[PATCH 1/4] net: phy: fixed: be compatible with live OF tree
Vladimir Oltean
olteanv at gmail.com
Tue Feb 16 23:48:01 CET 2021
From: Vladimir Oltean <vladimir.oltean at nxp.com>
On systems that use CONFIG_OF_LIVE, the "ofnode" type is defined as
const struct device_node *np, while on the flat DT systems it is defined
as a long of_offset into gd->fdt_blob.
It is desirable that the fixed PHY driver uses the higher-level ofnode
abstraction instead of parsing gd->fdt_blob directly, because that
enables it to work on live OF systems.
The fixed PHY driver has used a nastyyyyy hack since its introduction in
commit db40c1aa1c10 ("drivers/net/phy: add fixed-phy / fixed-link support"),
which is to pass the long gd->fdt_blob offset inside int phydev->addr
(a value that normally holds the MDIO bus address at which the PHY
responds). Even ignoring the fact that the types were already mismatched
leading to a potential truncation (flat OF offset was supposed to be a
long and not an int), we really cannot extend this hack any longer,
because there's no way an int will hold the other representation of
ofnode, the struct device_node *np.
So we unfortunately need to do the right thing, which is to use the
framework introduced by Grygorii Strashko in commit eef0b8a930d1 ("net:
phy: add ofnode node to struct phy_device"). This will populate
phydev->node for the fixed PHY.
Note that phydev->node will not be valid in the probe function, since
that is called synchronously from phy_device_create and we really have
no way of passing the ofnode directly through the phy_device_create API.
So we do what other drivers do too: we move the OF parsing logic from
the .probe to the .config method of the PHY driver. The new function
will be called at phy_config() time.
I do believe I've converted all the possible call paths for creating a
PHY with PHY_FIXED_ID, so there is really no reason to maintain
compatibility with the old logic of retrieving a flat OF tree offset
from phydev->addr. We just pass 0 to phydev->addr now.
Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
---
drivers/net/phy/fixed.c | 30 ++++++++++++++++++++++--------
drivers/net/phy/phy.c | 30 +++++++++++++++---------------
2 files changed, 37 insertions(+), 23 deletions(-)
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
index 1a38c29469a4..d67c22a7b8c7 100644
--- a/drivers/net/phy/fixed.c
+++ b/drivers/net/phy/fixed.c
@@ -15,15 +15,17 @@
DECLARE_GLOBAL_DATA_PTR;
-int fixedphy_probe(struct phy_device *phydev)
+static int fixedphy_of_init(struct phy_device *phydev)
{
+ ofnode node = phy_get_ofnode(phydev);
struct fixed_link *priv;
- int ofnode = phydev->addr;
u32 val;
+ if (!ofnode_valid(node))
+ return -EINVAL;
+
/* check for mandatory properties within fixed-link node */
- val = fdt_getprop_u32_default_node(gd->fdt_blob,
- ofnode, 0, "speed", 0);
+ val = ofnode_read_u32_default(node, "speed", 0);
if (val != SPEED_10 && val != SPEED_100 && val != SPEED_1000 &&
val != SPEED_2500 && val != SPEED_10000) {
printf("ERROR: no/invalid speed given in fixed-link node!");
@@ -33,14 +35,26 @@ int fixedphy_probe(struct phy_device *phydev)
priv = malloc(sizeof(*priv));
if (!priv)
return -ENOMEM;
+
memset(priv, 0, sizeof(*priv));
phydev->priv = priv;
priv->link_speed = val;
- priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex");
- priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause");
- priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause");
+ priv->duplex = ofnode_read_bool(node, "full-duplex");
+ priv->pause = ofnode_read_bool(node, "pause");
+ priv->asym_pause = ofnode_read_bool(node, "asym-pause");
+
+ return 0;
+}
+
+static int fixedphy_config(struct phy_device *phydev)
+{
+ int err;
+
+ err = fixedphy_of_init(phydev);
+ if (err)
+ return err;
/* fixed-link phy must not be reset by core phy code */
phydev->flags |= PHY_FLAG_BROKEN_RESET;
@@ -71,7 +85,7 @@ static struct phy_driver fixedphy_driver = {
.mask = 0xffffffff,
.name = "Fixed PHY",
.features = PHY_GBIT_FEATURES | SUPPORTED_MII,
- .probe = fixedphy_probe,
+ .config = fixedphy_config,
.startup = fixedphy_startup,
.shutdown = fixedphy_shutdown,
};
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 89e3076bfd25..2feb559bba97 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -988,6 +988,7 @@ static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
struct phy_device *fixed_phy_create(ofnode node)
{
phy_interface_t interface = PHY_INTERFACE_MODE_NONE;
+ struct phy_device *phydev;
const char *if_str;
ofnode subnode;
@@ -1004,8 +1005,11 @@ struct phy_device *fixed_phy_create(ofnode node)
return NULL;
}
- return phy_device_create(NULL, ofnode_to_offset(subnode), PHY_FIXED_ID,
- false, interface);
+ phydev = phy_device_create(NULL, 0, PHY_FIXED_ID, false, interface);
+ if (phydev)
+ phydev->node = subnode;
+
+ return phydev;
}
#ifdef CONFIG_DM_ETH
@@ -1018,20 +1022,16 @@ static struct phy_device *phy_connect_fixed(struct mii_dev *bus,
phy_interface_t interface)
#endif
{
- struct phy_device *phydev = NULL;
- int sn;
- const char *name;
+ ofnode node = dev_ofnode(dev), subnode;
+ struct phy_device *phydev;
- sn = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev));
- while (sn > 0) {
- name = fdt_get_name(gd->fdt_blob, sn, NULL);
- if (name && strcmp(name, "fixed-link") == 0) {
- phydev = phy_device_create(bus, sn, PHY_FIXED_ID, false,
- interface);
- break;
- }
- sn = fdt_next_subnode(gd->fdt_blob, sn);
- }
+ subnode = ofnode_find_subnode(node, "fixed-link");
+ if (!ofnode_valid(subnode))
+ return NULL;
+
+ phydev = phy_device_create(bus, 0, PHY_FIXED_ID, false, interface);
+ if (phydev)
+ phydev->node = subnode;
return phydev;
}
--
2.25.1
More information about the U-Boot
mailing list