CPUS
>                      ARCH_P5040 || \
>                      ARCH_T1040 || \
>                      ARCH_T1042 || \
> -                    ARCH_T2080 || \
> -                    ARCH_T2081
> +                    ARCH_T2080
>         default 2 if ARCH_B4420 || \
>                      ARCH_BSC9132 || \
>                      ARCH_MPC8572 || \
> @@ -1107,7 +1075,6 @@ config SYS_CCSRBAR_DEFAULT
>                                 ARCH_T1040      || \
>                                 ARCH_T1042      || \
>                                 ARCH_T2080      || \
> -                               ARCH_T2081      || \
>                                 ARCH_T4160      || \
>                                 ARCH_T4240
>         default 0xe0000000 if ARCH_QEMU_E500
> @@ -1294,7 +1261,6 @@ config SYS_FSL_NUM_LAWS
>                         ARCH_P5020      || \
>                         ARCH_P5040      || \
>                         ARCH_T2080      || \
> -                       ARCH_T2081      || \
>                         ARCH_T4160      || \
>                         ARCH_T4240
>         default 16 if   ARCH_T1023      || \
> diff --git a/arch/powerpc/cpu/mpc85xx/Makefile
> b/arch/powerpc/cpu/mpc85xx/Makefile
> index 019fce631425..5bfa9904adda 100644
> --- a/arch/powerpc/cpu/mpc85xx/Makefile
> +++ b/arch/powerpc/cpu/mpc85xx/Makefile
> @@ -51,7 +51,6 @@ obj-$(CONFIG_ARCH_T1042)      += t1040_ids.o
>  obj-$(CONFIG_ARCH_T1023) += t1024_ids.o
>  obj-$(CONFIG_ARCH_T1024) += t1024_ids.o
>  obj-$(CONFIG_ARCH_T2080) += t2080_ids.o
> -obj-$(CONFIG_ARCH_T2081) += t2080_ids.o
>
>
>  obj-$(CONFIG_QE)       += qe_io.o
> @@ -91,7 +90,6 @@ obj-$(CONFIG_ARCH_T1042)      += t1040_serdes.o
>  obj-$(CONFIG_ARCH_T1023) += t1024_serdes.o
>  obj-$(CONFIG_ARCH_T1024) += t1024_serdes.o
>  obj-$(CONFIG_ARCH_T2080) += t2080_serdes.o
> -obj-$(CONFIG_ARCH_T2081) += t2080_serdes.o
>
>  obj-y  += cpu.o
>  obj-y  += cpu_init.o
> diff --git a/arch/powerpc/cpu/mpc85xx/speed.c
> b/arch/powerpc/cpu/mpc85xx/speed.c
> index 09653c70125f..09cdc5e06089 100644
> --- a/arch/powerpc/cpu/mpc85xx/speed.c
> +++ b/arch/powerpc/cpu/mpc85xx/speed.c
> @@ -127,7 +127,7 @@ void get_sys_info(sys_info_t *sys_info)
>          * T2080 rev 1.1 and later also use half mem_pll comparing with
> rev 1.0
>          */
>  #if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) || \
> -       defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
> +       defined(CONFIG_ARCH_T2080)
>         svr = get_svr();
>         switch (SVR_SOC_VER(svr)) {
>         case SVR_T4240:
> @@ -198,7 +198,7 @@ void get_sys_info(sys_info_t *sys_info)
>  #endif
>
>  #if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
> -       defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
> +       defined(CONFIG_ARCH_T2080)
>  #define FM1_CLK_SEL    0xe0000000
>  #define FM1_CLK_SHIFT  29
>  #elif defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
> diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
> b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
> index 32cfcc0242bb..5f34aab4531e 100644
> --- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
> +++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
> @@ -160,7 +160,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
>         {}
>  };
>
> -#ifndef CONFIG_ARCH_T2081
>  static const struct serdes_config serdes2_cfg_tbl[] = {
>         /* SerDes 2 */
>         {0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
> @@ -176,13 +175,10 @@ static const struct serdes_config serdes2_cfg_tbl[]
> = {
>         {0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2}
> },
>         {}
>  };
> -#endif
>
>  static const struct serdes_config *serdes_cfg_tbl[] = {
