[PATCH 2/2] mtd: spi-nor-ids: Add Gigadevice GD25LQ64C
Jagan Teki
jagan at amarulasolutions.com
Fri Feb 26 08:58:56 CET 2021
On Sat, Oct 31, 2020 at 9:50 PM Alper Nebi Yasak
<alpernebiyasak at gmail.com> wrote:
>
> Add GD25LQ24C 64Mbit chip to spi-nor id table. This chip is used on
> rk3399-gru-kevin:
>
> => sf probe
> SF: Detected gd25lq64c with page size 256 Bytes, erase size 4 KiB, total 8 MiB
> => sf erase 0x600000 0x200000
> SF: 2097152 bytes @ 0x600000 Erased: OK
> => sf test 0x700000 0x1000
> SPI flash test:
> 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps
> 1 check: 5 ticks, 800 KiB/s 6.400 Mbps
> 2 write: 14 ticks, 285 KiB/s 2.280 Mbps
> 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps
> Test passed
> 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps
> 1 check: 5 ticks, 800 KiB/s 6.400 Mbps
> 2 write: 14 ticks, 285 KiB/s 2.280 Mbps
> 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps
>
> The values are the same as in Linux, except adjusted for the U-Boot
> definition of INFO().
>
> Signed-off-by: Alper Nebi Yasak <alpernebiyasak at gmail.com>
> ---
Applied to u-boot-spi/master
More information about the U-Boot
mailing list