[PATCH 45/57] ppc: Remove MPC8308RDB board

Tom Rini trini at konsulko.com
Sun Feb 21 02:06:22 CET 2021


This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Ilya Yanok <yanok at emcraft.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 arch/powerpc/cpu/mpc83xx/Kconfig        |   6 -
 board/freescale/mpc8308rdb/Kconfig      |  12 -
 board/freescale/mpc8308rdb/MAINTAINERS  |   6 -
 board/freescale/mpc8308rdb/Makefile     |   8 -
 board/freescale/mpc8308rdb/mpc8308rdb.c | 192 --------------
 board/freescale/mpc8308rdb/sdram.c      |  84 ------
 configs/MPC8308RDB_defconfig            | 152 -----------
 include/configs/MPC8308RDB.h            | 329 ------------------------
 8 files changed, 789 deletions(-)
 delete mode 100644 board/freescale/mpc8308rdb/Kconfig
 delete mode 100644 board/freescale/mpc8308rdb/MAINTAINERS
 delete mode 100644 board/freescale/mpc8308rdb/Makefile
 delete mode 100644 board/freescale/mpc8308rdb/mpc8308rdb.c
 delete mode 100644 board/freescale/mpc8308rdb/sdram.c
 delete mode 100644 configs/MPC8308RDB_defconfig
 delete mode 100644 include/configs/MPC8308RDB.h

diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig
index 2bae08e27863..15f09672e4dd 100644
--- a/arch/powerpc/cpu/mpc83xx/Kconfig
+++ b/arch/powerpc/cpu/mpc83xx/Kconfig
@@ -28,11 +28,6 @@ config TARGET_CADDY2
 	bool "Support caddy2"
 	select ARCH_MPC8349
 
-config TARGET_MPC8308RDB
-	bool "Support MPC8308RDB"
-	select ARCH_MPC8308
-	select SYS_FSL_ERRATUM_ESDHC111
-
 config TARGET_MPC8313ERDB_NOR
 	bool "Support MPC8313ERDB_NOR"
 	select ARCH_MPC8313
@@ -330,7 +325,6 @@ config FSL_ELBC
 	bool
 
 source "board/esd/vme8349/Kconfig"
-source "board/freescale/mpc8308rdb/Kconfig"
 source "board/freescale/mpc8313erdb/Kconfig"
 source "board/freescale/mpc8315erdb/Kconfig"
 source "board/freescale/mpc8323erdb/Kconfig"
diff --git a/board/freescale/mpc8308rdb/Kconfig b/board/freescale/mpc8308rdb/Kconfig
deleted file mode 100644
index 48d25e5a26ed..000000000000
--- a/board/freescale/mpc8308rdb/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8308RDB
-
-config SYS_BOARD
-	default "mpc8308rdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8308RDB"
-
-endif
diff --git a/board/freescale/mpc8308rdb/MAINTAINERS b/board/freescale/mpc8308rdb/MAINTAINERS
deleted file mode 100644
index 07ff2abd13a1..000000000000
--- a/board/freescale/mpc8308rdb/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MPC8308RDB BOARD
-M:	Ilya Yanok <yanok at emcraft.com>
-S:	Maintained
-F:	board/freescale/mpc8308rdb/
-F:	include/configs/MPC8308RDB.h
-F:	configs/MPC8308RDB_defconfig
diff --git a/board/freescale/mpc8308rdb/Makefile b/board/freescale/mpc8308rdb/Makefile
deleted file mode 100644
index d6eb4dcef2e8..000000000000
--- a/board/freescale/mpc8308rdb/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-# (C) Copyright 2010
-# Ilya Yanok, Emcraft Systems, yanok at emcraft.com
-
-obj-y	:= mpc8308rdb.o sdram.o
diff --git a/board/freescale/mpc8308rdb/mpc8308rdb.c b/board/freescale/mpc8308rdb/mpc8308rdb.c
deleted file mode 100644
index db9c5ba1935e..000000000000
--- a/board/freescale/mpc8308rdb/mpc8308rdb.c
+++ /dev/null
@@ -1,192 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok at emcraft.com
- */
-
-#include <common.h>
-#include <hwconfig.h>
-#include <i2c.h>
-#include <init.h>
-#include <net.h>
-#include <spi.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <vsc7385.h>
-#include <netdev.h>
-#include <fsl_esdhc.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_mpc83xx_serdes.h>
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#ifdef CONFIG_MPC8XXX_SPI
-
-#define SPI_CS_MASK	0x00400000
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
-	return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	/* active low */
-	clrbits_be32(&immr->gpio[0].dat, SPI_CS_MASK);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
-	/* inactive high */
-	setbits_be32(&immr->gpio[0].dat, SPI_CS_MASK);
-}
