[PATCH 0/9] Add support for imx8mm-venice-gw7901 and DSA switch
Tim Harvey
tharvey at gateworks.com
Thu Jul 1 01:50:01 CEST 2021
The GW7901 is an IMX8M Mini based board with a KSZ9897 switch hanging
off the IMX8M FEC.
In order to support a fixed-link connection to a U-Boot DSA switch some
changes need to be made to the FEC driver.
Additionally, in order to support per-port unique MAC addrs for DSA we
must introduce a mechanism to put the master device in promiscuous mode.
All patches are here including adding the dts for the board as well as a
dsa driver and necessary patches to fec/dsa so that it is clear how this
fits together.
Tim Harvey (9):
board: gateworks: venice: add imx8mm-gw7901 support
net: fec: use device sequence vs index when fetching fec
net: fec: set phy_of_node properly for fixed-link phy
net: add set_promisc function to enable/disable Promiscuous mode
net: fec: add set_promisc function
net: dsa: enable master promisc mode if available and needed
net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch
arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration
configs: imx8mm_venice_defconfig: add support for gbe switch
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi | 118 ++
arch/arm/dts/imx8mm-venice-gw7901.dts | 1055 +++++++++++++++++
board/gateworks/venice/spl.c | 55 +-
configs/imx8mm_venice_defconfig | 6 +-
drivers/net/Kconfig | 7 +
drivers/net/Makefile | 1 +
drivers/net/fec_mxc.c | 21 +-
drivers/net/fec_mxc.h | 1 +
drivers/net/ksz9477.c | 547 +++++++++
include/net.h | 2 +
net/dsa-uclass.c | 9 +-
12 files changed, 1818 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/dts/imx8mm-venice-gw7901-u-boot.dtsi
create mode 100644 arch/arm/dts/imx8mm-venice-gw7901.dts
create mode 100644 drivers/net/ksz9477.c
--
2.17.1
More information about the U-Boot
mailing list