[PATCH 15/16] drivers: ata: Remove mvsata_ide driver
Tom Rini
trini at konsulko.com
Wed Feb 10 03:42:56 CET 2021
The mvsata_ide driver was due for DM conversion by v2019.07. As that
has long passed, remove the driver and disable it in the boards which
had enabled it.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
Makefile | 10 -
arch/arm/mach-kirkwood/include/mach/config.h | 2 -
configs/dns325_defconfig | 1 -
configs/dreamplug_defconfig | 1 -
configs/ds109_defconfig | 1 -
configs/edminiv2_defconfig | 1 -
configs/goflexhome_defconfig | 1 -
configs/guruplug_defconfig | 1 -
configs/ib62x0_defconfig | 1 -
configs/nas220_defconfig | 1 -
configs/nsa310s_defconfig | 1 -
drivers/ata/Kconfig | 6 -
drivers/ata/Makefile | 1 -
drivers/ata/mvsata_ide.c | 199 -------------------
include/configs/dns325.h | 8 -
include/configs/dreamplug.h | 7 -
include/configs/ds109.h | 7 -
include/configs/edminiv2.h | 3 -
include/configs/goflexhome.h | 7 -
include/configs/guruplug.h | 7 -
include/configs/ib62x0.h | 3 -
include/configs/nas220.h | 8 -
include/configs/nsa310s.h | 2 -
include/configs/sheevaplug.h | 3 -
scripts/config_whitelist.txt | 2 -
25 files changed, 284 deletions(-)
delete mode 100644 drivers/ata/mvsata_ide.c
diff --git a/Makefile b/Makefile
index ebbedb1fb1af..9d6ac5e16fe5 100644
--- a/Makefile
+++ b/Makefile
@@ -1064,16 +1064,6 @@ ifneq ($(CONFIG_DM_USB)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy)
@echo >&2 "===================================================="
endif
endif
-ifeq ($(CONFIG_MVSATA_IDE),y)
- @echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board does use CONFIG_MVSATA_IDE which is not"
- @echo >&2 "ported to driver-model (DM) yet. Please update the storage"
- @echo >&2 "controller driver to use CONFIG_AHCI before the v2019.07"
- @echo >&2 "release."
- @echo >&2 "Failure to update by the deadline may result in board removal."
- @echo >&2 "See doc/driver-model/migration.rst for more info."
- @echo >&2 "===================================================="
-endif
ifeq ($(CONFIG_LIBATA),y)
ifneq ($(CONFIG_AHCI),y)
@echo >&2 "===================== WARNING ======================"
diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index 3bd032e08790..ef68fc86b22e 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -74,8 +74,6 @@
*/
#ifdef CONFIG_IDE
#define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT1
/* Needs byte-swapping for ATA data register */
#define CONFIG_IDE_SWAP_IO
/* Data, registers and alternate blocks are at the same offset */
diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig
index a5fe9cd33160..493c802d5208 100644
--- a/configs/dns325_defconfig
+++ b/configs/dns325_defconfig
@@ -36,7 +36,6 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index 2c27726fcde4..b4dedc9e59b1 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -34,7 +34,6 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x100000
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig
index e412e3f5937c..77c094b76637 100644
--- a/configs/ds109_defconfig
+++ b/configs/ds109_defconfig
@@ -30,7 +30,6 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
CONFIG_ENV_ADDR=0x3D0000
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig
index 916775e9ed17..0aacb35e44c4 100644
--- a/configs/edminiv2_defconfig
+++ b/configs/edminiv2_defconfig
@@ -32,7 +32,6 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xFFF84000
CONFIG_NETCONSOLE=y
-CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig
index b271822dcbfd..6e3e6325e921 100644
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@@ -37,7 +37,6 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig
index f7e934bcf89e..a3fe98cabf7a 100644
--- a/configs/guruplug_defconfig
+++ b/configs/guruplug_defconfig
@@ -38,7 +38,6 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig
index 1fbf03442d0c..57ccfe71fbd7 100644
--- a/configs/ib62x0_defconfig
+++ b/configs/ib62x0_defconfig
@@ -35,7 +35,6 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
-CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index e89b6b9e14d6..3e031604eec2 100644
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -38,7 +38,6 @@ CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
CONFIG_BLK=y
# CONFIG_MMC is not set
CONFIG_MTD=y
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index bec1707ddc13..e4cf1c470e05 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -32,7 +32,6 @@ CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NETCONSOLE=y
-CONFIG_MVSATA_IDE=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 3914f996d91c..9ff4b8736c1f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -83,12 +83,6 @@ config FSL_SATA
Enable this driver to support the SATA controller found in
some Freescale PowerPC SoCs.
-config MVSATA_IDE
- bool "Enable Marvell SATA controller driver support via IDE interface"
- help
- Enable this driver to support the SATA controller found in
- some Marvell SoCs, running in IDE compatibility mode using PIO.