-#endif /* CONFIG_MPC8XXX_SPI */
-
-#ifdef CONFIG_FSL_ESDHC
-int board_mmc_init(struct bd_info *bd)
-{
-	return fsl_esdhc_mmc_init(bd);
-}
-#endif
-
-static u8 read_board_info(void)
-{
-	u8 val8;
-	i2c_set_bus_num(0);
-
-	if (i2c_read(CONFIG_SYS_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0)
-		return val8;
-	else
-		return 0;
-}
-
-int checkboard(void)
-{
-	static const char * const rev_str[] = {
-		"1.0",
-		"<reserved>",
-		"<reserved>",
-		"<reserved>",
-		"<unknown>",
-	};
-	u8 info;
-	int i;
-
-	info = read_board_info();
-	i = (!info) ? 4 : info & 0x03;
-
-	printf("Board: Freescale MPC8308RDB Rev %s\n", rev_str[i]);
-
-	return 0;
-}
-
-static struct pci_region pcie_regions_0[] = {
-	{
-		.bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
-		.size = CONFIG_SYS_PCIE1_MEM_SIZE,
-		.flags = PCI_REGION_MEM,
-	},
-	{
-		.bus_start = CONFIG_SYS_PCIE1_IO_BASE,
-		.phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
-		.size = CONFIG_SYS_PCIE1_IO_SIZE,
-		.flags = PCI_REGION_IO,
-	},
-};
-
-void pci_init_board(void)
-{
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	sysconf83xx_t *sysconf = &immr->sysconf;
-	law83xx_t *pcie_law = sysconf->pcielaw;
-	struct pci_region *pcie_reg[] = { pcie_regions_0 };
-
-	fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX,
-					FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
-
-	/* Deassert the resets in the control register */
-	out_be32(&sysconf->pecr1, 0xE0008000);
-	udelay(2000);
-
-	/* Configure PCI Express Local Access Windows */
-	out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
-	out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
-
-	mpc83xx_pcie_init(1, pcie_reg);
-}
-/*
- * Miscellaneous late-boot configurations
- *
- * If a VSC7385 microcode image is present, then upload it.
-*/
-int misc_init_r(void)
-{
-#ifdef CONFIG_MPC8XXX_SPI
-	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-	sysconf83xx_t *sysconf = &immr->sysconf;
-
-	/*
-	 * Set proper bits in SICRH to allow SPI on header J8
-	 *
-	 * NOTE: this breaks the TSEC2 interface, attached to the Vitesse
-	 * switch. The pinmux configuration does not have a fine enough
-	 * granularity to support both simultaneously.
-	 */
-	clrsetbits_be32(&sysconf->sicrh, SICRH_GPIO_A_TSEC2, SICRH_GPIO_A_GPIO);
-	puts("WARNING: SPI enabled, TSEC2 support is broken\n");
-
-	/* Set header J8 SPI chip select output, disabled */
-	setbits_be32(&immr->gpio[0].dir, SPI_CS_MASK);
-	setbits_be32(&immr->gpio[0].dat, SPI_CS_MASK);
-#endif
-
-#ifdef CONFIG_VSC7385_IMAGE
-	if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
-		CONFIG_VSC7385_IMAGE_SIZE)) {
-		puts("Failure uploading VSC7385 microcode.\n");
-		return 1;
-	}
-#endif
-
-	return 0;
-}
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-	fsl_fdt_fixup_dr_usb(blob, bd);
-	fdt_fixup_esdhc(blob, bd);
-
-	return 0;
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
-	int rv, num_if = 0;
-
-	/* Initialize TSECs first */
-	rv = cpu_eth_init(bis);
-	if (rv >= 0)
-		num_if += rv;
-	else
-		printf("ERROR: failed to initialize TSECs.\n");
-
-	rv = pci_eth_init(bis);
-	if (rv >= 0)
-		num_if += rv;
-	else
-		printf("ERROR: failed to initialize PCI Ethernet.\n");
-
-	return num_if;
-}
diff --git a/board/freescale/mpc8308rdb/sdram.c b/board/freescale/mpc8308rdb/sdram.c
deleted file mode 100644
index 6340fd16ea9b..000000000000
--- a/board/freescale/mpc8308rdb/sdram.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok at emcraft.com
- *
- * Authors: Nick.Spence at freescale.com
- *          Wilson.Lo at freescale.com
- *          scottwood at freescale.com
- *
- * This files is  mostly identical to the original from
- * board\freescale\mpc8315erdb\sdram.c
- */
-
-#include <common.h>
-#include <init.h>
-#include <mpc83xx.h>
-#include <asm/global_data.h>
-
-#include <asm/bitops.h>
-#include <asm/io.h>
-
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Fixed sdram init -- doesn't use serial presence detect.
