[PATCH v4 8/8] spl: fit: Load devicetree when a Linux payload is found

[Tom Rini]

On Wed, Jan 20, 2021 at 10:46:56AM -0600, Alexandru Gagniuc wrote:

> When a FIT config specifies a devicetree, we should load it, no
> questions asked. In the case of the "simple" FIT loading path, a
> difficulty arises in selecting the load address of the FDT.
> 
> The default FDT location is right after the "kernel" or "firmware"
> image. However, if that is an OP-TEE image, then the FDT may end up in
> secure DRAM, and not be accessible to normal world kernels.
> 
> Although the best solution is to be more careful about the FDT
> address, a viable workaround is to only append the FDT after a u-boot
> or Linux image. This is identical to the previous logic, except that
> FDT loading is extended to IH_OS_LINUX images.
> 
> Signed-off-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210219/957a7316/attachment.sig>