[PATCH 14/25] arm: Remove sheevaplug board
Chris Packham
judge.packham at gmail.com
Wed Feb 10 08:07:58 CET 2021
On Wed, 10 Feb 2021, 2:07 AM Tom Rini, <trini at konsulko.com> wrote:
> This board has not been converted to CONFIG_DM_MMC by the deadline of
> v2019.04, which is almost two years ago. In addition there are other DM
> migrations it is also missing. Remove it.
>
We did get the odd bug report from debian for sheevaplug. They were
reasonably popular with enthusiasts at one point. Personally I wouldn't
miss this board but it might be worth a heads up (hence adding Vagrant C.
to the Cc).
> Cc: Prafulla Wadaskar <prafulla at marvell.com>
> Signed-off-by: Tom Rini <trini at konsulko.com>
> ---
> arch/arm/dts/Makefile | 3 +-
> arch/arm/dts/kirkwood-sheevaplug-common.dtsi | 104 --------------
> arch/arm/dts/kirkwood-sheevaplug.dts | 42 ------
> arch/arm/mach-kirkwood/Kconfig | 4 -
> board/Marvell/sheevaplug/Kconfig | 12 --
> board/Marvell/sheevaplug/MAINTAINERS | 6 -
> board/Marvell/sheevaplug/Makefile | 7 -
> board/Marvell/sheevaplug/kwbimage.cfg | 144 -------------------
> board/Marvell/sheevaplug/sheevaplug.c | 135 -----------------
> board/Marvell/sheevaplug/sheevaplug.h | 24 ----
> configs/sheevaplug_defconfig | 55 -------
> include/configs/sheevaplug.h | 73 ----------
> 12 files changed, 1 insertion(+), 608 deletions(-)
> delete mode 100644 arch/arm/dts/kirkwood-sheevaplug-common.dtsi
> delete mode 100644 arch/arm/dts/kirkwood-sheevaplug.dts
> delete mode 100644 board/Marvell/sheevaplug/Kconfig
> delete mode 100644 board/Marvell/sheevaplug/MAINTAINERS
> delete mode 100644 board/Marvell/sheevaplug/Makefile
> delete mode 100644 board/Marvell/sheevaplug/kwbimage.cfg
> delete mode 100644 board/Marvell/sheevaplug/sheevaplug.c
> delete mode 100644 board/Marvell/sheevaplug/sheevaplug.h
> delete mode 100644 configs/sheevaplug_defconfig
> delete mode 100644 include/configs/sheevaplug.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index b8f88bca0af9..12a74ed0eb08 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -58,8 +58,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
> kirkwood-ns2lite.dtb \
> kirkwood-ns2max.dtb \
> kirkwood-ns2mini.dtb \
> - kirkwood-pogo_e02.dtb \
> - kirkwood-sheevaplug.dtb
> + kirkwood-pogo_e02.dtb
>
> dtb-$(CONFIG_MACH_S900) += \
> bubblegum_96.dtb
> diff --git a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi
> b/arch/arm/dts/kirkwood-sheevaplug-common.dtsi
> deleted file mode 100644
> index 0a698d3b7393..000000000000
> --- a/arch/arm/dts/kirkwood-sheevaplug-common.dtsi
> +++ /dev/null
> @@ -1,104 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs
> - *
> - * Copyright (C) 2013 Simon Baatz <gmbnomis at gmail.com>
> - */
> -
> -#include "kirkwood.dtsi"
> -#include "kirkwood-6281.dtsi"
> -
> -/ {
> - memory {
> - device_type = "memory";
> - reg = <0x00000000 0x20000000>;
> - };
> -
> - chosen {
> - bootargs = "console=ttyS0,115200n8 earlyprintk";
> - stdout-path = &uart0;
> - };
> -
> - ocp at f1000000 {
> - pinctrl: pin-controller at 10000 {
> -
> - pmx_usb_power_enable: pmx-usb-power-enable {
> - marvell,pins = "mpp29";
> - marvell,function = "gpio";
> - };
> - pmx_led_red: pmx-led-red {
> - marvell,pins = "mpp46";
> - marvell,function = "gpio";
> - };
> - pmx_led_blue: pmx-led-blue {
> - marvell,pins = "mpp49";
> - marvell,function = "gpio";
> - };
> - pmx_sdio_cd: pmx-sdio-cd {
> - marvell,pins = "mpp44";
> - marvell,function = "gpio";
> - };
> - pmx_sdio_wp: pmx-sdio-wp {
> - marvell,pins = "mpp47";
> - marvell,function = "gpio";
> - };
> - };
