[meta-freescale] MTD UBI undefined reference failed to build OE gatesgarth branch
andrey.z at gmail.com
Fri Jan 15 21:12:45 CET 2021
On Fri, Jan 15, 2021 at 8:32 PM JH <jupiter.hce at gmail.com> wrote:
> The mtd build was fine, what could be missing not to link mtd?
> $ ls 2020.04-r0/build/mx6ull_14x14_evk_nand_config/drivers/mtd
>From all the build logs you have, it look to me that you're trying to
build the U-Boot delivered by NXP as a part of their BSP release.
In this case, I suggest you'd rather contact NXP support in order to
address this failure, since it is a vendor BSP you're trying to
In addition, I do not think that all mailing lists you've cross-posted
your question to would be able to help you here:
- linux-mtd list is not really appropriate to solve U-Boot build issues;
- u-boot list is for upstream U-Boot patches and discussions, which is
way past over 2020.04 version (not even considering that you're
building U-Boot from NXP fork);
- oe-core is not a proper list to post questions specific to one SOC vendor;
- meta-freescale 'gatesgarth' branch does not have any U-Boot build
configuration for mx6ull_14x14_evk_nand_config, the only available
build config provided is for sd card;
Having all those points above, I'd suggest you contact NXP support at
first to see if they can solve those build errors for you.
If you would find a solution, you can send a PR to meta-freescale to
address it - this would be much appreciated.
> built-in.o mtdcore.su mtdpart.o mtd_uboot.o mtd-uclass.o nand spi
> mtdcore.o mtd.o mtdpart.su mtd_uboot.su mtd-uclass.su onenand ubi
> On 1/15/21, Jupiter <jupiter.hce at gmail.com> wrote:
> > Hello,
> > I was able to build MTD, UBI and u-boot on OE version Zeus branch, but
> > failed in gatesgarth branch. Here are errors, what could I be missing?
> > u-boot-imx/2020.04-r0/git/cmd/ubi.c:478: undefined reference to
> > `mtd_probe_devices'
> > u-boot-imx/2020.04-r0/git/cmd/ubi.c:484: undefined reference to
> > `put_mtd_device'
> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/build.c:1161: undefined
> > reference to `put_mtd_device'
> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/build.c:1229: undefined
> > reference to `get_mtd_device_nm'
> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/io.c:1407: undefined
> > reference to `mtd_read'
> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/io.c:279: undefined
> > reference to `mtd_write'
> > u-boot-imx/2020.04-r0/git/drivers/video/cfb_console.c:2025: undefined
> > reference to `video_hw_init'
> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:51: undefined
> > reference to `dm_spi_claim_bus'
> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:55: undefined
> > reference to `dm_spi_xfer'
> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:58: undefined
> > reference to `dm_spi_release_bus'
> > u-boot-imx/2020.04-r0/git/Makefile:1701: recipe for target 'u-boot' failed
> > make: *** [u-boot] Error 1
> > WARNING: exit code 1 from a shell command.
> > There are a couple of warning messages I am not sure if they are
> > important or just nonsense, like CONFIG_DEFAULT_DEVICE_TREE has
> > already been defined but it complained:
> > Device Tree Source is not correctly specified.
> > Please define 'CONFIG_DEFAULT_DEVICE_TREE'
> > or build with 'DEVICE_TREE=<device_tree>' argument
> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:51:8: warning:
> > implicit declaration of function 'dm_spi_claim_bus'; did you mean
> > 'spi_claim_bus'? [-Wimplicit-function-declaration]
> > 51 | ret = dm_spi_claim_bus(dev);
> > | ^~~~~~~~~~~~~~~~
> > | spi_claim_bus
> > @
> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:55:8: warning:
> > implicit declaration of function 'dm_spi_xfer'; did you mean
> > 'spi_xfer'? [-Wimplicit-function-declaration]
> > 55 | ret = dm_spi_xfer(dev, priv->nregs * 8, priv->buffer, NULL,
> > | ^~~~~~~~~~~
> > | spi_xfer
> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:58:2: warning:
> > implicit declaration of function 'dm_spi_release_bus'; did you mean
> > 'spi_release_bus'? [-Wimplicit-function-declaration]
> > 58 | dm_spi_release_bus(dev);
> > | ^~~~~~~~~~~~~~~~~~
> > | spi_release_bus
> > Appreciate your advice.
> > Thank you very much.
> > Kind regards,
> > - jupiter
> "A man can fail many times, but he isn't a failure until he begins to
> blame somebody else."
> -- John Burroughs
> Links: You receive all messages sent to this group.
> View/Reply Online (#24489): https://lists.yoctoproject.org/g/meta-freescale/message/24489
> Mute This Topic: https://lists.yoctoproject.org/mt/79697340/3617192
> Group Owner: meta-freescale+owner at lists.yoctoproject.org
> Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub [andrey.z at gmail.com]
More information about the U-Boot