[PATCH 42/57] ppc: Remove T1040RDB boards
Tom Rini
trini at konsulko.com
Sun Feb 21 02:06:19 CET 2021
These boards have not been converted to CONFIG_DM_MMC by the deadline.
Remove them.
Cc: Priyanka Jain <priyanka.jain at nxp.com>
Cc: Ruchika Gupta <ruchika.gupta at nxp.com>
Cc: Sumit Garg <sumit.garg at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 19 -
arch/powerpc/include/asm/fsl_secure_boot.h | 2 -
board/freescale/t104xrdb/Kconfig | 16 -
board/freescale/t104xrdb/MAINTAINERS | 38 -
board/freescale/t104xrdb/Makefile | 16 -
board/freescale/t104xrdb/README | 386 ---------
board/freescale/t104xrdb/cpld.c | 115 ---
board/freescale/t104xrdb/cpld.h | 46 -
board/freescale/t104xrdb/ddr.c | 146 ----
board/freescale/t104xrdb/ddr.h | 56 --
board/freescale/t104xrdb/diu.c | 84 --
board/freescale/t104xrdb/eth.c | 157 ----
board/freescale/t104xrdb/law.c | 31 -
board/freescale/t104xrdb/pci.c | 25 -
board/freescale/t104xrdb/spl.c | 141 ---
board/freescale/t104xrdb/t1040_nand_rcw.cfg | 7 -
board/freescale/t104xrdb/t1040_sd_rcw.cfg | 7 -
board/freescale/t104xrdb/t1040_spi_rcw.cfg | 7 -
board/freescale/t104xrdb/t1040d4_nand_rcw.cfg | 7 -
board/freescale/t104xrdb/t1040d4_sd_rcw.cfg | 7 -
board/freescale/t104xrdb/t1040d4_spi_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042_nand_rcw.cfg | 7 -
.../freescale/t104xrdb/t1042_pi_nand_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042_sd_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042_spi_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042d4_nand_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042d4_sd_rcw.cfg | 7 -
board/freescale/t104xrdb/t1042d4_spi_rcw.cfg | 7 -
board/freescale/t104xrdb/t104x_pbi.cfg | 36 -
board/freescale/t104xrdb/t104x_pbi_sb.cfg | 38 -
board/freescale/t104xrdb/t104xrdb.c | 164 ----
board/freescale/t104xrdb/t104xrdb.h | 12 -
board/freescale/t104xrdb/tlb.c | 131 ---
configs/T1040D4RDB_NAND_defconfig | 78 --
configs/T1040D4RDB_SDCARD_defconfig | 75 --
configs/T1040D4RDB_SECURE_BOOT_defconfig | 64 --
configs/T1040D4RDB_SPIFLASH_defconfig | 77 --
configs/T1040D4RDB_defconfig | 62 --
configs/T1040RDB_NAND_defconfig | 79 --
configs/T1040RDB_SDCARD_defconfig | 76 --
configs/T1040RDB_SECURE_BOOT_defconfig | 65 --
configs/T1040RDB_SPIFLASH_defconfig | 78 --
configs/T1040RDB_defconfig | 63 --
configs/T1042D4RDB_NAND_defconfig | 86 --
configs/T1042D4RDB_SDCARD_defconfig | 83 --
configs/T1042D4RDB_SECURE_BOOT_defconfig | 63 --
configs/T1042D4RDB_SPIFLASH_defconfig | 85 --
configs/T1042D4RDB_defconfig | 71 --
.../T1042RDB_PI_NAND_SECURE_BOOT_defconfig | 84 --
configs/T1042RDB_PI_NAND_defconfig | 79 --
configs/T1042RDB_PI_SDCARD_defconfig | 76 --
configs/T1042RDB_PI_SPIFLASH_defconfig | 78 --
configs/T1042RDB_PI_defconfig | 63 --
configs/T1042RDB_SECURE_BOOT_defconfig | 64 --
configs/T1042RDB_defconfig | 62 --
include/configs/T104xRDB.h | 806 ------------------
58 files changed, 4181 deletions(-)
delete mode 100644 board/freescale/t104xrdb/Kconfig
delete mode 100644 board/freescale/t104xrdb/MAINTAINERS
delete mode 100644 board/freescale/t104xrdb/Makefile
delete mode 100644 board/freescale/t104xrdb/README
delete mode 100644 board/freescale/t104xrdb/cpld.c
delete mode 100644 board/freescale/t104xrdb/cpld.h
delete mode 100644 board/freescale/t104xrdb/ddr.c
delete mode 100644 board/freescale/t104xrdb/ddr.h
delete mode 100644 board/freescale/t104xrdb/diu.c
delete mode 100644 board/freescale/t104xrdb/eth.c
delete mode 100644 board/freescale/t104xrdb/law.c
delete mode 100644 board/freescale/t104xrdb/pci.c
delete mode 100644 board/freescale/t104xrdb/spl.c
delete mode 100644 board/freescale/t104xrdb/t1040_nand_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1040_sd_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1040_spi_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042_nand_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042_sd_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042_spi_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
delete mode 100644 board/freescale/t104xrdb/t104x_pbi.cfg
delete mode 100644 board/freescale/t104xrdb/t104x_pbi_sb.cfg
delete mode 100644 board/freescale/t104xrdb/t104xrdb.c
delete mode 100644 board/freescale/t104xrdb/t104xrdb.h
delete mode 100644 board/freescale/t104xrdb/tlb.c
delete mode 100644 configs/T1040D4RDB_NAND_defconfig
delete mode 100644 configs/T1040D4RDB_SDCARD_defconfig
delete mode 100644 configs/T1040D4RDB_SECURE_BOOT_defconfig
delete mode 100644 configs/T1040D4RDB_SPIFLASH_defconfig
delete mode 100644 configs/T1040D4RDB_defconfig
delete mode 100644 configs/T1040RDB_NAND_defconfig
delete mode 100644 configs/T1040RDB_SDCARD_defconfig
delete mode 100644 configs/T1040RDB_SECURE_BOOT_defconfig
delete mode 100644 configs/T1040RDB_SPIFLASH_defconfig
delete mode 100644 configs/T1040RDB_defconfig
delete mode 100644 configs/T1042D4RDB_NAND_defconfig
delete mode 100644 configs/T1042D4RDB_SDCARD_defconfig
delete mode 100644 configs/T1042D4RDB_SECURE_BOOT_defconfig
delete mode 100644 configs/T1042D4RDB_SPIFLASH_defconfig
delete mode 100644 configs/T1042D4RDB_defconfig
delete mode 100644 configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
delete mode 100644 configs/T1042RDB_PI_NAND_defconfig
delete mode 100644 configs/T1042RDB_PI_SDCARD_defconfig
delete mode 100644 configs/T1042RDB_PI_SPIFLASH_defconfig
delete mode 100644 configs/T1042RDB_PI_defconfig
delete mode 100644 configs/T1042RDB_SECURE_BOOT_defconfig
delete mode 100644 configs/T1042RDB_defconfig
delete mode 100644 include/configs/T104xRDB.h
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 870ab800e86b..565b311f39ac 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -148,24 +148,6 @@ config TARGET_T1024RDB
imply CMD_EEPROM
imply PANIC_HANG
-config TARGET_T1040RDB
- bool "Support T1040RDB"
- select ARCH_T1040
- select BOARD_LATE_INIT if CHAIN_OF_TRUST
- select SUPPORT_SPL
- select PHYS_64BIT
- imply CMD_SATA
- imply PANIC_HANG
-
-config TARGET_T1040D4RDB
- bool "Support T1040D4RDB"
- select ARCH_T1040
- select BOARD_LATE_INIT if CHAIN_OF_TRUST
- select SUPPORT_SPL
- select PHYS_64BIT
- imply CMD_SATA
- imply PANIC_HANG
-
config TARGET_T1042RDB
bool "Support T1042RDB"
select ARCH_T1042
@@ -1439,7 +1421,6 @@ source "board/freescale/p1_p2_rdb_pc/Kconfig"
source "board/freescale/p2041rdb/Kconfig"
source "board/freescale/qemu-ppce500/Kconfig"
source "board/freescale/t102xrdb/Kconfig"
-source "board/freescale/t104xrdb/Kconfig"
source "board/freescale/t208xqds/Kconfig"
source "board/freescale/t208xrdb/Kconfig"
source "board/freescale/t4rdb/Kconfig"
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 035bf1246766..0e2787076d87 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -26,8 +26,6 @@
defined(CONFIG_TARGET_T2080QDS) || \
defined(CONFIG_TARGET_T2080RDB) || \
defined(CONFIG_TARGET_T1040QDS) || \
- defined(CONFIG_TARGET_T1040RDB) || \
- defined(CONFIG_TARGET_T1040D4RDB) || \
defined(CONFIG_TARGET_T1042RDB) || \
defined(CONFIG_TARGET_T1042D4RDB) || \
defined(CONFIG_TARGET_T1042RDB_PI) || \
diff --git a/board/freescale/t104xrdb/Kconfig b/board/freescale/t104xrdb/Kconfig
deleted file mode 100644
index e6e46fa126fb..000000000000
--- a/board/freescale/t104xrdb/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-if TARGET_T1040RDB || TARGET_T1040D4RDB || \
- TARGET_T1042RDB || TARGET_T1042D4RDB || \
- TARGET_T1042RDB_PI
-
-config SYS_BOARD
- default "t104xrdb"
-
-config SYS_VENDOR
- default "freescale"
-
-config SYS_CONFIG_NAME
- default "T104xRDB"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS
deleted file mode 100644
index 8e3267917fd6..000000000000
--- a/board/freescale/t104xrdb/MAINTAINERS
+++ /dev/null
@@ -1,38 +0,0 @@
-T104XRDB BOARD
-M: Priyanka Jain <priyanka.jain at nxp.com>
-S: Maintained
-F: board/freescale/t104xrdb/
-F: include/configs/T104xRDB.h
-F: configs/T1040RDB_defconfig
-F: configs/T1040RDB_NAND_defconfig
-F: configs/T1040RDB_SPIFLASH_defconfig
-F: configs/T1040D4RDB_defconfig
-F: configs/T1040D4RDB_NAND_defconfig
-F: configs/T1040D4RDB_SPIFLASH_defconfig
-F: configs/T1042RDB_defconfig
-F: configs/T1042D4RDB_defconfig
-F: configs/T1042D4RDB_NAND_defconfig
-F: configs/T1042D4RDB_SPIFLASH_defconfig
-F: configs/T1042RDB_PI_defconfig
-F: configs/T1042RDB_PI_NAND_defconfig
-F: configs/T1042RDB_PI_SPIFLASH_defconfig
-
-T1040RDB_SDCARD BOARD
-M: Priyanka Jain <priyanka.jain at nxp.com>
-S: Maintained
-F: configs/T1040RDB_SDCARD_defconfig
-F: configs/T1040D4RDB_SDCARD_defconfig
-F: configs/T1042D4RDB_SDCARD_defconfig
-F: configs/T1042RDB_PI_SDCARD_defconfig
-
-T1040RDB_SECURE_BOOT BOARD
-M: Ruchika Gupta <ruchika.gupta at nxp.com>
-S: Maintained
-F: configs/T1040RDB_SECURE_BOOT_defconfig
-F: configs/T1040D4RDB_SECURE_BOOT_defconfig
-F: configs/T1042RDB_SECURE_BOOT_defconfig
-F: configs/T1042D4RDB_SECURE_BOOT_defconfig
-
-M: Sumit Garg <sumit.garg at nxp.com>
-S: Maintained
-F: configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile
deleted file mode 100644
index 31abbd9aca01..000000000000
--- a/board/freescale/t104xrdb/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2013 Freescale Semiconductor, Inc.