-
config SATA_MV
bool "Enable Marvell SATA controller driver support"
select AHCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 98fb4807008e..4811b2f82c4e 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_SCSI_AHCI) += ahci.o
obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
obj-$(CONFIG_FSL_SATA) += fsl_sata.o
obj-$(CONFIG_LIBATA) += libata.o
-obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
obj-$(CONFIG_SATA) += sata.o
obj-$(CONFIG_SATA_CEVA) += sata_ceva.o
obj-$(CONFIG_SATA_MV) += sata_mv.o
diff --git a/drivers/ata/mvsata_ide.c b/drivers/ata/mvsata_ide.c
deleted file mode 100644
index 41f9a91617d4..000000000000
--- a/drivers/ata/mvsata_ide.c
+++ /dev/null
@@ -1,199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot at aribaud.net>
- *
- * Written-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_ARCH_ORION5X)
-#include <asm/arch/orion5x.h>
-#elif defined(CONFIG_ARCH_KIRKWOOD)
-#include <asm/arch/soc.h>
-#elif defined(CONFIG_ARCH_MVEBU)
-#include <linux/mbus.h>
-#endif
-
-/* SATA port registers */
-struct mvsata_port_registers {
- u32 reserved0[10];
- u32 edma_cmd;
- u32 reserved1[181];
- /* offset 0x300 : ATA Interface registers */
- u32 sstatus;
- u32 serror;
- u32 scontrol;
- u32 ltmode;
- u32 phymode3;
- u32 phymode4;
- u32 reserved2[5];
- u32 phymode1;
- u32 phymode2;
- u32 bist_cr;
- u32 bist_dw1;
- u32 bist_dw2;
- u32 serrorintrmask;
-};
-
-/*
- * Sanity checks:
- * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR.
- * - for ide_preinit to make sense, we need at least one of
- * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET;
- * - for ide_preinit to be called, we need CONFIG_IDE_PREINIT.
- * Fail with an explanation message if these conditions are not met.
- * This is particularly important for CONFIG_IDE_PREINIT, because
- * its lack would not cause a build error.
- */
-
-#if !defined(CONFIG_SYS_ATA_BASE_ADDR)
-#error CONFIG_SYS_ATA_BASE_ADDR must be defined
-#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \
- && !defined(CONFIG_SYS_ATA_IDE1_OFFSET)
-#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \
- must be defined
-#elif !defined(CONFIG_IDE_PREINIT)
-#error CONFIG_IDE_PREINIT must be defined
-#endif
-
-/*
- * Masks and values for SControl DETection and Interface Power Management,
- * and for SStatus DETection.
- */
-
-#define MVSATA_EDMA_CMD_ATA_RST 0x00000004
-#define MVSATA_SCONTROL_DET_MASK 0x0000000F
-#define MVSATA_SCONTROL_DET_NONE 0x00000000
-#define MVSATA_SCONTROL_DET_INIT 0x00000001
-#define MVSATA_SCONTROL_IPM_MASK 0x00000F00
-#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED 0x00000300
-#define MVSATA_SCONTROL_MASK \
- (MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK)
-#define MVSATA_PORT_INIT \
- (MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
-#define MVSATA_PORT_USE \
- (MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
-#define MVSATA_SSTATUS_DET_MASK 0x0000000F
-#define MVSATA_SSTATUS_DET_DEVCOMM 0x00000003
-
-/*
- * Status codes to return to client callers. Currently, callers ignore
- * exact value and only care for zero or nonzero, so no need to make this
- * public, it is only #define'd for clarity.
- * If/when standard negative codes are implemented in U-Boot, then these
- * #defines should be moved to, or replaced by ones from, the common list
- * of status codes.
- */
-
-#define MVSATA_STATUS_OK 0
-#define MVSATA_STATUS_TIMEOUT -1
-
-/*
- * Registers for SATA MBUS memory windows
- */
-
-#define MVSATA_WIN_CONTROL(w) (MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4))
-#define MVSATA_WIN_BASE(w) (MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4))
-
-/*
- * Initialize SATA memory windows for Armada XP
- */
-
-#ifdef CONFIG_ARCH_MVEBU
-static void mvsata_ide_conf_mbus_windows(void)
-{
- const struct mbus_dram_target_info *dram;
- int i;
-
- dram = mvebu_mbus_dram_info();
-
- /* Disable windows, Set Size/Base to 0 */
- for (i = 0; i < 4; i++) {
- writel(0, MVSATA_WIN_CONTROL(i));
- writel(0, MVSATA_WIN_BASE(i));
- }
-
- for (i = 0; i < dram->num_cs; i++) {
- const struct mbus_dram_window *cs = dram->cs + i;
- writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
- (dram->mbus_dram_target_id << 4) | 1,
- MVSATA_WIN_CONTROL(i));
- writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i));
- }
-}
-#endif
-
-/*
- * Initialize one MVSATAHC port: set SControl's IPM to "always active"
- * and DET to "reset", then wait for SStatus's DET to become "device and
- * comm ok" (or time out after 50 us if no device), then set SControl's
- * DET back to "no action".
