[PATCH 05/25] arm: imx: Remove MX23 support
Tom Rini
trini at konsulko.com
Tue Feb 9 14:02:57 CET 2021
As there are now no boards for the MX23 family, remove the general
support.
Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: NXP i.MX U-Boot Team <uboot-imx at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/Kconfig | 8 +-
arch/arm/Makefile | 2 +-
arch/arm/cpu/arm926ejs/mxs/Makefile | 1 -
arch/arm/cpu/arm926ejs/mxs/clock.c | 31 +-
arch/arm/cpu/arm926ejs/mxs/iomux.c | 7 +-
.../cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg | 5 -
arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 7 -
arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 31 +-
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 85 +----
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 +--
arch/arm/cpu/arm926ejs/mxs/timer.c | 12 +-
arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd | 18 -
arch/arm/include/asm/arch-mxs/imx-regs.h | 5 -
arch/arm/include/asm/arch-mxs/iomux-mx23.h | 349 ------------------
arch/arm/include/asm/arch-mxs/regs-base.h | 46 +--
.../include/asm/arch-mxs/regs-clkctrl-mx23.h | 209 -----------
.../include/asm/arch-mxs/regs-power-mx23.h | 344 -----------------
arch/arm/include/asm/arch-mxs/regs-ssp.h | 42 +--
arch/arm/include/asm/arch-mxs/regs-timrot.h | 97 +----
arch/arm/include/asm/arch-mxs/sys_proto.h | 17 +-
arch/arm/include/asm/mach-imx/dma.h | 14 +-
arch/arm/include/asm/mach-imx/regs-apbh.h | 115 +-----
arch/arm/include/asm/mach-imx/regs-lcdif.h | 12 -
arch/arm/mach-imx/mxs/Kconfig | 21 --
drivers/dma/apbh_dma.c | 5 +-
drivers/gpio/mxs_gpio.c | 12 +-
drivers/mmc/mxsmmc.c | 12 +-
drivers/spi/mxs_spi.c | 9 +-
include/configs/mxs.h | 14 +-
tools/Makefile | 5 +-
30 files changed, 44 insertions(+), 1541 deletions(-)
delete mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
delete mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
delete mode 100644 arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
delete mode 100644 arch/arm/include/asm/arch-mxs/iomux-mx23.h
delete mode 100644 arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
delete mode 100644 arch/arm/include/asm/arch-mxs/regs-power-mx23.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 95557d6ed6bd..f2a87c3caed8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -856,12 +856,6 @@ config ARCH_IMXRT
select SUPPORT_SPL
imply CMD_DM
-config ARCH_MX23
- bool "NXP i.MX23 family"
- select CPU_ARM926EJS
- select PL011_SERIAL
- select SUPPORT_SPL
-
config ARCH_MX25
bool "NXP MX25"
select CPU_ARM926EJS
@@ -2042,6 +2036,6 @@ source "arch/arm/Kconfig.debug"
endmenu
config SPL_LDSCRIPT
- default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK
+ default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX28 && !SPL_FRAMEWORK
default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 28b523b37c70..7c1bca7f9269 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -107,7 +107,7 @@ libs-y += arch/arm/cpu/
libs-y += arch/arm/lib/
ifeq ($(CONFIG_SPL_BUILD),y)
-ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imxrt))
+ifneq (,$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8 imxrt))
libs-y += arch/arm/mach-imx/
endif
else
diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile
index f60e61e4343f..f846a5400a3d 100644
--- a/arch/arm/cpu/arm926ejs/mxs/Makefile
+++ b/arch/arm/cpu/arm926ejs/mxs/Makefile
@@ -12,7 +12,6 @@ obj-y += spl_boot.o spl_lradc_init.o spl_mem_init.o spl_power_init.o
endif
# Specify the target for use in elftosb call
-MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx23.cfg
MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage$(CONFIG_SPL_FRAMEWORK:%=-spl).mx28.cfg
# Generate HAB-capable IVT
diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index 4e1cf3a1e32b..9aa6f83bb395 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -28,9 +28,7 @@
#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)
-#if defined(CONFIG_MX23)
-#define MXC_SSPCLK_MAX MXC_SSPCLK0
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define MXC_SSPCLK_MAX MXC_SSPCLK3
#endif
@@ -113,10 +111,7 @@ static uint32_t mxs_get_gpmiclk(void)
{
struct mxs_clkctrl_regs *clkctrl_regs =
(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-#if defined(CONFIG_MX23)
- uint8_t *reg =
- &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_CPU];
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
uint8_t *reg =
&clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_GPMI];
#endif
@@ -319,9 +314,7 @@ void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq)
if (freq == 0)
return;
-#if defined(CONFIG_MX23)
- writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr);
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr);
#endif
@@ -367,23 +360,7 @@ void mxs_set_lcdclk(uint32_t __maybe_unused lcd_base, uint32_t freq)
k_best /= 1000;
-#if defined(CONFIG_MX23)
- writeb(CLKCTRL_FRAC_CLKGATE,
- &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]);
- writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
- &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]);
- writeb(CLKCTRL_FRAC_CLKGATE,
- &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]);
-
- writel(CLKCTRL_PIX_CLKGATE,
- &clkctrl_regs->hw_clkctrl_pix_set);
- clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix,
- CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE,
- k_best << CLKCTRL_PIX_DIV_OFFSET);
-
- while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY)
- ;
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
writeb(CLKCTRL_FRAC_CLKGATE,
&clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]);
writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK),
diff --git a/arch/arm/cpu/arm926ejs/mxs/iomux.c b/arch/arm/cpu/arm926ejs/mxs/iomux.c
index 381264b8a18d..d212d0fa529d 100644
--- a/arch/arm/cpu/arm926ejs/mxs/iomux.c
+++ b/arch/arm/cpu/arm926ejs/mxs/iomux.c
@@ -13,14 +13,11 @@
#include <asm/arch/iomux.h>
#include <asm/arch/imx-regs.h>
-#if defined(CONFIG_MX23)
-#define DRIVE_OFFSET 0x200
-#define PULL_OFFSET 0x400
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define DRIVE_OFFSET 0x300
#define PULL_OFFSET 0x600
#else
-#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#error "Please select CONFIG_MX28"
#endif
/*
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
deleted file mode 100644
index ab2183ed3795..000000000000
--- a/arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
+++ /dev/null
@@ -1,5 +0,0 @@
-DISPLAYPROGRESS
-SECTION 0x0 BOOTABLE
- TAG LAST
- LOAD 0x1000 spl/u-boot-spl.bin
- CALL 0x1000 0x0
diff --git a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg b/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
deleted file mode 100644
index e7028092a2c3..000000000000
--- a/arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg
+++ /dev/null
@@ -1,7 +0,0 @@
-DISPLAYPROGRESS
-SECTION 0x0 BOOTABLE
- TAG LAST
- LOAD 0x1000 spl/u-boot-spl.bin
- CALL 0x1000 0x0
- LOAD 0x40002000 u-boot.bin
- CALL 0x40002000 0x0
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
index 1501d7df0dc6..d44167e4e90c 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c
@@ -39,42 +39,13 @@ void early_delay(int delay)
;
}
-#if defined(CONFIG_MX23)
-#define MUX_CONFIG_BOOTMODE_PAD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-static const iomux_cfg_t iomux_boot[] = {
- MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_BOOTMODE_PAD,
- MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_BOOTMODE_PAD,
- MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_BOOTMODE_PAD,
- MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_BOOTMODE_PAD,
- MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_BOOTMODE_PAD,
- MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_BOOTMODE_PAD,
-};
-#endif
-
static uint8_t mxs_get_bootmode_index(void)
{
uint8_t bootmode = 0;
int i;
uint8_t masked;
-#if defined(CONFIG_MX23)
- /* Setup IOMUX of bootmode pads to GPIO */
- mxs_iomux_setup_multiple_pads(iomux_boot, ARRAY_SIZE(iomux_boot));
-
- /* Setup bootmode pins as GPIO input */
- gpio_direction_input(MX23_PAD_LCD_D00__GPIO_1_0);
- gpio_direction_input(MX23_PAD_LCD_D01__GPIO_1_1);
- gpio_direction_input(MX23_PAD_LCD_D02__GPIO_1_2);
- gpio_direction_input(MX23_PAD_LCD_D03__GPIO_1_3);
- gpio_direction_input(MX23_PAD_LCD_D05__GPIO_1_5);
-
- /* Read bootmode pads */
- bootmode |= (gpio_get_value(MX23_PAD_LCD_D00__GPIO_1_0) ? 1 : 0) << 0;
- bootmode |= (gpio_get_value(MX23_PAD_LCD_D01__GPIO_1_1) ? 1 : 0) << 1;
- bootmode |= (gpio_get_value(MX23_PAD_LCD_D02__GPIO_1_2) ? 1 : 0) << 2;
- bootmode |= (gpio_get_value(MX23_PAD_LCD_D03__GPIO_1_3) ? 1 : 0) << 3;
- bootmode |= (gpio_get_value(MX23_PAD_LCD_D05__GPIO_1_5) ? 1 : 0) << 5;
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
/* The global boot mode will be detected by ROM code and its value
* is stored at the fixed address 0x00019BF0 in OCRAM.
