[ADDRESS CONVERTED] [PATCH 07/25] arm: Remove apx4devkit board
Lauri Hintsala
Lauri.Hintsala at silabs.com
Tue Feb 9 14:08:35 CET 2021
That's fine. apx4devkit is not under active development.
Best regards,
Lauri Hintsala
> On 9 Feb 2021, at 15.02, Tom Rini <trini at konsulko.com> wrote:
>
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
>
>
> This board has not been converted to CONFIG_DM_MMC by the deadline of
> v2019.04, which is almost two years ago. In addition there are other DM
> migrations it is also missing. Remove it.
>
> Cc: Lauri Hintsala <lauri.hintsala at bluegiga.com>
> Signed-off-by: Tom Rini <trini at konsulko.com>
> ---
> arch/arm/mach-imx/mxs/Kconfig | 4 -
> board/bluegiga/apx4devkit/Kconfig | 15 ---
> board/bluegiga/apx4devkit/MAINTAINERS | 6 -
> board/bluegiga/apx4devkit/Makefile | 10 --
> board/bluegiga/apx4devkit/apx4devkit.c | 142 -----------------------
> board/bluegiga/apx4devkit/spl_boot.c | 152 -------------------------
> configs/apx4devkit_defconfig | 50 --------
> include/configs/apx4devkit.h | 77 -------------
> 8 files changed, 456 deletions(-)
> delete mode 100644 board/bluegiga/apx4devkit/Kconfig
> delete mode 100644 board/bluegiga/apx4devkit/MAINTAINERS
> delete mode 100644 board/bluegiga/apx4devkit/Makefile
> delete mode 100644 board/bluegiga/apx4devkit/apx4devkit.c
> delete mode 100644 board/bluegiga/apx4devkit/spl_boot.c
> delete mode 100644 configs/apx4devkit_defconfig
> delete mode 100644 include/configs/apx4devkit.h
>
> diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
> index 6a6e6ebecf0b..40d74c93b305 100644
> --- a/arch/arm/mach-imx/mxs/Kconfig
> +++ b/arch/arm/mach-imx/mxs/Kconfig
> @@ -8,9 +8,6 @@ choice
> prompt "MX28 board select"
> optional
>
> -config TARGET_APX4DEVKIT
> - bool "Support apx4devkit"
> -
> config TARGET_BG0900
> bool "Support bg0900"
>
> @@ -28,7 +25,6 @@ endchoice
> config SYS_SOC
> default "mxs"
>
> -source "board/bluegiga/apx4devkit/Kconfig"
> source "board/liebherr/xea/Kconfig"
> source "board/ppcag/bg0900/Kconfig"
> source "board/schulercontrol/sc_sps_1/Kconfig"
> diff --git a/board/bluegiga/apx4devkit/Kconfig b/board/bluegiga/apx4devkit/Kconfig
> deleted file mode 100644
> index f327fa15cf07..000000000000
> --- a/board/bluegiga/apx4devkit/Kconfig
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -if TARGET_APX4DEVKIT
> -
> -config SYS_BOARD
> - default "apx4devkit"
> -
> -config SYS_VENDOR
> - default "bluegiga"
> -
> -config SYS_SOC
> - default "mxs"
> -
> -config SYS_CONFIG_NAME
> - default "apx4devkit"
> -
> -endif
> diff --git a/board/bluegiga/apx4devkit/MAINTAINERS b/board/bluegiga/apx4devkit/MAINTAINERS
> deleted file mode 100644
> index 286e9e9f063e..000000000000
> --- a/board/bluegiga/apx4devkit/MAINTAINERS
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -APX4DEVKIT BOARD
> -M: Lauri Hintsala <lauri.hintsala at bluegiga.com>
> -S: Maintained
> -F: board/bluegiga/apx4devkit/
> -F: include/configs/apx4devkit.h
> -F: configs/apx4devkit_defconfig
> diff --git a/board/bluegiga/apx4devkit/Makefile b/board/bluegiga/apx4devkit/Makefile
> deleted file mode 100644
> index 039d62dda2ad..000000000000
> --- a/board/bluegiga/apx4devkit/Makefile
> +++ /dev/null
> @@ -1,10 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0+
> -#
> -# (C) Copyright 2000-2006
> -# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
> -
> -ifndef CONFIG_SPL_BUILD
> -obj-y := apx4devkit.o
> -else
> -obj-y := spl_boot.o
> -endif
> diff --git a/board/bluegiga/apx4devkit/apx4devkit.c b/board/bluegiga/apx4devkit/apx4devkit.c
> deleted file mode 100644
