[PATCH 11/57] arm: Remove secomx6quq7 board
Tom Rini
trini at konsulko.com
Sun Feb 21 02:05:48 CET 2021
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Boris Brezillon <boris.brezillon at free-electrons.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/mach-imx/mx6/Kconfig | 4 -
board/seco/Kconfig | 65 -----------
board/seco/common/Makefile | 3 -
board/seco/common/mx6.c | 137 ----------------------
board/seco/common/mx6.h | 9 --
board/seco/mx6quq7/MAINTAINERS | 6 -
board/seco/mx6quq7/Makefile | 5 -
board/seco/mx6quq7/mx6quq7-2g.cfg | 172 ----------------------------
board/seco/mx6quq7/mx6quq7.c | 181 ------------------------------
configs/secomx6quq7_defconfig | 39 -------
include/configs/secomx6quq7.h | 81 -------------
11 files changed, 702 deletions(-)
delete mode 100644 board/seco/Kconfig
delete mode 100644 board/seco/common/Makefile
delete mode 100644 board/seco/common/mx6.c
delete mode 100644 board/seco/common/mx6.h
delete mode 100644 board/seco/mx6quq7/MAINTAINERS
delete mode 100644 board/seco/mx6quq7/Makefile
delete mode 100644 board/seco/mx6quq7/mx6quq7-2g.cfg
delete mode 100644 board/seco/mx6quq7/mx6quq7.c
delete mode 100644 configs/secomx6quq7_defconfig
delete mode 100644 include/configs/secomx6quq7.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index efd5ae054f6d..013468833984 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -546,9 +546,6 @@ config TARGET_PCL063_ULL
select DM_THERMAL
select SUPPORT_SPL
-config TARGET_SECOMX6
- bool "secomx6 boards"
-
config TARGET_SKSIMX6
bool "sks-imx6"
depends on MX6QDL
@@ -729,7 +726,6 @@ source "board/softing/vining_2000/Kconfig"
source "board/liebherr/display5/Kconfig"
source "board/liebherr/mccmon6/Kconfig"
source "board/logicpd/imx6/Kconfig"
-source "board/seco/Kconfig"
source "board/sks-kinkel/sksimx6/Kconfig"
source "board/solidrun/mx6cuboxi/Kconfig"
source "board/somlabs/visionsom-6ull/Kconfig"
diff --git a/board/seco/Kconfig b/board/seco/Kconfig
deleted file mode 100644
index 12dd965ad52a..000000000000
--- a/board/seco/Kconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-if TARGET_SECOMX6
-
-choice
- prompt "SECO i.MX6 Board variant"
- optional
-
-config SECOMX6_Q7
- bool "Q7"
-
-config SECOMX6_UQ7
- bool "uQ7"
-
-config SECOMX6_USBC
- bool "uSBC"
-
-endchoice
-
-choice
- prompt "SECO i.MX6 SoC variant"
- optional
-
-config SECOMX6Q
- bool "i.MX6Q"
- depends on MX6Q
-
-config SECOMX6DL
- bool "i.MX6DL"
- depends on MX6DL
-
-config SECOMX6S
- bool "i.MX6S"
- depends on MX6S
-
-endchoice
-
-choice
- prompt "DDR size"
-
-config SECOMX6_512MB
- bool "512MB"
-
-config SECOMX6_1GB
- bool "1GB"
-
-config SECOMX6_2GB
- bool "2GB"
-
-config SECOMX6_4GB
- bool "4GB"
-
-endchoice
-
-config IMX_CONFIG
- default "board/seco/mx6quq7/mx6quq7-2g.cfg" if SECOMX6_UQ7 && SECOMX6Q && SECOMX6_2GB
-
-config SYS_BOARD
- default "mx6quq7" if SECOMX6_UQ7 && SECOMX6Q
-
-config SYS_VENDOR
- default "seco"
-
-config SYS_CONFIG_NAME
- default "secomx6quq7" if SECOMX6_UQ7 && SECOMX6Q
-
-endif
diff --git a/board/seco/common/Makefile b/board/seco/common/Makefile
deleted file mode 100644
index 4220e89bc5c0..000000000000
--- a/board/seco/common/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-$(CONFIG_TARGET_SECOMX6) += mx6.o
diff --git a/board/seco/common/mx6.c b/board/seco/common/mx6.c
deleted file mode 100644
index 51832b9d082f..000000000000
--- a/board/seco/common/mx6.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- * Copyright (C) 2015 ECA Sinters
- *
- * Author: Fabio Estevam <fabio.estevam at freescale.com>
- * Modified by: Boris Brezillon <boris.brezillon at free-electrons.com>
- */
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <micrel.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <i2c.h>
-
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
- PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
- PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const uart2_pads[] = {
- MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-void seco_mx6_setup_uart_iomux(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
-}
-
-#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | \
- PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const enet_pads[] = {
- MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
- MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
-};
-