*/
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index a94803ee93d9..c56b620f1ffa 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -71,21 +71,6 @@ __weak uint32_t mxs_dram_vals[] = {
0x00040004, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0xffffffff
-/*
- * i.MX23 DDR at 133MHz
- */
-#elif defined(CONFIG_MX23)
- 0x01010001, 0x00010100, 0x01000101, 0x00000001,
- 0x00000101, 0x00000000, 0x00010000, 0x01000001,
- 0x00000000, 0x00000001, 0x07000200, 0x00070202,
- 0x02020000, 0x04040a01, 0x00000201, 0x02040000,
- 0x02000000, 0x19000f08, 0x0d0d0000, 0x02021313,
- 0x02061521, 0x0000000a, 0x00080008, 0x00200020,
- 0x00200020, 0x00200020, 0x000003f7, 0x00000000,
- 0x00000000, 0x00000020, 0x00000020, 0x00c80000,
- 0x000a23cd, 0x000000c8, 0x00006665, 0x00000000,
- 0x00000101, 0x00040001, 0x00000000, 0x00000000,
- 0x00010000
#else
#error Unsupported memory initialization
#endif
@@ -144,10 +129,7 @@ static void mxs_mem_init_clock(void)
{
struct mxs_clkctrl_regs *clkctrl_regs =
(struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
-#if defined(CONFIG_MX23)
- /* Fractional divider for ref_emi is 33 ; 480 * 18 / 33 = 266MHz */
- const unsigned char divider = 33;
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
/* Fractional divider for ref_emi is 21 ; 480 * 18 / 21 = 411MHz */
const unsigned char divider = 21;
#endif
@@ -247,67 +229,6 @@ uint32_t mxs_mem_get_size(void)
return sz;
}
-#ifdef CONFIG_MX23
-static void mx23_mem_setup_vddmem(void)
-{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
- debug("SPL: Setting mx23 VDDMEM\n");
-
- /* We must wait before and after disabling the current limiter! */
- early_delay(10000);
-
- clrbits_le32(&power_regs->hw_power_vddmemctrl,
- POWER_VDDMEMCTRL_ENABLE_ILIMIT);
-
- early_delay(10000);
-
-}
-
-static void mx23_mem_init(void)
-{
- debug("SPL: Initialising mx23 SDRAM Controller\n");
-
- /*
- * Reset/ungate the EMI block. This is essential, otherwise the system
- * suffers from memory instability. This thing is mx23 specific and is
- * no longer present on mx28.
- */
- mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE);
-
- mx23_mem_setup_vddmem();
-
- /*
- * Configure the DRAM registers
- */
-
- /* Clear START and SREFRESH bit from DRAM_CTL8 */
- clrbits_le32(MXS_DRAM_BASE + 0x20, (1 << 16) | (1 << 8));
-
- initialize_dram_values();
-
- /* Set START bit in DRAM_CTL8 */
- setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16);
-
- clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17);
-
- /* Wait for EMI_STAT bit DRAM_HALTED */
- for (;;) {
- if (!(readl(MXS_EMI_BASE + 0x10) & (1 << 1)))
- break;
- early_delay(1000);
- }
-
- /* Adjust EMI port priority. */
- clrsetbits_le32(0x80020000, 0x1f << 16, 0x2);
- early_delay(20000);
-
- setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19);
- setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11);
-}
-#endif
-
#ifdef CONFIG_MX28
static void mx28_mem_init(void)
{
@@ -349,9 +270,7 @@ void mxs_mem_init(void)
mxs_mem_setup_vdda();
-#if defined(CONFIG_MX23)
- mx23_mem_init();
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
mx28_mem_init();
#endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index 35ea71a5ba89..095ad9230fa8 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -939,13 +939,6 @@ static void mxs_power_configure_power_source(void)
mxs_init_batt_bo();
mxs_switch_vddd_to_dcdc_source();
-
-#ifdef CONFIG_MX23
- /* Fire up the VDDMEM LinReg now that we're all set. */
- debug("SPL: Enabling mx23 VDDMEM linear regulator\n");
- writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
- &power_regs->hw_power_vddmemctrl);
-#endif
}
/**
@@ -1065,9 +1058,7 @@ struct mxs_vddx_cfg {
static const struct mxs_vddx_cfg mxs_vddio_cfg = {
.reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
hw_power_vddioctrl),
-#if defined(CONFIG_MX23)
- .step_mV = 25,
-#else
+#if defined(CONFIG_MX28)
.step_mV = 50,
#endif
.lowest_mV = 2800,
@@ -1092,21 +1083,6 @@ static const struct mxs_vddx_cfg mxs_vddd_cfg = {
.bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET,
};
-#ifdef CONFIG_MX23
-static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
- .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
- hw_power_vddmemctrl),
- .step_mV = 50,
- .lowest_mV = 1700,
- .powered_by_linreg = NULL,
- .trg_mask = POWER_VDDMEMCTRL_TRG_MASK,
- .bo_irq = 0,
- .bo_enirq = 0,
- .bo_offset_mask = 0,
- .bo_offset_offset = 0,
-};
-#endif
-
/**
* mxs_power_set_vddx() - Configure voltage on DC-DC converter rail
* @cfg: Configuration data of the DC-DC converter rail
@@ -1210,24 +1186,6 @@ static void mxs_setup_batt_detect(void)
early_delay(10);
}
-/**
- * mxs_ungate_power() - Ungate the POWER block
- *
- * This function ungates clock to the power block. In case the power block
- * was still gated at this point, it will not be possible to configure the
- * block and therefore the power initialization would fail. This function
- * is only needed on i.MX233, on i.MX28 the power block is always ungated.
- */
-static void mxs_ungate_power(void)
-{
-#ifdef CONFIG_MX23
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
- writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
-#endif
-}
-
/**
* mxs_power_init() - The power block init main function
*
@@ -1241,8 +1199,6 @@ void mxs_power_init(void)
debug("SPL: Initialising Power Block\n");
- mxs_ungate_power();
-
mxs_power_clock2xtal();
mxs_power_set_auto_restart();
mxs_power_set_linreg();
@@ -1258,10 +1214,6 @@ void mxs_power_init(void)
debug("SPL: Setting VDDD to 1V55 (brownout @ 1v400)\n");
mxs_power_set_vddx(&mxs_vddd_cfg, 1550, 1400);
-#ifdef CONFIG_MX23
- debug("SPL: Setting mx23 VDDMEM to 2V5 (brownout @ 1v7)\n");
- mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
-#endif
writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c
index 5ab4ed0c5a3d..a5dd9a838e87 100644
--- a/arch/arm/cpu/arm926ejs/mxs/timer.c
+++ b/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -18,9 +18,7 @@
#include <linux/delay.h>
/* Maximum fixed count */
-#if defined(CONFIG_MX23)
-#define TIMER_LOAD_VAL 0xffff
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMER_LOAD_VAL 0xffffffff
#endif
@@ -59,9 +57,7 @@ int timer_init(void)
mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
/* Set fixed_count to 0 */
-#if defined(CONFIG_MX23)
- writel(0, &timrot_regs->hw_timrot_timcount0);
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
writel(0, &timrot_regs->hw_timrot_fixed_count0);
#endif
@@ -71,9 +67,7 @@ int timer_init(void)
&timrot_regs->hw_timrot_timctrl0);
/* Set fixed_count to maximal value */
-#if defined(CONFIG_MX23)
- writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0);
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
#endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
deleted file mode 100644
index 3a51879d5e4a..000000000000
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd
+++ /dev/null
@@ -1,18 +0,0 @@
-options {
- driveTag = 0x00;
- flags = 0x01;
-}
-
-sources {
- u_boot_spl="spl/u-boot-spl.bin";
- u_boot="u-boot.bin";
-}
-
-section (0) {
- load u_boot_spl > 0x0000;
- load ivt (entry = 0x0014) > 0x8000;
- call 0x8000;
-
- load u_boot > 0x40000100;
- call 0x40000100;
-}
diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h
index f853c484be7d..c099c65c9608 100644
--- a/arch/arm/include/asm/arch-mxs/imx-regs.h
+++ b/arch/arm/include/asm/arch-mxs/imx-regs.h
@@ -25,11 +25,6 @@
#include <asm/arch/regs-usb.h>
#include <asm/arch/regs-usbphy.h>
-#ifdef CONFIG_MX23
-#include <asm/arch/regs-clkctrl-mx23.h>
-#include <asm/arch/regs-power-mx23.h>
-#endif
-
#ifdef CONFIG_MX28
#include <asm/arch/regs-clkctrl-mx28.h>
#include <asm/arch/regs-power-mx28.h>
diff --git a/arch/arm/include/asm/arch-mxs/iomux-mx23.h b/arch/arm/include/asm/arch-mxs/iomux-mx23.h
deleted file mode 100644
index 2706efa750a2..000000000000
--- a/arch/arm/include/asm/arch-mxs/iomux-mx23.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria at canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- */
-
-#ifndef __MACH_IOMUX_MX23_H__
-#define __MACH_IOMUX_MX23_H__
-
-#include <asm/arch/iomux.h>
-
-/*
- * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
- * See also iomux.h
- *
- * BANK PIN MUX
- */
-/* MUXSEL_0 */
-#define MX23_PAD_GPMI_D00__GPMI_D00 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D01__GPMI_D01 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D02__GPMI_D02 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D03__GPMI_D03 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D04__GPMI_D04 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D05__GPMI_D05 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D06__GPMI_D06 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D07__GPMI_D07 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D08__GPMI_D08 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D09__GPMI_D09 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D10__GPMI_D10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D11__GPMI_D11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D12__GPMI_D12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D13__GPMI_D13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D14__GPMI_D14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_D15__GPMI_D15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY0__GPMI_RDY0 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY1__GPMI_RDY1 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY2__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDY3__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WPN__GPMI_WPN MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
-#define MX23_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SCL__I2C_SCL MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
-#define MX23_PAD_I2C_SDA__I2C_SDA MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_LCD_D00__LCD_D00 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D01__LCD_D01 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D02__LCD_D02 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D03__LCD_D03 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D04__LCD_D04 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D05__LCD_D05 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D06__LCD_D06 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D07__LCD_D07 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D08__LCD_D08 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D09__LCD_D09 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_WR__LCD_WR MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_DOTCK__LCD_DOTCK MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