-
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-else
-obj-y += t104xrdb.o
-obj-y += cpld.o
-obj-y += eth.o
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_FSL_DIU_FB)+= diu.o
-endif
-obj-y += ddr.o
-obj-y += law.o
-obj-y += tlb.o
diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README
deleted file mode 100644
index 09cb98e33d6a..000000000000
--- a/board/freescale/t104xrdb/README
+++ /dev/null
@@ -1,386 +0,0 @@
-Overview
---------
-The T1040RDB is a Freescale reference board that hosts the T1040 SoC
-(and variants). Variants inclued T1042 presonality of T1040, in which
-case T1040RDB can also be called T1042RDB.
-
-The T1042RDB is a Freescale reference board that hosts the T1042 SoC
-(and variants). The board is similar to T1040RDB, T1040 is a reduced
-personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
-
-The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
-(a personality of T1040 SoC). The board is similar to T1040RDB but is
-designed specially with low power features targeted for Printing Image Market.
-
-The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
-The board is re-designed T1040RDB board with following changes :
- - Support of DDR4 memory and some enhancements
-
-The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC.
-The board is re-designed T1040RDB board with following changes :
- - Support of DDR4 memory
- - Support for 0x86 serdes protocol which can support following interfaces
- - 2 RGMII's on DTSEC4, DTSEC5
- - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
-
-Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
--------------------------------------------------------------------------
-Board Si Protocol Targeted Market
--------------------------------------------------------------------------
-T1040RDB T1040 0x66 Networking
-T1040RDB T1042 0x86 Networking
-T1042RDB_PI T1042 0x06 Printing & Imaging
-T1040D4RDB T1040 0x66 Networking
-T1042D4RDB T1042 0x86 Networking
-
-
-T1040 SoC Overview
-------------------
-The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
-processor cores with high-performance data path acceleration architecture
-and network peripheral interfaces required for networking & telecommunications.
-
-The T1040/T1042 SoC includes the following function and features:
-
- - Four e5500 cores, each with a private 256 KB L2 cache
- - 256 KB shared L3 CoreNet platform cache (CPC)
- - Interconnect CoreNet platform
- - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
- support
- - Data Path Acceleration Architecture (DPAA) incorporating acceleration
- for the following functions:
- - Packet parsing, classification, and distribution
- - Queue management for scheduling, packet sequencing, and congestion
- management
- - Cryptography Acceleration (SEC 5.0)
- - RegEx Pattern Matching Acceleration (PME 2.2)
- - IEEE Std 1588 support
- - Hardware buffer management for buffer allocation and deallocation
- - Ethernet interfaces
- - Integrated 8-port Gigabit Ethernet switch (T1040 only)
- - Four 1 Gbps Ethernet controllers
- - Two RGMII interfaces or one RGMII and one MII interfaces
- - High speed peripheral interfaces
- - Four PCI Express 2.0 controllers running at up to 5 GHz
- - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
- - Upto two QSGMII interface
- - Upto six SGMII interface supporting 1000 Mbps
- - One SGMII interface supporting upto 2500 Mbps
- - Additional peripheral interfaces
- - Two USB 2.0 controllers with integrated PHY
- - SD/eSDHC/eMMC
- - eSPI controller
- - Four I2C controllers
- - Four UARTs
- - Four GPIO controllers
- - Integrated flash controller (IFC)
- - LCD and HDMI interface (DIU) with 12 bit dual data rate
- - TDM interface
- - Multicore programmable interrupt controller (PIC)
- - Two 8-channel DMA engines
- - Single source clocking implementation
- - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
-
-T1040 SoC Personalities
--------------------------
-T1022 Personality:
-T1022 is a reduced personality of T1040 with less core/clusters.
-
-T1042 Personality:
-T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
-Ethernet switch. Rest of the blocks are same as T1040
-
-
-T1040RDB board Overview
--------------------------
- - SERDES Connections, 8 lanes information:
- 1: None
- 2: SGMII
- 3: QSGMII
- 4: QSGMII
- 5: PCIe1 x1 slot
- 6: mini PCIe connector
- 7: mini PCIe connector
- 8: SATA connector
- - DDR Controller
- - Supports rates of up to 1600 MHz data-rate
- - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
- - IFC/Local Bus
- - NAND flash: 1GB 8-bit NAND flash
- - NOR: 128MB 16-bit NOR Flash
- - Ethernet
- - Two on-board RGMII 10/100/1G ethernet ports.
- - CPLD
- - Clocks
- - System and DDR clock (SYSCLK, “DDRCLK”)
- - SERDES clocks
- - Power Supplies
- - USB
- - Supports two USB 2.0 ports with integrated PHYs
- - Two type A ports with 5V at 1.5A per port.
- - SDHC
- - SDHC/SDXC connector
- - SPI
- - On-board 64MB SPI flash
- - Other IO
- - Two Serial ports
- - Four I2C ports
-
-T1042RDB_PI board Overview
--------------------------
- - SERDES Connections, 8 lanes information:
- 1, 2, 3, 4 : PCIe x4 slot
- 5: mini PCIe connector
- 6: mini PCIe connector
- 7: NA
- 8: SATA connector
- - DDR Controller
- - Supports rates of up to 1600 MHz data-rate
- - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
- - IFC/Local Bus
- - NAND flash: 1GB 8-bit NAND flash
- - NOR: 128MB 16-bit NOR Flash
- - Ethernet
- - Two on-board RGMII 10/100/1G ethernet ports.
- - CPLD
- - Clocks
- - System and DDR clock (SYSCLK, “DDRCLK”)
- - SERDES clocks
- - Video
- - DIU supports video at up to 1280x1024x32bpp
- - Power Supplies
- - USB
- - Supports two USB 2.0 ports with integrated PHYs
- - Two type A ports with 5V at 1.5A per port.
- - SDHC
- - SDHC/SDXC connector
- - SPI
- - On-board 64MB SPI flash
- - Other IO
- - Two Serial ports
- - Four I2C ports
-
-Memory map
------------
-The addresses in brackets are physical addresses.
-
-Start Address End Address Description Size
-0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
-0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
-0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
-0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
-0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
-0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
-0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
-0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
-0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
-0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
-0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB
-0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB
-0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB
-0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
-0x0_0000_0000 0x0_ffff_ffff DDR 2GB
-
-
-NOR Flash memory Map
----------------------
- Start End Definition Size
-0xEFF40000 0xEFFFFFFF U-Boot (current bank) 768KB
-0xEFF20000 0xEFF3FFFF U-Boot env (current bank) 128KB
-0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
-0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
-0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
-0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
-0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
-0xEBF40000 0xEBFFFFFF U-Boot (alt bank) 768KB
-0xEBF20000 0xEBF3FFFF U-Boot env (alt bank) 128KB
-0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
-0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
-0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
-0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
-0xE8000000 0xE801FFFF RCW (current bank) 128KB
-
-
-Various Software configurations/environment variables/commands
---------------------------------------------------------------
-The below commands apply to the board
-
-1. U-Boot environment variable hwconfig
- The default hwconfig is:
- hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
- dr_mode=host,phy_type=utmi
- Note: For USB gadget set "dr_mode=peripheral"
-
-2. FMAN Ucode versions
- fsl_fman_ucode_t1040.bin
-
-3. Switching to alternate bank
- Commands for switching to alternate bank.
-
- 1. To change from vbank0 to vbank4
- => cpld reset altbank (it will boot using vbank4)
-
- 2.To change from vbank4 to vbank0
- => cpld reset (it will boot using vbank0)
-
-NAND boot with 2 Stage boot loader
-----------------------------------
-PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
-SPL further initialise DDR using SPD and environment variables and copy
-U-Boot(768 KB) from flash to DDR.
-Finally SPL transer control to U-Boot for futher booting.