> - serial at 12000 {
> - status = "okay";
> - };
> - };
> -
> - regulators {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - pinctrl-0 = <&pmx_usb_power_enable>;
> - pinctrl-names = "default";
> -
> - usb_power: regulator at 1 {
> - compatible = "regulator-fixed";
> - reg = <1>;
> - regulator-name = "USB Power";
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - enable-active-high;
> - regulator-always-on;
> - regulator-boot-on;
> - gpio = <&gpio0 29 0>;
> - };
> - };
> -};
> -
> -&nand {
> - status = "okay";
> -
> - partition at 0 {
> - label = "u-boot";
> - reg = <0x0000000 0x100000>;
> - };
> -
> - partition at 100000 {
> - label = "uImage";
> - reg = <0x0100000 0x400000>;
> - };
> -
> - partition at 500000 {
> - label = "root";
> - reg = <0x0500000 0x1fb00000>;
> - };
> -};
> -
> -&mdio {
> - status = "okay";
> -
> - ethphy0: ethernet-phy at 0 {
> - reg = <0>;
> - };
> -};
> -
> -ð0 {
> - status = "okay";
> - ethernet0-port at 0 {
> - phy-handle = <ðphy0>;
> - };
> -};
> diff --git a/arch/arm/dts/kirkwood-sheevaplug.dts
> b/arch/arm/dts/kirkwood-sheevaplug.dts
> deleted file mode 100644
> index c73cc904e5c4..000000000000
> --- a/arch/arm/dts/kirkwood-sheevaplug.dts
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug
> - *
> - * Copyright (C) 2013 Simon Baatz <gmbnomis at gmail.com>
> - */
> -
> -/dts-v1/;
> -
> -#include "kirkwood-sheevaplug-common.dtsi"
> -
> -/ {
> - model = "Globalscale Technologies SheevaPlug";
> - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281",
> "marvell,kirkwood";
> -
> - ocp at f1000000 {
> - mvsdio at 90000 {
> - pinctrl-0 = <&pmx_sdio>;
> - pinctrl-names = "default";
> - status = "okay";
> - /* No CD or WP GPIOs */
> - broken-cd;
> - };
> - };
> -
> - gpio-leds {
> - compatible = "gpio-leds";
> - pinctrl-0 = <&pmx_led_blue &pmx_led_red>;
> - pinctrl-names = "default";
> -
> - health {
> - label = "sheevaplug:blue:health";
> - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
> - default-state = "keep";
> - };
> -
> - misc {
> - label = "sheevaplug:red:misc";
> - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
> - };
> - };
> -};
> diff --git a/arch/arm/mach-kirkwood/Kconfig
> b/arch/arm/mach-kirkwood/Kconfig
> index 6082bdb35b6c..1d2ba886dd1a 100644
> --- a/arch/arm/mach-kirkwood/Kconfig
> +++ b/arch/arm/mach-kirkwood/Kconfig
> @@ -13,9 +13,6 @@ config TARGET_DS109
> config TARGET_GURUPLUG
> bool "GuruPlug Board"
>
> -config TARGET_SHEEVAPLUG
> - bool "SheevaPlug Board"
> -
> config TARGET_LSXL
> bool "lsxl Board"
>
> @@ -70,7 +67,6 @@ config SYS_SOC
> source "board/Marvell/dreamplug/Kconfig"
> source "board/Synology/ds109/Kconfig"
> source "board/Marvell/guruplug/Kconfig"
> -source "board/Marvell/sheevaplug/Kconfig"
> source "board/buffalo/lsxl/Kconfig"
> source "board/cloudengines/pogo_e02/Kconfig"
> source "board/d-link/dns325/Kconfig"
> diff --git a/board/Marvell/sheevaplug/Kconfig
> b/board/Marvell/sheevaplug/Kconfig
> deleted file mode 100644
> index e5f928472994..000000000000
> --- a/board/Marvell/sheevaplug/Kconfig
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -if TARGET_SHEEVAPLUG
> -
> -config SYS_BOARD
> - default "sheevaplug"
> -
> -config SYS_VENDOR
> - default "Marvell"
> -
> -config SYS_CONFIG_NAME
> - default "sheevaplug"
> -
> -endif
> diff --git a/board/Marvell/sheevaplug/MAINTAINERS
> b/board/Marvell/sheevaplug/MAINTAINERS
> deleted file mode 100644
> index 2b0103d07dc9..000000000000
> --- a/board/Marvell/sheevaplug/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -SHEEVAPLUG BOARD
> -M: Prafulla Wadaskar <prafulla at marvell.com>
