[PATCH 1/2] ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX

[Marek Vasut]

On 1/2/21 5:44 PM, Marek Vasut wrote:
> The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
> Due to a change in gpiolib-of.c, setting flags to GPIO_ACTIVE_LOW and
> using output-low DT property leads to the GPIO being set high instead.

+CC Tom

These two should be applied to 2021.01 as well, can you pick them ?
Thanks