> index 739f71f5c4d1..000000000000
> --- a/board/bluegiga/apx4devkit/apx4devkit.c
> +++ /dev/null
> @@ -1,142 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Bluegiga APX4 Development Kit
> - *
> - * Copyright (C) 2012 Bluegiga Technologies Oy
> - *
> - * Authors:
> - * Veli-Pekka Peltola <veli-pekka.peltola at bluegiga.com>
> - * Lauri Hintsala <lauri.hintsala at bluegiga.com>
> - *
> - * Based on m28evk.c:
> - * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
> - * on behalf of DENX Software Engineering GmbH
> - */
> -
> -#include <common.h>
> -#include <init.h>
> -#include <net.h>
> -#include <asm/gpio.h>
> -#include <asm/io.h>
> -#include <asm/setup.h>
> -#include <asm/arch/imx-regs.h>
> -#include <asm/arch/iomux-mx28.h>
> -#include <asm/arch/clock.h>
> -#include <asm/arch/sys_proto.h>
> -#include <env.h>
> -#include <linux/mii.h>
> -#include <miiphy.h>
> -#include <netdev.h>
> -#include <errno.h>
> -
> -DECLARE_GLOBAL_DATA_PTR;
> -
> -/* Functions */
> -int board_early_init_f(void)
> -{
> - /* IO0 clock at 480MHz */
> - mxs_set_ioclk(MXC_IOCLK0, 480000);
> - /* IO1 clock at 480MHz */
> - mxs_set_ioclk(MXC_IOCLK1, 480000);
> -
> - /* SSP0 clock at 96MHz */
> - mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
> -
> - return 0;
> -}
> -
> -int dram_init(void)
> -{
> - return mxs_dram_init();
> -}
> -
> -int board_init(void)
> -{
> - /* Adress of boot parameters */
> - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_CMD_MMC
> -int board_mmc_init(struct bd_info *bis)
> -{
> - return mxsmmc_initialize(bis, 0, NULL, NULL);
> -}
> -#endif
> -
> -
> -#ifdef CONFIG_CMD_NET
> -
> -#define MII_PHY_CTRL2 0x1f
> -int fecmxc_mii_postcall(int phy)
> -{
> - /* change PHY RMII clock to 50MHz */
> - miiphy_write("FEC", 0, MII_PHY_CTRL2, 0x8180);
> -
> - return 0;
> -}
> -
> -int board_eth_init(struct bd_info *bis)
> -{
> - int ret;
> - struct eth_device *dev;
> -
> - ret = cpu_eth_init(bis);
> - if (ret) {
> - printf("FEC MXS: Unable to init FEC clocks\n");
> - return ret;
> - }
> -
> - ret = fecmxc_initialize(bis);
> - if (ret) {
> - printf("FEC MXS: Unable to init FEC\n");
> - return ret;
> - }
> -
> - dev = eth_get_dev_by_name("FEC");
> - if (!dev) {
> - printf("FEC MXS: Unable to get FEC device entry\n");
> - return -EINVAL;
> - }
> -
> - ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> - if (ret) {
> - printf("FEC MXS: Unable to register FEC MII postcall\n");
> - return ret;
> - }
> -
> - return ret;
> -}
> -#endif
> -
> -#ifdef CONFIG_SERIAL_TAG
> -#define MXS_OCOTP_MAX_TIMEOUT 1000000
> -void get_board_serial(struct tag_serialnr *serialnr)
> -{
> - struct mxs_ocotp_regs *ocotp_regs =
> - (struct mxs_ocotp_regs *)MXS_OCOTP_BASE;
> -
> - serialnr->high = 0;
> - serialnr->low = 0;
> -
> - writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
> -
> - if (mxs_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
> - MXS_OCOTP_MAX_TIMEOUT)) {
> - printf("MXS: Can't get serial number from OCOTP\n");
> - return;
> - }
> -
> - serialnr->low = readl(&ocotp_regs->hw_ocotp_cust3);
> -}
> -#endif
> -
> -#ifdef CONFIG_REVISION_TAG
> -u32 get_board_rev(void)
> -{
> - if (env_get("revision#") != NULL)
> - return simple_strtoul(env_get("revision#"), NULL, 10);
> - return 0;
> -}
> -#endif
> diff --git a/board/bluegiga/apx4devkit/spl_boot.c b/board/bluegiga/apx4devkit/spl_boot.c
> deleted file mode 100644
> index e5d5c4637b0c..000000000000
> --- a/board/bluegiga/apx4devkit/spl_boot.c
> +++ /dev/null
> @@ -1,152 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+
> -/*
> - * Bluegiga APX4 Development Kit
> - *
