MX6sabresd broken since v2019.04

[Fabio Estevam]

On Mon, Feb 1, 2021 at 10:01 AM Marek Vasut <marex at denx.de> wrote:

> I think
> u-boot-with-spl.imx: SPL u-boot.uim FORCE
> should really be
> u-boot-with-spl.imx: SPL u-boot.img FORCE
> under certain (which ?) conditions.
>
> Can you take a look into that ?

I tried your suggestion and it boots now:

U-Boot SPL 2021.01-dirty (Feb 01 2021 - 10:07:21 -0300)
Trying to boot from MMC1


U-Boot 2021.01-dirty (Feb 01 2021 - 10:07:21 -0300)

CPU:   Freescale i.MX6Q rev1.2 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 50C
Reset cause: POR
Model: Freescale i.MX6 Quad SABRE Smart Device Board
I2C:   ready
DRAM:  1 GiB
PMIC:  PFUZE100 ID=0x10
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 3
Loading Environment from MMC... *** Warning - bad CRC, using default environment

No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   eth0: ethernet at 2188000
Hit any key to stop autoboot:  0