-void seco_mx6_setup_enet_iomux(void)
-{
- imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
-}
-
-int seco_mx6_rgmii_rework(struct phy_device *phydev)
-{
- /* control data pad skew - devaddr = 0x02, register = 0x04 */
- ksz9031_phy_extended_write(phydev, 0x02,
- MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
- MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
- /* rx data pad skew - devaddr = 0x02, register = 0x05 */
- ksz9031_phy_extended_write(phydev, 0x02,
- MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
- MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
- /* tx data pad skew - devaddr = 0x02, register = 0x05 */
- ksz9031_phy_extended_write(phydev, 0x02,
- MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
- MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
-
- /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
- ksz9031_phy_extended_write(phydev, 0x02,
- MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
- MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);
- return 0;
-}
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
- PAD_CTL_SPEED_LOW | \
- PAD_CTL_DSE_80ohm | \
- PAD_CTL_SRE_FAST | \
- PAD_CTL_HYS)
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-void seco_mx6_setup_usdhc_iomux(int id)
-{
- switch (id) {
- case 3:
- imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
- ARRAY_SIZE(usdhc3_pads));
- break;
-
- case 4:
- imx_iomux_v3_setup_multiple_pads(usdhc4_pads,
- ARRAY_SIZE(usdhc4_pads));
- break;
-
- default:
- printf("Warning: invalid usdhc id (%d)\n", id);
- break;
- }
-}
diff --git a/board/seco/common/mx6.h b/board/seco/common/mx6.h
deleted file mode 100644
index a05db673e284..000000000000
--- a/board/seco/common/mx6.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __SECO_COMMON_MX6_H
-#define __SECO_COMMON_MX6_H
-
-void seco_mx6_setup_uart_iomux(void);
-void seco_mx6_setup_enet_iomux(void);
-int seco_mx6_rgmii_rework(struct phy_device *phydev);
-void seco_mx6_setup_usdhc_iomux(int id);
-
-#endif /* __SECO_COMMON_MX6_H */
diff --git a/board/seco/mx6quq7/MAINTAINERS b/board/seco/mx6quq7/MAINTAINERS
deleted file mode 100644
index 60fd4caab8f5..000000000000
--- a/board/seco/mx6quq7/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MX6QUQ7 BOARD
-M: Boris Brezillon <boris.brezillon at free-electrons.com>
-S: Maintained
-F: board/seco/mx6quq7/
-F: include/configs/secomx6quq7.h
-F: configs/secomx6quq7_defconfig
diff --git a/board/seco/mx6quq7/Makefile b/board/seco/mx6quq7/Makefile
deleted file mode 100644
index c7aea8c851a5..000000000000
--- a/board/seco/mx6quq7/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2015 ECA Sinters
-
-obj-y := mx6quq7.o
diff --git a/board/seco/mx6quq7/mx6quq7-2g.cfg b/board/seco/mx6quq7/mx6quq7-2g.cfg
deleted file mode 100644
index 68d13cc92bc8..000000000000
--- a/board/seco/mx6quq7/mx6quq7-2g.cfg
+++ /dev/null
@@ -1,172 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2013 Seco USA Inc
- *
- * Refer doc/imx/mkimage/imximage.txt for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-
-/* image version */
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM sd
-
-#define __ASSEMBLY__
-#include <config.h>
-#include "asm/arch/mx6-ddr.h"
-#include "asm/arch/iomux.h"
-#include "asm/arch/crm_regs.h"
-
-/* DDR IO TYPE */
-DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
-DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
-
-/* DATA STROBE */
-DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
-DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028
-
-/* DATA */
-DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
-DATA 4, MX6_IOM_GRP_B0DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B1DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B2DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B3DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B4DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B5DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B6DS, 0x00000028
-DATA 4, MX6_IOM_GRP_B7DS, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028
-DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028
-/* ADDRESS */
-DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028
-DATA 4, MX6_IOM_DRAM_CAS, 0x00000028
-DATA 4, MX6_IOM_DRAM_RAS, 0x00000028
-
-/* CONTROL */
-DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