>         serdes1_cfg_tbl,
> -#ifndef CONFIG_ARCH_T2081
>         serdes2_cfg_tbl,
> -#endif
>  };
>
>  enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h
> b/arch/powerpc/include/asm/config_mpc85xx.h
> index f25ba1af0928..f4f1c2eed100 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -374,7 +374,7 @@
>  #define QE_NUM_OF_SNUM                 28
>  #define CONFIG_SYS_FSL_SFP_VER_3_0
>
> -#elif defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
> +#elif defined(CONFIG_ARCH_T2080)
>  #define CONFIG_FSL_CORENET             /* Freescale CoreNet platform */
>  #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
>  #define CONFIG_SYS_FSL_NUM_CC_PLLS     2
> @@ -391,9 +391,6 @@
>  #define CONFIG_SYS_FSL_SRIO_MAX_PORTS  2
>  #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
>  #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
> -#elif defined(CONFIG_ARCH_T2081)
> -#define CONFIG_SYS_NUM_FM1_DTSEC       6
> -#define CONFIG_SYS_NUM_FM1_10GEC       2
>  #endif
>  #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
>  #define CONFIG_PME_PLAT_CLK_DIV                1
> diff --git a/arch/powerpc/include/asm/immap_85xx.h
> b/arch/powerpc/include/asm/immap_85xx.h
> index bfa601e91b6b..59c70c5ce1d6 100644
> --- a/arch/powerpc/include/asm/immap_85xx.h
> +++ b/arch/powerpc/include/asm/immap_85xx.h
> @@ -1807,7 +1807,7 @@ typedef struct ccsr_gur {
>  #define PXCKEN_MASK                            0x80000000
>  #define PXCK_MASK                              0x00FF0000
>  #define PXCK_BITS_START                                16
> -#elif defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
> +#elif defined(CONFIG_ARCH_T2080)
>  #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL                0xff000000
>  #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT  24
>  #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL                0x00ff0000
> @@ -1879,7 +1879,7 @@ typedef struct ccsr_gur {
>  #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII       0x08000000
>  #define FSL_CORENET_RCWSR13_EC2_FM1_GPIO               0x10000000
>  #endif
> -#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
> +#if defined(CONFIG_ARCH_T2080)
>  #define FSL_CORENET_RCWSR13_EC1                        0x60000000 /* bits
> 417..418 */
>  #define FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII   0x00000000
>  #define FSL_CORENET_RCWSR13_EC1_GPIO           0x40000000
> diff --git a/board/freescale/t208xqds/Kconfig
> b/board/freescale/t208xqds/Kconfig
> index 5a435c2695b6..f65d8eed542f 100644
> --- a/board/freescale/t208xqds/Kconfig
> +++ b/board/freescale/t208xqds/Kconfig
> @@ -1,4 +1,4 @@
> -if TARGET_T2080QDS || TARGET_T2081QDS
> +if TARGET_T2080QDS
>
>  config SYS_BOARD
>         default "t208xqds"
> diff --git a/board/freescale/t208xqds/Makefile
> b/board/freescale/t208xqds/Makefile
> index 587903a62321..55b1e7390a0c 100644
> --- a/board/freescale/t208xqds/Makefile
> +++ b/board/freescale/t208xqds/Makefile
> @@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD
>  obj-y += spl.o
>  else
>  obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o
> -obj-$(CONFIG_TARGET_T2081QDS) += t208xqds.o eth_t208xqds.o
>  obj-$(CONFIG_PCI)      += pci.o
>  endif
>
> diff --git a/board/freescale/t208xqds/eth_t208xqds.c
> b/board/freescale/t208xqds/eth_t208xqds.c
> index aaa3490aaa2a..705387af3c31 100644
> --- a/board/freescale/t208xqds/eth_t208xqds.c
> +++ b/board/freescale/t208xqds/eth_t208xqds.c
> @@ -42,13 +42,6 @@
>  #define EMI1_SLOT4     4
>  #define EMI1_SLOT5     5
>  #define EMI2            7
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -#define EMI1_SLOT2      3
> -#define EMI1_SLOT3      4