- */
-
-static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
-{
- u32 control;
- u32 status;
- u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
-
- /* Hard reset */
- writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd);
- udelay(25); /* taken from original marvell port */
- writel(0, &port->edma_cmd);
-
- /* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
- control = readl(&port->scontrol);
- control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
- writel(control, &port->scontrol);
- /* Toggle control DET back to 0 (normal operation) */
- control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
- writel(control, &port->scontrol);
- /* wait for status DET to become 3 (device and communication OK) */
- while (--timeleft) {
- status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
- if (status == MVSATA_SSTATUS_DET_DEVCOMM)
- break;
- udelay(1);
- }
- /* return success or time-out error depending on time left */
- if (!timeleft)
- return MVSATA_STATUS_TIMEOUT;
- return MVSATA_STATUS_OK;
-}
-
-/*
- * ide_preinit() will be called by ide_init in cmd_ide.c and will
- * reset the MVSTATHC ports needed by the board.
- */
-
-int ide_preinit(void)
-{
- int ret = MVSATA_STATUS_TIMEOUT;
- int status;
-
-#ifdef CONFIG_ARCH_MVEBU
- mvsata_ide_conf_mbus_windows();
-#endif
-
- /* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
-#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
- status = mvsata_ide_initialize_port(
- (struct mvsata_port_registers *)
- (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
- if (status == MVSATA_STATUS_OK)
- ret = MVSATA_STATUS_OK;
-#endif
- /* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
-#if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
- status = mvsata_ide_initialize_port(
- (struct mvsata_port_registers *)
- (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
- if (status == MVSATA_STATUS_OK)
- ret = MVSATA_STATUS_OK;
-#endif
- /* Return success if at least one port initialization succeeded */
- return ret;
-}
diff --git a/include/configs/dns325.h b/include/configs/dns325.h
index ea8d28b5b536..8990efb3f68b 100644
--- a/include/configs/dns325.h
+++ b/include/configs/dns325.h
@@ -35,14 +35,6 @@
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#endif
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif
-
/*
* Enable GPI0 support
*/
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 09bac0177902..9106203ebc46 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -52,11 +52,4 @@
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
#endif /* _CONFIG_DREAMPLUG_H */
diff --git a/include/configs/ds109.h b/include/configs/ds109.h
index 1f033ababf6e..ea563b04d1a8 100644
--- a/include/configs/ds109.h
+++ b/include/configs/ds109.h
@@ -54,11 +54,4 @@
#define CONFIG_PHY_BASE_ADR 8
#endif /* CONFIG_CMD_NET */
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
#endif /* _CONFIG_DS109_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index dd16e3fbda43..949ff55624d6 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -122,9 +122,6 @@
*/
#ifdef CONFIG_IDE
#define __io
-#define CONFIG_IDE_PREINIT
-/* ED Mini V has an IDE-compatible SATA connector for port 1 */
-#define CONFIG_MVSATA_IDE_USE_PORT1
/* Needs byte-swapping for ATA data register */
#define CONFIG_IDE_SWAP_IO
/* Data, registers and alternate blocks are at the same offset */
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
index 51325047ecda..a18e7869b08f 100644
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@@ -72,11 +72,4 @@
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
-/*
- * * SATA Driver configuration
- * */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
#endif /* _CONFIG_GOFLEXHOME_H */
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index 1e1e5da4d52f..8de888fe7e06 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -66,11 +66,4 @@
#define CONFIG_PHY_BASE_ADR 0
#endif /* CONFIG_CMD_NET */
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
#endif /* _CONFIG_GURUPLUG_H */
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 41483a2f7e40..ba859a9a2499 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -56,9 +56,6 @@
*/
#ifdef CONFIG_IDE
#define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
-#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif /* CONFIG_IDE */
diff --git a/include/configs/nas220.h b/include/configs/nas220.h
index b95c7fc3be77..1fd5471ac5ff 100644
--- a/include/configs/nas220.h
+++ b/include/configs/nas220.h
@@ -80,14 +80,6 @@
#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_LZO
-/*
- * SATA
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
-#endif
-
/*
* EFI partition
*/
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index 1cb0d68b5af2..e38c65a48583 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -48,8 +48,6 @@
/* SATA driver configuration */
#ifdef CONFIG_IDE
#define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /* CONFIG_IDE */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index e1f8fb8ac84b..bb11fd66c467 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -63,9 +63,6 @@
*/
#ifdef CONFIG_IDE
#define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
-#define CONFIG_MVSATA_IDE_USE_PORT1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif /* CONFIG_IDE */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index c6a831249569..5e725f4dccec 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1096,8 +1096,6 @@ CONFIG_MVEBU_MMC
CONFIG_MVGBE_PORTS
CONFIG_MVMFP_V2
CONFIG_MVS
-CONFIG_MVSATA_IDE_USE_PORT0
-CONFIG_MVSATA_IDE_USE_PORT1
CONFIG_MV_ETH_RXQ
CONFIG_MV_I2C_NUM
CONFIG_MV_I2C_REG
--
2.17.1
More information about the U-Boot
mailing list