-
-SPL has following features:
- - Executes within 256K
- - No relocation required
-
- Run time view of SPL framework during boot :-
- -----------------------------------------------
- Area | Address |
------------------------------------------------
- Secure boot | 0xFFFC0000 (32KB) |
- headers | |
- -----------------------------------------------
- GD, BD | 0xFFFC8000 (4KB) |
- -----------------------------------------------
- ENV | 0xFFFC9000 (8KB) |
- -----------------------------------------------
- HEAP | 0xFFFCB000 (30KB) |
- -----------------------------------------------
- STACK | 0xFFFD8000 (22KB) |
- -----------------------------------------------
- U-Boot SPL | 0xFFFD8000 (160KB) |
- -----------------------------------------------
-
-NAND Flash memory Map on T104xRDB
-------------------------------------------
- Start End Definition Size
-0x000000 0x0FFFFF U-Boot 1MB
-0x180000 0x19FFFF U-Boot env 128KB
-0x280000 0x29FFFF FMAN Ucode 128KB
-0x380000 0x39FFFF QE Firmware 128KB
-
-SD Card memory Map on T104xRDB
-------------------------------------------
- Block #blocks Definition Size
-0x008 2048 U-Boot 1MB
-0x800 0024 U-Boot env 8KB
-0x820 0256 FMAN Ucode 128KB
-0x920 0256 QE Firmware 128KB
-
-SPI Flash memory Map on T104xRDB
-------------------------------------------
- Start End Definition Size
-0x000000 0x0FFFFF U-Boot 1MB
-0x100000 0x101FFF U-Boot env 8KB
-0x110000 0x12FFFF FMAN Ucode 128KB
-0x130000 0x14FFFF QE Firmware 128KB
-
-Please note QE Firmware is only valid for T1040RDB
-
-
-Switch Settings for T104xRDB boards: (ON is 0, OFF is 1)
-==========================================================
-NOR boot SW setting:
-SW1: 00010011
-SW2: 10111011
-SW3: 11100001
-
-NAND boot SW setting:
-SW1: 10001000
-SW2: 00111011
-SW3: 11110001
-
-SPI boot SW setting:
-SW1: 00100010
-SW2: 10111011
-SW3: 11100001
-
-SD boot SW setting:
-SW1: 00100000
-SW2: 00111011
-SW3: 11100001
-
-Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1)
-=============================================================
-NOR boot SW setting:
-SW1: 00010011
-SW2: 10111001
-SW3: 11100001
-
-NAND boot SW setting:
-SW1: 10001000
-SW2: 00111001
-SW3: 11110001
-
-SPI boot SW setting:
-SW1: 00100010
-SW2: 10111001
-SW3: 11100001
-
-SD boot SW setting:
-SW1: 00100000
-SW2: 00111001
-SW3: 11100001
-
-PBL-based image generation
-==========================
-Changes only the required register bit in in PBI commands.
-
-Provides reference code which might needs some
-modification as per requirement.
-example:
-By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file
-which needs to be changed for SPI and SD.
-
-For SD-boot
-==============
-1. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files)
-
-example:
- RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
-
-Change
-66000002 40000002 ec027000 01000000
-to
-66000002 40000002 6c027000 01000000
-
-2. SD does not support flush so remove flush from pbl, make changes in
- tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
- with 0x091380c0
-
-For SPI-boot
-==============
-1. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files)
-
-example:
- RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
-
-Change
-66000002 40000002 ec027000 01000000
-to
-66000002 40000002 5c027000 01000000
-
-2. SPI does not support flush so remove flush from pbl, make changes in
- tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
- with 0x091380c0
-
-Device tree support and how to enable it for different configs
---------------------------------------------------------------
-Device tree support is available for t1042d4rdb for below mentioned boot,
-1. NOR Boot
-2. NAND Boot
-3. SD Boot
-4. SPIFLASH Boot
-
-To enable device tree support for other boot, below configs need to be
-enabled in relative defconfig file,
-1. CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" (Change default device tree name if required)
-2. CONFIG_OF_CONTROL
-3. CONFIG_MPC85XX_HAVE_RESET_VECTOR if reset vector is located at
- CONFIG_RESET_VECTOR_ADDRESS - 0xffc
-
-If device tree support is enabled in defconfig,
-1. use 'u-boot-with-dtb.bin' for NOR boot.
-2. use 'u-boot-with-spl-pbl.bin' for other boot.
diff --git a/board/freescale/t104xrdb/cpld.c b/board/freescale/t104xrdb/cpld.c
deleted file mode 100644
index ac34095f3b66..000000000000
--- a/board/freescale/t104xrdb/cpld.c
+++ /dev/null
@@ -1,115 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/**
- * Copyright 2014 Freescale Semiconductor
- *
- * This file provides support for the board-specific CPLD used on some Freescale
- * reference boards.
- *
- * The following macros need to be defined:
- *
- * CONFIG_SYS_CPLD_BASE-The virtual address of the base of the CPLD register map
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#include "cpld.h"
-
-u8 cpld_read(unsigned int reg)
-{
- void *p = (void *)CONFIG_SYS_CPLD_BASE;
-
- return in_8(p + reg);
-}
-
-void cpld_write(unsigned int reg, u8 value)
-{
- void *p = (void *)CONFIG_SYS_CPLD_BASE;
-
- out_8(p + reg, value);
-}
-
-/**
- * Set the boot bank to the alternate bank
- */
-void cpld_set_altbank(void)
-{
- u8 reg = CPLD_READ(flash_ctl_status);
-
- reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK;
-
- CPLD_WRITE(flash_ctl_status, reg);
- CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
-}
-
-/**
- * Set the boot bank to the default bank
- */
-void cpld_set_defbank(void)
-{
- u8 reg = CPLD_READ(flash_ctl_status);
-
- reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK;
-
- CPLD_WRITE(flash_ctl_status, reg);
- CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
-}
-
-#ifdef DEBUG
-static void cpld_dump_regs(void)
-{
- printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver));
- printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub));
- printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver));
- printf("sw_ver = 0x%02x\n", CPLD_READ(sw_ver));
- printf("reset_ctl1 = 0x%02x\n", CPLD_READ(reset_ctl1));
- printf("reset_ctl2 = 0x%02x\n", CPLD_READ(reset_ctl2));
- printf("int_status = 0x%02x\n", CPLD_READ(int_status));
- printf("flash_ctl_status = 0x%02x\n", CPLD_READ(flash_ctl_status));
- printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status));
-#if defined(CONFIG_TARGET_T1040D4D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
- printf("int_mask = 0x%02x\n", CPLD_READ(int_mask));
-#else
- printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status));
-#endif
- printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status));
- printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status));
- printf("boot_override = 0x%02x\n", CPLD_READ(boot_override));
- printf("boot_config1 = 0x%02x\n", CPLD_READ(boot_config1));
- printf("boot_config2 = 0x%02x\n", CPLD_READ(boot_config2));
- putc('\n');
-}
-#endif
-
-int do_cpld(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
-{
- int rc = 0;
-
- if (argc <= 1)
- return cmd_usage(cmdtp);
-
- if (strcmp(argv[1], "reset") == 0) {
- if (strcmp(argv[2], "altbank") == 0)
- cpld_set_altbank();
- else
- cpld_set_defbank();
-#ifdef DEBUG
- } else if (strcmp(argv[1], "dump") == 0) {
- cpld_dump_regs();
-#endif
- } else
- rc = cmd_usage(cmdtp);
-
- return rc;
-}
-
-U_BOOT_CMD(
- cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
- "Reset the board or alternate bank",
- "reset - hard reset to default bank\n"
- "cpld reset altbank - reset to alternate bank\n"
-#ifdef DEBUG
- "cpld dump - display the CPLD registers\n"
-#endif
- );
diff --git a/board/freescale/t104xrdb/cpld.h b/board/freescale/t104xrdb/cpld.h
deleted file mode 100644
index a816aef10a42..000000000000
--- a/board/freescale/t104xrdb/cpld.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/**
- * Copyright 2013 Freescale Semiconductor
- *
- * This file provides support for the ngPIXIS, a board-specific FPGA used on
- * some Freescale reference boards.
- */
-
-/*
- * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
- */
-struct cpld_data {
- u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */
- u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */
- u8 hw_ver; /* 0x02 - Hardware Revision Register */
- u8 sw_ver; /* 0x03 - Software Revision register */
- u8 res0[12]; /* 0x04 - 0x0F - not used */
- u8 reset_ctl1; /* 0x10 - Reset control Register1 */
- u8 reset_ctl2; /* 0x11 - Reset control Register2 */
- u8 int_status; /* 0x12 - Interrupt status Register */
- u8 flash_ctl_status; /* 0x13 - Flash control and status register */
- u8 fan_ctl_status; /* 0x14 - Fan control and status register */
-#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
- u8 int_mask; /* 0x15 - Interrupt mask Register */
-#else
- u8 led_ctl_status; /* 0x15 - LED control and status register */
-#endif
- u8 sfp_ctl_status; /* 0x16 - SFP control and status register */
- u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/
- u8 boot_override; /* 0x18 - Boot override register */
- u8 boot_config1; /* 0x19 - Boot config override register*/
- u8 boot_config2; /* 0x1A - Boot config override register*/
-} cpld_data_t;
-
-
-/* Pointer to the CPLD register set */
-
-u8 cpld_read(unsigned int reg);
-void cpld_write(unsigned int reg, u8 value);
-
-#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
-#define CPLD_WRITE(reg, value)\
- cpld_write(offsetof(struct cpld_data, reg), value)
-#define MISC_CTL_SG_SEL 0x80
-#define MISC_CTL_AURORA_SEL 0x02
-#define MISC_MUX_QE_TDM 0xc0
diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c
deleted file mode 100644
index 8351f7ce9db2..000000000000
--- a/board/freescale/t104xrdb/ddr.c
+++ /dev/null
@@ -1,146 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <init.h>
-#include <log.h>
-#include <asm/global_data.h>
-#include <asm/mmu.h>
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-#include <asm/mpc85xx_gpio.h>
-#include <linux/delay.h>
-#include "ddr.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
- ulong ddr_freq;
-
- if (ctrl_num > 1) {
- printf("Not supported controller number %d\n", ctrl_num);
- return;
- }
- if (!pdimm->n_ranks)
- return;
-
- pbsp = udimms[0];
-
- /* Get clk_adjust according to the board ddr
- * freqency and n_banks specified in board_specific_parameters table.