> -S: Maintained
> -F: board/Marvell/sheevaplug/
> -F: include/configs/sheevaplug.h
> -F: configs/sheevaplug_defconfig
> diff --git a/board/Marvell/sheevaplug/Makefile
> b/board/Marvell/sheevaplug/Makefile
> deleted file mode 100644
> index c39dd03e2d30..000000000000
> --- a/board/Marvell/sheevaplug/Makefile
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# (C) Copyright 2009
> -# Marvell Semiconductor <www.marvell.com>
> -# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> -
> -obj-y := sheevaplug.o
> diff --git a/board/Marvell/sheevaplug/kwbimage.cfg
> b/board/Marvell/sheevaplug/kwbimage.cfg
> deleted file mode 100644
> index f5206451da44..000000000000
> --- a/board/Marvell/sheevaplug/kwbimage.cfg
> +++ /dev/null
> @@ -1,144 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# (C) Copyright 2009
> -# Marvell Semiconductor <www.marvell.com>
> -# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> -# Refer to doc/README.kwbimage for more details about how-to
> -# configure and create kirkwood boot images.
> -#
> -
> -# Boot Media configurations
> -BOOT_FROM nand
> -NAND_ECC_MODE default
> -NAND_PAGE_SIZE 0x0800
> -
> -# SOC registers configuration using bootrom header extension
> -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
> -
> -# Configure RGMII-0 interface pad voltage to 1.8V
> -DATA 0xFFD100e0 0x1b1b1b9b
> -
> -#Dram initalization for SINGLE x16 CL=5 @ 400MHz
> -DATA 0xFFD01400 0x43000c30 # DDR Configuration register
> -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
> -# bit23-14: zero
> -# bit24: 1= enable exit self refresh mode on DDR access
> -# bit25: 1 required
> -# bit29-26: zero
> -# bit31-30: 01
> -
> -DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
> -# bit 4: 0=addr/cmd in smame cycle
> -# bit 5: 0=clk is driven during self refresh, we don't care for APX
> -# bit 6: 0=use recommended falling edge of clk for addr/cmd
> -# bit14: 0=input buffer always powered up
> -# bit18: 1=cpu lock transaction enabled
> -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled
> bit31=0
> -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz,
> unbuffered DIMM
> -# bit30-28: 3 required
> -# bit31: 0=no additional STARTBURST delay
> -
> -DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
> -# bit3-0: TRAS lsbs
> -# bit7-4: TRCD
> -# bit11- 8: TRP
> -# bit15-12: TWR
> -# bit19-16: TWTR
> -# bit20: TRAS msb
> -# bit23-21: 0x0
> -# bit27-24: TRRD
> -# bit31-28: TRTP
> -
> -DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
> -# bit6-0: TRFC
> -# bit8-7: TR2R
> -# bit10-9: TR2W
> -# bit12-11: TW2W
> -# bit31-13: zero required
> -
> -DATA 0xFFD01410 0x000000cc # DDR Address Control
> -# bit1-0: 00, Cs0width=x8
> -# bit3-2: 11, Cs0size=1Gb
> -# bit5-4: 00, Cs1width=x8
> -# bit7-6: 11, Cs1size=1Gb
> -# bit9-8: 00, Cs2width=nonexistent
> -# bit11-10: 00, Cs2size =nonexistent
> -# bit13-12: 00, Cs3width=nonexistent
> -# bit15-14: 00, Cs3size =nonexistent
> -# bit16: 0, Cs0AddrSel
> -# bit17: 0, Cs1AddrSel
> -# bit18: 0, Cs2AddrSel
> -# bit19: 0, Cs3AddrSel
> -# bit31-20: 0 required
> -
> -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
> -# bit0: 0, OpenPage enabled
> -# bit31-1: 0 required
> -
> -DATA 0xFFD01418 0x00000000 # DDR Operation
> -# bit3-0: 0x0, DDR cmd
> -# bit31-4: 0 required
> -
> -DATA 0xFFD0141C 0x00000C52 # DDR Mode
> -# bit2-0: 2, BurstLen=2 required
> -# bit3: 0, BurstType=0 required
> -# bit6-4: 4, CL=5
> -# bit7: 0, TestMode=0 normal
> -# bit8: 0, DLL reset=0 normal
> -# bit11-9: 6, auto-precharge write recovery ????????????
