[PATCH 01/57] arm: Remove xfi3 board
Tom Rini
trini at konsulko.com
Sun Feb 21 02:05:38 CET 2021
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.
Cc: Marek Vasut <marek.vasut at gmail.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/mach-imx/mxs/Kconfig | 1 -
board/creative/xfi3/Kconfig | 15 ---
board/creative/xfi3/MAINTAINERS | 6 -
board/creative/xfi3/Makefile | 10 --
board/creative/xfi3/spl_boot.c | 133 -------------------
board/creative/xfi3/xfi3.c | 227 --------------------------------
configs/xfi3_defconfig | 43 ------
include/configs/xfi3.h | 39 ------
8 files changed, 474 deletions(-)
delete mode 100644 board/creative/xfi3/Kconfig
delete mode 100644 board/creative/xfi3/MAINTAINERS
delete mode 100644 board/creative/xfi3/Makefile
delete mode 100644 board/creative/xfi3/spl_boot.c
delete mode 100644 board/creative/xfi3/xfi3.c
delete mode 100644 configs/xfi3_defconfig
delete mode 100644 include/configs/xfi3.h
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index bcd8400af9c3..57e69927a88f 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -30,7 +30,6 @@ config SYS_SOC
source "board/olimex/mx23_olinuxino/Kconfig"
source "board/freescale/mx23evk/Kconfig"
source "board/sandisk/sansa_fuze_plus/Kconfig"
-source "board/creative/xfi3/Kconfig"
endif
diff --git a/board/creative/xfi3/Kconfig b/board/creative/xfi3/Kconfig
deleted file mode 100644
index 7b681cd81b04..000000000000
--- a/board/creative/xfi3/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_XFI3
-
-config SYS_BOARD
- default "xfi3"
-
-config SYS_VENDOR
- default "creative"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "xfi3"
-
-endif
diff --git a/board/creative/xfi3/MAINTAINERS b/board/creative/xfi3/MAINTAINERS
deleted file mode 100644
index fb8235a3295f..000000000000
--- a/board/creative/xfi3/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-XFI3 BOARD
-M: Marek Vasut <marek.vasut at gmail.com>
-S: Maintained
-F: board/creative/xfi3/
-F: include/configs/xfi3.h
-F: configs/xfi3_defconfig
diff --git a/board/creative/xfi3/Makefile b/board/creative/xfi3/Makefile
deleted file mode 100644
index 67d68dd6218d..000000000000
--- a/board/creative/xfi3/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-
-ifndef CONFIG_SPL_BUILD
-obj-y := xfi3.o
-else
-obj-y := spl_boot.o
-endif
diff --git a/board/creative/xfi3/spl_boot.c b/board/creative/xfi3/spl_boot.c
deleted file mode 100644
index 67c1e9801b9b..000000000000
--- a/board/creative/xfi3/spl_boot.c
+++ /dev/null
@@ -1,133 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Creative ZEN X-Fi3 setup
- *
- * Copyright (C) 2013 Marek Vasut <marex at denx.de>
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx23.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_EMI (MXS_PAD_1V8 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
- /* EMI */
- MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI,
-
- MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
-
- MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
- MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
-
- MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
- MX23_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD,
- MX23_PAD_LCD_RS__LCD_RS | MUX_CONFIG_LCD,
- MX23_PAD_LCD_WR__LCD_WR | MUX_CONFIG_LCD,
- MX23_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
- MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
- MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
-
- MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DETECT__GPIO_2_1 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP,
- MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
- MX23_PAD_GPMI_D07__GPIO_0_7 | MUX_CONFIG_SSP,
-
- MX23_PAD_GPMI_D00__SSP2_DATA0 | MUX_CONFIG_SSP,
- MX23_PAD_GPMI_D01__SSP2_DATA1 | MUX_CONFIG_SSP,
- MX23_PAD_GPMI_D02__SSP2_DATA2 | MUX_CONFIG_SSP,