- */
- ddr_freq = get_ddr_freq(0) / 1000000;
- while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks &&
- (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
- if (ddr_freq <= pbsp->datarate_mhz_high) {
- popts->clk_adjust = pbsp->clk_adjust;
- popts->wrlvl_start = pbsp->wrlvl_start;
- popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
- popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
- goto found;
- }
- pbsp_highest = pbsp;
- }
- pbsp++;
- }
-
- if (pbsp_highest) {
- printf("Error: board specific timing not found\n");
- printf("for data rate %lu MT/s\n", ddr_freq);
- printf("Trying to use the highest speed (%u) parameters\n",
- pbsp_highest->datarate_mhz_high);
- popts->clk_adjust = pbsp_highest->clk_adjust;
- popts->wrlvl_start = pbsp_highest->wrlvl_start;
- popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
- popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
- } else {
- panic("DIMM is not supported by this board");
- }
-found:
- debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
- "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, "
- "wrlvl_ctrl_3 0x%x\n",
- pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
- pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
- pbsp->wrlvl_ctl_3);
-
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
-#ifdef CONFIG_SYS_FSL_DDR4
- popts->half_strength_driver_enable = 1;
- /* optimize cpo for erratum A-009942 */
- popts->cpo_sample = 0x59;
-#else
- popts->half_strength_driver_enable = 0;
-#endif
- /*
- * Write leveling override
- */
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
-
- /*
- * rtt and rtt_wr override
- */
- popts->rtt_override = 0;
-
- /* Enable ZQ calibration */
- popts->zq_en = 1;
-
- /* DHC_EN =1, ODT = 75 Ohm */
-#ifdef CONFIG_SYS_FSL_DDR4
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) |
- DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
-#else
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
- popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
-#endif
-}
-
-#if defined(CONFIG_DEEP_SLEEP)
-void board_mem_sleep_setup(void)
-{
- void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE;
-
- /* does not provide HW signals for power management */
- clrbits_8(cpld_base + 0x17, 0x40);
- /* Disable MCKE isolation */
- gpio_set_value(2, 0);
- udelay(1);
-}
-#endif
-
-int dram_init(void)
-{
- phys_size_t dram_size;
-
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
- puts("Initializing....using SPD\n");
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fsl_ddr_sdram_size();
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
-#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD)
- fsl_dp_resume();
-#endif
-
- gd->ram_size = dram_size;
-
- return 0;
-}
diff --git a/board/freescale/t104xrdb/ddr.h b/board/freescale/t104xrdb/ddr.h
deleted file mode 100644
index f9d667f6174b..000000000000
--- a/board/freescale/t104xrdb/ddr.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __DDR_H__
-#define __DDR_H__
-struct board_specific_parameters {
- u32 n_ranks;
- u32 datarate_mhz_high;
- u32 rank_gb;
- u32 clk_adjust;
- u32 wrlvl_start;
- u32 wrlvl_ctl_2;
- u32 wrlvl_ctl_3;
-};
-
-/*
- * These tables contain all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-
-static const struct board_specific_parameters udimm0[] = {
- /*
- * memory controller 0
- * num| hi| rank| clk| wrlvl | wrlvl
- * ranks| mhz| GB |adjst| start | ctl2
- */
-#ifdef CONFIG_SYS_FSL_DDR4
- {2, 1600, 4, 8, 6, 0x07090A0c, 0x0e0f100a},
- {1, 1600, 4, 8, 5, 0x0607080B, 0x0C0C0D09},
-#elif defined(CONFIG_SYS_FSL_DDR3)
- {2, 833, 4, 8, 6, 0x06060607, 0x08080807},
- {2, 833, 0, 8, 6, 0x06060607, 0x08080807},
- {2, 1350, 4, 8, 7, 0x0708080A, 0x0A0B0C09},
- {2, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09},
- {2, 1666, 4, 8, 7, 0x0808090B, 0x0C0D0E0A},
- {2, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A},
- {1, 833, 4, 8, 6, 0x06060607, 0x08080807},
- {1, 833, 0, 8, 6, 0x06060607, 0x08080807},
- {1, 1350, 4, 8, 7, 0x0708080A, 0x0A0B0C09},
- {1, 1350, 0, 8, 7, 0x0708080A, 0x0A0B0C09},
- {1, 1666, 4, 8, 7, 0x0808090B, 0x0C0D0E0A},
- {1, 1666, 0, 8, 7, 0x0808090B, 0x0C0D0E0A},
-#else
-#error DDR type not defined
-#endif
- {}
-};
-
-#endif
-
-static const struct board_specific_parameters *udimms[] = {
- udimm0,
-};
diff --git a/board/freescale/t104xrdb/diu.c b/board/freescale/t104xrdb/diu.c
deleted file mode 100644
index 25c8597202a2..000000000000
--- a/board/freescale/t104xrdb/diu.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- * Author: Priyanka Jain <Priyanka.Jain at freescale.com>
- */
-
-#include <clock_legacy.h>
-#include <asm/io.h>
-#include <common.h>
-#include <command.h>
-#include <fsl_diu_fb.h>
-#include <linux/ctype.h>
-#include <video_fb.h>
-
-#include "../common/diu_ch7301.h"
-
-#include "cpld.h"
-#include "t104xrdb.h"
-
-/*
- * DIU Area Descriptor
- *
- * Note that we need to byte-swap the value before it's written to the AD
- * register. So even though the registers don't look like they're in the same
- * bit positions as they are on the MPC8610, the same value is written to the
- * AD register on the MPC8610 and on the P1022.
- */
-#define AD_BYTE_F 0x10000000
-#define AD_ALPHA_C_SHIFT 25
-#define AD_BLUE_C_SHIFT 23
-#define AD_GREEN_C_SHIFT 21
-#define AD_RED_C_SHIFT 19
-#define AD_PIXEL_S_SHIFT 16
-#define AD_COMP_3_SHIFT 12
-#define AD_COMP_2_SHIFT 8
-#define AD_COMP_1_SHIFT 4
-#define AD_COMP_0_SHIFT 0
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
- unsigned long speed_ccb, temp;
- u32 pixval;
- int ret;
-
- speed_ccb = get_bus_freq(0);
- temp = 1000000000 / pixclock;
- temp *= 1000;
- pixval = speed_ccb / temp;
-
- /* Program HDMI encoder */
- ret = diu_set_dvi_encoder(temp);
- if (ret) {
- puts("Failed to set DVI encoder\n");
- return;
- }
-
- /* Program pixel clock */
- out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR,
- ((pixval << PXCK_BITS_START) & PXCK_MASK));
-
- /* enable clock*/
- out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR, PXCKEN_MASK |
- ((pixval << PXCK_BITS_START) & PXCK_MASK));
-}
-
-int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
-{
- u32 pixel_format;
- u8 sw;
-
- /*Configure Display ouput port as HDMI*/
- sw = CPLD_READ(sfp_ctl_status);
- CPLD_WRITE(sfp_ctl_status , sw & ~(CPLD_DIU_SEL_DFP));
-
- pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
- (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
- (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) |
- (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) |
- (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT));
-
- printf("DIU: Switching to monitor DVI @ %ux%u\n", xres, yres);
-
- return fsl_diu_init(xres, yres, pixel_format, 0);
-}
diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c
deleted file mode 100644
index b034f11d68aa..000000000000
--- a/board/freescale/t104xrdb/eth.c
+++ /dev/null
@@ -1,157 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/fsl_serdes.h>
-#include <asm/immap_85xx.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <malloc.h>
-#include <fsl_dtsec.h>
-#include <vsc9953.h>
-
-#include "../common/fman.h"
-
-int board_eth_init(struct bd_info *bis)
-{
-#ifdef CONFIG_FMAN_ENET
- struct memac_mdio_info memac_mdio_info;
- unsigned int i;
- int phy_addr = 0;
-#ifdef CONFIG_VSC9953
- phy_interface_t phy_int;
- struct mii_dev *bus;
-#endif
-
- printf("Initializing Fman\n");
-
- memac_mdio_info.regs =
- (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
- memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
- /* Register the real 1G MDIO bus */
- fm_memac_mdio_init(bis, &memac_mdio_info);
-
- /*
- * Program on board RGMII, SGMII PHY addresses.
