[PATCH u-boot-marvell 5/5] pci: pci_mvebu: set local dev to number 1

[Marek Behún]

Linux displays the real PCIe card connected to a mvebu PCIe slot as
device 0, not 1. This is done by setting local dev number to 1, so that
the local "Marvell Memory controller" device is on address 1.

Let's do it also in U-Boot.

With this commit the pci command in U-Boot prints something like:
  => pci
  Scanning PCI devices on bus 0
  BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
  _____________________________________________________________
  00.00.00   0x168c     0x003c     Network controller      0x80

Signed-off-by: Marek Behún <marek.behun at nic.cz>
Cc: Stefan Roese <sr at denx.de>
Cc: Phil Sutter <phil at nwl.cc>
Cc: Mario Six <mario.six at gdsys.cc>
Cc: Baruch Siach <baruch at tkos.co.il>
---
 drivers/pci/pci_mvebu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c
index 2d923b7d8d..11b590617d 100644
--- a/drivers/pci/pci_mvebu.c
+++ b/drivers/pci/pci_mvebu.c
@@ -288,7 +288,7 @@ static int mvebu_pcie_probe(struct udevice *dev)
 	      mvebu_pcie_get_local_dev_nr(pcie));
 
 	pcie->first_busno = bus;
-	pcie->local_dev = 0;
+	pcie->local_dev = 1;
 
 	mvebu_pcie_set_local_bus_nr(pcie, bus);
 	mvebu_pcie_set_local_dev_nr(pcie, pcie->local_dev);
-- 
2.26.2