[RESEND v2 PATCH 00/16] Nokia RX-51: Fix USB TTY console and enable it

[Pali Rohár]

On Monday 08 February 2021 23:21:38 Pali Rohár wrote:
> On Monday 08 February 2021 23:15:33 Lukasz Majewski wrote:
> > Hi Pali,
> > 
> > >     Resended v2 patch series with fixed commit messages
> > > 
> > > This patch series fix usbtty code (serial console via USB peripheral
> > > mode), fix underlying musb peripheral code, fix compilation of
> > > CONFIG_USB_DEVICE (used by usbtty), remove unused Nokia RX-51 code to
> > > decrease size of U-Boot binary and finally enable usbtty serial
> > > console for Nokia RX-51.
> > > 
> > > With this patch series debugging of Nokia RX-51 can be done also via
> > > USB serial console.
> > > 
> > > It fixes also stability of musb code and allows usage of file
> > > transfers via Kermit protocol on Nokia RX-51. Kermit file transfer
> > > via U-Boot loadb command is stable on Nokia N900 and gives about
> > > 52kB/s transfer rate.
> > > 
> > > On computer this serial console is accessible via /dev/ttyACM0 device.
> > > 
> > 
> > I've integrated your patchset and now it turns out that the u-boot size
> > is too big:
> > https://dev.azure.com/lukma633/U-Boot/_build/results?buildId=24&view=results
> > https://dev.azure.com/lukma633/U-Boot/_build/results?buildId=24&view=logs&j=9a06d2a9-1498-5de0-2a01-be581d48ba67&t=f9a6b761-daa3-500f-4840-65a939c5040d
> 
> Ah :-(
> In November when I sent these patches, U-Boot binary was smaller.
> 
> > The branch is https://github.com/lmajewski/u-boot-dfu/tree/testing
> > 
> > Have you experienced similar issues?
> 
> Yes, memory for U-Boot is limited. It is needed to decrease size of
> U-Boot binary and then it will work.
> 
> I will try to look at it later and find some dead code which can be
> commented or removed to decrease binary size...

Just a quick test, could you try to add

CONFIG_OPTIMIZE_INLINING=y

into configs/nokia_rx51_defconfig file, if it helps?

> If you have an idea what increased U-Boot side it could help.
> 
> > > Pali Rohár (16):
> > >   serial: usbtty: Fix puts function
> > >   serial: usbtty: Send urb data in correct order
> > >   usb: musb: Fix compilation of gadget code
> > >   usb: musb: Always clear the data toggle bit when configuring ep
> > >   usb: musb: Fix configuring FIFO for endpoints
> > >   usb: musb: Read value of PERI_RXCSR to 16bit variable
> > >   usb: musb: Fix transmission of bigger buffers
> > >   usb: musb: Fix receiving of bigger buffers
> > >   usb: musb: Fix handling interrupts for EP0 and SET ADDRESS commmand
> > >   usb: musb: Ensure that we set musb dynamic FIFO buffer for every
> > >     endpoint
> > >   usb: gadget: Use dbg_ep0() macro instead of serial_printf()
> > >   arm: omap3: Compile lowlevel_init() function only when it is used
> > >   arm: omap3: Compile s_init() function only when it is used
> > >   Nokia RX-51: Remove function set_muxconf_regs()
> > >   Nokia RX-51: Move content of rx51.h to rx51.c
> > >   Nokia RX-51: Enable usbtty serial console by default
> > > 
> > >  Makefile                                  |   1 +
> > >  arch/arm/mach-omap2/omap3/board.c         |   3 +
> > >  arch/arm/mach-omap2/omap3/lowlevel_init.S |   6 +-
> > >  board/nokia/rx51/rx51.c                   |  28 +-
> > >  board/nokia/rx51/rx51.h                   | 377
> > > ---------------------- configs/nokia_rx51_defconfig              |
> > > 7 +- doc/README.nokia_rx51                     |  15 +-
> > >  drivers/serial/usbtty.c                   |  16 +-
> > >  drivers/usb/gadget/ep0.c                  |  16 +-
> > >  drivers/usb/musb/musb_core.c              |  12 +-
> > >  drivers/usb/musb/musb_udc.c               |  61 ++--
> > >  include/configs/nokia_rx51.h              |  21 +-
> > >  12 files changed, 82 insertions(+), 481 deletions(-)
> > >  delete mode 100644 board/nokia/rx51/rx51.h
> > > 
> > 
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
> 
>