Boot failure triggered by USB on rockpro64-rk3399 and pinebook-pro-rk3399

[Kever Yang]

Hi Vagrant,

     Do you know which version is the last version that works in this case?

     The firmware is from eMMC and it's wired for USB to affect the boot 
process.

Thanks,

- Kever

On 2021/1/21 上午8:08, Vagrant Cascadian wrote:
> It seems rockpro64-rk3399 and pinebook-pro-rk3399 fail to boot when usb
> is started. It hangs indefinitely at:
>
>    ## Flattened Device Tree blob at 01f00000
>       Booting using the fdt blob at 0x1f00000
>
> I have observed this also using 2020.10 on rockpro64-rk3399, though on
> pinebook-pro-rk3399 usb does not work and so it basically avoids
> triggering the issue.
>
> Setting CONFIG_USE_PREBOOT=n in the config works around the problem,
> though obviously by breaking usb keyboard support or booting from USB
> devices.
>
>
> Related bugs in Debian and manjaro:
>
>    https://bugs.debian.org/973323
>    https://bugs.debian.org/980434
>    https://gitlab.manjaro.org/manjaro-arm/packages/core/uboot-rockpro64/-/issues/4
>
>
> Boot log:
>
> U-Boot 2021.01+dfsg-1 (Jan 17 2021 - 03:50:13 +0000)
>
> SoC: Rockchip rk3399
> Reset cause: POR
> Model: Pine64 RockPro64 v2.1
> DRAM:  3.9 GiB
> PMIC:  RK808
> MMC:   mmc at fe310000: 2, mmc at fe320000: 1, sdhci at fe330000: 0
> Loading Environment from SPIFlash... SF: Detected gd25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> *** Warning - bad CRC, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Model: Pine64 RockPro64 v2.1
> Net:   eth0: ethernet at fe300000
> starting USB...
> Bus usb at fe380000: USB EHCI 1.00
> Bus usb at fe3a0000: USB OHCI 1.0
> Bus usb at fe3c0000: USB EHCI 1.00
> Bus usb at fe3e0000: USB OHCI 1.0
> Bus dwc3: usb maximum-speed not found
> Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.10
> scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
> scanning bus dwc3 for devices... 1 USB Device(s) found
>         scanning usb for storage devices... 0 Storage Device(s) found
> Hit any key to stop autoboot:  0
> => printenv preboot
> preboot=usb start
> => usb reset
> resetting USB...
> Bus usb at fe380000: USB EHCI 1.00
> Bus usb at fe3a0000: USB OHCI 1.0
> Bus usb at fe3c0000: USB EHCI 1.00
> Bus usb at fe3e0000: USB OHCI 1.0
> Bus dwc3: usb maximum-speed not found
> Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.10
> scanning bus usb at fe380000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3a0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3c0000 for devices... 1 USB Device(s) found
> scanning bus usb at fe3e0000 for devices... 1 USB Device(s) found
> scanning bus dwc3 for devices... 1 USB Device(s) found
>         scanning usb for storage devices... 0 Storage Device(s) found
> => boot
> Card did not respond to voltage select! : -110
> switch to partitions #0, OK
> mmc1 is current device
> Scanning mmc 1:1...
> Found /extlinux/extlinux.conf
> Retrieving file: /extlinux/extlinux.conf
> 144 bytes read in 5 ms (27.3 KiB/s)
> 1:      Debian-Installer
> Retrieving file: /initrd.gz
> 28995285 bytes read in 1287 ms (21.5 MiB/s)
> Retrieving file: /vmlinuz
> 26922864 bytes read in 1195 ms (21.5 MiB/s)
> Retrieving file: /dtbs/rockchip/rk3399-rockpro64.dtb
> 56849 bytes read in 13 ms (4.2 MiB/s)
> Moving Image from 0x2080000 to 0x2200000, end=3c50000
> ## Flattened Device Tree blob at 01f00000
>     Booting using the fdt blob at 0x1f00000
>
>
>
> live well,
>    vagrant