> -#define EMI1_SLOT5      5
> -#define EMI1_SLOT6      6
> -#define EMI1_SLOT7      7
> -#define EMI2           8
>  #endif
>
>  #define PCCR1_SGMIIA_KX_MASK           0x00008000
> @@ -72,24 +65,12 @@ static const char * const mdio_names[] = {
>         "T2080QDS_MDIO_SLOT5",
>         "T2080QDS_MDIO_SLOT2",
>         "T2080QDS_MDIO_10GC",
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -       "T2081QDS_MDIO_RGMII1",
> -       "T2081QDS_MDIO_RGMII2",
> -       "T2081QDS_MDIO_SLOT1",
> -       "T2081QDS_MDIO_SLOT2",
> -       "T2081QDS_MDIO_SLOT3",
> -       "T2081QDS_MDIO_SLOT5",
> -       "T2081QDS_MDIO_SLOT6",
> -       "T2081QDS_MDIO_SLOT7",
> -       "T2081QDS_MDIO_10GC",
>  #endif
>  };
>
>  /* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
>  #if defined(CONFIG_TARGET_T2080QDS)
>  static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
>  #endif
>
>  static const char *t208xqds_mdio_name_for_muxval(u8 muxval)
> @@ -316,35 +297,6 @@ void board_ft_fman_fixup_port(void *fdt, char
> *compat, phys_addr_t addr,
>                                 fdt_status_okay_by_alias(fdt,
> "emi1_slot2");
>                         }
>                         break;
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -               case FM1_DTSEC1:
> -               case FM1_DTSEC2:
> -               case FM1_DTSEC5:
> -               case FM1_DTSEC6:
> -               case FM1_DTSEC9:
> -               case FM1_DTSEC10:
> -                       if (mdio_mux[port] == EMI1_SLOT2) {
> -                               sprintf(alias, "phy_sgmii_s2_%x", phy);
> -                               fdt_set_phy_handle(fdt, compat, addr,
> alias);
> -                               fdt_status_okay_by_alias(fdt,
> "emi1_slot2");
> -                       } else if (mdio_mux[port] == EMI1_SLOT3) {
> -                               sprintf(alias, "phy_sgmii_s3_%x", phy);
> -                               fdt_set_phy_handle(fdt, compat, addr,
> alias);
> -                               fdt_status_okay_by_alias(fdt,
> "emi1_slot3");
> -                       } else if (mdio_mux[port] == EMI1_SLOT5) {
> -                               sprintf(alias, "phy_sgmii_s5_%x", phy);
> -                               fdt_set_phy_handle(fdt, compat, addr,
> alias);
> -                               fdt_status_okay_by_alias(fdt,
> "emi1_slot5");
> -                       } else if (mdio_mux[port] == EMI1_SLOT6) {
> -                               sprintf(alias, "phy_sgmii_s6_%x", phy);
> -                               fdt_set_phy_handle(fdt, compat, addr,
> alias);
> -                               fdt_status_okay_by_alias(fdt,
> "emi1_slot6");
> -                       } else if (mdio_mux[port] == EMI1_SLOT7) {
> -                               sprintf(alias, "phy_sgmii_s7_%x", phy);
> -                               fdt_set_phy_handle(fdt, compat, addr,
> alias);
> -                               fdt_status_okay_by_alias(fdt,
> "emi1_slot7");
> -                       }
> -                       break;
>  #endif
>                 default:
>                         break;
> @@ -495,30 +447,6 @@ static void initialize_lane_to_slot(void)
>                 lane_to_slot[6] = 3;
>                 lane_to_slot[7] = 3;
>                 break;
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -       case 0x6b:
> -               lane_to_slot[4] = 1;
> -               lane_to_slot[5] = 3;
> -               lane_to_slot[6] = 3;
> -               lane_to_slot[7] = 3;
> -               break;
> -       case 0xca:
> -       case 0xcb:
> -               lane_to_slot[1] = 7;
> -               lane_to_slot[2] = 6;
> -               lane_to_slot[3] = 5;