-#define MX23_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
-#define MX23_PAD_PWM0__PWM0 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
-#define MX23_PAD_PWM1__PWM1 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
-#define MX23_PAD_PWM2__PWM2 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
-#define MX23_PAD_PWM3__PWM3 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
-#define MX23_PAD_PWM4__PWM4 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
-
-#define MX23_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DETECT__SSP1_DETECT MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA0__SSP1_DATA0 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA1__SSP1_DATA1 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA2__SSP1_DATA2 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_DATA3__SSP1_DATA3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
-#define MX23_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYA__ROTARYA MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
-#define MX23_PAD_ROTARYB__ROTARYB MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A00__EMI_A00 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A01__EMI_A01 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A02__EMI_A02 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A03__EMI_A03 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A04__EMI_A04 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A05__EMI_A05 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A06__EMI_A06 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A07__EMI_A07 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A08__EMI_A08 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A09__EMI_A09 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A10__EMI_A10 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A11__EMI_A11 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_A12__EMI_A12 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
-#define MX23_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
-
-#define MX23_PAD_EMI_D00__EMI_D00 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D01__EMI_D01 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D02__EMI_D02 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D03__EMI_D03 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D04__EMI_D04 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D05__EMI_D05 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D06__EMI_D06 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D07__EMI_D07 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D08__EMI_D08 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D09__EMI_D09 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D10__EMI_D10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D11__EMI_D11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D12__EMI_D12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D13__EMI_D13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D14__EMI_D14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_D15__EMI_D15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
-#define MX23_PAD_EMI_CLKN__EMI_CLKN MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
-
-/* MUXSEL_1 */
-#define MX23_PAD_GPMI_D00__LCD_D8 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D01__LCD_D9 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D02__LCD_D10 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D03__LCD_D11 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D04__LCD_D12 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D05__LCD_D13 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D06__LCD_D14 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D07__LCD_D15 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D08__LCD_D18 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D09__LCD_D19 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D10__LCD_D20 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D11__LCD_D21 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D12__LCD_D22 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D13__LCD_D23 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D14__AUART2_RX MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_D15__AUART2_TX MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CLE__LCD_D16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_ALE__LCD_D17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
-#define MX23_PAD_GPMI_CE2N__ATA_A2 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RTS__IR_CLK MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_RX__IR_RX MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
-#define MX23_PAD_AUART1_TX__IR_TX MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SCL__GPMI_RDY2 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
-#define MX23_PAD_I2C_SDA__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
-
-#define MX23_PAD_LCD_D00__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D01__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D02__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D03__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D04__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D05__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D06__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D07__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D08__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D09__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D10__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D11__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D12__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D13__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D14__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_D15__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RESET__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_RS__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_DOTCK__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_ENABLE__I2C_SCL MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_HSYNC__I2C_SDA MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
-#define MX23_PAD_LCD_VSYNC__LCD_BUSY MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
-#define MX23_PAD_PWM0__ROTARYA MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
-#define MX23_PAD_PWM1__ROTARYB MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
-#define MX23_PAD_PWM2__GPMI_RDY3 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
-#define MX23_PAD_PWM3__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
-#define MX23_PAD_PWM4__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
-
-#define MX23_PAD_SSP1_DETECT__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA1__I2C_SCL MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_1)
-#define MX23_PAD_SSP1_DATA2__I2C_SDA MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYA__AUART2_RTS MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
-#define MX23_PAD_ROTARYB__AUART2_CTS MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_1)
-
-/* MUXSEL_2 */
-#define MX23_PAD_GPMI_D00__SSP2_DATA0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D01__SSP2_DATA1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D02__SSP2_DATA2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D03__SSP2_DATA3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D04__SSP2_DATA4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D05__SSP2_DATA5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D06__SSP2_DATA6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D07__SSP2_DATA7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D08__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D09__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D10__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D11__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_D15__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY0__SSP2_DETECT MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_RDY1__SSP2_CMD MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
-#define MX23_PAD_GPMI_WRN__SSP2_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_CTS__SSP1_DATA4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RTS__SSP1_DATA5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_RX__SSP1_DATA6 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
-#define MX23_PAD_AUART1_TX__SSP1_DATA7 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SCL__AUART1_TX MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
-#define MX23_PAD_I2C_SDA__AUART1_RX MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
-
-#define MX23_PAD_LCD_D08__SAIF2_SDATA0 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D09__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D11__SAIF_LRCLK MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D12__SAIF2_SDATA1 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D13__SAIF2_SDATA2 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D14__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D15__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
-#define MX23_PAD_LCD_RESET__GPMI_CE3N MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
-#define MX23_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
-#define MX23_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
-#define MX23_PAD_PWM3__AUART1_CTS MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
-#define MX23_PAD_PWM4__AUART1_RTS MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
-
-#define MX23_PAD_SSP1_CMD__JTAG_TDO MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DETECT__USB_OTG_ID MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA0__JTAG_TDI MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA1__JTAG_TCLK MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA2__JTAG_RTCK MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_DATA3__JTAG_TMS MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_2)
-#define MX23_PAD_SSP1_SCK__JTAG_TRST MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYA__SPDIF MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_2)
-#define MX23_PAD_ROTARYB__GPMI_CE3N MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_2)
-
-/* MUXSEL_GPIO */