-DATA 4, MX6_IOM_DRAM_RESET, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
-DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028
-
-/* CLOCK */
-DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028
-DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028
-
-/*
- * DDR3 SETTINGS
- * Read Data Bit Delay
- */
-DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
-DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
-DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
-
-
-/* Write Leveling */
-DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F
-DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
-DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F0001
-DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
-
-/* DQS gating, read delay, write delay calibration values */
-DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x431A0326
-DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0323031B
-DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x433F0340
-DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0345031C
-
-/* Read calibration */
-DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40343137
-DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x40372F45
-
-/* write calibration */
-DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x32414741
-DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4731473C
-
-/* Complete calibration by forced measurement: */
-DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
-DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
-
-/*
- * MMDC init:
- * in DDR3, 64-bit mode, only MMDC0 is init
- */
-DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036
-DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040
-
-DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7955
-DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64
-DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB
-
-DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
-DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2
-DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023
-
-/* CS0_END = 2304MB in step da 256Mb -> [(2304*8/256) - 1] */
-DATA 4, MX6_MMDC_P0_MDASP, 0x00000047
-
-/* SDE_1=0; ROW=3; BL=1; DSIZ=2 -> 64 bit */
-DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000
-
-/* Initialize DDR3 on CS_0 and CS_1 */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x02088032
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031
-
-/* P0 01c */
-/* write 0x0940 to MR0 bank_0 (Burst Type=1 (Interlived)) */
-DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030
-
-/*ZQ - Calibrationi */
-DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
-DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
-DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
-
-DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227
-DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227
-
-DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576
-
-DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
-DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
-
-/* set the default clock gate to save power */
-DATA 4, CCM_CCGR0, 0x00C03F3F
-DATA 4, CCM_CCGR1, 0x0030FC03
-DATA 4, CCM_CCGR2, 0x0FFFC000
-DATA 4, CCM_CCGR3, 0x3FF00000
-DATA 4, CCM_CCGR4, 0x00FFF300
-DATA 4, CCM_CCGR5, 0x0F0000C3
-DATA 4, CCM_CCGR6, 0x000003FF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4, MX6_IOMUXC_GPR4, 0xF00000FF
-
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4, MX6_IOMUXC_GPR6, 0x007F007F
-DATA 4, MX6_IOMUXC_GPR7, 0x007F007F
-
diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c
deleted file mode 100644
index a061d7d8afbc..000000000000
--- a/board/seco/mx6quq7/mx6quq7.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- * Copyright (C) 2015 ECA Sinters
- *
- * Author: Fabio Estevam <fabio.estevam at freescale.com>
- * Modified by: Boris Brezillon <boris.brezillon at free-electrons.com>
- */
-
-#include <init.h>
-#include <net.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <i2c.h>
-
-#include "../common/mx6.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- seco_mx6_setup_uart_iomux();
-
- return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- seco_mx6_rgmii_rework(phydev);
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- uint32_t base = IMX_FEC_BASE;