- *
- * This is useful for faster booting in configs where the RAM is unlikely
- * to be changed, or for things like NAND booting where space is tight.
- */
-static long fixed_sdram(void)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
-	u32 msize_log2 = __ilog2(msize);
-
-	out_be32(&im->sysconf.ddrlaw[0].bar,
-			CONFIG_SYS_SDRAM_BASE  & 0xfffff000);
-	out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1));
-	out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE);
-
-	out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24);
-	out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
-
-	/* Currently we use only one CS, so disable the other bank. */
-	out_be32(&im->ddr.cs_config[1], 0);
-
-	out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
-	out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
-	out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
-	out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
-	out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-
-	out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
-	out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
-	out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
-	out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
-
-	out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
-	sync();
-
-	/* enable DDR controller */
-	setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
-	sync();
-
-	return get_ram_size(CONFIG_SYS_SDRAM_BASE, msize);
-}
-
-int dram_init(void)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	u32 msize;
-
-	if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
-		return -ENXIO;
-
-	/* DDR SDRAM */
-	msize = fixed_sdram();
-
-	/* return total bus SDRAM size(bytes)  -- DDR */
-	gd->ram_size = msize;
-
-	return 0;
-}
diff --git a/configs/MPC8308RDB_defconfig b/configs/MPC8308RDB_defconfig
deleted file mode 100644
index 74eccf5b6ba9..000000000000
--- a/configs/MPC8308RDB_defconfig
+++ /dev/null
@@ -1,152 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFE000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_CLK_FREQ=33333333
-CONFIG_MPC83xx=y
-CONFIG_TARGET_MPC8308RDB=y
-CONFIG_SYSTEM_PLL_VCO_DIV_2=y
-CONFIG_SYSTEM_PLL_FACTOR_4_1=y
-CONFIG_CORE_PLL_RATIO_3_1=y
-CONFIG_BOOT_MEMORY_SPACE_LOW=y
-CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
-CONFIG_TSEC1_MODE_RGMII=y
-CONFIG_TSEC2_MODE_RGMII=y
-CONFIG_BAT0=y
-CONFIG_BAT0_NAME="DDR"
-CONFIG_BAT0_BASE=0x00000000
-CONFIG_BAT0_LENGTH_128_MBYTES=y
-CONFIG_BAT0_ACCESS_RW=y
-CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y
-CONFIG_BAT0_USER_MODE_VALID=y
-CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT1=y
-CONFIG_BAT1_NAME="IMMRBAR"
-CONFIG_BAT1_BASE=0xE0000000
-CONFIG_BAT1_LENGTH_8_MBYTES=y
-CONFIG_BAT1_ACCESS_RW=y
-CONFIG_BAT1_ICACHE_INHIBITED=y
-CONFIG_BAT1_ICACHE_GUARDED=y
-CONFIG_BAT1_DCACHE_INHIBITED=y
-CONFIG_BAT1_DCACHE_GUARDED=y
-CONFIG_BAT1_USER_MODE_VALID=y
-CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT2=y
-CONFIG_BAT2_NAME="FLASH"
-CONFIG_BAT2_BASE=0xFE000000
-CONFIG_BAT2_LENGTH_8_MBYTES=y
-CONFIG_BAT2_ACCESS_RW=y
-CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y
-CONFIG_BAT2_DCACHE_INHIBITED=y
-CONFIG_BAT2_DCACHE_GUARDED=y
-CONFIG_BAT2_USER_MODE_VALID=y
-CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
-CONFIG_BAT3=y
-CONFIG_BAT3_NAME="STACK_IN_DCACHE"
-CONFIG_BAT3_BASE=0xE6000000
-CONFIG_BAT3_ACCESS_RW=y
-CONFIG_BAT3_USER_MODE_VALID=y
-CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
-CONFIG_LBLAW0=y
-CONFIG_LBLAW0_BASE=0xFE000000
-CONFIG_LBLAW0_NAME="FLASH"
-CONFIG_LBLAW0_LENGTH_8_MBYTES=y
-CONFIG_LBLAW1=y
-CONFIG_LBLAW1_BASE=0xE0600000