-#define MX23_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D08__GPIO_0_8 MXS_IOMUX_PAD_NAKED(0, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D09__GPIO_0_9 MXS_IOMUX_PAD_NAKED(0, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D10__GPIO_0_10 MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D11__GPIO_0_11 MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D12__GPIO_0_12 MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D13__GPIO_0_13 MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D14__GPIO_0_14 MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_D15__GPIO_0_15 MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CLE__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_ALE__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY0__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY1__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY2__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDY3__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WPN__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_WRN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_RDN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_CTS__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RTS__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_RX__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_AUART1_TX__GPIO_0_29 MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SCL__GPIO_0_30 MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_I2C_SDA__GPIO_0_31 MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RESET__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_RS__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_WR__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_CS__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_DOTCK__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_ENABLE__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_HSYNC__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_LCD_VSYNC__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM0__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM1__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM2__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM3__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_PWM4__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
-
-#define MX23_PAD_SSP1_CMD__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DETECT__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA0__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA1__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA2__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_DATA3__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
-#define MX23_PAD_SSP1_SCK__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYA__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
-#define MX23_PAD_ROTARYB__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A00__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A01__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A02__GPIO_2_11 MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A03__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A04__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A05__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A06__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A07__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A08__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A09__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A10__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A11__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_A12__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA0__GPIO_2_22 MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_BA1__GPIO_2_23 MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CASN__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE0N__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CE1N__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE1N__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
-#define MX23_PAD_GPMI_CE0N__GPIO_2_28 MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_CKE__GPIO_2_29 MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_RASN__GPIO_2_30 MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
-#define MX23_PAD_EMI_WEN__GPIO_2_31 MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
-
-#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/include/asm/arch-mxs/regs-base.h b/arch/arm/include/asm/arch-mxs/regs-base.h
index 44d40cade879..c016d1b25534 100644
--- a/arch/arm/include/asm/arch-mxs/regs-base.h
+++ b/arch/arm/include/asm/arch-mxs/regs-base.h
@@ -14,52 +14,10 @@
#ifndef __MXS_REGS_BASE_H__
#define __MXS_REGS_BASE_H__
-/*
- * Register base addresses for i.MX23
- */
-#if defined(CONFIG_MX23)
-#define MXS_ICOLL_BASE 0x80000000
-#define MXS_APBH_BASE 0x80004000
-#define MXS_ECC8_BASE 0x80008000
-#define MXS_BCH_BASE 0x8000A000
-#define MXS_GPMI_BASE 0x8000C000
-#define MXS_SSP0_BASE 0x80010000
-#define MXS_SSP1_BASE 0x80034000
-#define MXS_ETM_BASE 0x80014000
-#define MXS_PINCTRL_BASE 0x80018000
-#define MXS_DIGCTL_BASE 0x8001C000
-#define MXS_EMI_BASE 0x80020000
-#define MXS_APBX_BASE 0x80024000
-#define MXS_DCP_BASE 0x80028000
-#define MXS_PXP_BASE 0x8002A000
-#define MXS_OCOTP_BASE 0x8002C000
-#define MXS_AXI_BASE 0x8002E000
-#define MXS_LCDIF_BASE 0x80030000
-#define MXS_SSP1_BASE 0x80034000
-#define MXS_TVENC_BASE 0x80038000
-#define MXS_CLKCTRL_BASE 0x80040000
-#define MXS_SAIF0_BASE 0x80042000
-#define MXS_POWER_BASE 0x80044000
-#define MXS_SAIF1_BASE 0x80046000
-#define MXS_AUDIOOUT_BASE 0x80048000
-#define MXS_AUDIOIN_BASE 0x8004C000
-#define MXS_LRADC_BASE 0x80050000
-#define MXS_SPDIF_BASE 0x80054000
-#define MXS_I2C0_BASE 0x80058000
-#define MXS_RTC_BASE 0x8005C000
-#define MXS_PWM_BASE 0x80064000
-#define MXS_TIMROT_BASE 0x80068000
-#define MXS_UARTAPP0_BASE 0x8006C000
-#define MXS_UARTAPP1_BASE 0x8006E000
-#define MXS_UARTDBG_BASE 0x80070000
-#define MXS_USBPHY0_BASE 0x8007C000
-#define MXS_USBCTRL0_BASE 0x80080000
-#define MXS_DRAM_BASE 0x800E0000
-
/*
* Register base addresses for i.MX28
*/
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define MXS_ICOL_BASE 0x80000000
#define MXS_HSADC_BASE 0x80002000
#define MXS_APBH_BASE 0x80004000
@@ -114,7 +72,7 @@
#define MXS_ENET0_BASE 0x800F0000
#define MXS_ENET1_BASE 0x800F4000
#else
-#error Unkown SoC. Please set CONFIG_MX23 or CONFIG_MX28
+#error Unkown SoC. Please set CONFIG_MX28
#endif
#endif /* __MXS_REGS_BASE_H__ */
diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
deleted file mode 100644
index 50fdc9cd0326..000000000000
--- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h
+++ /dev/null
@@ -1,209 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Freescale i.MX23 CLKCTRL Register Definitions
- *
- * Copyright (C) 2012 Marek Vasut <marek.vasut at gmail.com>
- * on behalf of DENX Software Engineering GmbH
- *
- * Based on code from LTIB:
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-#ifndef __MX23_REGS_CLKCTRL_H__
-#define __MX23_REGS_CLKCTRL_H__
-
-#include <asm/mach-imx/regs-common.h>
-
-#ifndef __ASSEMBLY__
-struct mxs_clkctrl_regs {
- mxs_reg_32(hw_clkctrl_pll0ctrl0) /* 0x00 */
- uint32_t hw_clkctrl_pll0ctrl1; /* 0x10 */
- uint32_t reserved_pll0ctrl1[3]; /* 0x14-0x1c */
- mxs_reg_32(hw_clkctrl_cpu) /* 0x20 */
- mxs_reg_32(hw_clkctrl_hbus) /* 0x30 */
- mxs_reg_32(hw_clkctrl_xbus) /* 0x40 */
- mxs_reg_32(hw_clkctrl_xtal) /* 0x50 */
- mxs_reg_32(hw_clkctrl_pix) /* 0x60 */
- uint32_t hw_clkctrl_ssp0; /* 0x70 */
- uint32_t reserved_ssp0[3]; /* 0x74-0x7c */
- uint32_t hw_clkctrl_gpmi; /* 0x80 */
- uint32_t reserved_gpmi[3]; /* 0x84-0x8c */
- mxs_reg_32(hw_clkctrl_spdif) /* 0x90 */
- mxs_reg_32(hw_clkctrl_emi) /* 0xa0 */
-
- uint32_t reserved1[4];
-
- mxs_reg_32(hw_clkctrl_saif0) /* 0xc0 */
- mxs_reg_32(hw_clkctrl_tv) /* 0xd0 */
- mxs_reg_32(hw_clkctrl_etm) /* 0xe0 */
- mxs_reg_8(hw_clkctrl_frac0) /* 0xf0 */
- mxs_reg_8(hw_clkctrl_frac1) /* 0x100 */
- mxs_reg_32(hw_clkctrl_clkseq) /* 0x110 */
- mxs_reg_32(hw_clkctrl_reset) /* 0x120 */
- mxs_reg_32(hw_clkctrl_status) /* 0x130 */
- mxs_reg_32(hw_clkctrl_version) /* 0x140 */
-};
-#endif
-
-#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
-#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28
-#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
-#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
-#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
-#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
-#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24)
-#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24
-#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24)
-#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
-#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
-#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
-#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20)
-#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20
-#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
-#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20)
-#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20)
-#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
-#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18)
-#define CLKCTRL_PLL0CTRL0_POWER (1 << 16)
-
-#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31)
-#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30)
-#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff
-#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0
-
-#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29)
-#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28)
-#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26)
-#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16)
-#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16
-#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12)
-#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10)
-#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f
-#define CLKCTRL_CPU_DIV_CPU_OFFSET 0
-
-#define CLKCTRL_HBUS_BUSY (1 << 29)
-#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 28)
-#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 27)
-#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26)
-#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25)
-#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24)
-#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23)
-#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22)
-#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21)
-#define CLKCTRL_HBUS_AUTO_SLOW_MODE (1 << 20)
-#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16)
-#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16
-#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16)
-#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16)
