MTD UBI undefined reference failed to build OE gatesgarth branch
Jupiter
jupiter.hce at gmail.com
Mon Jan 18 01:21:54 CET 2021
Hi Tom and Lauren,
I failed to build mx6ull with MTD and UBI in OE and meta-freescahe
gatesgarth branch, please be aware that I was able to build it in zeus
branch, it seems something broken in gatesgarth branch.
My apology I am not clear if it is the issue for MTD or u-boot or
meta-freescale or OE so that I posted messages to several mailing
lists for help. Andrey Zhizhikin was very unhappy about it, he
believes it is your responsibility.
Could you please kindly respond if it is your jurisdiction and if you
tested and passed mx6ull with MTD UBI in gatesgarth branch or not?
My apology again for crossing mailing lists.
Kind regards,
- jupiter
On 1/16/21, Andrey Zhizhikin <andrey.z at gmail.com> wrote:
> Hello Jupiter,
>
> On Fri, Jan 15, 2021 at 8:32 PM JH <jupiter.hce at gmail.com> wrote:
>>
>> Hello,
>>
>> The mtd build was fine, what could be missing not to link mtd?
>>
>> $ ls 2020.04-r0/build/mx6ull_14x14_evk_nand_config/drivers/mtd
>
> From all the build logs you have, it look to me that you're trying to
> build the U-Boot delivered by NXP as a part of their BSP release.
>
> In this case, I suggest you'd rather contact NXP support in order to
> address this failure, since it is a vendor BSP you're trying to
> upgrade.
>
> In addition, I do not think that all mailing lists you've cross-posted
> your question to would be able to help you here:
> - linux-mtd list is not really appropriate to solve U-Boot build issues;
> - u-boot list is for upstream U-Boot patches and discussions, which is
> way past over 2020.04 version (not even considering that you're
> building U-Boot from NXP fork);
> - oe-core is not a proper list to post questions specific to one SOC
> vendor;
> - meta-freescale 'gatesgarth' branch does not have any U-Boot build
> configuration for mx6ull_14x14_evk_nand_config, the only available
> build config provided is for sd card;
>
> Having all those points above, I'd suggest you contact NXP support at
> first to see if they can solve those build errors for you.
>
> If you would find a solution, you can send a PR to meta-freescale to
> address it - this would be much appreciated.
>
>>
>> built-in.o mtdcore.su mtdpart.o mtd_uboot.o mtd-uclass.o nand
>> spi
>> mtdcore.o mtd.o mtdpart.su mtd_uboot.su mtd-uclass.su onenand
>> ubi
>>
>>
>>
>> On 1/15/21, Jupiter <jupiter.hce at gmail.com> wrote:
>> > Hello,
>> >
>> > I was able to build MTD, UBI and u-boot on OE version Zeus branch, but
>> > failed in gatesgarth branch. Here are errors, what could I be missing?
>> >
>> > u-boot-imx/2020.04-r0/git/cmd/ubi.c:478: undefined reference to
>> > `mtd_probe_devices'
>> > u-boot-imx/2020.04-r0/git/cmd/ubi.c:484: undefined reference to
>> > `put_mtd_device'
>> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/build.c:1161: undefined
>> > reference to `put_mtd_device'
>> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/build.c:1229: undefined
>> > reference to `get_mtd_device_nm'
>> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/io.c:1407: undefined
>> > reference to `mtd_read'
>> > u-boot-imx/2020.04-r0/git/drivers/mtd/ubi/io.c:279: undefined
>> > reference to `mtd_write'
>> >
>> > u-boot-imx/2020.04-r0/git/drivers/video/cfb_console.c:2025: undefined
>> > reference to `video_hw_init'
>> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:51: undefined
>> > reference to `dm_spi_claim_bus'
>> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:55: undefined
>> > reference to `dm_spi_xfer'
>> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:58: undefined
>> > reference to `dm_spi_release_bus'
>> > u-boot-imx/2020.04-r0/git/Makefile:1701: recipe for target 'u-boot'
>> > failed
>> > make[1]: *** [u-boot] Error 1
>> > WARNING: exit code 1 from a shell command.
>> >
>> > There are a couple of warning messages I am not sure if they are
>> > important or just nonsense, like CONFIG_DEFAULT_DEVICE_TREE has
>> > already been defined but it complained:
>> >
>> > Device Tree Source is not correctly specified.
>> > Please define 'CONFIG_DEFAULT_DEVICE_TREE'
>> > or build with 'DEVICE_TREE=<device_tree>' argument
>> >
>> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:51:8: warning:
>> > implicit declaration of function 'dm_spi_claim_bus'; did you mean
>> > 'spi_claim_bus'? [-Wimplicit-function-declaration]
>> > 51 | ret = dm_spi_claim_bus(dev);
>> > | ^~~~~~~~~~~~~~~~
>> > | spi_claim_bus
>> > @
>> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:55:8: warning:
>> > implicit declaration of function 'dm_spi_xfer'; did you mean
>> > 'spi_xfer'? [-Wimplicit-function-declaration]
>> > 55 | ret = dm_spi_xfer(dev, priv->nregs * 8, priv->buffer, NULL,
>> > | ^~~~~~~~~~~
>> > | spi_xfer
>> > u-boot-imx/2020.04-r0/git/drivers/gpio/74x164_gpio.c:58:2: warning:
>> > implicit declaration of function 'dm_spi_release_bus'; did you mean
>> > 'spi_release_bus'? [-Wimplicit-function-declaration]
>> > 58 | dm_spi_release_bus(dev);
>> > | ^~~~~~~~~~~~~~~~~~
>> > | spi_release_bus
>> >
>> > Appreciate your advice.
>> >
>> > Thank you very much.
>> >
>> > Kind regards,
>> >
>> > - jupiter
>> >
>>
>>
>> --
>> "A man can fail many times, but he isn't a failure until he begins to
>> blame somebody else."
>> -- John Burroughs
>>
>> -=-=-=-=-=-=-=-=-=-=-=-
>> Links: You receive all messages sent to this group.
>> View/Reply Online (#24489):
>> https://lists.yoctoproject.org/g/meta-freescale/message/24489
>> Mute This Topic: https://lists.yoctoproject.org/mt/79697340/3617192
>> Group Owner: meta-freescale+owner at lists.yoctoproject.org
>> Unsubscribe: https://lists.yoctoproject.org/g/meta-freescale/unsub
>> [andrey.z at gmail.com]
>> -=-=-=-=-=-=-=-=-=-=-=-
>>
>
>
> --
> Regards,
> Andrey.
>
--
"A man can fail many times, but he isn't a failure until he begins to
blame somebody else."
-- John Burroughs
More information about the U-Boot
mailing list