[PATCH 1/2] imx8mm_beacon: Enable QSPI Support

[Peng Fan]

> Subject: [PATCH 1/2] imx8mm_beacon: Enable QSPI Support
> 
> There is a QSPI chip connected to the FSPI.  Enable the defconfig to support
> it.
> 
> Signed-off-by: Adam Ford <aford173 at gmail.com>

Reviewed-by: Peng Fan <peng.fan at nxp.com>
> 
> diff --git a/configs/imx8mm_beacon_defconfig
> b/configs/imx8mm_beacon_defconfig index 49d5453078..2970e5dc71
> 100644
> --- a/configs/imx8mm_beacon_defconfig
> +++ b/configs/imx8mm_beacon_defconfig
> @@ -41,6 +41,7 @@ CONFIG_CMD_GPIO=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_MMC=y
>  CONFIG_CMD_PART=y
> +CONFIG_CMD_SPI=y
>  CONFIG_CMD_DHCP=y
>  CONFIG_CMD_MII=y
>  CONFIG_CMD_PING=y
> @@ -78,6 +79,14 @@ CONFIG_MMC_HS400_ES_SUPPORT=y
> CONFIG_MMC_HS400_SUPPORT=y
> CONFIG_SPL_MMC_HS400_SUPPORT=y  CONFIG_FSL_USDHC=y
> +CONFIG_MTD=y
> +CONFIG_DM_MTD=y
> +CONFIG_DM_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_MODE=0x0
> +CONFIG_SF_DEFAULT_SPEED=10000000
> +CONFIG_SPI_FLASH_BAR=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_SPI_FLASH_MTD=y
>  CONFIG_PHYLIB=y
>  CONFIG_PHY_ATHEROS=y
>  CONFIG_DM_ETH=y
> @@ -102,7 +111,6 @@ CONFIG_DM_SERIAL=y
>  CONFIG_MXC_UART=y
>  CONFIG_SPI=y
>  CONFIG_DM_SPI=y
> -CONFIG_SPI_MEM=y
>  CONFIG_NXP_FSPI=y
>  CONFIG_SYSRESET=y
>  CONFIG_SPL_SYSRESET=y
> --
> 2.25.1