[PATCH] rng: iProc rng200: Rename ..._platdata variables to just ..._plat

[Peter Robinson]

On Thu, Feb 18, 2021 at 8:36 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
>
> On 18.02.21 21:06, Peter Robinson wrote:
> > In 8a8d24bd Simon dropped data from all the various _platdata calls
> > but it seems this wasn't caught for the RNG200 driver from when it
> > was posted to merged. This fixes that issue.
> >
> > Fixes: 537f0018 (rng: Add iProc RNG200 driver)
> > Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
> > ---
> >  drivers/rng/iproc_rng200.c | 20 ++++++++++----------
> >  1 file changed, 10 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/rng/iproc_rng200.c b/drivers/rng/iproc_rng200.c
> > index f71f285f53..1126bbd797 100644
> > --- a/drivers/rng/iproc_rng200.c
> > +++ b/drivers/rng/iproc_rng200.c
> > @@ -33,11 +33,11 @@
> >  #define RNG_FIFO_COUNT_OFFSET                                0x24
> >  #define RNG_FIFO_COUNT_RNG_FIFO_COUNT_MASK           0x000000FF
> >
> > -struct iproc_rng200_platdata {
> > +struct iproc_rng200_plat {
>
> The renaming of the structure seems to be unrelated to the commit message.
>
> You are moving from allocating via plat_auto to priv_auto. So a
> reasonable name for the structure would be iproc_rng200_priv.
>
> >       fdt_addr_t base;
> >  };
> >
> > -static void iproc_rng200_enable(struct iproc_rng200_platdata *pdata, bool enable)
> > +static void iproc_rng200_enable(struct iproc_rng200_plat *pdata, bool enable)
> >  {
> >       fdt_addr_t rng_base = pdata->base;
> >       u32 val;
> > @@ -52,7 +52,7 @@ static void iproc_rng200_enable(struct iproc_rng200_platdata *pdata, bool enable
> >       writel(val, rng_base + RNG_CTRL_OFFSET);
> >  }
> >
> > -static void iproc_rng200_restart(struct iproc_rng200_platdata *pdata)
> > +static void iproc_rng200_restart(struct iproc_rng200_plat *pdata)
> >  {
> >       fdt_addr_t rng_base = pdata->base;
> >       u32 val;
> > @@ -84,7 +84,7 @@ static void iproc_rng200_restart(struct iproc_rng200_platdata *pdata)
> >
> >  static int iproc_rng200_read(struct udevice *dev, void *data, size_t len)
> >  {
> > -     struct iproc_rng200_platdata *priv = dev_get_plat(dev);
> > +     struct iproc_rng200_plat *priv = dev_get_plat(dev);
>
> At the end of the patch you move from plat_auto to priv_auto. So
> shouldn't you call dev_get_priv(dev)?
>
> >       char *buf = (char *)data;
> >       u32 num_remaining = len;
> >       u32 status;
> > @@ -136,7 +136,7 @@ static int iproc_rng200_read(struct udevice *dev, void *data, size_t len)
> >
> >  static int iproc_rng200_probe(struct udevice *dev)
> >  {
> > -     struct iproc_rng200_platdata *priv = dev_get_plat(dev);
> > +     struct iproc_rng200_plat *priv = dev_get_plat(dev);
> >
> >       iproc_rng200_enable(priv, true);
> >
> > @@ -145,16 +145,16 @@ static int iproc_rng200_probe(struct udevice *dev)
> >
> >  static int iproc_rng200_remove(struct udevice *dev)
> >  {
> > -     struct iproc_rng200_platdata *priv = dev_get_plat(dev);
> > +     struct iproc_rng200_plat *priv = dev_get_plat(dev);
> >
> >       iproc_rng200_enable(priv, false);
> >
> >       return 0;
> >  }
> >
> > -static int iproc_rng200_ofdata_to_platdata(struct udevice *dev)
> > +static int iproc_rng200_of_to_plat(struct udevice *dev)
> >  {
> > -     struct iproc_rng200_platdata *pdata = dev_get_plat(dev);
> > +     struct iproc_rng200_plat *pdata = dev_get_plat(dev);
> >
> >       pdata->base = dev_read_addr(dev);
> >       if (!pdata->base)
> > @@ -180,6 +180,6 @@ U_BOOT_DRIVER(iproc_rng200_rng) = {
> >       .ops = &iproc_rng200_ops,
> >       .probe = iproc_rng200_probe,
> >       .remove = iproc_rng200_remove,
> > -     .plat_auto = sizeof(struct iproc_rng200_platdata),
> > -     .of_to_plat = iproc_rng200_ofdata_to_platdata,
> > +     .priv_auto = sizeof(struct iproc_rng200_plat),
> > +     .of_to_plat = iproc_rng200_of_to_plat,
>
> Why do you set of_to_plat if you are using priv_auto data?
> I would have expected the probe function to fill the auto allocated
> private data.

I based the change on Simon's changes