-#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16)
-#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16)
-#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16)
-#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16)
-#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5)
-#define CLKCTRL_HBUS_DIV_MASK 0x1f
-#define CLKCTRL_HBUS_DIV_OFFSET 0
-
-#define CLKCTRL_XBUS_BUSY (1 << 31)
-#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10)
-#define CLKCTRL_XBUS_DIV_MASK 0x3ff
-#define CLKCTRL_XBUS_DIV_OFFSET 0
-
-#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31)
-#define CLKCTRL_XTAL_FILT_CLK24M_GATE (1 << 30)
-#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29)
-#define CLKCTRL_XTAL_DRI_CLK24M_GATE (1 << 28)
-#define CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE (1 << 27)
-#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26)
-#define CLKCTRL_XTAL_DIV_UART_MASK 0x3
-#define CLKCTRL_XTAL_DIV_UART_OFFSET 0
-
-#define CLKCTRL_PIX_CLKGATE (1 << 31)
-#define CLKCTRL_PIX_BUSY (1 << 29)
-#define CLKCTRL_PIX_DIV_FRAC_EN (1 << 12)
-#define CLKCTRL_PIX_DIV_MASK 0xfff
-#define CLKCTRL_PIX_DIV_OFFSET 0
-
-#define CLKCTRL_SSP_CLKGATE (1 << 31)
-#define CLKCTRL_SSP_BUSY (1 << 29)
-#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9)
-#define CLKCTRL_SSP_DIV_MASK 0x1ff
-#define CLKCTRL_SSP_DIV_OFFSET 0
-
-#define CLKCTRL_GPMI_CLKGATE (1 << 31)
-#define CLKCTRL_GPMI_BUSY (1 << 29)
-#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10)
-#define CLKCTRL_GPMI_DIV_MASK 0x3ff
-#define CLKCTRL_GPMI_DIV_OFFSET 0
-
-#define CLKCTRL_SPDIF_CLKGATE (1 << 31)
-
-#define CLKCTRL_EMI_CLKGATE (1 << 31)
-#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30)
-#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29)
-#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28)
-#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27)
-#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26)
-#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17)
-#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16)
-#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8)
-#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8
-#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f
-#define CLKCTRL_EMI_DIV_EMI_OFFSET 0
-
-#define CLKCTRL_IR_CLKGATE (1 << 31)
-#define CLKCTRL_IR_AUTO_DIV (1 << 29)
-#define CLKCTRL_IR_IR_BUSY (1 << 28)
-#define CLKCTRL_IR_IROV_BUSY (1 << 27)
-#define CLKCTRL_IR_IROV_DIV_MASK (0x1ff << 16)
-#define CLKCTRL_IR_IROV_DIV_OFFSET 16
-#define CLKCTRL_IR_IR_DIV_MASK 0x3ff
-#define CLKCTRL_IR_IR_DIV_OFFSET 0
-
-#define CLKCTRL_SAIF0_CLKGATE (1 << 31)
-#define CLKCTRL_SAIF0_BUSY (1 << 29)
-#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16)
-#define CLKCTRL_SAIF0_DIV_MASK 0xffff
-#define CLKCTRL_SAIF0_DIV_OFFSET 0
-
-#define CLKCTRL_TV_CLK_TV108M_GATE (1 << 31)
-#define CLKCTRL_TV_CLK_TV_GATE (1 << 30)
-
-#define CLKCTRL_ETM_CLKGATE (1 << 31)
-#define CLKCTRL_ETM_BUSY (1 << 29)
-#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 6)
-#define CLKCTRL_ETM_DIV_MASK 0x3f
-#define CLKCTRL_ETM_DIV_OFFSET 0
-
-#define CLKCTRL_FRAC_CLKGATE (1 << 7)
-#define CLKCTRL_FRAC_STABLE (1 << 6)
-#define CLKCTRL_FRAC_FRAC_MASK 0x3f
-#define CLKCTRL_FRAC_FRAC_OFFSET 0
-#define CLKCTRL_FRAC0_CPU 0
-#define CLKCTRL_FRAC0_EMI 1
-#define CLKCTRL_FRAC0_PIX 2
-#define CLKCTRL_FRAC0_IO0 3
-#define CLKCTRL_FRAC1_VID 3
-
-#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
-#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 7)
-#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 6)
-#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 5)
-#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 4)
-#define CLKCTRL_CLKSEQ_BYPASS_IR (1 << 3)
-#define CLKCTRL_CLKSEQ_BYPASS_PIX (1 << 1)
-#define CLKCTRL_CLKSEQ_BYPASS_SAIF (1 << 0)
-
-#define CLKCTRL_RESET_CHIP (1 << 1)
-#define CLKCTRL_RESET_DIG (1 << 0)
-
-#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30)
-#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30
-
-#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24)
-#define CLKCTRL_VERSION_MAJOR_OFFSET 24
-#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16)
-#define CLKCTRL_VERSION_MINOR_OFFSET 16
-#define CLKCTRL_VERSION_STEP_MASK 0xffff
-#define CLKCTRL_VERSION_STEP_OFFSET 0
-
-#endif /* __MX23_REGS_CLKCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h b/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
deleted file mode 100644
index a0dc78102301..000000000000
--- a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h
+++ /dev/null
@@ -1,344 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Freescale i.MX23 Power Controller Register Definitions
- *
- * Copyright (C) 2012 Marek Vasut <marex at denx.de>
- */
-
-#ifndef __MX23_REGS_POWER_H__
-#define __MX23_REGS_POWER_H__
-
-#include <asm/mach-imx/regs-common.h>
-
-#ifndef __ASSEMBLY__
-struct mxs_power_regs {
- mxs_reg_32(hw_power_ctrl)
- mxs_reg_32(hw_power_5vctrl)
- mxs_reg_32(hw_power_minpwr)
- mxs_reg_32(hw_power_charge)
- uint32_t hw_power_vdddctrl;
- uint32_t reserved_vddd[3];
- uint32_t hw_power_vddactrl;
- uint32_t reserved_vdda[3];
- uint32_t hw_power_vddioctrl;
- uint32_t reserved_vddio[3];
- uint32_t hw_power_vddmemctrl;
- uint32_t reserved_vddmem[3];
- uint32_t hw_power_dcdc4p2;
- uint32_t reserved_dcdc4p2[3];
- uint32_t hw_power_misc;
- uint32_t reserved_misc[3];
- uint32_t hw_power_dclimits;
- uint32_t reserved_dclimits[3];
- mxs_reg_32(hw_power_loopctrl)
- uint32_t hw_power_sts;
- uint32_t reserved_sts[3];
- mxs_reg_32(hw_power_speed)
- uint32_t hw_power_battmonitor;
- uint32_t reserved_battmonitor[3];
-
- uint32_t reserved1[4];
-
- mxs_reg_32(hw_power_reset)
-
- uint32_t reserved2[4];
-
- mxs_reg_32(hw_power_special)
- mxs_reg_32(hw_power_version)
-};
-#endif
-
-#define POWER_CTRL_CLKGATE (1 << 30)
-#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27)
-#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24)
-#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23)
-#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22)
-#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21)
-#define POWER_CTRL_PSWITCH_IRQ (1 << 20)
-#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19)
-#define POWER_CTRL_POLARITY_PSWITCH (1 << 18)
-#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17)
-#define POWER_CTRL_POLARITY_DC_OK (1 << 16)
-#define POWER_CTRL_DC_OK_IRQ (1 << 15)
-#define POWER_CTRL_ENIRQ_DC_OK (1 << 14)
-#define POWER_CTRL_BATT_BO_IRQ (1 << 13)
-#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12)
-#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11)
-#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10)
-#define POWER_CTRL_VDDA_BO_IRQ (1 << 9)
-#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8)
-#define POWER_CTRL_VDDD_BO_IRQ (1 << 7)
-#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6)
-#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5)
-#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4)
-#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3)
-#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2)
-#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1)
-#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0)
-
-#define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 28)
-#define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 28
-#define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 28)
-#define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 28)
-#define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 28)
-#define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 28)
-#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24)
-#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24
-#define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x1 << 20)
-#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20
-#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12)
-#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12
-#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8
-#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8)
-#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8)
-#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7)
-#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6)
-#define POWER_5VCTRL_DCDC_XFER (1 << 5)
-#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4)
-#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3)
-#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2)
-#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1)
-#define POWER_5VCTRL_ENABLE_DCDC (1 << 0)
-
-#define POWER_MINPWR_LOWPWR_4P2 (1 << 14)
-#define POWER_MINPWR_VDAC_DUMP_CTRL (1 << 13)
-#define POWER_MINPWR_PWD_BO (1 << 12)
-#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11)
-#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10)
-#define POWER_MINPWR_ENABLE_OSC (1 << 9)
-#define POWER_MINPWR_SELECT_OSC (1 << 8)
-#define POWER_MINPWR_VBG_OFF (1 << 7)
-#define POWER_MINPWR_DOUBLE_FETS (1 << 6)
-#define POWER_MINPWR_HALFFETS (1 << 5)
-#define POWER_MINPWR_LESSANA_I (1 << 4)
-#define POWER_MINPWR_PWD_XTAL24 (1 << 3)
-#define POWER_MINPWR_DC_STOPCLK (1 << 2)
-#define POWER_MINPWR_EN_DC_PFM (1 << 1)
-#define POWER_MINPWR_DC_HALFCLK (1 << 0)
-
-#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24)
-#define POWER_CHARGE_ADJ_VOLT_OFFSET 24
-#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24)
-#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24)
-#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24)
-#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24)
-#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24)
-#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24)
-#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24)
-#define POWER_CHARGE_ENABLE_LOAD (1 << 22)
-#define POWER_CHARGE_ENABLE_CHARGER_RESISTORS (1 << 21)
-#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20)
-#define POWER_CHARGE_CHRG_STS_OFF (1 << 19)
-#define POWER_CHARGE_USE_EXTERN_R (1 << 17)
-#define POWER_CHARGE_PWD_BATTCHRG (1 << 16)
-#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8)
-#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8
-#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8)
-#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8)
-#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8)
-#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8)
-#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f
-#define POWER_CHARGE_BATTCHRG_I_OFFSET 0
-#define POWER_CHARGE_BATTCHRG_I_10MA 0x01
-#define POWER_CHARGE_BATTCHRG_I_20MA 0x02
-#define POWER_CHARGE_BATTCHRG_I_50MA 0x04