> -               lane_to_slot[5] = 3;
> -               lane_to_slot[6] = 3;
> -               lane_to_slot[7] = 3;
> -               break;
> -       case 0xf2:
> -               lane_to_slot[1] = 7;
> -               lane_to_slot[2] = 7;
> -               lane_to_slot[3] = 7;
> -               lane_to_slot[5] = 4;
> -               lane_to_slot[6] = 3;
> -               lane_to_slot[7] = 7;
> -               break;
>  #endif
>         default:
>                 break;
> @@ -570,10 +498,6 @@ int board_eth_init(struct bd_info *bis)
>         t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
>  #endif
>         t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
> -#if defined(CONFIG_TARGET_T2081QDS)
> -       t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
> -       t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
> -#endif
>         t208xqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
>
>         /* Set the two on-board RGMII PHY address */
> @@ -689,19 +613,6 @@ int board_eth_init(struct bd_info *bis)
>                 fm_info_set_phy_address(FM1_DTSEC5,
> SGMII_CARD_PORT3_PHY_ADDR);
>                 fm_info_set_phy_address(FM1_DTSEC6,
> SGMII_CARD_PORT2_PHY_ADDR);
>                 break;
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -       case 0xca:
> -       case 0xcb:
> -               /* SGMII in Slot3 */
> -               fm_info_set_phy_address(FM1_DTSEC5,
> SGMII_CARD_PORT1_PHY_ADDR);
> -               fm_info_set_phy_address(FM1_DTSEC6,
> SGMII_CARD_PORT2_PHY_ADDR);
> -               /* SGMII in Slot5 */
> -               fm_info_set_phy_address(FM1_DTSEC2,
> SGMII_CARD_PORT1_PHY_ADDR);
> -               /* SGMII in Slot6 */
> -               fm_info_set_phy_address(FM1_DTSEC1,
> SGMII_CARD_PORT1_PHY_ADDR);
> -               /* SGMII in Slot7 */
> -               fm_info_set_phy_address(FM1_DTSEC10,
> SGMII_CARD_PORT3_PHY_ADDR);
> -               break;
>  #endif
>         case 0xf2:
>                 /* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot7 */
> @@ -745,23 +656,6 @@ int board_eth_init(struct bd_info *bis)
>                                 fm_info_set_mdio(i, mii_dev_for_muxval(
>                                                  mdio_mux[i]));
>                                 break;
> -#if defined(CONFIG_TARGET_T2081QDS)
> -                       case 5:
> -                               mdio_mux[i] = EMI1_SLOT5;
> -                               fm_info_set_mdio(i, mii_dev_for_muxval(
> -                                                mdio_mux[i]));
> -                               break;
> -                       case 6:
> -                               mdio_mux[i] = EMI1_SLOT6;
> -                               fm_info_set_mdio(i, mii_dev_for_muxval(
> -                                                mdio_mux[i]));
> -                               break;
> -                       case 7:
> -                               mdio_mux[i] = EMI1_SLOT7;
> -                               fm_info_set_mdio(i, mii_dev_for_muxval(
> -                                                mdio_mux[i]));
> -                               break;
> -#endif
>                         }
>                         break;
>                 case PHY_INTERFACE_MODE_RGMII:
> diff --git a/board/freescale/t208xqds/t208xqds.c
> b/board/freescale/t208xqds/t208xqds.c
> index dedf722c6957..51e0a20b238a 100644
> --- a/board/freescale/t208xqds/t208xqds.c
> +++ b/board/freescale/t208xqds/t208xqds.c
> @@ -209,76 +209,6 @@ int brd_mux_lane_to_slot(void)
>                  */
>                  QIXIS_WRITE(brdcfg[12], 0x1a);
>                  break;
> -#elif defined(CONFIG_TARGET_T2081QDS)
> -       case 0x50:
> -       case 0x51:
> -               /* SD1(A:D) => SLOT2 XAUI
> -                * SD1(E)   => SLOT1 PCIe4 x1
> -                * SD1(F:H) => SLOT3 SGMII
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0x98);
> -               QIXIS_WRITE(brdcfg[13], 0x70);
> -               break;
> -       case 0x6a:
> -       case 0x6b:
> -               /* SD1(A:D) => XFI SFP Module
> -                * SD1(E)   => SLOT1 PCIe4 x1
> -                * SD1(F:H) => SLOT3 SGMII
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0x80);
> -               QIXIS_WRITE(brdcfg[13], 0x70);
> -               break;
> -       case 0x6c:
> -       case 0x6d:
> -               /* SD1(A:B) => XFI SFP Module
> -                * SD1(C:D) => SLOT2 SGMII
> -                * SD1(E:H) => SLOT1 PCIe4 x4
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0xe8);
> -               QIXIS_WRITE(brdcfg[13], 0x0);
> -               break;
> -       case 0xaa:
> -       case 0xab:
> -               /* SD1(A:D) => SLOT2 PCIe3 x4
> -                * SD1(F:H) => SLOT1 SGMI4 x4
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0xf8);
> -               QIXIS_WRITE(brdcfg[13], 0x0);
> -               break;
> -       case 0xca:
> -       case 0xcb:
> -               /* SD1(A)   => SLOT2 PCIe3 x1
> -                * SD1(B)   => SLOT7 SGMII
> -                * SD1(C)   => SLOT6 SGMII
> -                * SD1(D)   => SLOT5 SGMII
> -                * SD1(E)   => SLOT1 PCIe4 x1
> -                * SD1(F:H) => SLOT3 SGMII
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0x80);
> -               QIXIS_WRITE(brdcfg[13], 0x70);
> -               break;
> -       case 0xde:
> -       case 0xdf:
> -               /* SD1(A:D) => SLOT2 PCIe3 x4
> -                * SD1(E)   => SLOT1 PCIe4 x1
> -                * SD1(F)   => SLOT4 PCIe1 x1
> -                * SD1(G)   => SLOT3 PCIe2 x1
> -                * SD1(H)   => SLOT7 SGMII
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0x98);
> -               QIXIS_WRITE(brdcfg[13], 0x25);
> -               break;
> -       case 0xf2:
> -               /* SD1(A)   => SLOT2 PCIe3 x1
> -                * SD1(B:D) => SLOT7 SGMII
> -                * SD1(E)   => SLOT1 PCIe4 x1
> -                * SD1(F)   => SLOT4 PCIe1 x1
> -                * SD1(G)   => SLOT3 PCIe2 x1
> -                * SD1(H)   => SLOT7 SGMII
> -                */
> -               QIXIS_WRITE(brdcfg[12], 0x81);
> -               QIXIS_WRITE(brdcfg[13], 0xa5);
> -               break;
>  #endif
>         default:
>                 printf("WARNING: unsupported for SerDes1 Protocol %d\n",
> diff --git a/configs/T2081QDS_NAND_defconfig
> b/configs/T2081QDS_NAND_defconfig
> deleted file mode 100644
> index b98e7e0653e2..000000000000
> --- a/configs/T2081QDS_NAND_defconfig
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -CONFIG_PPC=y
> -CONFIG_SYS_TEXT_BASE=0x00201000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> -CONFIG_ENV_SIZE=0x2000
> -CONFIG_ENV_OFFSET=0x140000
> -CONFIG_SPL_TEXT_BASE=0xFFFD8000
> -CONFIG_SPL_SERIAL_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> -CONFIG_SPL=y
> -CONFIG_MPC85xx=y
> -CONFIG_TARGET_T2081QDS=y
> -CONFIG_SYS_CUSTOM_LDSCRIPT=y
> -CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
> -CONFIG_FIT=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_OF_BOARD_SETUP=y
> -CONFIG_OF_STDOUT_VIA_ALIAS=y
> -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
> -CONFIG_BOOTDELAY=10
> -CONFIG_BOARD_EARLY_INIT_R=y
> -# CONFIG_SPL_FRAMEWORK is not set
> -CONFIG_SPL_NAND_BOOT=y
> -CONFIG_SPL_FSL_PBL=y
> -CONFIG_SPL_ENV_SUPPORT=y
> -CONFIG_SPL_I2C_SUPPORT=y
> -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
