[PATCH 0/5] Add Micronova srl S027_3 board support

[Giulio Benetti]

Sorry I've forgotten to send patch for adding dts uart1_pa_pins.
I wait for some comment before sending v2.

On 2/19/21 12:26 AM, Giulio Benetti wrote:
> Add Micronova srl S027_3 board support
> 
> Giulio Benetti (5):
>    arm: allwinner: dts: a20: add uart2_pa_pins
>    sunxi: allow SYS_BOARD to be set
>    sunxi: add SYS_VENDOR to Kconfig
>    sun7i: add support for Micronova srl s027_3 board
>    pwm: sunxi: enable pwm0 support on sun7i
> 
>   arch/arm/dts/Makefile                 |   1 +
>   arch/arm/dts/sun7i-a20-s027_3.dts     | 272 ++++++++++++++++++++++++++
>   arch/arm/dts/sun7i-a20.dtsi           |   5 +
>   arch/arm/include/asm/arch-sunxi/pwm.h |   3 +-
>   arch/arm/mach-sunxi/Kconfig           |   5 +
>   board/micronovasrl/s027_3/MAINTAINERS |   5 +
>   board/micronovasrl/s027_3/Makefile    |   8 +
>   board/micronovasrl/s027_3/s027_3.c    |  29 +++
>   configs/micronovasrl-s027_3_defconfig |  37 ++++
>   9 files changed, 364 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/dts/sun7i-a20-s027_3.dts
>   create mode 100644 board/micronovasrl/s027_3/MAINTAINERS
>   create mode 100644 board/micronovasrl/s027_3/Makefile
>   create mode 100644 board/micronovasrl/s027_3/s027_3.c
>   create mode 100644 configs/micronovasrl-s027_3_defconfig
> 

-- 
Giulio Benetti
Benetti Engineering sas