- */
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- int idx = i - FM1_DTSEC1;
-
- switch (fm_info_get_enet_if(i)) {
-#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
- case PHY_INTERFACE_MODE_SGMII:
- /* T1040RDB & T1040D4RDB only supports SGMII on
- * DTSEC3
- */
- fm_info_set_phy_address(FM1_DTSEC3,
- CONFIG_SYS_SGMII1_PHY_ADDR);
- break;
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
- case PHY_INTERFACE_MODE_SGMII:
- /* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */
- if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i))
- fm_info_set_phy_address(i, 0);
- /* T1042RDB only supports SGMII on DTSEC3 */
- fm_info_set_phy_address(FM1_DTSEC3,
- CONFIG_SYS_SGMII1_PHY_ADDR);
- break;
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
- case PHY_INTERFACE_MODE_SGMII:
- /* T1042D4RDB supports SGMII on DTSEC1, DTSEC2
- * & DTSEC3
- */
- if (FM1_DTSEC1 == i)
- phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR;
- if (FM1_DTSEC2 == i)
- phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR;
- if (FM1_DTSEC3 == i)
- phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR;
- fm_info_set_phy_address(i, phy_addr);
- break;
-#endif
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_TXID:
- case PHY_INTERFACE_MODE_RGMII_RXID:
- case PHY_INTERFACE_MODE_RGMII_ID:
- if (FM1_DTSEC4 == i)
- phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR;
- if (FM1_DTSEC5 == i)
- phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR;
- fm_info_set_phy_address(i, phy_addr);
- break;
- case PHY_INTERFACE_MODE_QSGMII:
- fm_info_set_phy_address(i, 0);
- break;
- case PHY_INTERFACE_MODE_NONE:
- fm_info_set_phy_address(i, 0);
- break;
- default:
- printf("Fman1: DTSEC%u set to unknown interface %i\n",
- idx + 1, fm_info_get_enet_if(i));
- fm_info_set_phy_address(i, 0);
- break;
- }
- if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII ||
- fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NONE)
- fm_info_set_mdio(i, NULL);
- else
- fm_info_set_mdio(i,
- miiphy_get_dev_by_name(
- DEFAULT_FM_MDIO_NAME));
- }
-
-#ifdef CONFIG_VSC9953
- /* SerDes configured for QSGMII */
- if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) {
- for (i = 0; i < 4; i++) {
- bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
- phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i;
- phy_int = PHY_INTERFACE_MODE_QSGMII;
-
- vsc9953_port_info_set_mdio(i, bus);
- vsc9953_port_info_set_phy_address(i, phy_addr);
- vsc9953_port_info_set_phy_int(i, phy_int);
- vsc9953_port_enable(i);
- }
- }
- if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) {
- for (i = 4; i < 8; i++) {
- bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
- phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4;
- phy_int = PHY_INTERFACE_MODE_QSGMII;
-
- vsc9953_port_info_set_mdio(i, bus);
- vsc9953_port_info_set_phy_address(i, phy_addr);
- vsc9953_port_info_set_phy_int(i, phy_int);
- vsc9953_port_enable(i);
- }
- }
-
- /* Connect DTSEC1 to L2 switch if it doesn't have a PHY */
- if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0)
- vsc9953_port_enable(8);
-
- /* Connect DTSEC2 to L2 switch if it doesn't have a PHY */
- if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) {
- /* Enable L2 On MAC2 using SCFG */
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)
- CONFIG_SYS_MPC85xx_SCFG;
-
- out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) |
- (0x80000000));
- vsc9953_port_enable(9);
- }
-#endif
-
- cpu_eth_init(bis);
-#endif
-
- return pci_eth_init(bis);
-}
diff --git a/board/freescale/t104xrdb/law.c b/board/freescale/t104xrdb/law.c
deleted file mode 100644
index 0f6b71a8c22f..000000000000
--- a/board/freescale/t104xrdb/law.c
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-#ifdef CONFIG_MTD_NOR_FLASH
- SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
- SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
- SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
-#endif
-#ifdef CONFIG_SYS_CPLD_BASE_PHYS
- SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE_PHYS
- SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t104xrdb/pci.c b/board/freescale/t104xrdb/pci.c
deleted file mode 100644
index 1fd24027000f..000000000000
--- a/board/freescale/t104xrdb/pci.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <init.h>
-#include <pci.h>
-#include <asm/fsl_pci.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <asm/fsl_serdes.h>
-
-#if !defined(CONFIG_DM_PCI)
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-}
-
-void pci_of_setup(void *blob, struct bd_info *bd)
-{
- FT_FSL_PCI_SETUP;
-}
-#endif
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
deleted file mode 100644
index f5fe73e62dca..000000000000
--- a/board/freescale/t104xrdb/spl.c
+++ /dev/null
@@ -1,141 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/* Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <clock_legacy.h>
-#include <console.h>
-#include <env_internal.h>
-#include <init.h>
-#include <malloc.h>
-#include <ns16550.h>
-#include <nand.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-#include <asm/global_data.h>
-#include "../common/sleep.h"
-#include "../common/spl.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-phys_size_t get_effective_memsize(void)
-{
- return CONFIG_SYS_L3_SIZE;
-}
-
-unsigned long get_board_sys_clk(void)
-{
- return CONFIG_SYS_CLK_FREQ;
-}
-
-unsigned long get_board_ddr_clk(void)
-{
- return CONFIG_DDR_CLK_FREQ;
-}
-
-#define FSL_CORENET_CCSR_PORSR1_RCW_MASK 0xFF800000
-void board_init_f(ulong bootflag)
-{
- u32 plat_ratio, sys_clk, uart_clk;
-#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
- u32 porsr1, pinctl;
- u32 svr = get_svr();
-#endif
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
- if (IS_SVR_REV(svr, 1, 0)) {
- /*
- * There is T1040 SoC issue where NOR, FPGA are inaccessible
- * during NAND boot because IFC signals > IFC_AD7 are not
- * enabled. This workaround changes RCW source to make all
- * signals enabled.
- */
- porsr1 = in_be32(&gur->porsr1);
- pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK))
- | 0x24800000);
- out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000),
- pinctl);
- }
-#endif
-
- /* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
- memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
-
- /* Update GD pointer */
- gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
-
-#ifdef CONFIG_DEEP_SLEEP
- /* disable the console if boot from deep sleep */
- if (is_warm_boot())
- fsl_dp_disable_console();
-#endif
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("" : : : "memory");
-
- console_init_f();
-
- /* initialize selected port with appropriate baud rate */
- sys_clk = get_board_sys_clk();
- plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- uart_clk = sys_clk * plat_ratio / 2;
-
- ns16550_init((struct ns16550 *)CONFIG_SYS_NS16550_COM1,
- uart_clk / 16 / CONFIG_BAUDRATE);
-
- relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
- struct bd_info *bd;
-
- bd = (struct bd_info *)(gd + sizeof(gd_t));
- memset(bd, 0, sizeof(struct bd_info));
- gd->bd = bd;
-
- arch_cpu_init();
- get_clocks();
- mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
- CONFIG_SPL_RELOC_MALLOC_SIZE);
- gd->flags |= GD_FLG_FULL_MALLOC_INIT;
-
-#ifdef CONFIG_SPL_MMC_BOOT
- mmc_initialize(bd);
-#endif
-
- /* relocate environment function pointers etc. */
-#if defined(CONFIG_ENV_IS_IN_NAND) || defined(CONFIG_ENV_IS_IN_MMC) || \
- defined(CONFIG_ENV_IS_IN_SPI_FLASH)
-#ifdef CONFIG_SPL_NAND_BOOT
- nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
- (uchar *)SPL_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
- mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
- (uchar *)SPL_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_SPI_BOOT
- fsl_spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
- (uchar *)SPL_ENV_ADDR);
-#endif
- gd->env_addr = (ulong)(SPL_ENV_ADDR);
- gd->env_valid = ENV_VALID;
-#endif
-
- i2c_init_all();
-
- puts("\n\n");
-
- dram_init();
-
-#ifdef CONFIG_SPL_MMC_BOOT
- mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
- fsl_spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
- nand_boot();
-#endif
-}
diff --git a/board/freescale/t104xrdb/t1040_nand_rcw.cfg b/board/freescale/t104xrdb/t1040_nand_rcw.cfg
deleted file mode 100644
index 3300c184a1ad..000000000000
--- a/board/freescale/t104xrdb/t1040_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 80000002 e8106000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040_sd_rcw.cfg b/board/freescale/t104xrdb/t1040_sd_rcw.cfg
deleted file mode 100644
index fd3e8c5bbf59..000000000000
--- a/board/freescale/t104xrdb/t1040_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 80000002 68106000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040_spi_rcw.cfg b/board/freescale/t104xrdb/t1040_spi_rcw.cfg
deleted file mode 100644
index fccde5e01fea..000000000000
--- a/board/freescale/t104xrdb/t1040_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 80000002 58106000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg b/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
deleted file mode 100644
index c1034b3dfa3b..000000000000
--- a/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 40000002 ec027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg b/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
deleted file mode 100644
index e6f7585bb022..000000000000
--- a/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 40000002 6c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg b/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
deleted file mode 100644
index cde862dff5c3..000000000000
--- a/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x66
-0c18000e 0e000000 00000000 00000000
-66000002 40000002 5c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342580f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_nand_rcw.cfg b/board/freescale/t104xrdb/t1042_nand_rcw.cfg
deleted file mode 100644
index db4d52f397d8..000000000000
--- a/board/freescale/t104xrdb/t1042_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 80000002 ec027000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
deleted file mode 100644
index 57de89ad0e71..000000000000
--- a/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x06
-0c18000e 0e000000 00000000 00000000
-06000002 00400002 e8106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