> -# bit12: 0, PD must be zero
> -# bit31-13: 0 required
> -
> -DATA 0xFFD01420 0x00000040 # DDR Extended Mode
> -# bit0: 0, DDR DLL enabled
> -# bit1: 0, DDR drive strenght normal
> -# bit2: 0, DDR ODT control lsd (disabled)
> -# bit5-3: 000, required
> -# bit6: 1, DDR ODT control msb, (disabled)
> -# bit9-7: 000, required
> -# bit10: 0, differential DQS enabled
> -# bit11: 0, required
> -# bit12: 0, DDR output buffer enabled
> -# bit31-13: 0 required
> -
> -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
> -# bit2-0: 111, required
> -# bit3 : 1 , MBUS Burst Chop disabled
> -# bit6-4: 111, required
> -# bit7 : 0
> -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >=
> 300MHz
> -# bit9 : 0 , no half clock cycle addition to dataout
> -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
> -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
> -# bit15-12: 1111 required
> -# bit31-16: 0 required
> -
> -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
> -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
> -
> -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
> -DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
> -# bit0: 1, Window enabled
> -# bit1: 0, Write Protect disabled
> -# bit3-2: 00, CS0 hit selected
> -# bit23-4: ones, required
> -# bit31-24: 0x0F, Size (i.e. 256MB)
> -
> -DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
> -DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1
> -
> -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
> -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
> -
> -DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
> -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
> -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
> -# bit3-2: 01, ODT1 active NEVER!
> -# bit31-4: zero, required
> -
> -DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
> -DATA 0xFFD01480 0x00000001 # DDR Initialization Control
> -#bit0=1, enable DDR init upon this register write
> -
> -# End of Header extension
> -DATA 0x0 0x0
> diff --git a/board/Marvell/sheevaplug/sheevaplug.c
> b/board/Marvell/sheevaplug/sheevaplug.c
> deleted file mode 100644
> index 6311ed3b2e59..000000000000
> --- a/board/Marvell/sheevaplug/sheevaplug.c
> +++ /dev/null
> @@ -1,135 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * (C) Copyright 2009
> - * Marvell Semiconductor <www.marvell.com>
> - * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> - */
> -
> -#include <common.h>
> -#include <init.h>
> -#include <miiphy.h>
> -#include <net.h>
> -#include <asm/mach-types.h>
> -#include <asm/arch/cpu.h>
> -#include <asm/arch/soc.h>
> -#include <asm/arch/mpp.h>
> -#include "sheevaplug.h"
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -int board_early_init_f(void)
> -{
> - /*
> - * default gpio configuration
> - * There are maximum 64 gpios controlled through 2 sets of
> registers
> - * the below configuration configures mainly initial LED status
> - */
> - mvebu_config_gpio(SHEEVAPLUG_OE_VAL_LOW,
> - SHEEVAPLUG_OE_VAL_HIGH,
> - SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH);
> -
> - /* Multi-Purpose Pins Functionality configuration */
> - static const u32 kwmpp_config[] = {
> - MPP0_NF_IO2,
> - MPP1_NF_IO3,
> - MPP2_NF_IO4,
> - MPP3_NF_IO5,
> - MPP4_NF_IO6,
> - MPP5_NF_IO7,
> - MPP6_SYSRST_OUTn,
> - MPP7_GPO,
> - MPP8_UART0_RTS,
> - MPP9_UART0_CTS,