> -CONFIG_SPL_NAND_SUPPORT=y
> -CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_IMLS=y
> -CONFIG_CMD_GREPENV=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SF=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_MP=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_MTDPARTS=y
>
> -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
>
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_NAND=y
> -CONFIG_FSL_CAAM=y
> -CONFIG_FSL_ESDHC=y
> -CONFIG_MTD=y
> -CONFIG_MTD_NOR_FLASH=y
> -CONFIG_FLASH_CFI_DRIVER=y
> -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
> -CONFIG_FLASH_CFI_MTD=y
> -CONFIG_SYS_FLASH_CFI=y
> -CONFIG_MTD_RAW_NAND=y
> -CONFIG_SPI_FLASH=y
> -CONFIG_SF_DEFAULT_MODE=0
> -CONFIG_SF_DEFAULT_SPEED=10000000
> -CONFIG_SPI_FLASH_EON=y
> -CONFIG_SPI_FLASH_STMICRO=y
> -CONFIG_SPI_FLASH_SST=y
> -CONFIG_PHYLIB=y
> -CONFIG_PHY_AQUANTIA=y
> -CONFIG_PHY_REALTEK=y
> -CONFIG_PHY_TERANETICS=y
> -CONFIG_PHY_VITESSE=y
> -CONFIG_E1000=y
> -CONFIG_FMAN_ENET=y
> -CONFIG_MII=y
> -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_FSL_ESPI=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_ADDR_MAP=y
> -CONFIG_SYS_NUM_ADDR_MAP=64
> -CONFIG_OF_LIBFDT=y
> diff --git a/configs/T2081QDS_SDCARD_defconfig
> b/configs/T2081QDS_SDCARD_defconfig
> deleted file mode 100644
> index 8244f38ad2ce..000000000000
> --- a/configs/T2081QDS_SDCARD_defconfig
> +++ /dev/null
> @@ -1,75 +0,0 @@
> -CONFIG_PPC=y
> -CONFIG_SYS_TEXT_BASE=0x00201000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> -CONFIG_ENV_SIZE=0x2000
> -CONFIG_ENV_OFFSET=0x100000
> -CONFIG_SPL_TEXT_BASE=0xFFFD8000
> -CONFIG_SPL_MMC_SUPPORT=y
> -CONFIG_SPL_SERIAL_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> -CONFIG_SPL=y
> -CONFIG_MPC85xx=y
> -CONFIG_TARGET_T2081QDS=y
> -CONFIG_FIT=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_OF_BOARD_SETUP=y
> -CONFIG_OF_STDOUT_VIA_ALIAS=y
> -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
> -CONFIG_BOOTDELAY=10
> -CONFIG_BOARD_EARLY_INIT_R=y
> -# CONFIG_SPL_FRAMEWORK is not set
> -CONFIG_SPL_MMC_BOOT=y
> -CONFIG_SPL_FSL_PBL=y
> -CONFIG_SPL_ENV_SUPPORT=y
> -CONFIG_SPL_I2C_SUPPORT=y
> -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
> -CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_IMLS=y
> -CONFIG_CMD_GREPENV=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SF=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_MP=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_MTDPARTS=y
>
> -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
>
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_MMC=y
> -CONFIG_FSL_CAAM=y
> -CONFIG_FSL_ESDHC=y
> -CONFIG_MTD=y
> -CONFIG_MTD_NOR_FLASH=y
> -CONFIG_FLASH_CFI_DRIVER=y
> -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
> -CONFIG_FLASH_CFI_MTD=y
> -CONFIG_SYS_FLASH_CFI=y
> -CONFIG_SPI_FLASH=y
> -CONFIG_SF_DEFAULT_MODE=0
> -CONFIG_SF_DEFAULT_SPEED=10000000
> -CONFIG_SPI_FLASH_EON=y
> -CONFIG_SPI_FLASH_STMICRO=y
> -CONFIG_SPI_FLASH_SST=y
> -CONFIG_PHYLIB=y
> -CONFIG_PHY_AQUANTIA=y
> -CONFIG_PHY_REALTEK=y
> -CONFIG_PHY_TERANETICS=y
> -CONFIG_PHY_VITESSE=y
> -CONFIG_E1000=y
> -CONFIG_FMAN_ENET=y
> -CONFIG_MII=y
> -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_FSL_ESPI=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_ADDR_MAP=y
> -CONFIG_SYS_NUM_ADDR_MAP=64
> -CONFIG_OF_LIBFDT=y
> diff --git a/configs/T2081QDS_SPIFLASH_defconfig
> b/configs/T2081QDS_SPIFLASH_defconfig
> deleted file mode 100644
> index 903281d767bd..000000000000
> --- a/configs/T2081QDS_SPIFLASH_defconfig
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -CONFIG_PPC=y
> -CONFIG_SYS_TEXT_BASE=0x00201000
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> -CONFIG_ENV_SIZE=0x2000