- MX23_PAD_GPMI_D03__SSP2_DATA3 | MUX_CONFIG_SSP,
- MX23_PAD_GPMI_RDY1__SSP2_CMD | MUX_CONFIG_SSP,
- MX23_PAD_GPMI_WRN__SSP2_SCK | MUX_CONFIG_SSP,
-
- /* PWM -- FIXME */
- MX23_PAD_PWM2__GPIO_1_28 | MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP,
-};
-
-void mxs_adjust_memory_params(uint32_t *dram_vals)
-{
- /* mDDR configuration values */
- const uint32_t regs[] = {
- 0x01010001, 0x00010000, 0x01000000, 0x00000001,
- 0x00010101, 0x00000001, 0x00010000, 0x01000001,
- 0x01010000, 0x00000001, 0x07000200, 0x04070203,
- 0x02020002, 0x06070a02, 0x0d000201, 0x0305000d,
- 0x02080800, 0x19330f0a, 0x1f1f1c00, 0x020a1313,
- 0x03061323, 0x0000000a, 0x00080008, 0x00200020,
- 0x00200020, 0x00200020, 0x000003f7, 0x00000000,
- 0x00000000, 0x00000000, 0x00000020, 0x00000000,
- 0x001023cd, 0x20410010, 0x00006665, 0x00000000,
- 0x00000101, 0x00000001, 0x00000000, 0x00000000,
- };
- memcpy(dram_vals, regs, sizeof(regs));
-}
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
diff --git a/board/creative/xfi3/xfi3.c b/board/creative/xfi3/xfi3.c
deleted file mode 100644
index 2aa2435e49c2..000000000000
--- a/board/creative/xfi3/xfi3.c
+++ /dev/null
@@ -1,227 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Creative ZEN X-Fi3 board
- *
- * Copyright (C) 2013 Marek Vasut <marex at denx.de>
- *
- * Hardware investigation done by:
- *
- * Amaury Pouly <amaury.pouly at gmail.com>
- */
-
-#include <common.h>
-#include <errno.h>
-#include <init.h>
-#include <net.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx23.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/delay.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
-
- /* SSP0 clock at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-#ifdef CONFIG_CMD_MMC
-static int xfi3_mmc_cd(int id)
-{
- switch (id) {
- case 0:
- /* The SSP_DETECT is inverted on this board. */
- return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1);
- case 1:
- /* Phison bridge always present */
- return 1;
- default:
- return 0;
- }
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
- int ret;
-
- /* MicroSD slot */
- gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1);
- gpio_direction_output(MX23_PAD_GPMI_D07__GPIO_0_7, 0);
- ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd);
- if (ret)
- return ret;
-
- /* Phison SD-NAND bridge */
- ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd);
-
- return ret;
-}
-#endif
-
-#ifdef CONFIG_VIDEO_MXS
-static int mxsfb_write_byte(uint32_t payload, const unsigned int data)
-{
- struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
- const unsigned int timeout = 0x10000;
-
- if (mxs_wait_mask_clr(®s->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
- timeout))
- return -ETIMEDOUT;
-
- writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) |
- (1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET),
- ®s->hw_lcdif_transfer_count);
-
- writel(LCDIF_CTRL_DATA_SELECT | LCDIF_CTRL_RUN,
- ®s->hw_lcdif_ctrl_clr);
-
- if (data)
- writel(LCDIF_CTRL_DATA_SELECT, ®s->hw_lcdif_ctrl_set);
-
- writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set);
-
- if (mxs_wait_mask_clr(®s->hw_lcdif_lcdif_stat_reg, 1 << 29,
- timeout))
- return -ETIMEDOUT;
-
- writel(payload, ®s->hw_lcdif_data);
- return mxs_wait_mask_clr(®s->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
- timeout);
-}
-
-static void mxsfb_write_register(uint32_t reg, uint32_t data)
-{
- mxsfb_write_byte(reg, 0);
- mxsfb_write_byte(data, 1);
-}
-
-static const struct {
- uint8_t reg;
- uint8_t delay;
- uint16_t val;
-} lcd_regs[] = {
- { 0x01, 0, 0x001c },
- { 0x02, 0, 0x0100 },
- /* Writing 0x30 to reg. 0x03 flips the LCD */
- { 0x03, 0, 0x1038 },
- { 0x08, 0, 0x0808 },
- /* This can contain 0x111 to rotate the LCD. */
- { 0x0c, 0, 0x0000 },
- { 0x0f, 0, 0x0c01 },