> - * Copyright (C) 2012 Bluegiga Technologies Oy
> - *
> - * Authors:
> - * Veli-Pekka Peltola <veli-pekka.peltola at bluegiga.com>
> - * Lauri Hintsala <lauri.hintsala at bluegiga.com>
> - *
> - * Based on spl_boot.c:
> - * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
> - * on behalf of DENX Software Engineering GmbH
> - */
> -
> -#include <common.h>
> -#include <config.h>
> -#include <asm/gpio.h>
> -#include <asm/io.h>
> -#include <asm/arch/iomux-mx28.h>
> -#include <asm/arch/imx-regs.h>
> -#include <asm/arch/sys_proto.h>
> -
> -#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> -#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
> -#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
> -#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
> -
> -const iomux_cfg_t iomux_setup[] = {
> - /* DUART */
> - MX28_PAD_PWM0__DUART_RX,
> - MX28_PAD_PWM1__DUART_TX,
> -
> - /* LED */
> - MX28_PAD_PWM3__GPIO_3_28,
> -
> - /* MMC0 */
> - MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
> - MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
> - MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
> - MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
> - MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
> - MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
> - (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_NOPULL),
> - MX28_PAD_SSP0_SCK__SSP0_SCK |
> - (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
> -
> - /* GPMI NAND */
> - MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_RDN__GPMI_RDN |
> - (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
> - MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
> - MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
> -
> - /* FEC0 */
> - MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
> - MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
> - MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
> -
> - /* I2C */
> - MX28_PAD_I2C0_SCL__I2C0_SCL,
> - MX28_PAD_I2C0_SDA__I2C0_SDA,
> -
> - /* EMI */
> - MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
> -
> - MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
> - MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
> -};
> -
> -void board_init_ll(const uint32_t arg, const uint32_t *resptr)
> -{
> - mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
> -
> - /* switch LED on */
> - gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
> -}
> -
> -void mxs_adjust_memory_params(uint32_t *dram_vals)
> -{
> - /*
> - * All address lines are routed from CPU to memory chip.
> - * ADDR_PINS field is set to zero.
> - */
> - dram_vals[0x74 >> 2] = 0x0f02000a;
> -
> - /* Used memory has 4 banks. EIGHT_BANK_MODE bit is disabled. */
> - dram_vals[0x7c >> 2] = 0x00000101;
> -}
> diff --git a/configs/apx4devkit_defconfig b/configs/apx4devkit_defconfig
> deleted file mode 100644
> index 2ada946e5281..000000000000
> --- a/configs/apx4devkit_defconfig
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -CONFIG_ARM=y
> -CONFIG_ARCH_MX28=y
> -CONFIG_SYS_TEXT_BASE=0x40002000
> -CONFIG_SPL_GPIO_SUPPORT=y
> -CONFIG_SPL_LIBCOMMON_SUPPORT=y
> -CONFIG_SPL_LIBGENERIC_SUPPORT=y
> -CONFIG_NR_DRAM_BANKS=1
> -CONFIG_ENV_SIZE=0x20000
> -CONFIG_ENV_OFFSET=0x120000
> -CONFIG_SPL_TEXT_BASE=0x00001000
> -CONFIG_TARGET_APX4DEVKIT=y
> -CONFIG_SPL_SERIAL_SUPPORT=y
> -CONFIG_SPL=y
> -CONFIG_ENV_OFFSET_REDUND=0x180000
> -CONFIG_BOOTDELAY=1
> -# CONFIG_DISPLAY_BOARDINFO is not set
> -CONFIG_ARCH_MISC_INIT=y
> -CONFIG_BOARD_EARLY_INIT_F=y
> -# CONFIG_SPL_FRAMEWORK is not set
> -CONFIG_HUSH_PARSER=y