- struct mii_dev *bus = NULL;
- struct phy_device *phydev = NULL;
- int ret = 0;
-
- seco_mx6_setup_enet_iomux();
-
-#ifdef CONFIG_FEC_MXC
- bus = fec_get_miibus(base, -1);
- if (!bus)
- return -ENOMEM;
-
- /* scan phy 4,5,6,7 */
- phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
- if (!phydev) {
- free(bus);
- return -ENOMEM;
- }
-
- printf("using phy at %d\n", phydev->addr);
- ret = fec_probe(bis, -1, base, bus, phydev);
- if (ret) {
- free(phydev);
- free(bus);
- printf("FEC MXC: %s:failed\n", __func__);
- }
-#endif
-
- return ret;
-}
-
-#define USDHC4_CD_GPIO IMX_GPIO_NR(2, 6)
-
-static struct fsl_esdhc_cfg usdhc_cfg[2] = {
- {USDHC3_BASE_ADDR, 0, 4},
- {USDHC4_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC3_BASE_ADDR:
- ret = 1; /* Assume eMMC is always present */
- break;
- case USDHC4_BASE_ADDR:
- ret = !gpio_get_value(USDHC4_CD_GPIO);
- break;
- }
-
- return ret;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
- u32 index = 0;
- int ret;
-
- /*
- * Following map is done:
- * (U-Boot device node) (Physical Port)
- * mmc0 eMMC on Board
- * mmc1 Ext SD
- */
- for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
- switch (index) {
- case 0:
- seco_mx6_setup_usdhc_iomux(3);
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- break;
- case 1:
- seco_mx6_setup_usdhc_iomux(4);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- break;
-
- default:
- printf("Warning: %d exceed maximum number of SD ports %d\n",
- index + 1, CONFIG_SYS_FSL_USDHC_NUM);
- return -EINVAL;
- }
-
- ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-int board_init(void)
-{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 |
- MUX_PAD_CTRL(NO_PAD_CTRL));
-
- gpio_direction_output(IMX_GPIO_NR(2, 4), 0);
-
- /* Set Low */
- gpio_set_value(IMX_GPIO_NR(2, 4), 0);
- udelay(1000);
-
- /* Set High */
- gpio_set_value(IMX_GPIO_NR(2, 4), 1);
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: SECO uQ7\n");
-
- return 0;
-}
diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig
deleted file mode 100644
index cc56b2e2b6c4..000000000000
--- a/configs/secomx6quq7_defconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_MX6Q=y
-CONFIG_TARGET_SECOMX6=y
-CONFIG_SECOMX6_UQ7=y
-CONFIG_SECOMX6Q=y
-CONFIG_SECOMX6_2GB=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_BOOTDELAY=3
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="SECO MX6Q uQ7 U-Boot > "
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_MII=y
-CONFIG_MXC_UART=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h
deleted file mode 100644
index bd3c3402c485..000000000000
--- a/include/configs/secomx6quq7.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Seco S.r.l
- *
- * Configuration settings for the Seco Boards.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-#define CONFIG_BOARD_REVISION_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
-
-#define CONFIG_MXC_UART_BASE UART2_BASE
-
-/* MMC Configuration */
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-/* Ethernet Configuration */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 6
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "ethprime=FEC0\0" \
- "netdev=eth0\0" \
- "ethprime=FEC0\0" \
- "uboot=u-boot.bin\0" \
- "kernel=uImage\0" \
- "nfsroot=/opt/eldk/arm\0" \
- "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \
- "ip_server=10.0.0.1\0" \
- "nfs_path=/targetfs \0" \
- "memory=mem=1024M\0" \
- "bootdev=mmc dev 0; ext2load mmc 0:1\0" \
- "root=root=/dev/mmcblk0p1\0" \
- "option=rootwait rw fixrtc rootflags=barrier=1\0" \
- "cpu_freq=arm_freq=996\0" \
- "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \
- " ${option} ${memory} ${cpu_freq}\0" \
- "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \
- " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \
- " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \
- " ${memory} ${cpu_freq}\0" \
- "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
- "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \
- " bootm 0x10800000\0" \
- "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
-
-#define CONFIG_SYS_HZ 1000
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Environment organization */
-
-#if defined(CONFIG_ENV_IS_IN_MMC)
- #define CONFIG_DYNAMIC_MMC_DEVNO
-#endif
-
-#endif /* __CONFIG_H */
--
2.17.1
More information about the U-Boot
mailing list