-#define POWER_CHARGE_BATTCHRG_I_100MA 0x08
-#define POWER_CHARGE_BATTCHRG_I_200MA 0x10
-#define POWER_CHARGE_BATTCHRG_I_400MA 0x20
-
-#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28)
-#define POWER_VDDDCTRL_ADJTN_OFFSET 28
-#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23)
-#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22)
-#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21)
-#define POWER_VDDDCTRL_DISABLE_FET (1 << 20)
-#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16)
-#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16
-#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16)
-#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16)
-#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16)
-#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16)
-#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8)
-#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8
-#define POWER_VDDDCTRL_TRG_MASK 0x1f
-#define POWER_VDDDCTRL_TRG_OFFSET 0
-
-#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19)
-#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18)
-#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17)
-#define POWER_VDDACTRL_DISABLE_FET (1 << 16)
-#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12)
-#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12
-#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
-#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
-#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
-#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
-#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8)
-#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8
-#define POWER_VDDACTRL_TRG_MASK 0x1f
-#define POWER_VDDACTRL_TRG_OFFSET 0
-
-#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20)
-#define POWER_VDDIOCTRL_ADJTN_OFFSET 20
-#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18)
-#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17)
-#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16)
-#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12)
-#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12
-#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
-#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
-#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
-#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
-#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8)
-#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8
-#define POWER_VDDIOCTRL_TRG_MASK 0x1f
-#define POWER_VDDIOCTRL_TRG_OFFSET 0
-
-#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10)
-#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9)
-#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8)
-#define POWER_VDDMEMCTRL_TRG_MASK 0x1f
-#define POWER_VDDMEMCTRL_TRG_OFFSET 0
-
-#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28)
-#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28
-#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30)
-#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30)
-#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30)
-#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30)
-#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28)
-#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28)
-#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28)
-#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24)
-#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24
-#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23)
-#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22)
-#define POWER_DCDC4P2_HYST_DIR (1 << 21)
-#define POWER_DCDC4P2_HYST_THRESH (1 << 20)
-#define POWER_DCDC4P2_TRG_MASK (0x7 << 16)
-#define POWER_DCDC4P2_TRG_OFFSET 16
-#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16)
-#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16)
-#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16)
-#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16)
-#define POWER_DCDC4P2_TRG_BATT (0x4 << 16)
-#define POWER_DCDC4P2_BO_MASK (0x1f << 8)
-#define POWER_DCDC4P2_BO_OFFSET 8
-#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f
-#define POWER_DCDC4P2_CMPTRIP_OFFSET 0
-
-#define POWER_MISC_FREQSEL_MASK (0x7 << 4)
-#define POWER_MISC_FREQSEL_OFFSET 4
-#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4)
-#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4)
-#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4)
-#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4)
-#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4)
-#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4)
-#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4)
-#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3)
-#define POWER_MISC_DELAY_TIMING (1 << 2)
-#define POWER_MISC_TEST (1 << 1)
-#define POWER_MISC_SEL_PLLCLK (1 << 0)
-
-#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8)
-#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8
-#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f
-#define POWER_DCLIMITS_NEGLIMIT_OFFSET 0
-
-#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20)
-#define POWER_LOOPCTRL_HYST_SIGN (1 << 19)
-#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18)
-#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17)
-#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16)
-#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15)
-#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14)
-#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12)
-#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12
-#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12)
-#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12)
-#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12)
-#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12)
-#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8)
-#define POWER_LOOPCTRL_DC_FF_OFFSET 8
-#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4)
-#define POWER_LOOPCTRL_DC_R_OFFSET 4
-#define POWER_LOOPCTRL_DC_C_MASK 0x3
-#define POWER_LOOPCTRL_DC_C_OFFSET 0
-#define POWER_LOOPCTRL_DC_C_MAX 0x0
-#define POWER_LOOPCTRL_DC_C_2X 0x1
-#define POWER_LOOPCTRL_DC_C_4X 0x2
-#define POWER_LOOPCTRL_DC_C_MIN 0x3
-
-#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24)
-#define POWER_STS_PWRUP_SOURCE_OFFSET 24
-#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24)
-#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24)
-#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24)
-#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24)
-#define POWER_STS_PSWITCH_MASK (0x3 << 20)
-#define POWER_STS_PSWITCH_OFFSET 20
-#define POWER_STS_AVALID0_STATUS (1 << 17)
-#define POWER_STS_BVALID0_STATUS (1 << 16)
-#define POWER_STS_VBUSVALID0_STATUS (1 << 15)
-#define POWER_STS_SESSEND0_STATUS (1 << 14)
-#define POWER_STS_BATT_BO (1 << 13)
-#define POWER_STS_VDD5V_FAULT (1 << 12)
-#define POWER_STS_CHRGSTS (1 << 11)
-#define POWER_STS_DCDC_4P2_BO (1 << 10)
-#define POWER_STS_DC_OK (1 << 9)
-#define POWER_STS_VDDIO_BO (1 << 8)
-#define POWER_STS_VDDA_BO (1 << 7)
-#define POWER_STS_VDDD_BO (1 << 6)
-#define POWER_STS_VDD5V_GT_VDDIO (1 << 5)
-#define POWER_STS_VDD5V_DROOP (1 << 4)
-#define POWER_STS_AVALID0 (1 << 3)
-#define POWER_STS_BVALID0 (1 << 2)
-#define POWER_STS_VBUSVALID0 (1 << 1)
-#define POWER_STS_SESSEND0 (1 << 0)
-
-#define POWER_SPEED_STATUS_MASK (0xff << 16)
-#define POWER_SPEED_STATUS_OFFSET 16
-#define POWER_SPEED_CTRL_MASK 0x3
-#define POWER_SPEED_CTRL_OFFSET 0
-#define POWER_SPEED_CTRL_SS_OFF 0x0
-#define POWER_SPEED_CTRL_SS_ON 0x1
-#define POWER_SPEED_CTRL_SS_ENABLE 0x3
-
-#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16)
-#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16
-#define POWER_BATTMONITOR_EN_BATADJ (1 << 10)
-#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9)
-#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8)
-#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f
-#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0
-
-#define POWER_RESET_UNLOCK_MASK (0xffff << 16)
-#define POWER_RESET_UNLOCK_OFFSET 16
-#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16)
-#define POWER_RESET_PWD_OFF (1 << 1)
-#define POWER_RESET_PWD (1 << 0)
-
-#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3)
-#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2)
-#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1)
-#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0)
-
-#define POWER_SPECIAL_TEST_MASK 0xffffffff
-#define POWER_SPECIAL_TEST_OFFSET 0
-
-#define POWER_VERSION_MAJOR_MASK (0xff << 24)
-#define POWER_VERSION_MAJOR_OFFSET 24
-#define POWER_VERSION_MINOR_MASK (0xff << 16)
-#define POWER_VERSION_MINOR_OFFSET 16
-#define POWER_VERSION_STEP_MASK 0xffff
-#define POWER_VERSION_STEP_OFFSET 0
-
-#endif /* __MX23_REGS_POWER_H__ */
diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h
index eeb7e7f44c06..26e620f93802 100644
--- a/arch/arm/include/asm/arch-mxs/regs-ssp.h
+++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h
@@ -14,28 +14,7 @@
#include <asm/mach-imx/regs-common.h>
#ifndef __ASSEMBLY__
-#if defined(CONFIG_MX23)
-struct mxs_ssp_regs {
- mxs_reg_32(hw_ssp_ctrl0)
- mxs_reg_32(hw_ssp_cmd0)
- mxs_reg_32(hw_ssp_cmd1)
- mxs_reg_32(hw_ssp_compref)
- mxs_reg_32(hw_ssp_compmask)
- mxs_reg_32(hw_ssp_timing)
- mxs_reg_32(hw_ssp_ctrl1)
- mxs_reg_32(hw_ssp_data)
- mxs_reg_32(hw_ssp_sdresp0)
- mxs_reg_32(hw_ssp_sdresp1)
- mxs_reg_32(hw_ssp_sdresp2)
- mxs_reg_32(hw_ssp_sdresp3)
- mxs_reg_32(hw_ssp_status)
-
- uint32_t reserved1[12];
-
- mxs_reg_32(hw_ssp_debug)
- mxs_reg_32(hw_ssp_version)
-};
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
struct mxs_ssp_regs {
mxs_reg_32(hw_ssp_ctrl0)
mxs_reg_32(hw_ssp_cmd0)
@@ -62,9 +41,7 @@ struct mxs_ssp_regs {
static inline int mxs_ssp_bus_id_valid(int bus)
{
-#if defined(CONFIG_MX23)
- const unsigned int mxs_ssp_chan_count = 2;
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
const unsigned int mxs_ssp_chan_count = 4;
#endif
@@ -79,9 +56,7 @@ static inline int mxs_ssp_bus_id_valid(int bus)
static inline int mxs_ssp_clock_by_bus(unsigned int clock)
{
-#if defined(CONFIG_MX23)
- return 0;
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
return clock;
#endif
}
@@ -125,11 +100,6 @@ static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
#define SSP_CTRL0_GET_RESP (1 << 17)
#define SSP_CTRL0_ENABLE (1 << 16)
-#ifdef CONFIG_MX23
-#define SSP_CTRL0_XFER_COUNT_OFFSET 0
-#define SSP_CTRL0_XFER_COUNT_MASK 0xffff
-#endif
-
#define SSP_CMD0_SOFT_TERMINATE (1 << 26)