> -CONFIG_ENV_OFFSET=0x100000
> -CONFIG_ENV_SECT_SIZE=0x10000
> -CONFIG_SPL_TEXT_BASE=0xFFFD8000
> -CONFIG_SPL_SERIAL_SUPPORT=y
> -CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
> -CONFIG_SPL=y
> -CONFIG_SPL_SPI_FLASH_SUPPORT=y
> -CONFIG_SPL_SPI_SUPPORT=y
> -CONFIG_MPC85xx=y
> -CONFIG_TARGET_T2081QDS=y
> -CONFIG_FIT=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_OF_BOARD_SETUP=y
> -CONFIG_OF_STDOUT_VIA_ALIAS=y
> -CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
> -CONFIG_BOOTDELAY=10
> -CONFIG_BOARD_EARLY_INIT_R=y
> -# CONFIG_SPL_FRAMEWORK is not set
> -CONFIG_SPL_SPI_BOOT=y
> -CONFIG_SPL_FSL_PBL=y
> -CONFIG_SPL_ENV_SUPPORT=y
> -CONFIG_SPL_I2C_SUPPORT=y
> -CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
> -CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_IMLS=y
> -CONFIG_CMD_GREPENV=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SF=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_MP=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_MTDPARTS=y
>
> -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
>
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_SPI_FLASH=y
> -CONFIG_FSL_CAAM=y
> -CONFIG_FSL_ESDHC=y
> -CONFIG_MTD=y
> -CONFIG_MTD_NOR_FLASH=y
> -CONFIG_FLASH_CFI_DRIVER=y
> -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
> -CONFIG_FLASH_CFI_MTD=y
> -CONFIG_SYS_FLASH_CFI=y
> -CONFIG_SPI_FLASH=y
> -CONFIG_SF_DEFAULT_MODE=0
> -CONFIG_SF_DEFAULT_SPEED=10000000
> -CONFIG_SPI_FLASH_EON=y
> -CONFIG_SPI_FLASH_STMICRO=y
> -CONFIG_SPI_FLASH_SST=y
> -CONFIG_PHYLIB=y
> -CONFIG_PHY_AQUANTIA=y
> -CONFIG_PHY_REALTEK=y
> -CONFIG_PHY_TERANETICS=y
> -CONFIG_PHY_VITESSE=y
> -CONFIG_E1000=y
> -CONFIG_FMAN_ENET=y
> -CONFIG_MII=y
> -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_FSL_ESPI=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_ADDR_MAP=y
> -CONFIG_SYS_NUM_ADDR_MAP=64
> -CONFIG_OF_LIBFDT=y
> diff --git a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
> b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
> deleted file mode 100644
> index 30b7bac8380b..000000000000
> --- a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -CONFIG_PPC=y
> -CONFIG_SYS_TEXT_BASE=0xFFF40000
> -CONFIG_ENV_SIZE=0x2000
> -CONFIG_MPC85xx=y
> -CONFIG_TARGET_T2081QDS=y
> -CONFIG_FIT=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_OF_BOARD_SETUP=y
> -CONFIG_OF_STDOUT_VIA_ALIAS=y
> -CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE"
> -CONFIG_BOOTDELAY=10
> -CONFIG_BOARD_EARLY_INIT_R=y
> -CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_GREPENV=y
> -# CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SF=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_MP=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_REMOTE=y
> -CONFIG_ENV_ADDR=0xFFE20000
> -CONFIG_FSL_CAAM=y
> -CONFIG_FSL_ESDHC=y
> -CONFIG_MTD=y
> -CONFIG_SPI_FLASH=y
> -CONFIG_SF_DEFAULT_MODE=0
> -CONFIG_SF_DEFAULT_SPEED=10000000
> -CONFIG_SPI_FLASH_EON=y
> -CONFIG_SPI_FLASH_STMICRO=y
> -CONFIG_SPI_FLASH_SST=y
> -CONFIG_PHYLIB=y
> -CONFIG_PHY_AQUANTIA=y
> -CONFIG_PHY_REALTEK=y
> -CONFIG_PHY_TERANETICS=y
> -CONFIG_PHY_VITESSE=y
> -CONFIG_E1000=y
> -CONFIG_FMAN_ENET=y
> -CONFIG_MII=y
> -CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_FSL_ESPI=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_ADDR_MAP=y
> -CONFIG_SYS_NUM_ADDR_MAP=64
> -CONFIG_OF_LIBFDT=y
> diff --git a/configs/T2081QDS_defconfig b/configs/T2081QDS_defconfig
> deleted file mode 100644
> index 682d78c00071..000000000000
> --- a/configs/T2081QDS_defconfig
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -CONFIG_PPC=y
> -CONFIG_SYS_TEXT_BASE=0xEFF40000
> -CONFIG_ENV_SIZE=0x2000
> -CONFIG_ENV_SECT_SIZE=0x20000
> -CONFIG_MPC85xx=y