-CONFIG_LBLAW1_NAME="NAND"
-CONFIG_LBLAW1_LENGTH_32_KBYTES=y
-CONFIG_LBLAW2=y
-CONFIG_LBLAW2_BASE=0xF0000000
-CONFIG_LBLAW2_NAME="VSC7385"
-CONFIG_LBLAW2_LENGTH_128_KBYTES=y
-CONFIG_ELBC_BR0_OR0=y
-CONFIG_BR0_OR0_NAME="FLASH"
-CONFIG_BR0_OR0_BASE=0xFE000000
-CONFIG_BR0_PORTSIZE_16BIT=y
-CONFIG_OR0_AM_8_MBYTES=y
-CONFIG_OR0_XAM_SET=y
-CONFIG_OR0_SCY_15=y
-CONFIG_OR0_CSNT_EARLIER=y
-CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
-CONFIG_OR0_XACS_EXTENDED=y
-CONFIG_OR0_TRLX_RELAXED=y
-CONFIG_OR0_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR1_OR1=y
-CONFIG_BR1_OR1_NAME="NAND"
-CONFIG_BR1_OR1_BASE=0xE0600000
-CONFIG_BR1_ERRORCHECKING_BOTH=y
-CONFIG_BR1_MACHINE_FCM=y
-CONFIG_OR1_SCY_1=y
-CONFIG_OR1_CSCT_8_CYCLE=y
-CONFIG_OR1_CST_ONE_CLOCK=y
-CONFIG_OR1_CHT_TWO_CLOCK=y
-CONFIG_OR1_TRLX_RELAXED=y
-CONFIG_OR1_EHTR_8_CYCLE=y
-CONFIG_ELBC_BR2_OR2=y
-CONFIG_BR2_OR2_NAME="VSC7385_BASE"
-CONFIG_BR2_OR2_BASE=0xF0000000
-CONFIG_OR2_AM_128_KBYTES=y
-CONFIG_OR2_SCY_15=y
-CONFIG_OR2_CSNT_EARLIER=y
-CONFIG_OR2_XACS_EXTENDED=y
-CONFIG_OR2_SETA_EXTERNAL=y
-CONFIG_OR2_TRLX_RELAXED=y
-CONFIG_OR2_EHTR_8_CYCLE=y
-CONFIG_HID0_FINAL_EMCP=y
-CONFIG_HID0_FINAL_DPM=y
-CONFIG_HID0_FINAL_ICE=y
-CONFIG_HID2_HBE=y
-CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y
-CONFIG_SICR_GPIO_A_TSEC2=y
-CONFIG_SICR_GPIO_B_TSEC_GTX_CLK125=y
-CONFIG_SICR_IEEE1588_A_GPIO=y
-CONFIG_SICR_GTM_GPIO=y
-CONFIG_SICR_GPIOSEL_IEEE1588=y
-CONFIG_SICR_TMSOBI1_2_5_V=y
-CONFIG_SICR_TMSOBI2_2_5_V=y
-CONFIG_ACR_PIPE_DEP_4=y
-CONFIG_ACR_RPTCNT_4=y
-CONFIG_SPCR_TSECEP_3=y
-CONFIG_LCRR_DBYP_PLL_BYPASSED=y
-CONFIG_LCRR_CLKDIV_2=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=5
-CONFIG_MISC_INIT_R=y
-CONFIG_HUSH_PARSER=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_ENV_ADDR=0xFE080000
-CONFIG_ENV_ADDR_REDUND=0xFE090000
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_SMSC=y
-CONFIG_PHY_VITESSE=y
-CONFIG_MII=y
-CONFIG_TSEC_ENET=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
deleted file mode 100644
index af2916bf756b..000000000000
--- a/include/configs/MPC8308RDB.h
+++ /dev/null
@@ -1,329 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
- * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok at emcraft.com
- *
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <linux/stringify.h>
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_E300		1 /* E300 family */
-
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
-#define CONFIG_SYS_FSL_ESDHC_USE_PIO
-#endif
-
-/*
- * On-board devices
- *
- * TSEC1 is SoC TSEC
- * TSEC2 is VSC switch
- */
-#define CONFIG_TSEC1
-#define CONFIG_VSC7385_ENET
-
-/*
- * SERDES
- */
-#define CONFIG_FSL_SERDES
-#define CONFIG_FSL_SERDES1	0xe3000
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
-#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_EN \
-				| DDRCDR_PZ_LOZ \
-				| DDRCDR_NZ_LOZ \
-				| DDRCDR_ODT \
-				| DDRCDR_Q_DRN)
-				/* 0x7b880001 */
-/*
- * Manually set up DDR parameters
- * consist of two chips HY5PS12621BFP-C4 from HYNIX
- */
-
-#define CONFIG_SYS_DDR_SIZE		128 /* MB */
-
-#define CONFIG_SYS_DDR_CS0_BNDS	0x00000007
-#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN \
-				| CSCONFIG_ODT_RD_NEVER \
-				| CSCONFIG_ODT_WR_ONLY_CURRENT \
-				| CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
-				/* 0x80010102 */
-#define CONFIG_SYS_DDR_TIMING_3	0x00000000
-#define CONFIG_SYS_DDR_TIMING_0	((0 << TIMING_CFG0_RWT_SHIFT) \
-				| (0 << TIMING_CFG0_WRT_SHIFT) \
-				| (0 << TIMING_CFG0_RRT_SHIFT) \
-				| (0 << TIMING_CFG0_WWT_SHIFT) \
-				| (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \
-				| (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \
-				| (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \
-				| (2 << TIMING_CFG0_MRS_CYC_SHIFT))
-				/* 0x00220802 */
-#define CONFIG_SYS_DDR_TIMING_1	((2 << TIMING_CFG1_PRETOACT_SHIFT) \
-				| (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \
-				| (2 << TIMING_CFG1_ACTTORW_SHIFT) \
-				| (5 << TIMING_CFG1_CASLAT_SHIFT) \
-				| (6 << TIMING_CFG1_REFREC_SHIFT) \
-				| (2 << TIMING_CFG1_WRREC_SHIFT) \
-				| (2 << TIMING_CFG1_ACTTOACT_SHIFT) \
-				| (2 << TIMING_CFG1_WRTORD_SHIFT))
-				/* 0x27256222 */
-#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) \
-				| (4 << TIMING_CFG2_CPO_SHIFT) \
-				| (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \
-				| (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \
-				| (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \
-				| (3 << TIMING_CFG2_CKE_PLS_SHIFT) \
-				| (5 << TIMING_CFG2_FOUR_ACT_SHIFT))
-				/* 0x121048c5 */
-#define CONFIG_SYS_DDR_INTERVAL	((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \
-				| (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
-				/* 0x03600100 */
-#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SREN \
-				| SDRAM_CFG_SDRAM_TYPE_DDR2 \
-				| SDRAM_CFG_DBW_32)
-				/* 0x43080000 */
-
-#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000 /* 1 posted refresh */
-#define CONFIG_SYS_DDR_MODE		((0x0448 << SDRAM_MODE_ESD_SHIFT) \
-				| (0x0232 << SDRAM_MODE_SD_SHIFT))
-				/* ODT 150ohm CL=3, AL=1 on SDRAM */
-#define CONFIG_SYS_DDR_MODE2		0x00000000
-
-/*
- * Memory test
- */
-
-/*
- * The reserved memory
- */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#define CONFIG_SYS_MONITOR_LEN	(512 * 1024) /* Reserve 512 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN	(512 * 1024) /* Reserved for malloc */
-
-/*
- * Initial RAM Base Address Setup
- */
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET	\
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*
- * FLASH on the Local Bus
- */
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-#define CONFIG_SYS_FLASH_BASE		0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE		8 /* FLASH size is 8M */
-
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* number of banks */
-/* 127 64KB sectors and 8 8KB top sectors per device */
-#define CONFIG_SYS_MAX_FLASH_SECT	135
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500 /* Flash Write Timeout (ms) */
-
-/*
- * NAND Flash on the Local Bus
- */
-#define CONFIG_SYS_NAND_BASE	0xE0600000		/* 0xE0600000 */
-#define CONFIG_SYS_NAND_WINDOW_SIZE	(32 * 1024)	/* 0x00008000 */
-				/* 0xFFFF8396 */
-
-#ifdef CONFIG_VSC7385_ENET
-#define CONFIG_TSEC2
-					/* VSC7385 Base address on CS2 */
-#define CONFIG_SYS_VSC7385_BASE		0xF0000000
-#define CONFIG_SYS_VSC7385_SIZE		(128 * 1024) /* 0x00020000 */
-					/* 0xFFFE09FF */
-/* The flash address and size of the VSC7385 firmware image */
-#define CONFIG_VSC7385_IMAGE		0xFE7FE000
-#define CONFIG_VSC7385_IMAGE_SIZE	8192
-#endif
-/*
- * Serial Port
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
-
-#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
-#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED	400000
-#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
-#define CONFIG_SYS_FSL_I2C2_SPEED	400000
-#define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
-#define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
-#define CONFIG_SYS_I2C_NOPROBES		{ {0, 0x51} }
-
-/*
- * SPI on header J8
- *
- * WARNING: enabling this will break TSEC2 (connected to the Vitesse switch)
- * due to a pinmux conflict between GPIO9 (SPI chip select )and the TSEC2 pins.