deleted file mode 100644
index bbce9a36930b..000000000000
--- a/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x06
-0c18000e 0e000000 00000000 00000000
-06000002 00400002 68106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
deleted file mode 100644
index b1d8b4c65afd..000000000000
--- a/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x06
-0c18000e 0e000000 00000000 00000000
-06000002 00400002 58106000 01000000
-00000000 00000000 00000000 00030810
-00000000 01fe0a06 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_sd_rcw.cfg b/board/freescale/t104xrdb/t1042_sd_rcw.cfg
deleted file mode 100644
index d77bf189b227..000000000000
--- a/board/freescale/t104xrdb/t1042_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 80000002 6c027000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042_spi_rcw.cfg b/board/freescale/t104xrdb/t1042_spi_rcw.cfg
deleted file mode 100644
index e8a3ad128042..000000000000
--- a/board/freescale/t104xrdb/t1042_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 80000002 5c027000 01000000
-00000000 00000000 00000000 00032810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg b/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
deleted file mode 100644
index 9e0ee2795f87..000000000000
--- a/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 40000002 ec027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg b/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
deleted file mode 100644
index 9d9046d65494..000000000000
--- a/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 40000002 6c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg b/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
deleted file mode 100644
index f1ec98932f8e..000000000000
--- a/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-#PBL preamble and RCW header
-aa55aa55 010e0100
-# serdes protocol 0x86
-0c18000e 0e000000 00000000 00000000
-86000002 40000002 5c027000 01000000
-00000000 00000000 00000000 00030810
-00000000 0342500f 00000000 00000000
diff --git a/board/freescale/t104xrdb/t104x_pbi.cfg b/board/freescale/t104xrdb/t104x_pbi.cfg
deleted file mode 100644
index 51945b474894..000000000000
--- a/board/freescale/t104xrdb/t104x_pbi.cfg
+++ /dev/null
@@ -1,36 +0,0 @@
-#PBI commands
-#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed
-09250100 00000400
-09250108 00002000
-#Software Workaround for errata A-008007 to reset PVR register
-09000010 0000000b
-09000014 c0000000
-09000018 81d00017
-89020400 a1000000
-091380c0 000f0000
-89020400 00000000
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#Configure CPC1 as 256KB SRAM
-09010100 00000000
-09010104 fffc0007
-09010f00 081e000d
-09010000 80000000
-#Configure LAW for CPC1
-09000cd0 00000000
-09000cd4 fffc0000
-09000cd8 81000011
-#Configure alternate space
-09000010 00000000
-09000014 ff000000
-09000018 81000000
-#Configure SPI controller
-09110000 80000403
-09110020 2d170008
-09110024 00100008
-09110028 00100008
-0911002c 00100008
-#Flush PBL data
-091380c0 000FFFFF
diff --git a/board/freescale/t104xrdb/t104x_pbi_sb.cfg b/board/freescale/t104xrdb/t104x_pbi_sb.cfg
deleted file mode 100644
index 98dc8e4c240e..000000000000
--- a/board/freescale/t104xrdb/t104x_pbi_sb.cfg
+++ /dev/null
@@ -1,38 +0,0 @@
-#PBI commands
-#Software Workaround for errata A-007662 to train PCIe2 controller in Gen2 speed
-09250100 00000400
-09250108 00002000
-#Software Workaround for errata A-008007 to reset PVR register
-09000010 0000000b
-09000014 c0000000
-09000018 81d00017
-89020400 a1000000
-091380c0 000f0000
-89020400 00000000
-#Initialize CPC1
-09010000 00200400
-09138000 00000000
-091380c0 00000100
-#Configure CPC1 as 256KB SRAM
-09010100 00000000
-09010104 bffc0007
-09010f00 081e000d
-09010000 80000000
-#Configure LAW for CPC1
-09000cd0 00000000
-09000cd4 bffc0000
-09000cd8 81000011
-#Configure alternate space
-09000010 00000000
-09000014 bf000000
-09000018 81000000
-#Configure SPI controller
-09110000 80000403
-09110020 2d170008
-09110024 00100008
-09110028 00100008
-0911002c 00100008
-#Flush PBL data
-091380c0 000FFFFF
-090e0200 bffd0000
-091380c0 000FFFFF
diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c
deleted file mode 100644
index 780043483dff..000000000000
--- a/board/freescale/t104xrdb/t104xrdb.c
+++ /dev/null
@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <fdt_support.h>
-#include <hwconfig.h>
-#include <image.h>
-#include <init.h>
-#include <log.h>
-#include <netdev.h>
-#include <asm/global_data.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_fdt.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include "../common/sleep.h"
-#include "t104xrdb.h"
-#include "cpld.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- struct cpu_type *cpu = gd->arch.cpu;
- u8 sw;
-
-#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
- printf("Board: %sD4RDB\n", cpu->name);
-#else
- printf("Board: %sRDB\n", cpu->name);
-#endif
- printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
- CPLD_READ(hw_ver), CPLD_READ(sw_ver));
-
- sw = CPLD_READ(flash_ctl_status);
- sw = ((sw & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
-
- printf("vBank: %d\n", sw);
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
-#if defined(CONFIG_DEEP_SLEEP)
- if (is_warm_boot())
- fsl_dp_disable_console();
-#endif
-
- return 0;
-}
-
-int board_early_init_r(void)
-{
-#ifdef CONFIG_SYS_FLASH_BASE
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- int flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap Boot flash region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- if (flash_esel == -1) {
- /* very unlikely unless something is messed up */
- puts("Error: Could not find TLB for FLASH BASE\n");
- flash_esel = 2; /* give our best effort to continue */
- } else {
- /* invalidate existing TLB entry for flash */
- disable_tlb(flash_esel);
- }
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_256M, 1);
-#endif
- return 0;
-}
-
-int misc_init_r(void)
-{
- ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 srds_s1;
-
- srds_s1 = in_be32(&gur->rcwsr[4]) >> 24;
-
- printf("SERDES Reference : 0x%X\n", srds_s1);
-
- /* select SGMII*/
- if (srds_s1 == 0x86)
- CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
- MISC_CTL_SG_SEL);
-
- /* select SGMII and Aurora*/
- if (srds_s1 == 0x8E)
- CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
- MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL);
-
-#if defined(CONFIG_TARGET_T1040D4RDB)
- if (hwconfig("qe-tdm")) {
- CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) |
- MISC_MUX_QE_TDM);
- printf("QECSR : 0x%02x, mux to qe-tdm\n",
- CPLD_READ(sfp_ctl_status));
- }
- /* Mask all CPLD interrupt sources, except QSGMII interrupts */
- if (CPLD_READ(sw_ver) < 0x03) {
- debug("CPLD SW version 0x%02x doesn't support int_mask\n",
- CPLD_READ(sw_ver));
- } else {
- CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL &
- ~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2));
- }
-#endif
-
- return 0;
-}
-
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = env_get_bootm_low();
- size = env_get_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#ifdef CONFIG_PCI
- pci_of_setup(blob, bd);
-#endif
-
- fdt_fixup_liodn(blob);
-
-#ifdef CONFIG_HAS_FSL_DR_USB
- fsl_fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-#ifndef CONFIG_DM_ETH
- fdt_fixup_fman_ethernet(blob);
-#endif
-#endif
-
- if (hwconfig("qe-tdm"))
- fdt_del_diu(blob);
- return 0;
-}
diff --git a/board/freescale/t104xrdb/t104xrdb.h b/board/freescale/t104xrdb/t104xrdb.h
deleted file mode 100644
index 678724c7e2b1..000000000000
--- a/board/freescale/t104xrdb/t104xrdb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#ifndef __T104x_RDB_H__
-#define __T104x_RDB_H__
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, struct bd_info *bd);
-
-#endif
diff --git a/board/freescale/t104xrdb/tlb.c b/board/freescale/t104xrdb/tlb.c
deleted file mode 100644
index 9dcba7933ff9..000000000000
--- a/board/freescale/t104xrdb/tlb.c
+++ /dev/null
@@ -1,131 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
- /* TLB 0 - for temp stack in cache */
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
- SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
- CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 0, BOOKE_PAGESZ_4K, 0),
-
- /* TLB 1 */
- /* *I*** - Covers boot page */
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) && \
- !defined(CONFIG_NXP_ESBC)
- /*
- * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the
- * SRAM is at 0xfffc0000, it covered the 0xfffff000.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_256K, 1),
-
-#elif defined(CONFIG_NXP_ESBC) && defined(CONFIG_SPL_BUILD)
- /*
- * *I*G - L3SRAM. When L3 is used as 256K SRAM, in case of Secure Boot
- * the physical address of the SRAM is at 0xbffc0000,
- * and virtual address is 0xfffc0000
- */
-
- SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_VADDR,
- CONFIG_SYS_INIT_L3_ADDR,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_256K, 1),
-#else
- SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 0, BOOKE_PAGESZ_4K, 1),
-#endif
-
- /* *I*G* - CCSRBAR */
- SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 1, BOOKE_PAGESZ_16M, 1),
-
- /* *I*G* - Flash, localbus */
- /* This will be changed to *I*G* after relocation to RAM. */
- SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
- 0, 2, BOOKE_PAGESZ_256M, 1),
-
-#ifndef CONFIG_SPL_BUILD
- /* *I*G* - PCI */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 3, BOOKE_PAGESZ_1G, 1),
-
- /* *I*G* - PCI I/O */
- SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 4, BOOKE_PAGESZ_256K, 1),
-
- /* Bman/Qman */
-#ifdef CONFIG_SYS_BMAN_MEM_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 5, BOOKE_PAGESZ_16M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
- CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 6, BOOKE_PAGESZ_16M, 1),
-#endif
-#ifdef CONFIG_SYS_QMAN_MEM_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, 7, BOOKE_PAGESZ_16M, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
- CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 8, BOOKE_PAGESZ_16M, 1),
-#endif
-#endif
-#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 9, BOOKE_PAGESZ_4M, 1),
-#endif
-#ifdef CONFIG_SYS_NAND_BASE
- /*
- * *I*G - NAND
- * entry 14 and 15 has been used hard coded, they will be disabled
- * in cpu_init_f, so we use entry 16 for nand.