> -CONFIG_TARGET_T2081QDS=y
> -CONFIG_FIT=y
> -CONFIG_FIT_VERBOSE=y
> -CONFIG_OF_BOARD_SETUP=y
> -CONFIG_OF_STDOUT_VIA_ALIAS=y
> -CONFIG_BOOTDELAY=10
> -CONFIG_BOARD_EARLY_INIT_R=y
> -CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_IMLS=y
> -CONFIG_CMD_GREPENV=y
> -CONFIG_CMD_I2C=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_SF=y
> -CONFIG_CMD_USB=y
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_MP=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_MTDPARTS=y
>
> -CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
>
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_FLASH=y
> -CONFIG_ENV_ADDR=0xEFF20000
> -CONFIG_FSL_CAAM=y
> -CONFIG_FSL_ESDHC=y
> -CONFIG_MTD=y
> -CONFIG_MTD_NOR_FLASH=y
> -CONFIG_FLASH_CFI_DRIVER=y
> -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
> -CONFIG_FLASH_CFI_MTD=y
> -CONFIG_SYS_FLASH_CFI=y
> -CONFIG_SPI_FLASH=y
> -CONFIG_SF_DEFAULT_MODE=0
> -CONFIG_SF_DEFAULT_SPEED=10000000
> -CONFIG_SPI_FLASH_EON=y
> -CONFIG_SPI_FLASH_STMICRO=y
> -CONFIG_SPI_FLASH_SST=y
> -CONFIG_PHYLIB=y
> -CONFIG_PHY_AQUANTIA=y
> -CONFIG_PHY_REALTEK=y
> -CONFIG_PHY_TERANETICS=y
> -CONFIG_PHY_VITESSE=y
> -CONFIG_E1000=y
> -CONFIG_FMAN_ENET=y
> -CONFIG_MII=y
> -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
> -CONFIG_SYS_NS16550=y
> -CONFIG_SPI=y
> -CONFIG_FSL_ESPI=y
> -CONFIG_USB=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_ADDR_MAP=y
> -CONFIG_SYS_NUM_ADDR_MAP=64
> -CONFIG_OF_LIBFDT=y
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index 0e84c22b5075..5c195e6e1645 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -713,7 +713,6 @@ config SYS_DPAA_QBMAN
>                      ARCH_T1040 || \
>                      ARCH_T1042 || \
>                      ARCH_T2080 || \
> -                    ARCH_T2081 || \
>                      ARCH_T4240 || \
>                      ARCH_T4160 || \
>                      ARCH_P4080 || \
> diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
> index e10db710e6e3..c6c1440a2006 100644
> --- a/drivers/net/fm/Makefile
> +++ b/drivers/net/fm/Makefile
> @@ -27,7 +27,6 @@ obj-$(CONFIG_ARCH_T1042)      += t1040.o
>  obj-$(CONFIG_ARCH_T1023) += t1024.o
>  obj-$(CONFIG_ARCH_T1024) += t1024.o
>  obj-$(CONFIG_ARCH_T2080) += t2080.o
> -obj-$(CONFIG_ARCH_T2081) += t2080.o
>  obj-$(CONFIG_ARCH_T4240) += t4240.o
>  obj-$(CONFIG_ARCH_T4160) += t4240.o
>  obj-$(CONFIG_ARCH_B4420) += b4860.o
> diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
> index 1735b170fd26..271b36d86f1e 100644
> --- a/include/configs/T208xQDS.h
> +++ b/include/configs/T208xQDS.h
> @@ -19,7 +19,6 @@
>  #define CONFIG_SYS_SRIO                /* Enable Serial RapidIO Support */
>  #define CONFIG_SRIO1           /* SRIO port 1 */
>  #define CONFIG_SRIO2           /* SRIO port 2 */
> -#elif defined(CONFIG_ARCH_T2081)
>  #endif
>
>  /* High Level Configuration Options */
> @@ -50,8 +49,6 @@
>  #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
>  #if defined(CONFIG_ARCH_T2080)
>  #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
> -#elif defined(CONFIG_ARCH_T2081)
> -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
>  #endif
>  #endif
>
> @@ -67,8 +64,6 @@
>  #endif
>  #if defined(CONFIG_ARCH_T2080)
>  #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
> -#elif defined(CONFIG_ARCH_T2081)
> -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
>  #endif
>  #endif
>
> @@ -83,8 +78,6 @@
>  #endif
>  #if defined(CONFIG_ARCH_T2080)
>  #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
> -#elif defined(CONFIG_ARCH_T2081)
> -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
>  #endif
>  #endif
>
> --
> 2.17.1
>
>


More information about the U-Boot mailing list