> - MPP10_UART0_TXD,
> - MPP11_UART0_RXD,
> - MPP12_SD_CLK,
> - MPP13_SD_CMD,
> - MPP14_SD_D0,
> - MPP15_SD_D1,
> - MPP16_SD_D2,
> - MPP17_SD_D3,
> - MPP18_NF_IO0,
> - MPP19_NF_IO1,
> - MPP20_GPIO,
> - MPP21_GPIO,
> - MPP22_GPIO,
> - MPP23_GPIO,
> - MPP24_GPIO,
> - MPP25_GPIO,
> - MPP26_GPIO,
> - MPP27_GPIO,
> - MPP28_GPIO,
> - MPP29_TSMP9,
> - MPP30_GPIO,
> - MPP31_GPIO,
> - MPP32_GPIO,
> - MPP33_GPIO,
> - MPP34_GPIO,
> - MPP35_GPIO,
> - MPP36_GPIO,
> - MPP37_GPIO,
> - MPP38_GPIO,
> - MPP39_GPIO,
> - MPP40_GPIO,
> - MPP41_GPIO,
> - MPP42_GPIO,
> - MPP43_GPIO,
> - MPP44_GPIO,
> - MPP45_GPIO,
> - MPP46_GPIO,
> - MPP47_GPIO,
> - MPP48_GPIO,
> - MPP49_GPIO,
> - 0
> - };
> - kirkwood_mpp_conf(kwmpp_config, NULL);
> - return 0;
> -}
> -
> -int board_init(void)
> -{
> - /*
> - * arch number of board
> - */
> - gd->bd->bi_arch_number = MACH_TYPE_SHEEVAPLUG;
> -
> - /* adress of boot parameters */
> - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_RESET_PHY_R
> -/* Configure and enable MV88E1116 PHY */
> -void reset_phy(void)
> -{
> - u16 reg;
> - u16 devadr;
> - char *name = "egiga0";
> -
> - if (miiphy_set_current_dev(name))
> - return;
> -
> - /* command to read PHY dev address */
> - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
> - printf("Err..%s could not read PHY dev address\n",
> - __FUNCTION__);
> - return;
> - }
> -
> - /*
> - * Enable RGMII delay on Tx and Rx for CPU port
> - * Ref: sec 4.7.2 of chip datasheet
> - */
> - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
> - miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®);
> - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
> - miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
> - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
> -
> - /* reset the phy */
> - miiphy_reset(name, devadr);
> -
> - printf("88E1116 Initialized on %s\n", name);
> -}
> -#endif /* CONFIG_RESET_PHY_R */
> diff --git a/board/Marvell/sheevaplug/sheevaplug.h
> b/board/Marvell/sheevaplug/sheevaplug.h
> deleted file mode 100644
> index e026c1b53bd0..000000000000
> --- a/board/Marvell/sheevaplug/sheevaplug.h
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2009
> - * Marvell Semiconductor <www.marvell.com>
> - * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> - */
> -
> -#ifndef __SHEEVAPLUG_H
> -#define __SHEEVAPLUG_H
> -
> -#define SHEEVAPLUG_OE_LOW (~(0))
> -#define SHEEVAPLUG_OE_HIGH (~(0))
> -#define SHEEVAPLUG_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
> -#define SHEEVAPLUG_OE_VAL_HIGH (1 << 17) /* LED pin high */
> -
> -/* PHY related */
> -#define MV88E1116_LED_FCTRL_REG 10
> -#define MV88E1116_CPRSP_CR3_REG 21
> -#define MV88E1116_MAC_CTRL_REG 21
> -#define MV88E1116_PGADR_REG 22
> -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
> -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
> -
> -#endif /* __SHEEVAPLUG_H */
> diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig
> deleted file mode 100644
> index 34da356b8e2a..000000000000
> --- a/configs/sheevaplug_defconfig
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_SYS_DCACHE_OFF=y
> -CONFIG_ARCH_CPU_INIT=y
> -CONFIG_SYS_THUMB_BUILD=y
> -CONFIG_ARCH_KIRKWOOD=y
> -CONFIG_SYS_TEXT_BASE=0x600000
> -CONFIG_NR_DRAM_BANKS=2
> -CONFIG_TARGET_SHEEVAPLUG=y
> -CONFIG_ENV_SIZE=0x20000
> -CONFIG_ENV_OFFSET=0x80000
> -CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