#define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
#define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24)
@@ -137,12 +107,6 @@ static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
#define SSP_CMD0_SLOW_CLKING_EN (1 << 22)
#define SSP_CMD0_CONT_CLKING_EN (1 << 21)
#define SSP_CMD0_APPEND_8CYC (1 << 20)
-#if defined(CONFIG_MX23)
-#define SSP_CMD0_BLOCK_SIZE_MASK (0xf << 16)
-#define SSP_CMD0_BLOCK_SIZE_OFFSET 16
-#define SSP_CMD0_BLOCK_COUNT_MASK (0xff << 8)
-#define SSP_CMD0_BLOCK_COUNT_OFFSET 8
-#endif
#define SSP_CMD0_CMD_MASK 0xff
#define SSP_CMD0_CMD_OFFSET 0
#define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00
diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h
index 9e19aabf114a..83ac268f70c0 100644
--- a/arch/arm/include/asm/arch-mxs/regs-timrot.h
+++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h
@@ -17,16 +17,7 @@
struct mxs_timrot_regs {
mxs_reg_32(hw_timrot_rotctrl)
mxs_reg_32(hw_timrot_rotcount)
-#if defined(CONFIG_MX23)
- mxs_reg_32(hw_timrot_timctrl0)
- mxs_reg_32(hw_timrot_timcount0)
- mxs_reg_32(hw_timrot_timctrl1)
- mxs_reg_32(hw_timrot_timcount1)
- mxs_reg_32(hw_timrot_timctrl2)
- mxs_reg_32(hw_timrot_timcount2)
- mxs_reg_32(hw_timrot_timctrl3)
- mxs_reg_32(hw_timrot_timcount3)
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
mxs_reg_32(hw_timrot_timctrl0)
mxs_reg_32(hw_timrot_running_count0)
mxs_reg_32(hw_timrot_fixed_count0)
@@ -68,9 +59,7 @@ struct mxs_timrot_regs {
#define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10)
#define TIMROT_ROTCTRL_POLARITY_B (1 << 9)
#define TIMROT_ROTCTRL_POLARITY_A (1 << 8)
-#if defined(CONFIG_MX23)
-#define TIMROT_ROTCTRL_SELECT_B_MASK (0x7 << 4)
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4)
#endif
#define TIMROT_ROTCTRL_SELECT_B_OFFSET 4
@@ -80,19 +69,14 @@ struct mxs_timrot_regs {
#define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4)
-#if defined(CONFIG_MX23)
-#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x6 << 4)
-#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0x7 << 4)
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4)
#define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4)
#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4)
#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4)
#endif
-#if defined(CONFIG_MX23)
-#define TIMROT_ROTCTRL_SELECT_A_MASK 0x7
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_A_MASK 0xf
#endif
#define TIMROT_ROTCTRL_SELECT_A_OFFSET 0
@@ -102,10 +86,7 @@ struct mxs_timrot_regs {
#define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3
#define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4
#define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5
-#if defined(CONFIG_MX23)
-#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x6
-#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0x7
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6
#define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7
#define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8
@@ -138,15 +119,7 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRLn_SELECT_PWM2 0x3
#define TIMROT_TIMCTRLn_SELECT_PWM3 0x4
#define TIMROT_TIMCTRLn_SELECT_PWM4 0x5
-#if defined(CONFIG_MX23)
-#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x6
-#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0x7
-#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0x8
-#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0x9
-#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xa
-#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xb
-#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xc
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_TIMCTRLn_SELECT_PWM5 0x6
#define TIMROT_TIMCTRLn_SELECT_PWM6 0x7
#define TIMROT_TIMCTRLn_SELECT_PWM7 0x8
@@ -159,18 +132,12 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf
#endif
-#if defined(CONFIG_MX23)
-#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK (0xffff << 16)
-#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 16
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff
#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0
#endif
-#if defined(CONFIG_MX23)
-#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffff
-#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff
#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
#endif
@@ -188,15 +155,7 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16)
-#if defined(CONFIG_MX23)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x6 << 16)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0x7 << 16)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0x8 << 16)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0x9 << 16)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xa << 16)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xb << 16)
-#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xc << 16)
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16)
@@ -208,45 +167,7 @@ struct mxs_timrot_regs {
#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16)
#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16)
#endif
-#if defined(CONFIG_MX23)
-#define TIMROT_TIMCTRL3_IRQ (1 << 15)
-#define TIMROT_TIMCTRL3_IRQ_EN (1 << 14)
-#define TIMROT_TIMCTRL3_DUTU_VALID (1 << 10)
-#endif
#define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9)
-#if defined(CONFIG_MX23)
-#define TIMROT_TIMCTRL3_POLARITY_MASK (0x1 << 8)
-#define TIMROT_TIMCTRL3_POLARITY_OFFSET 8
-#define TIMROT_TIMCTRL3_POLARITY_POSITIVE (0x0 << 8)
-#define TIMROT_TIMCTRL3_POLARITY_NEGATIVE (0x1 << 8)
-#define TIMROT_TIMCTRL3_UPDATE (1 << 7)
-#define TIMROT_TIMCTRL3_RELOAD (1 << 6)
-#define TIMROT_TIMCTRL3_PRESCALE_MASK (0x3 << 4)
-#define TIMROT_TIMCTRL3_PRESCALE_OFFSET 4
-#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1 (0x0 << 4)
-#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2 (0x1 << 4)
-#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4 (0x2 << 4)
-#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8 (0x3 << 4)
-#define TIMROT_TIMCTRL3_SELECT_MASK 0xf
-#define TIMROT_TIMCTRL3_SELECT_OFFSET 0
-#define TIMROT_TIMCTRL3_SELECT_NEVER_TICK 0x0
-#define TIMROT_TIMCTRL3_SELECT_PWM0 0x1
-#define TIMROT_TIMCTRL3_SELECT_PWM1 0x2
-#define TIMROT_TIMCTRL3_SELECT_PWM2 0x3
-#define TIMROT_TIMCTRL3_SELECT_PWM3 0x4
-#define TIMROT_TIMCTRL3_SELECT_PWM4 0x5
-#define TIMROT_TIMCTRL3_SELECT_ROTARYA 0x6
-#define TIMROT_TIMCTRL3_SELECT_ROTARYB 0x7
-#define TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL 0x8
-#define TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL 0x9
-#define TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL 0xa
-#define TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL 0xb
-#define TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS 0xc
-#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK (0xffff << 16)
-#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET 16
-#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK 0xffff
-#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET 0
-#endif
#define TIMROT_VERSION_MAJOR_MASK (0xff << 24)
#define TIMROT_VERSION_MAJOR_OFFSET 24
diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h
index 20ee863ac7e7..5d86d6b28312 100644
--- a/arch/arm/include/asm/arch-mxs/sys_proto.h
+++ b/arch/arm/include/asm/arch-mxs/sys_proto.h
@@ -16,9 +16,7 @@ int mxsmmc_initialize(struct bd_info *bis, int id, int (*wp)(int),
#ifdef CONFIG_SPL_BUILD
-#if defined(CONFIG_MX23)
-#include <asm/arch/iomux-mx23.h>
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#include <asm/arch/iomux-mx28.h>
#endif
@@ -36,18 +34,7 @@ struct mxs_pair {
};
static const struct mxs_pair mxs_boot_modes[] = {
-#if defined(CONFIG_MX23)
- { 0x00, 0x0f, "USB" },
- { 0x01, 0x1f, "I2C, master" },
- { 0x02, 0x1f, "SSP SPI #1, master, NOR" },
- { 0x03, 0x1f, "SSP SPI #2, master, NOR" },
- { 0x04, 0x1f, "NAND" },
- { 0x06, 0x1f, "JTAG" },
- { 0x08, 0x1f, "SSP SPI #3, master, EEPROM" },
- { 0x09, 0x1f, "SSP SD/MMC #0" },
- { 0x0a, 0x1f, "SSP SD/MMC #1" },
- { 0x00, 0x00, "Reserved/Unknown/Wrong" },
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
{ 0x00, 0x0f, "USB #0" },
{ 0x01, 0x1f, "I2C #0, master, 3V3" },
{ 0x11, 0x1f, "I2C #0, master, 1V8" },
diff --git a/arch/arm/include/asm/mach-imx/dma.h b/arch/arm/include/asm/mach-imx/dma.h
index 55eb84cb8e7e..30a0fc057f2a 100644
--- a/arch/arm/include/asm/mach-imx/dma.h
+++ b/arch/arm/include/asm/mach-imx/dma.h
@@ -23,19 +23,7 @@
/*
* MXS DMA channels
*/
-#if defined(CONFIG_MX23)
-enum {
- MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0,
- MXS_DMA_CHANNEL_AHB_APBH_SSP0,
- MXS_DMA_CHANNEL_AHB_APBH_SSP1,
- MXS_DMA_CHANNEL_AHB_APBH_RESERVED0,
- MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
- MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
- MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
- MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
- MXS_MAX_DMA_CHANNELS,
-};
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
enum {
MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
MXS_DMA_CHANNEL_AHB_APBH_SSP1,
diff --git a/arch/arm/include/asm/mach-imx/regs-apbh.h b/arch/arm/include/asm/mach-imx/regs-apbh.h
index 94c330c7f928..c751eab99164 100644
--- a/arch/arm/include/asm/mach-imx/regs-apbh.h
+++ b/arch/arm/include/asm/mach-imx/regs-apbh.h
@@ -17,86 +17,6 @@
#ifndef __ASSEMBLY__
-#if defined(CONFIG_MX23)
-struct mxs_apbh_regs {
- mxs_reg_32(hw_apbh_ctrl0)
- mxs_reg_32(hw_apbh_ctrl1)
- mxs_reg_32(hw_apbh_ctrl2)
- mxs_reg_32(hw_apbh_channel_ctrl)
-
- union {
- struct {
- mxs_reg_32(hw_apbh_ch_curcmdar)
- mxs_reg_32(hw_apbh_ch_nxtcmdar)
- mxs_reg_32(hw_apbh_ch_cmd)
- mxs_reg_32(hw_apbh_ch_bar)
- mxs_reg_32(hw_apbh_ch_sema)
- mxs_reg_32(hw_apbh_ch_debug1)
- mxs_reg_32(hw_apbh_ch_debug2)
- } ch[8];
- struct {
- mxs_reg_32(hw_apbh_ch0_curcmdar)
- mxs_reg_32(hw_apbh_ch0_nxtcmdar)
- mxs_reg_32(hw_apbh_ch0_cmd)
- mxs_reg_32(hw_apbh_ch0_bar)
- mxs_reg_32(hw_apbh_ch0_sema)
- mxs_reg_32(hw_apbh_ch0_debug1)
- mxs_reg_32(hw_apbh_ch0_debug2)
- mxs_reg_32(hw_apbh_ch1_curcmdar)
- mxs_reg_32(hw_apbh_ch1_nxtcmdar)
- mxs_reg_32(hw_apbh_ch1_cmd)
- mxs_reg_32(hw_apbh_ch1_bar)
- mxs_reg_32(hw_apbh_ch1_sema)
- mxs_reg_32(hw_apbh_ch1_debug1)
- mxs_reg_32(hw_apbh_ch1_debug2)
- mxs_reg_32(hw_apbh_ch2_curcmdar)
- mxs_reg_32(hw_apbh_ch2_nxtcmdar)
- mxs_reg_32(hw_apbh_ch2_cmd)
- mxs_reg_32(hw_apbh_ch2_bar)
- mxs_reg_32(hw_apbh_ch2_sema)
- mxs_reg_32(hw_apbh_ch2_debug1)
- mxs_reg_32(hw_apbh_ch2_debug2)
- mxs_reg_32(hw_apbh_ch3_curcmdar)
- mxs_reg_32(hw_apbh_ch3_nxtcmdar)
- mxs_reg_32(hw_apbh_ch3_cmd)
- mxs_reg_32(hw_apbh_ch3_bar)
