[PATCH 2/2] ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02

[Patrick DELAUNAY]

On 1/2/21 5:44 PM, Marek Vasut wrote:
> The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0.
> Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the
> correctness of the DT.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrice Chotard <patrice.chotard at st.com>
> Cc: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>   arch/arm/dts/stm32mp15xx-dhcom-drc02.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> index e8508aa4d5a..4948ccd4014 100644
> --- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts
> @@ -37,7 +37,7 @@
>   	 */
>   	usb-hub {
>   		gpio-hog;
> -		gpios = <8 GPIO_ACTIVE_HIGH>;
> +		gpios = <8 0>;
>   		output-high;
>   		line-name = "rs485-rx-en";
>   	};
> @@ -65,7 +65,7 @@
>   	 */
>   	usb-hub {
>   		gpio-hog;
> -		gpios = <2 GPIO_ACTIVE_HIGH>;
> +		gpios = <2 0>;
>   		output-high;
>   		line-name = "usb-hub-reset";
>   	};

Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>

Thanks

Patrick