[PATCH u-boot-marvell v2 15/18] ddr: marvell: a38x: import code change from upstream

Marek Behún marek.behun at nic.cz
Fri Feb 19 17:11:23 CET 2021


commit 2bdd12dd68b1f8e27a03a3443ae49a09a14c18e4 upstream.

The commit mentioned above changes non-DDR3 stuff in upstream, but it
also changes code in ddr3_training.c.

Import this change to remain consistent with upstream.

Signed-off-by: Marek Behún <marek.behun at nic.cz>
Tested-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
---
 drivers/ddr/marvell/a38x/ddr3_training.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c
index 34cc170910..0358f6287a 100644
--- a/drivers/ddr/marvell/a38x/ddr3_training.c
+++ b/drivers/ddr/marvell/a38x/ddr3_training.c
@@ -143,6 +143,7 @@ static struct reg_data odpg_default_value[] = {
 	{0x15a4, 0x0, MASK_ALL_BITS},
 	{0x15a8, 0x0, MASK_ALL_BITS},
 	{0x15ac, 0x0, MASK_ALL_BITS},
+	{0x1600, 0x0, MASK_ALL_BITS},
 	{0x1604, 0x0, MASK_ALL_BITS},
 	{0x1608, 0x0, MASK_ALL_BITS},
 	{0x160c, 0x0, MASK_ALL_BITS},
@@ -1569,6 +1570,8 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type,
 		val = ((cl_mask_table[cl_value] & 0x1) << 2) |
 			((cl_mask_table[cl_value] & 0xe) << 3);
 
+		cs_mask[0] = 0xc;
+
 		CHECK_STATUS(ddr3_tip_write_mrs_cmd(dev_num, cs_mask, MR_CMD0,
 			val, (0x7 << 4) | (0x1 << 2)));
 
-- 
2.26.2



More information about the U-Boot mailing list