- { 0x20, 0, 0x0000 },
- { 0x21, 30, 0x0000 },
- /* Wait 30 mS here */
- { 0x10, 0, 0x0a00 },
- { 0x11, 30, 0x1038 },
- /* Wait 30 mS here */
- { 0x12, 0, 0x1010 },
- { 0x13, 0, 0x0050 },
- { 0x14, 0, 0x4f58 },
- { 0x30, 0, 0x0000 },
- { 0x31, 0, 0x00db },
- { 0x32, 0, 0x0000 },
- { 0x33, 0, 0x0000 },
- { 0x34, 0, 0x00db },
- { 0x35, 0, 0x0000 },
- { 0x36, 0, 0x00af },
- { 0x37, 0, 0x0000 },
- { 0x38, 0, 0x00db },
- { 0x39, 0, 0x0000 },
- { 0x50, 0, 0x0000 },
- { 0x51, 0, 0x0705 },
- { 0x52, 0, 0x0e0a },
- { 0x53, 0, 0x0300 },
- { 0x54, 0, 0x0a0e },
- { 0x55, 0, 0x0507 },
- { 0x56, 0, 0x0000 },
- { 0x57, 0, 0x0003 },
- { 0x58, 0, 0x090a },
- { 0x59, 30, 0x0a09 },
- /* Wait 30 mS here */
- { 0x07, 30, 0x1017 },
- /* Wait 40 mS here */
- { 0x36, 0, 0x00af },
- { 0x37, 0, 0x0000 },
- { 0x38, 0, 0x00db },
- { 0x39, 0, 0x0000 },
- { 0x20, 0, 0x0000 },
- { 0x21, 0, 0x0000 },
-};
-
-void mxsfb_system_setup(void)
-{
- struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
- int i;
-
- /* Switch the LCDIF into System-Mode */
- writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DOTCLK_MODE |
- LCDIF_CTRL_BYPASS_COUNT, ®s->hw_lcdif_ctrl_clr);
-
- /* Restart the SmartLCD controller */
- mdelay(50);
- writel(1, ®s->hw_lcdif_ctrl1_set);
- mdelay(50);
- writel(1, ®s->hw_lcdif_ctrl1_clr);
- mdelay(50);
- writel(1, ®s->hw_lcdif_ctrl1_set);
- mdelay(50);
-
- /* Program the SmartLCD controller */
- writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, ®s->hw_lcdif_ctrl1_set);
-
- writel((0x03 << LCDIF_TIMING_CMD_HOLD_OFFSET) |
- (0x03 << LCDIF_TIMING_CMD_SETUP_OFFSET) |
- (0x03 << LCDIF_TIMING_DATA_HOLD_OFFSET) |
- (0x02 << LCDIF_TIMING_DATA_SETUP_OFFSET),
- ®s->hw_lcdif_timing);
-
- /*
- * OTM2201A init and configuration sequence.
- */
- for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) {
- mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val);
- if (lcd_regs[i].delay)
- mdelay(lcd_regs[i].delay);
- }
- /* Turn on Framebuffer Upload Mode */
- mxsfb_write_byte(0x22, 0);
-
- writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DATA_SELECT,
- ®s->hw_lcdif_ctrl_set);
-}
-#endif
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- /* Turn on PWM backlight */
- gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
-
- return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- usb_eth_initialize(bis);
- return 0;
-}
diff --git a/configs/xfi3_defconfig b/configs/xfi3_defconfig
deleted file mode 100644
index c49319c3c2f0..000000000000
--- a/configs/xfi3_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX23=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x4000
-CONFIG_SPL_TEXT_BASE=0x00001000
-CONFIG_TARGET_XFI3=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200n8 "
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NETCONSOLE=y
-CONFIG_MXS_GPIO=y
-CONFIG_MMC_MXS=y
-CONFIG_CONS_INDEX=0
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_ETHER=y
-CONFIG_USB_ETH_CDC=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/xfi3.h b/include/configs/xfi3.h
deleted file mode 100644
index 80849129b931..000000000000
--- a/include/configs/xfi3.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2013 Marek Vasut <marex at denx.de>
- */
-#ifndef __CONFIGS_XFI3_H__
-#define __CONFIGS_XFI3_H__
-
-/* U-Boot Commands */
-
-/* Memory configuration */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment */
-
-/* Booting Linux */
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* LCD */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_FONT_4X6
-#define CONFIG_VIDEO_MXS_MODE_SYSTEM
-#define CONFIG_SYS_BLACK_IN_WRITE
-#define LCD_BPP LCD_COLOR16
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#endif
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_XFI3_H__ */
--
2.17.1
More information about the U-Boot
mailing list