- */
-#ifdef CONFIG_MPC8XXX_SPI
-#define CONFIG_USE_SPIFLASH
-#endif
-
-/*
- * Board info - revision and where boot from
- */
-#define CONFIG_SYS_I2C_PCF8574A_ADDR	0x39
-
-/*
- * Config on-board RTC
- */
-#define CONFIG_RTC_DS1337	/* ds1339 on board, use ds1337 rtc via i2c */
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68 /* at address 0x68 */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCIE1_BASE		0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_BASE	0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA0000000
-#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
-#define CONFIG_SYS_PCIE1_CFG_BASE	0xB0000000
-#define CONFIG_SYS_PCIE1_CFG_SIZE	0x01000000
-#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
-#define CONFIG_SYS_PCIE1_IO_PHYS	0xB1000000
-#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000
-
-/* enable PCIE clock */
-#define CONFIG_SYS_SCCR_PCIEXP1CM	1
-
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCIE
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957	/* Freescale */
-#define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1
-
-/*
- * TSEC
- */
-#define CONFIG_SYS_TSEC1_OFFSET	0x24000
-#define CONFIG_SYS_TSEC1	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
-#define CONFIG_SYS_TSEC2_OFFSET	0x25000
-#define CONFIG_SYS_TSEC2	(CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET)
-
-/*
- * TSEC ethernet configuration
- */
-#define CONFIG_TSEC1_NAME	"eTSEC0"
-#define CONFIG_TSEC2_NAME	"eTSEC1"
-#define TSEC1_PHY_ADDR		2
-#define TSEC2_PHY_ADDR		1
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: eTSEC[0-1] */
-#define CONFIG_ETHPRIME		"eTSEC0"
-
-/*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LOAD_ADDR		0x2000000 /* default load address */
-
-#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size */
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 256 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
-
-/*
- * Environment Configuration
- */
-
-#if defined(CONFIG_TSEC_ENET)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_LOADADDR	800000	/* default location for tftp and bootm */
-
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"consoledev=ttyS0\0"						\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs}"				\
-		" console=${consoledev},${baudrate}\0"			\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addmisc=setenv bootargs ${bootargs}\0"				\
-	"kernel_addr=FE080000\0"					\
-	"fdt_addr=FE280000\0"						\
-	"ramdisk_addr=FE290000\0"					\
-	"u-boot=mpc8308rdb/u-boot.bin\0"				\
-	"kernel_addr_r=1000000\0"					\
-	"fdt_addr_r=C00000\0"						\
-	"hostname=mpc8308rdb\0"						\
-	"bootfile=mpc8308rdb/uImage\0"					\
-	"fdtfile=mpc8308rdb/mpc8308rdb.dtb\0"				\
-	"rootpath=/opt/eldk-4.2/ppc_6xx\0"				\
-	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
-	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
-	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
-		"tftp ${fdt_addr_r} ${fdtfile};"			\
-		"run nfsargs addip addtty addmtd addmisc;"		\
-		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
-	"bootcmd=run flash_self\0"					\
-	"load=tftp ${loadaddr} ${u-boot}\0"				\
-	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
-		" +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\
-		" +${filesize};cp.b ${fileaddr} "			\
-		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"	\
-	"upd=run load update\0"						\
-
-#endif	/* __CONFIG_H */
-- 
2.17.1



More information about the U-Boot mailing list