- */
- SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_64K, 1),
-#endif
-#ifdef CONFIG_SYS_CPLD_BASE
- SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
- MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 11, BOOKE_PAGESZ_256K, 1),
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
- 0, 12, BOOKE_PAGESZ_1G, 1),
- SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
- CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
- 0, 13, BOOKE_PAGESZ_1G, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/configs/T1040D4RDB_NAND_defconfig b/configs/T1040D4RDB_NAND_defconfig
deleted file mode 100644
index fadf07b49d83..000000000000
--- a/configs/T1040D4RDB_NAND_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_SDCARD_defconfig b/configs/T1040D4RDB_SDCARD_defconfig
deleted file mode 100644
index a56018e5b507..000000000000
--- a/configs/T1040D4RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_SECURE_BOOT_defconfig b/configs/T1040D4RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index 88d54fcb0fef..000000000000
--- a/configs/T1040D4RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_SPIFLASH_defconfig b/configs/T1040D4RDB_SPIFLASH_defconfig
deleted file mode 100644
index ed3a7bfa1d8a..000000000000
--- a/configs/T1040D4RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040D4RDB_defconfig b/configs/T1040D4RDB_defconfig
deleted file mode 100644
index d1c646ccd03b..000000000000
--- a/configs/T1040D4RDB_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_NAND_defconfig b/configs/T1040RDB_NAND_defconfig
deleted file mode 100644
index 2aeae95e7733..000000000000
--- a/configs/T1040RDB_NAND_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_SDCARD_defconfig b/configs/T1040RDB_SDCARD_defconfig
deleted file mode 100644
index 0a29e097c2f9..000000000000
--- a/configs/T1040RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_SECURE_BOOT_defconfig b/configs/T1040RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index ba660ea4863d..000000000000
--- a/configs/T1040RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_DM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_SPIFLASH_defconfig b/configs/T1040RDB_SPIFLASH_defconfig
deleted file mode 100644
index f162019ab3e7..000000000000
--- a/configs/T1040RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1040RDB_defconfig b/configs/T1040RDB_defconfig
deleted file mode 100644
index 119ad36ea9c7..000000000000
--- a/configs/T1040RDB_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_ETHSW=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig
deleted file mode 100644
index bdfd0ef71b71..000000000000
--- a/configs/T1042D4RDB_NAND_defconfig
+++ /dev/null
@@ -1,86 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig
deleted file mode 100644
index 9094327edeaa..000000000000
--- a/configs/T1042D4RDB_SDCARD_defconfig
+++ /dev/null
@@ -1,83 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T1042D4RDB_SECURE_BOOT_defconfig b/configs/T1042D4RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index ef097bab8979..000000000000
--- a/configs/T1042D4RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_DM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig
deleted file mode 100644
index bc59866b551e..000000000000
--- a/configs/T1042D4RDB_SPIFLASH_defconfig
+++ /dev/null
@@ -1,85 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig
deleted file mode 100644
index f968a448e927..000000000000
--- a/configs/T1042D4RDB_defconfig
+++ /dev/null
@@ -1,71 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb"
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042D4RDB=y
-CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_DM=y
-CONFIG_FSL_CAAM=y
-CONFIG_DM_I2C=y
-CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_DM_PCI=y
-CONFIG_DM_PCI_COMPAT=y
-CONFIG_PCIE_FSL=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
diff --git a/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig b/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
deleted file mode 100644
index 701257c25655..000000000000
--- a/configs/T1042RDB_PI_NAND_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=0
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_CRYPTO_SUPPORT=y
-CONFIG_SPL_HASH_SUPPORT=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_DM=y
-CONFIG_SPL_DM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_NAND_defconfig b/configs/T1042RDB_PI_NAND_defconfig
deleted file mode 100644
index 209078f11b43..000000000000
--- a/configs/T1042RDB_PI_NAND_defconfig
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x180000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_SDCARD_defconfig b/configs/T1042RDB_PI_SDCARD_defconfig
deleted file mode 100644
index bf1da4087b33..000000000000
--- a/configs/T1042RDB_PI_SDCARD_defconfig
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_SPIFLASH_defconfig b/configs/T1042RDB_PI_SPIFLASH_defconfig
deleted file mode 100644
index 3f4dd96b48f6..000000000000
--- a/configs/T1042RDB_PI_SPIFLASH_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x30001000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_PI_defconfig b/configs/T1042RDB_PI_defconfig
deleted file mode 100644
index 60fbb80bb88e..000000000000
--- a/configs/T1042RDB_PI_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB_PI=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_SECURE_BOOT_defconfig b/configs/T1042RDB_SECURE_BOOT_defconfig
deleted file mode 100644
index eb03ba61fd11..000000000000
--- a/configs/T1042RDB_SECURE_BOOT_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_NXP_ESBC=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB=y
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_DM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_RSA=y
-CONFIG_SPL_RSA=y
-CONFIG_RSA_SOFTWARE_EXP=y
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig
deleted file mode 100644
index 33bc8cba2ddc..000000000000
--- a/configs/T1042RDB_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T1042RDB=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_SILENT_CONSOLE=y
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_SYS_FSL_DDR3=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_VITESSE=y
-CONFIG_PHY_GIGE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
deleted file mode 100644
index aee00a86cfed..000000000000
--- a/include/configs/T104xRDB.h
+++ /dev/null
@@ -1,806 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor, Inc.
- * Copyright 2020 NXP
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*
- * T104x RDB board configuration file
- */
-#include <asm/config_mpc85xx.h>
-
-#ifdef CONFIG_RAMBOOT_PBL
-
-#ifndef CONFIG_NXP_ESBC
-#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
-#else
-#define CONFIG_SYS_FSL_PBL_PBI \
- $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi_sb.cfg
-#endif
-
-#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_PAD_TO 0x40000
-#define CONFIG_SPL_MAX_SIZE 0x28000
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_SKIP_RELOCATE
-#define CONFIG_SPL_COMMON_INIT_DDR
-#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
-#undef CONFIG_DM_I2C
-#endif
-#define RESET_VECTOR_OFFSET 0x27FFC
-#define BOOT_PAGE_OFFSET 0x27000
-
-#ifdef CONFIG_MTD_RAW_NAND
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
-/*
- * HDR would be appended at end of image and copied to DDR along
- * with U-Boot image.
- */
-#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + \
- CONFIG_U_BOOT_HDR_SIZE)
-#else
-#define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10)
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000
-#define CONFIG_SYS_NAND_U_BOOT_START 0x30000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10)
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_nand_rcw.cfg
-#endif
-#endif
-
-#ifdef CONFIG_SPIFLASH
-#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC
-#define CONFIG_SPL_SPI_FLASH_MINIMAL
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_spi_rcw.cfg
-#endif
-#endif
-
-#ifdef CONFIG_SDCARD
-#define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC
-#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000)
-#define CONFIG_SYS_MMC_U_BOOT_START (0x30000000)
-#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10)
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MPC85XX_NO_RESETVEC
-#endif
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB_PI
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1040D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
-#endif
-#ifdef CONFIG_TARGET_T1042D4RDB
-#define CONFIG_SYS_FSL_PBL_RCW \
-$(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
-#endif
-#endif
-
-#endif
-
-/* High Level Configuration Options */
-#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
-
-/* support deep sleep */
-#define CONFIG_DEEP_SLEEP
-
-#ifndef CONFIG_RESET_VECTOR_ADDRESS
-#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
-#endif
-
-#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
-#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS
-#define CONFIG_PCIE1 /* PCIE controller 1 */
-#define CONFIG_PCIE2 /* PCIE controller 2 */
-#define CONFIG_PCIE3 /* PCIE controller 3 */
-#define CONFIG_PCIE4 /* PCIE controller 4 */
-
-#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-
-#if defined(CONFIG_SPIFLASH)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#ifdef CONFIG_NXP_ESBC
-#define CONFIG_RAMBOOT_NAND
-#define CONFIG_BOOTSCRIPT_COPY_RAM
-#endif
-#endif
-
-#define CONFIG_SYS_CLK_FREQ 100000000
-#define CONFIG_DDR_CLK_FREQ 66666666
-
-/*
- * These can be toggled for performance analysis, otherwise use default.
- */
-#define CONFIG_SYS_CACHE_STASHING
-#define CONFIG_BACKSIDE_L2_CACHE
-#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
-#define CONFIG_BTB /* toggle branch predition */
-#define CONFIG_DDR_ECC
-#ifdef CONFIG_DDR_ECC
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
-#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
-#endif
-
-#define CONFIG_ENABLE_36BIT_PHYS
-
-/*
- * Config the L3 Cache as L3 SRAM
- */
-#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000
-/*
- * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence
- * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address
- * (CONFIG_SYS_INIT_L3_VADDR) will be different.
- */
-#define CONFIG_SYS_INIT_L3_VADDR 0xFFFC0000
-#define CONFIG_SYS_L3_SIZE 256 << 10
-#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_VADDR + 32 * 1024)
-#define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
-#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10)
-#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
-
-#define CONFIG_SYS_DCSRBAR 0xf0000000
-#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
-
-/*
- * DDR Setup
- */
-#define CONFIG_VERY_BIG_RAM
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR 1
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#define CONFIG_DDR_SPD
-
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#define SPD_EEPROM_ADDRESS 0x51
-
-#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
-
-/*
- * IFC Definitions
- */
-#define CONFIG_SYS_FLASH_BASE 0xe8000000
-#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
-
-#define CONFIG_SYS_NOR_CSPR_EXT (0xf)
-#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \
- CSPR_PORT_SIZE_16 | \
- CSPR_MSEL_NOR | \
- CSPR_V)
-#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
-
-/*
- * TDM Definition
- */
-#define T1040_TDM_QUIRK_CCSR_BASE 0xfe000000
-
-/* NOR Flash Timing Params */
-#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
-#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
- FTIM0_NOR_TEADC(0x5) | \
- FTIM0_NOR_TEAHC(0x5))
-#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
- FTIM1_NOR_TRAD_NOR(0x1A) |\
- FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
- FTIM2_NOR_TCH(0x4) | \
- FTIM2_NOR_TWPH(0x0E) | \
- FTIM2_NOR_TWP(0x1c))
-#define CONFIG_SYS_NOR_FTIM3 0x0
-
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
-
-/* CPLD on IFC */
-#define CPLD_LBMAP_MASK 0x3F
-#define CPLD_BANK_SEL_MASK 0x07
-#define CPLD_BANK_OVERRIDE 0x40
-#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */
-#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK0 */
-#define CPLD_LBMAP_RESET 0xFF
-#define CPLD_LBMAP_SHIFT 0x03
-
-#if defined(CONFIG_TARGET_T1042RDB_PI)
-#define CPLD_DIU_SEL_DFP 0x80
-#elif defined(CONFIG_TARGET_T1042D4RDB)
-#define CPLD_DIU_SEL_DFP 0xc0
-#endif
-
-#if defined(CONFIG_TARGET_T1040D4RDB)
-#define CPLD_INT_MASK_ALL 0xFF
-#define CPLD_INT_MASK_THERM 0x80
-#define CPLD_INT_MASK_DVI_DFP 0x40
-#define CPLD_INT_MASK_QSGMII1 0x20
-#define CPLD_INT_MASK_QSGMII2 0x10
-#define CPLD_INT_MASK_SGMI1 0x08
-#define CPLD_INT_MASK_SGMI2 0x04
-#define CPLD_INT_MASK_TDMR1 0x02
-#define CPLD_INT_MASK_TDMR2 0x01
-#endif
-
-#define CONFIG_SYS_CPLD_BASE 0xffdf0000
