[PATCH v3 08/12] pinctrl: single: add register access functions
Dario Binacchi
dariobin at libero.it
Sun Feb 28 15:12:37 CET 2021
The configuration of pinmux registers was implemented with duplicate
code which can be removed by adding two functions for read/write access.
Access to 8-bit registers has also been added.
Signed-off-by: Dario Binacchi <dariobin at libero.it>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Changes in v3:
- Added Simon Glass review tag.
Changes in v2:
- Updated commit message.
- Remove pointer to access functions.
drivers/pinctrl/pinctrl-single.c | 71 +++++++++++++++++++++-----------
1 file changed, 46 insertions(+), 25 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
index 630a6c08b8..5b3ccc2281 100644
--- a/drivers/pinctrl/pinctrl-single.c
+++ b/drivers/pinctrl/pinctrl-single.c
@@ -56,6 +56,38 @@ struct single_fdt_bits_cfg {
fdt32_t mask;
};
+static unsigned int single_read(struct udevice *dev, fdt_addr_t reg)
+{
+ struct single_pdata *pdata = dev_get_plat(dev);
+
+ switch (pdata->width) {
+ case 8:
+ return readb(reg);
+ case 16:
+ return readw(reg);
+ default: /* 32 bits */
+ return readl(reg);
+ }
+
+ return readb(reg);
+}
+
+static void single_write(struct udevice *dev, unsigned int val, fdt_addr_t reg)
+{
+ struct single_pdata *pdata = dev_get_plat(dev);
+
+ switch (pdata->width) {
+ case 8:
+ writeb(val, reg);
+ break;
+ case 16:
+ writew(val, reg);
+ break;
+ default: /* 32 bits */
+ writel(val, reg);
+ }
+}
+
/**
* single_configure_pins() - Configure pins based on FDT data
*
@@ -93,19 +125,10 @@ static int single_configure_pins(struct udevice *dev,
reg = pdata->base + offset;
val = fdt32_to_cpu(pins->val) & pdata->mask;
- switch (pdata->width) {
- case 16:
- writew((readw(reg) & ~pdata->mask) | val, reg);
- break;
- case 32:
- writel((readl(reg) & ~pdata->mask) | val, reg);
- break;
- default:
- dev_warn(dev, "unsupported register width %i\n",
- pdata->width);
- continue;
- }
+ single_write(dev, (single_read(dev, reg) & ~pdata->mask) | val,
+ reg);
dev_dbg(dev, " reg/val %pa/0x%08x\n", ®, val);
+
}
return 0;
}
@@ -131,19 +154,7 @@ static int single_configure_bits(struct udevice *dev,
mask = fdt32_to_cpu(pins->mask);
val = fdt32_to_cpu(pins->val) & mask;
-
- switch (pdata->width) {
- case 16:
- writew((readw(reg) & ~mask) | val, reg);
- break;
- case 32:
- writel((readl(reg) & ~mask) | val, reg);
- break;
- default:
- dev_warn(dev, "unsupported register width %i\n",
- pdata->width);
- continue;
- }
+ single_write(dev, (single_read(dev, reg) & ~mask) | val, reg);
dev_dbg(dev, " reg/val %pa/0x%08x\n", ®, val);
}
return 0;
@@ -196,6 +207,16 @@ static int single_of_to_plat(struct udevice *dev)
return ret;
}
+ switch (pdata->width) {
+ case 8:
+ case 16:
+ case 32:
+ break;
+ default:
+ dev_err(dev, "wrong register width\n");
+ return -EINVAL;
+ }
+
addr = dev_read_addr_size(dev, "reg", &size);
if (addr == FDT_ADDR_T_NONE) {
dev_err(dev, "failed to get base register size\n");
--
2.17.1
More information about the U-Boot
mailing list