[PATCH v4 5/5] board/km: add support for seli8 design based on nxp ls102x

[Tom Rini]

On Fri, Feb 05, 2021 at 06:06:15AM +0000, Aleksandar Gerasimovski wrote:

> The SELI8 design is a new tdm service unit card for Hitachi-Powergrids
> XMC and FOX product lines.
> 
> It is based on NXP LS1021 SoC and it provides following interfaces:
>  - IFC interface for NOR, NAND and external FPGA's
>  - 1 x RGMII ETH for debug purposes
>  - 2 x SGMII ETH for management communication via back-plane
>  - 1 x uQE HDLC for management communication via back-plane
>  - 1 x I2C for peripheral devices
>  - 1 x SPI for peripheral devices
>  - 1 x UART for debug logging
> 
> It is foreseen that the design will be later re-used for another XMC and
> FOX service cards with similar SoC requirements.
> 
> Signed-off-by: Rainer Boschung <rainer.boschung at hitachi-powergrids.com>
> Signed-off-by: Matteo Ghidoni <matteo.ghidoni at hitachi-powergrids.com>
> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski at hitachi-powergrids.com>

Reviewed-by: Tom Rini <trini at konsulko.com>

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210205/1d7cef7a/attachment.sig>