[PATCH u-boot-marvell v2 03/18] ddr: marvell: a38x: add ddr32 support

[Marek Behún]

From: Alex Leibovich <alexl at marvell.com>

commit 32800667b375ebd1f82120da0f3479b1cf52d96d upstream.

Required changes made for 32bit ddr support.
An update is made to the topology map, according to
bus_act_mask, set in the dram_port.c

Signed-off-by: Alex Leibovich <alexl at marvell.com>
Reviewed-by: Nadav Haklai <Nadav.Haklai at cavium.com>
Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin at cavium.com>
Signed-off-by: Marek Behún <marek.behun at nic.cz>
Tested-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
---
 drivers/ddr/marvell/a38x/mv_ddr_topology.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/ddr/marvell/a38x/mv_ddr_topology.c b/drivers/ddr/marvell/a38x/mv_ddr_topology.c
index 09840b1e70..f2cd7c0ef3 100644
--- a/drivers/ddr/marvell/a38x/mv_ddr_topology.c
+++ b/drivers/ddr/marvell/a38x/mv_ddr_topology.c
@@ -144,6 +144,9 @@ unsigned short mv_ddr_bus_bit_mask_get(void)
 	unsigned int octets_per_if_num = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE);
 
 	if (tm->cfg_src == MV_DDR_CFG_SPD) {
+		if (tm->bus_act_mask == BUS_MASK_32BIT)
+			tm->spd_data.byte_fields.byte_13.all_bits = MV_DDR_PRI_BUS_WIDTH_32;
+
 		enum mv_ddr_pri_bus_width pri_bus_width = mv_ddr_spd_pri_bus_width_get(&tm->spd_data);
 		enum mv_ddr_bus_width_ext bus_width_ext = mv_ddr_spd_bus_width_ext_get(&tm->spd_data);
 
@@ -151,7 +154,7 @@ unsigned short mv_ddr_bus_bit_mask_get(void)
 		case MV_DDR_PRI_BUS_WIDTH_16:
 			pri_and_ext_bus_width = BUS_MASK_16BIT;
 			break;
-		case MV_DDR_PRI_BUS_WIDTH_32:
+		case MV_DDR_PRI_BUS_WIDTH_32: /*each bit represents byte, so 0xf-is means 4 bytes-32 bit*/
 			pri_and_ext_bus_width = BUS_MASK_32BIT;
 			break;
 		case MV_DDR_PRI_BUS_WIDTH_64:
-- 
2.26.2