> -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug"
> -# CONFIG_SYS_MALLOC_F is not set
> -CONFIG_BOOTDELAY=3
> -CONFIG_USE_PREBOOT=y
> -# CONFIG_DISPLAY_BOARDINFO is not set
> -CONFIG_HUSH_PARSER=y
> -CONFIG_CMD_BOOTZ=y
> -# CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_IDE=y
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_NAND=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_EXT4=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_JFFS2=y
> -CONFIG_CMD_MTDPARTS=y
> -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
>
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
> -CONFIG_CMD_UBI=y
> -CONFIG_ISO_PARTITION=y
> -CONFIG_OF_CONTROL=y
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_NAND=y
> -CONFIG_NETCONSOLE=y
> -CONFIG_DM=y
> -CONFIG_MVSATA_IDE=y
> -CONFIG_MTD=y
> -CONFIG_MTD_RAW_NAND=y
> -CONFIG_MVGBE=y
> -CONFIG_MII=y
> -CONFIG_DM_RTC=y
> -CONFIG_RTC_MV=y
> -CONFIG_SYS_NS16550=y
> -CONFIG_USB=y
> -CONFIG_DM_USB=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_LZMA=y
> -CONFIG_BZIP2=y
> diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
> deleted file mode 100644
> index e1f8fb8ac84b..000000000000
> --- a/include/configs/sheevaplug.h
> +++ /dev/null
> @@ -1,73 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * (C) Copyright 2009-2014
> - * Gerald Kerma <dreagle at doukki.net>
> - * Marvell Semiconductor <www.marvell.com>
> - * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> - */
> -
> -#ifndef _CONFIG_SHEEVAPLUG_H
> -#define _CONFIG_SHEEVAPLUG_H
> -
> -/*
> - * High Level Configuration Options (easy to change)
> - */
> -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
> -
> -#include "mv-plug-common.h"
> -
> -/*
> - * Environment variables configurations
> - */
> -/*
> - * max 4k env size is enough, but in case of nand
> - * it has to be rounded to sector size
> - */
> -/*
> - * Environment is right behind U-Boot in flash. Make sure U-Boot
> - * doesn't grow into the environment area.
> - */
> -#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
> -
> -/*
> - * Default environment variables
> - */
> -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
> - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
> - "bootm 0x6400000;"
> -
> -#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
> - "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT \
> - "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x400000\0" \
> - "x_bootcmd_usb=usb start\0" \
> - "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
> -
> -/*
> - * Ethernet Driver configuration
> - */
> -#ifdef CONFIG_CMD_NET
> -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
> -#define CONFIG_PHY_BASE_ADR 0
> -#endif /* CONFIG_CMD_NET */
> -
> -/*
> - * SDIO/MMC Card Configuration
> - */
> -#ifdef CONFIG_CMD_MMC
> -#define CONFIG_MVEBU_MMC
> -#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
> -#endif /* CONFIG_CMD_MMC */
> -
> -/*
> - * SATA driver configuration
> - */
> -#ifdef CONFIG_IDE
> -#define __io
> -#define CONFIG_IDE_PREINIT
> -#define CONFIG_MVSATA_IDE_USE_PORT0
> -#define CONFIG_MVSATA_IDE_USE_PORT1
> -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
> -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
> -#endif /* CONFIG_IDE */
> -
> -#endif /* _CONFIG_SHEEVAPLUG_H */
> --
> 2.17.1
>
>
More information about the U-Boot
mailing list