-#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
-#define CONFIG_SYS_CSPR2_EXT (0xf)
-#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
- | CSPR_PORT_SIZE_8 \
- | CSPR_MSEL_GPCM \
- | CSPR_V)
-#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024)
-#define CONFIG_SYS_CSOR2 0x0
-/* CPLD Timing parameters for IFC CS2 */
-#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
- FTIM0_GPCM_TEADC(0x0e) | \
- FTIM0_GPCM_TEAHC(0x0e))
-#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
- FTIM1_GPCM_TRAD(0x1f))
-#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
- FTIM2_GPCM_TCH(0x8) | \
- FTIM2_GPCM_TWP(0x1f))
-#define CONFIG_SYS_CS2_FTIM3 0x0
-
-/* NAND Flash on IFC */
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_BASE 0xff800000
-#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
-
-#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
-#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
- | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
- | CSPR_MSEL_NAND /* MSEL = NAND */ \
- | CSPR_V)
-#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
-
-#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
- | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
- | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
- | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
- | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
- | CSOR_NAND_SPRZ_224/* Spare size = 224 */ \
- | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
- FTIM0_NAND_TWP(0x18) | \
- FTIM0_NAND_TWCHT(0x07) | \
- FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
- FTIM1_NAND_TWBE(0x39) | \
- FTIM1_NAND_TRR(0x0e) | \
- FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
- FTIM2_NAND_TREH(0x0a) | \
- FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3 0x0
-
-#define CONFIG_SYS_NAND_DDR_LAW 11
-#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
-
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
-#else
-#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR_CSPR_EXT
-#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR
-#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
-#endif
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
-#else
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#endif
-
-#if defined(CONFIG_RAMBOOT_PBL)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_A008044
-#if defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_A008044_WORKAROUND
-#endif
-#endif
-
-#define CONFIG_HWCONFIG
-
-/* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000
-/* The assembler doesn't like typecast */
-#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
- ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
- CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
-#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-/* Serial Port - controlled on board with jumper J8
- * open - index 2
- * shorted - index 1
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
-#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
-#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
-
-#if defined(CONFIG_TARGET_T1042RDB_PI) || defined(CONFIG_TARGET_T1042D4RDB)
-/* Video */
-#define CONFIG_FSL_DIU_FB
-
-#ifdef CONFIG_FSL_DIU_FB
-#define CONFIG_FSL_DIU_CH7301
-#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000)
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#endif
-#endif
-
-/* I2C */
-#ifndef CONFIG_DM_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */
-#define CONFIG_SYS_FSL_I2C2_SPEED 400000
-#define CONFIG_SYS_FSL_I2C3_SPEED 400000
-#define CONFIG_SYS_FSL_I2C4_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
-#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
-#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000
-#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100
-#else
-#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
-#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
-#endif
-
-#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */
-/* I2C bus multiplexer */
-#define I2C_MUX_PCA_ADDR 0x70
-#define I2C_MUX_CH_DEFAULT 0x8
-
-#if defined(CONFIG_TARGET_T1042RDB_PI) || \
- defined(CONFIG_TARGET_T1040D4RDB) || \
- defined(CONFIG_TARGET_T1042D4RDB)
-/* LDI/DVI Encoder for display */
-#define CONFIG_SYS_I2C_LDI_ADDR 0x38
-#define CONFIG_SYS_I2C_DVI_ADDR 0x75
-#define CONFIG_SYS_I2C_DVI_BUS_NUM 0
-
-/*
- * RTC configuration
- */
-#define RTC
-#define CONFIG_RTC_DS1337 1
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-/*DVI encoder*/
-#define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75
-#endif
-
-/*
- * eSPI - Enhanced SPI
- */
-
-/*
- * General PCI
- * Memory space is mapped 1-1, but I/O space must start from 0.
- */
-
-#ifdef CONFIG_PCI
-/* controller 1, direct to uli, tgtid 3, Base address 20000 */
-#ifdef CONFIG_PCIE1
-#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
-#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
-#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
-#endif
-
-/* controller 2, Slot 2, tgtid 2, Base address 201000 */
-#ifdef CONFIG_PCIE2
-#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull
-#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
-#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
-#endif
-
-/* controller 3, Slot 1, tgtid 1, Base address 202000 */
-#ifdef CONFIG_PCIE3
-#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000
-#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull
-#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
-#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
-#endif
-
-/* controller 4, Base address 203000 */
-#ifdef CONFIG_PCIE4
-#define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000
-#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull
-#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000
-#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
-#endif
-
-#if !defined(CONFIG_DM_PCI)
-#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
-#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
-#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
-#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
-#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
-#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
-#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#endif
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#endif /* CONFIG_PCI */
-
-/* SATA */
-#define CONFIG_FSL_SATA_V2
-#ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_SATA1
-#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
-#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
-
-#define CONFIG_LBA48
-#endif
-
-/*
-* USB
-*/
-#define CONFIG_HAS_FSL_DR_USB
-
-#ifdef CONFIG_HAS_FSL_DR_USB
-#ifdef CONFIG_USB_EHCI_HCD
-#define CONFIG_USB_EHCI_FSL
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#endif
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
-#endif
-
-/* Qman/Bman */
-#ifndef CONFIG_NOBQFMAN
-#define CONFIG_SYS_BMAN_NUM_PORTALS 10
-#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
-#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
-#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
-#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000
-#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000
-#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE
-#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \
- CONFIG_SYS_BMAN_CENA_SIZE)
-#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08
-#define CONFIG_SYS_QMAN_NUM_PORTALS 10
-#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
-#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
-#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
-#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000
-#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000
-#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE
-#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \
- CONFIG_SYS_QMAN_CENA_SIZE)
-#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
-#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08
-
-#define CONFIG_SYS_DPAA_FMAN
-#define CONFIG_SYS_DPAA_PME
-
-#define CONFIG_U_QE
-
-/* Default address of microcode for the Linux Fman driver */
-#if defined(CONFIG_SPIFLASH)
-/*
- * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
- * env, so we got 0x110000.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
-#elif defined(CONFIG_SDCARD)
-/*
- * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
- * about 1MB (2048 blocks), Env is stored after the image, and the env size is
- * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080.
- */
-#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_FMAN_FW_ADDR (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
-#endif
-
-#if defined(CONFIG_SPIFLASH)
-#define CONFIG_SYS_QE_FW_ADDR 0x130000
-#elif defined(CONFIG_SDCARD)
-#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920)
-#elif defined(CONFIG_MTD_RAW_NAND)
-#define CONFIG_SYS_QE_FW_ADDR (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
-#else
-#define CONFIG_SYS_QE_FW_ADDR 0xEFF10000
-#endif
-
-#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
-#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
-#endif /* CONFIG_NOBQFMAN */
-
-#ifdef CONFIG_FMAN_ENET
-#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB)
-#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03
-#elif defined(CONFIG_TARGET_T1040D4RDB)
-#define CONFIG_SYS_SGMII1_PHY_ADDR 0x01
-#elif defined(CONFIG_TARGET_T1042D4RDB)
-#define CONFIG_SYS_SGMII1_PHY_ADDR 0x02
-#define CONFIG_SYS_SGMII2_PHY_ADDR 0x03
-#define CONFIG_SYS_SGMII3_PHY_ADDR 0x01
-#endif
-
-#if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
-#define CONFIG_SYS_RGMII1_PHY_ADDR 0x04
-#define CONFIG_SYS_RGMII2_PHY_ADDR 0x05
-#else
-#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01
-#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02
-#endif
-
-/* Enable VSC9953 L2 Switch driver on T1040 SoC */
-#if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
-#define CONFIG_VSC9953
-#ifdef CONFIG_TARGET_T1040RDB
-#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04
-#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08
-#else
-#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x08
-#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c
-#endif
-#endif
-
-#define CONFIG_ETHPRIME "FM1 at DTSEC4"
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_LOADS_ECHO /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 64 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
-#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
-
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Dynamic MTD Partition support with mtdparts
- */
-
-/*
- * Environment Configuration
- */
-#define CONFIG_ROOTPATH "/opt/nfsroot"
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR 1000000
-
-#define __USB_PHY_TYPE utmi
-#define RAMDISKFILE "t104xrdb/ramdisk.uboot"
-
-#ifdef CONFIG_TARGET_T1040RDB
-#define FDTFILE "t1040rdb/t1040rdb.dtb"
-#elif defined(CONFIG_TARGET_T1042RDB_PI)
-#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb"
-#elif defined(CONFIG_TARGET_T1042RDB)
-#define FDTFILE "t1042rdb/t1042rdb.dtb"
-#elif defined(CONFIG_TARGET_T1040D4RDB)
-#define FDTFILE "t1042rdb/t1040d4rdb.dtb"
-#elif defined(CONFIG_TARGET_T1042D4RDB)
-#define FDTFILE "t1042rdb/t1042d4rdb.dtb"
-#endif
-
-#ifdef CONFIG_FSL_DIU_FB
-#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32 at 60,monitor=dvi"
-#else
-#define DIU_ENVIRONMENT
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:bank_intlv=cs0_cs1;" \
- "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
- "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
- "netdev=eth0\0" \
- "video-mode=" __stringify(DIU_ENVIRONMENT) "\0" \
- "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
- "tftpflash=tftpboot $loadaddr $uboot && " \
- "protect off $ubootaddr +$filesize && " \
- "erase $ubootaddr +$filesize && " \
- "cp.b $loadaddr $ubootaddr $filesize && " \
- "protect on $ubootaddr +$filesize && " \
- "cmp.b $loadaddr $ubootaddr $filesize\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=2000000\0" \
- "ramdiskfile=" __stringify(RAMDISKFILE) "\0" \
- "fdtaddr=1e00000\0" \
- "fdtfile=" __stringify(FDTFILE) "\0" \
- "bdev=sda3\0"
-
-#define CONFIG_LINUX \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "setenv ramdiskaddr 0x02000000;" \
- "setenv fdtaddr 0x00c00000;" \
- "setenv loadaddr 0x1000000;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_HDBOOT \
- "setenv bootargs root=/dev/$bdev rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $fdtaddr $fdtfile;" \
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND CONFIG_LINUX
-
-#include <asm/fsl_secure_boot.h>
-
-#endif /* __CONFIG_H */
--
2.17.1
More information about the U-Boot
mailing list