- mxs_reg_32(hw_apbh_ch3_sema)
- mxs_reg_32(hw_apbh_ch3_debug1)
- mxs_reg_32(hw_apbh_ch3_debug2)
- mxs_reg_32(hw_apbh_ch4_curcmdar)
- mxs_reg_32(hw_apbh_ch4_nxtcmdar)
- mxs_reg_32(hw_apbh_ch4_cmd)
- mxs_reg_32(hw_apbh_ch4_bar)
- mxs_reg_32(hw_apbh_ch4_sema)
- mxs_reg_32(hw_apbh_ch4_debug1)
- mxs_reg_32(hw_apbh_ch4_debug2)
- mxs_reg_32(hw_apbh_ch5_curcmdar)
- mxs_reg_32(hw_apbh_ch5_nxtcmdar)
- mxs_reg_32(hw_apbh_ch5_cmd)
- mxs_reg_32(hw_apbh_ch5_bar)
- mxs_reg_32(hw_apbh_ch5_sema)
- mxs_reg_32(hw_apbh_ch5_debug1)
- mxs_reg_32(hw_apbh_ch5_debug2)
- mxs_reg_32(hw_apbh_ch6_curcmdar)
- mxs_reg_32(hw_apbh_ch6_nxtcmdar)
- mxs_reg_32(hw_apbh_ch6_cmd)
- mxs_reg_32(hw_apbh_ch6_bar)
- mxs_reg_32(hw_apbh_ch6_sema)
- mxs_reg_32(hw_apbh_ch6_debug1)
- mxs_reg_32(hw_apbh_ch6_debug2)
- mxs_reg_32(hw_apbh_ch7_curcmdar)
- mxs_reg_32(hw_apbh_ch7_nxtcmdar)
- mxs_reg_32(hw_apbh_ch7_cmd)
- mxs_reg_32(hw_apbh_ch7_bar)
- mxs_reg_32(hw_apbh_ch7_sema)
- mxs_reg_32(hw_apbh_ch7_debug1)
- mxs_reg_32(hw_apbh_ch7_debug2)
- };
- };
- mxs_reg_32(hw_apbh_version)
-};
-
-#else
struct mxs_apbh_regs {
mxs_reg_32(hw_apbh_ctrl0)
mxs_reg_32(hw_apbh_ctrl1)
@@ -235,7 +155,6 @@ struct mxs_apbh_regs {
};
mxs_reg_32(hw_apbh_version)
};
-#endif
#endif
@@ -243,20 +162,7 @@ struct mxs_apbh_regs {
#define APBH_CTRL0_CLKGATE (1 << 30)
#define APBH_CTRL0_AHB_BURST8_EN (1 << 29)
#define APBH_CTRL0_APB_BURST_EN (1 << 28)
-#if defined(CONFIG_MX23)
-#define APBH_CTRL0_RSVD0_MASK (0xf << 24)
-#define APBH_CTRL0_RSVD0_OFFSET 24
-#define APBH_CTRL0_RESET_CHANNEL_MASK (0xff << 16)
-#define APBH_CTRL0_RESET_CHANNEL_OFFSET 16
-#define APBH_CTRL0_CLKGATE_CHANNEL_MASK (0xff << 8)
-#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 8
-#define APBH_CTRL0_CLKGATE_CHANNEL_SSP0 0x02
-#define APBH_CTRL0_CLKGATE_CHANNEL_SSP1 0x04
-#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x10
-#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x20
-#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x40
-#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x80
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define APBH_CTRL0_RSVD0_MASK (0xfff << 16)
#define APBH_CTRL0_RSVD0_OFFSET 16
#define APBH_CTRL0_CLKGATE_CHANNEL_MASK 0xffff
@@ -393,24 +299,7 @@ struct mxs_apbh_regs {
/* Not on i.MX23 */
#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16
-#if defined(CONFIG_MX23)
-#define APBH_DEVSEL_CH7_MASK (0xf << 28)
-#define APBH_DEVSEL_CH7_OFFSET 28
-#define APBH_DEVSEL_CH6_MASK (0xf << 24)
-#define APBH_DEVSEL_CH6_OFFSET 24
-#define APBH_DEVSEL_CH5_MASK (0xf << 20)
-#define APBH_DEVSEL_CH5_OFFSET 20
-#define APBH_DEVSEL_CH4_MASK (0xf << 16)
-#define APBH_DEVSEL_CH4_OFFSET 16
-#define APBH_DEVSEL_CH3_MASK (0xf << 12)
-#define APBH_DEVSEL_CH3_OFFSET 12
-#define APBH_DEVSEL_CH2_MASK (0xf << 8)
-#define APBH_DEVSEL_CH2_OFFSET 8
-#define APBH_DEVSEL_CH1_MASK (0xf << 4)
-#define APBH_DEVSEL_CH1_OFFSET 4
-#define APBH_DEVSEL_CH0_MASK (0xf << 0)
-#define APBH_DEVSEL_CH0_OFFSET 0
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define APBH_DEVSEL_CH15_MASK (0x3 << 30)
#define APBH_DEVSEL_CH15_OFFSET 30
#define APBH_DEVSEL_CH14_MASK (0x3 << 28)
diff --git a/arch/arm/include/asm/mach-imx/regs-lcdif.h b/arch/arm/include/asm/mach-imx/regs-lcdif.h
index 587463879661..12e0faad91d6 100644
--- a/arch/arm/include/asm/mach-imx/regs-lcdif.h
+++ b/arch/arm/include/asm/mach-imx/regs-lcdif.h
@@ -29,10 +29,6 @@ struct mxs_lcdif_regs {
mxs_reg_32(hw_lcdif_cur_buf) /* 0x30/0x40 */
mxs_reg_32(hw_lcdif_next_buf) /* 0x40/0x50 */
-#if defined(CONFIG_MX23)
- uint32_t reserved1[4];
-#endif
-
mxs_reg_32(hw_lcdif_timing) /* 0x60 */
mxs_reg_32(hw_lcdif_vdctrl0) /* 0x70 */
mxs_reg_32(hw_lcdif_vdctrl1) /* 0x80 */
@@ -52,9 +48,6 @@ struct mxs_lcdif_regs {
mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */
mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */
-#if defined(CONFIG_MX23)
- uint32_t reserved2[12];
-#endif
mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */
mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */
#if defined(CONFIG_MX28) || defined(CONFIG_MX6SX) || \
@@ -214,13 +207,8 @@ struct mxs_lcdif_regs {
#define LCDIF_VDCTRL1_VSYNC_PERIOD_MASK 0xffffffff
#define LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET 0
-#if defined(CONFIG_MX23)
-#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0xff << 24)
-#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 24
-#else
#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0x3fff << 18)
#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 18
-#endif
#define LCDIF_VDCTRL2_HSYNC_PERIOD_MASK 0x3ffff
#define LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET 0
diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig
index bd075de2b826..e04b0dc10f6c 100644
--- a/arch/arm/mach-imx/mxs/Kconfig
+++ b/arch/arm/mach-imx/mxs/Kconfig
@@ -1,24 +1,3 @@
-if ARCH_MX23
-
-config MX23
- bool
- default y
-
-choice
- prompt "MX23 board select"
- optional
-
-config TARGET_SANSA_FUZE_PLUS
- bool "Support sansa_fuze_plus"
-
-endchoice
-
-config SYS_SOC
- default "mxs"
-
-
-endif
-
if ARCH_MX28
config MX28
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index da988f6bb667..e05415d2d502 100644
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -215,10 +215,7 @@ static int mxs_dma_reset(int channel)
struct mxs_apbh_regs *apbh_regs =
(struct mxs_apbh_regs *)MXS_APBH_BASE;
int ret;
-#if defined(CONFIG_MX23)
- uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set);
- uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET;
-#elif defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || \
+#if defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || \
defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
u32 setreg = (uintptr_t)(&apbh_regs->hw_apbh_channel_ctrl_set);
u32 offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET;
diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c
index 4b2b18fdb538..22e50dd21ca9 100644
--- a/drivers/gpio/mxs_gpio.c
+++ b/drivers/gpio/mxs_gpio.c
@@ -15,15 +15,7 @@
#include <asm/arch/iomux.h>
#include <asm/arch/imx-regs.h>
-#if defined(CONFIG_MX23)
-#define PINCTRL_BANKS 3
-#define PINCTRL_DOUT(n) (0x0500 + ((n) * 0x10))
-#define PINCTRL_DIN(n) (0x0600 + ((n) * 0x10))
-#define PINCTRL_DOE(n) (0x0700 + ((n) * 0x10))
-#define PINCTRL_PIN2IRQ(n) (0x0800 + ((n) * 0x10))
-#define PINCTRL_IRQEN(n) (0x0900 + ((n) * 0x10))
-#define PINCTRL_IRQSTAT(n) (0x0c00 + ((n) * 0x10))
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define PINCTRL_BANKS 5
#define PINCTRL_DOUT(n) (0x0700 + ((n) * 0x10))
#define PINCTRL_DIN(n) (0x0900 + ((n) * 0x10))
@@ -32,7 +24,7 @@
#define PINCTRL_IRQEN(n) (0x1100 + ((n) * 0x10))
#define PINCTRL_IRQSTAT(n) (0x1400 + ((n) * 0x10))
#else
-#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#error "Please select CONFIG_MX28"
#endif
#define GPIO_INT_FALL_EDGE 0x0
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index 8fd41764152f..863e67f10c52 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -391,15 +391,7 @@ mxsmmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, struct mmc_data *data)
ctrl0 |= SSP_CTRL0_DATA_XFER;
reg = data->blocksize * data->blocks;
-#if defined(CONFIG_MX23)
- ctrl0 |= reg & SSP_CTRL0_XFER_COUNT_MASK;
-
- clrsetbits_le32(&ssp_regs->hw_ssp_cmd0,
- SSP_CMD0_BLOCK_SIZE_MASK | SSP_CMD0_BLOCK_COUNT_MASK,
- ((data->blocks - 1) << SSP_CMD0_BLOCK_COUNT_OFFSET) |
- ((ffs(data->blocksize) - 1) <<
- SSP_CMD0_BLOCK_SIZE_OFFSET));
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
writel(reg, &ssp_regs->hw_ssp_xfer_size);
reg = ((data->blocks - 1) <<
@@ -595,8 +587,6 @@ static int mxsmmc_probe(struct udevice *dev)
#ifdef CONFIG_MX28
priv->clkid = clkid - MXS_SSP_IMX28_CLKID_SSP0;
-#else /* CONFIG_MX23 */
- priv->clkid = clkid - MXS_SSP_IMX23_CLKID_SSP0;
#endif
mmc = &plat->mmc;
mmc->cfg = &plat->cfg;
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
index d41352a0bb8c..45b541fe1668 100644
--- a/drivers/spi/mxs_spi.c
+++ b/drivers/spi/mxs_spi.c
@@ -83,10 +83,7 @@ static int mxs_spi_xfer_pio(struct mxs_spi_priv *priv,
while (length--) {
/* We transfer 1 byte */
-#if defined(CONFIG_MX23)
- writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr);
- writel(1, &ssp_regs->hw_ssp_ctrl0_set);
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
writel(1, &ssp_regs->hw_ssp_xfer_size);
#endif
@@ -146,9 +143,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_priv *priv,
int tl;
int ret = 0;
-#if defined(CONFIG_MX23)
- const int mxs_spi_pio_words = 1;
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
const int mxs_spi_pio_words = 4;
#endif
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index 325c3ee00ce3..3db3e18066e7 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -23,17 +23,9 @@
* Includes
*/
-#if defined(CONFIG_MX23) && defined(CONFIG_MX28)
-#error Select either CONFIG_MX23 or CONFIG_MX28 , never both!
-#elif !defined(CONFIG_MX23) && !defined(CONFIG_MX28)
-#error Select one of CONFIG_MX23 or CONFIG_MX28 !
-#endif
-
#include <asm/arch/regs-base.h>
-#if defined(CONFIG_MX23)
-#include <asm/arch/iomux-mx23.h>
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#include <asm/arch/iomux-mx28.h>
#endif
@@ -54,9 +46,7 @@
/* OCRAM at 0x0 ; 32kB on MX23 ; 128kB on MX28 */
#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
-#if defined(CONFIG_MX23)
-#define CONFIG_SYS_INIT_RAM_SIZE (32 * 1024)
-#elif defined(CONFIG_MX28)
+#if defined(CONFIG_MX28)
#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
#endif
diff --git a/tools/Makefile b/tools/Makefile
index 2d550432ba5a..ce8faeb85249 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -127,7 +127,7 @@ fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o
fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
file2include-objs := file2include.o
-ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),)
+ifneq ($(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),)
# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
@@ -155,7 +155,7 @@ HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE
endif
# MXSImage needs LibSSL
-ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),)
+ifneq ($(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE)$(CONFIG_FIT_CIPHER),)
HOSTCFLAGS_kwbimage.o += \
$(shell pkg-config --cflags libssl libcrypto 2> /dev/null || echo "")
HOSTLDLIBS_mkimage += \
@@ -186,7 +186,6 @@ hostprogs-$(CONFIG_X86) += ifdtool
ifwitool-objs := ifwitool.o
hostprogs-$(CONFIG_X86)$(CONFIG_SANDBOX) += ifwitool
-hostprogs-$(CONFIG_MX23) += mxsboot
hostprogs-$(CONFIG_MX28) += mxsboot
HOSTCFLAGS_mxsboot.o := -pedantic
--
2.17.1
More information about the U-Boot
mailing list