[PATCH v3 5/9] s5p4418_nanopi2: Drop dead code

Simon Glass sjg at chromium.org
Thu Feb 4 18:55:47 CET 2021


This code is still using the old command typedef. It was not noticed since
this file is not currently built. It is using a non-existent option in the
Makefile.

Drop this file since it is not needed for correct operation.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v2)

Changes in v2:
- Drop the file instead of fixing it up

 arch/arm/mach-nexell/Makefile         |   1 -
 arch/arm/mach-nexell/cmd_boot_linux.c | 144 --------------------------
 2 files changed, 145 deletions(-)
 delete mode 100644 arch/arm/mach-nexell/cmd_boot_linux.c

diff --git a/arch/arm/mach-nexell/Makefile b/arch/arm/mach-nexell/Makefile
index 10b3963ed10..dda16dbb8e6 100644
--- a/arch/arm/mach-nexell/Makefile
+++ b/arch/arm/mach-nexell/Makefile
@@ -10,4 +10,3 @@ obj-y				+= nx_gpio.o
 obj-y				+= tieoff.o
 obj-$(CONFIG_ARCH_S5P4418)	+= reg-call.o
 obj-$(CONFIG_ARCH_S5P4418)	+= nx_sec_reg.o
-obj-$(CONFIG_CMD_BOOTL)		+= cmd_boot_linux.o
diff --git a/arch/arm/mach-nexell/cmd_boot_linux.c b/arch/arm/mach-nexell/cmd_boot_linux.c
deleted file mode 100644
index f2dedfe1625..00000000000
--- a/arch/arm/mach-nexell/cmd_boot_linux.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 nexell
- * jhkim <jhkim at nexell.co.kr>
- */
-
-#include <common.h>
-#include <bootm.h>
-#include <command.h>
-#include <environment.h>
-#include <errno.h>
-#include <image.h>
-#include <fdt_support.h>
-
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_CLI_FRAMEWORK)
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static bootm_headers_t linux_images;
-
-static void boot_go_set_os(cmd_tbl_t *cmdtp, int flag, int argc,
-			   char * const argv[],
-			   bootm_headers_t *images)
-{
-	char * const img_addr = argv[0];
-
-	images->os.type = IH_TYPE_KERNEL;
-	images->os.comp = IH_COMP_NONE;
-	images->os.os = IH_OS_LINUX;
-	images->os.load = simple_strtoul(img_addr, NULL, 16);
-	images->ep = images->os.load;
-#if defined(CONFIG_ARM)
-	images->os.arch = IH_ARCH_ARM;
-#elif defined(CONFIG_ARM64)
-	images->os.arch = IH_ARCH_ARM64;
-#else
-	#error "Not support architecture ..."
-#endif
-	if (!IS_ENABLED(CONFIG_OF_LIBFDT) && !IS_ENABLED(CONFIG_SPL_BUILD)) {
-		/* set DTB address for linux kernel */
-		if (argc > 2) {
-			unsigned long ft_addr;
-
-			ft_addr = simple_strtol(argv[2], NULL, 16);
-			images->ft_addr = (char *)ft_addr;
-
-			/*
-			 * if not defined IMAGE_ENABLE_OF_LIBFDT,
-			 * must be set to fdt address
-			 */
-			if (!IMAGE_ENABLE_OF_LIBFDT)
-				gd->bd->bi_boot_params = ft_addr;
-
-			debug("## set ft:%08lx and boot params:%08lx [control of:%s]"
-			      "...\n", ft_addr, gd->bd->bi_boot_params,
-			      IMAGE_ENABLE_OF_LIBFDT ? "on" : "off");
-		}
-	}
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
-static void boot_start_lmb(bootm_headers_t *images)
-{
-	ulong		mem_start;
-	phys_size_t	mem_size;
-
-	lmb_init(&images->lmb);
-
-	mem_start = getenv_bootm_low();
-	mem_size = getenv_bootm_size();
-
-	lmb_add(&images->lmb, (phys_addr_t)mem_start, mem_size);
-
-	arch_lmb_reserve(&images->lmb);
-	board_lmb_reserve(&images->lmb);
-}
-#else
-#define lmb_reserve(lmb, base, size)
-static inline void boot_start_lmb(bootm_headers_t *images) { }
-#endif
-
-int do_boot_linux(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	boot_os_fn *boot_fn;
-	bootm_headers_t *images = &linux_images;
-	int flags;
-	int ret;
-
-	boot_start_lmb(images);
-
-	flags  = BOOTM_STATE_START;
-
-	argc--; argv++;
-	boot_go_set_os(cmdtp, flag, argc, argv, images);
-
-	if (IS_ENABLED(CONFIG_OF_LIBFDT)) {
-		/* find flattened device tree */
-		ret = boot_get_fdt(flag, argc, argv, IH_ARCH_DEFAULT, images,
-				   &images->ft_addr, &images->ft_len);
-		if (ret) {
-			puts("Could not find a valid device tree\n");
-			return 1;
-		}
-		set_working_fdt_addr((ulong)images->ft_addr);
-	}
-
-	if (!IS_ENABLED(CONFIG_OF_LIBFDT))
-		flags |= BOOTM_STATE_OS_GO;
-
-	boot_fn = do_bootm_linux;
-	ret = boot_fn(flags, argc, argv, images);
-
-	if (ret == BOOTM_ERR_UNIMPLEMENTED)
-		show_boot_progress(BOOTSTAGE_ID_DECOMP_UNIMPL);
-	else if (ret == BOOTM_ERR_RESET)
-		do_reset(cmdtp, flag, argc, argv);
-
-	return ret;
-}
-
-U_BOOT_CMD(bootl, CONFIG_SYS_MAXARGS, 1, do_boot_linux,
-	   "boot linux image from memory",
-	   "[addr [arg ...]]\n    - boot linux image stored in memory\n"
-	   "\tuse a '-' for the DTB address\n"
-);
-#endif
-
-#if defined(CONFIG_CMD_BOOTD) && !defined(CONFIG_CMD_BOOTM)
-int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	return run_command(env_get("bootcmd"), flag);
-}
-
-U_BOOT_CMD(boot, 1, 1, do_bootd,
-	   "boot default, i.e., run 'bootcmd'",
-	   ""
-);
-
-/* keep old command name "bootd" for backward compatibility */
-U_BOOT_CMD(bootd, 1,	1,	do_bootd,
-	   "boot default, i.e., run 'bootcmd'",
-	   ""
-);
-#endif
-- 
2.30.0.365.g02bc693789-goog



More information about the U-Boot mailing list