> -# CONFIG_CMD_FLASH is not set
> -CONFIG_CMD_MMC=y
> -CONFIG_CMD_USB=y
> -# CONFIG_CMD_SETEXPR is not set
> -CONFIG_CMD_DHCP=y
> -CONFIG_CMD_MII=y
> -CONFIG_CMD_PING=y
> -CONFIG_CMD_CACHE=y
> -CONFIG_CMD_EXT2=y
> -CONFIG_CMD_FAT=y
> -CONFIG_CMD_MTDPARTS=y
> -CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
> -CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:128k(bootstrap),1024k(boot),768k(env),-(root)"
> -CONFIG_CMD_UBI=y
> -CONFIG_ENV_OVERWRITE=y
> -CONFIG_ENV_IS_IN_NAND=y
> -CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> -CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> -CONFIG_VERSION_VARIABLE=y
> -CONFIG_MXS_GPIO=y
> -CONFIG_MMC_MXS=y
> -CONFIG_MTD=y
> -CONFIG_MTD_RAW_NAND=y
> -CONFIG_NAND_MXS=y
> -CONFIG_MII=y
> -CONFIG_CONS_INDEX=0
> -CONFIG_USB=y
> -CONFIG_USB_EHCI_HCD=y
> -CONFIG_USB_STORAGE=y
> -CONFIG_OF_LIBFDT=y
> diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
> deleted file mode 100644
> index bcd55bb8689e..000000000000
> --- a/include/configs/apx4devkit.h
> +++ /dev/null
> @@ -1,77 +0,0 @@
> -/* SPDX-License-Identifier: GPL-2.0+ */
> -/*
> - * Copyright (C) 2012 Bluegiga Technologies Oy
> - *
> - * Authors:
> - * Veli-Pekka Peltola <veli-pekka.peltola at bluegiga.com>
> - * Lauri Hintsala <lauri.hintsala at bluegiga.com>
> - *
> - * Based on m28evk.h:
> - * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
> - * on behalf of DENX Software Engineering GmbH
> - */
> -#ifndef __CONFIGS_APX4DEVKIT_H__
> -#define __CONFIGS_APX4DEVKIT_H__
> -
> -/* System configurations */
> -#define CONFIG_MACH_TYPE MACH_TYPE_APX4DEVKIT
> -
> -/* Memory configuration */
> -#define PHYS_SDRAM_1 0x40000000 /* Base address */
> -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
> -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> -
> -/* Environment is in NAND */
> -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
> -#define CONFIG_ENV_RANGE (384 * 1024)
> -#endif
> -
> -/* UBI and NAND partitioning */
> -
> -/* FEC Ethernet on SoC */
> -#ifdef CONFIG_CMD_NET
> -#define CONFIG_FEC_MXC
> -#define CONFIG_ETHPRIME "FEC"
> -#define CONFIG_FEC_MXC_PHYADDR 0
> -#define IMX_FEC_BASE MXS_ENET0_BASE
> -#endif
> -
> -/* USB */
> -#ifdef CONFIG_CMD_USB
> -#define CONFIG_EHCI_MXS_PORT1
> -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> -#endif
> -
> -/* Boot Linux */
> -#define CONFIG_BOOTFILE "uImage"
> -#define CONFIG_BOOTCOMMAND "run bootcmd_nand"
> -#define CONFIG_LOADADDR 0x41000000
> -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> -#define CONFIG_SERIAL_TAG
> -#define CONFIG_REVISION_TAG
> -
> -/* Extra Environments */
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> - "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
> - "verify=no\0" \
> - "bootcmd=run bootcmd_nand\0" \
> - "kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \
> - "bootargs_nand=" \
> - "setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \
> - "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \
> - "bootcmd_nand=" \
> - "run bootargs_nand && ubi part root 2048 && " \
> - "ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \
> - "bootm 41000000\0" \
> - "bootargs_mmc=" \
> - "setenv bootargs ${kernelargs} " \
> - "root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \
> - "bootcmd_mmc=" \
> - "run bootargs_mmc && mmc rescan && " \
> - "ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \
> -""
> -
> -/* The rest of the configuration is shared */
> -#include <configs/mxs.h>
> -
> -#endif /* __CONFIGS_APX4DEVKIT_H__ */
> --
> 2.17.1
>
More information about the U-Boot
mailing list