[PATCH v2] doc: board: freescale: imx8mp_evk: update to newer versions and change ATF_LOAD_ADDR

[Peter Bergin]

Hi Fabio,

On 2021-02-23 00:10, Fabio Estevam wrote:
> Hi Peter,
>
> On Sun, Feb 14, 2021 at 4:20 PM Peter Bergin <peter at berginkonsult.se> wrote:
>> Update imx-atf and firmware-imx to latest released versions.
>>
>> Update address of ATF_LOAD_ADDR that has changed to 0x970000 in imx-atf
>> commit 48733cb4e773a7584ced601de9d717efa3d73815.
>>
>> Add 'O=' to make and build in separate directory as one issue has been noticed
>> where it was trouble building directly inside u-boot source dir. Restructure the workflow
> What build issue do you see?

You can find more info in this thread 
https://lists.denx.de/pipermail/u-boot/2021-February/441103.html

It is not a build issue it is a boot issue. But caused at build time as 
in some way the produced binary is different in some way.

> We don't pass 'O=' option on any other i.MX board. Why do we need to
> do this with this board?

It solved my problem. I should spend more time and dig down further to 
see the real issue, haven't had time for it yet. When I reproduced the 
issue I had boot problem all the time I built in u-boot and no issues 
when I built in a separate build directory.

Regards,
/Peter