July 2021 Archives by subject
Starting: Thu Jul 1 00:03:58 CEST 2021
Ending: Sat Jul 31 23:12:58 CEST 2021
Messages: 3378
- 32bit GRUB on RISC-V
Heinrich Schuchardt
- 32bit GRUB on RISC-V
Tom Rini
- [[PATCH] tools: image-host: fix wrong return value
Igor Opaniuk
- [[PATCH] tools: image-host: fix wrong return value
Tom Rini
- [ANN] U-Boot v2021.07 released
Tom Rini
- [ANN] U-Boot v2021.07 released
Tom Rini
- [ANN] U-Boot v2021.07 released
Trevor Woerner
- [ANN] U-Boot v2021.07 released
Wolfgang Denk
- [ANN] U-Boot v2021.07 released
Tom Rini
- [ANN] U-Boot v2021.07 released
Trevor Woerner
- [ANN] U-Boot v2021.10-rc1 released
Tom Rini
- [BUG] U-Boot makes Linux kernel boot failed with "mmc1: invalid bus width" on RPi 400
Jian-Hong Pan
- [BUG] U-Boot makes Linux kernel boot failed with "mmc1: invalid bus width" on RPi 400
Jian-Hong Pan
- [EXT] [PATCH 1/3] arm: a37xx: pci: Extend validation for PCIe resources and oubound windows
Kostya Porotchkin
- [EXT] [PATCH 2/3] arm: a37xx: pci: Optimize a3700_fdt_fix_pcie_regions() when fixup offset is zero
Kostya Porotchkin
- [EXT] [PATCH 3/3] arm: a37xx: pci: Fix typo in comment
Kostya Porotchkin
- [EXT] [PATCH] arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions
Kostya Porotchkin
- [EXT] Re: [PATCH 1/9] net: eqos: Add PHY reset control for i.MX platform
Ye Li
- [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port
Patrick Wildt
- [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port
Fabio Estevam
- [EXT] Re: [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port
Patrick Wildt
- [EXT] Re: [RFC 1/7] ARM: mvebu: a38x: Correct mismatched bound warnings
Kostya Porotchkin
- [EXT] Re: Problem on imx: add rom api support on imx8mn
Ye Li
- [EXT] Re: Problem on imx: add rom api support on imx8mn
Michael Nazzareno Trimarchi
- [GIT PULL] TI changes for v2021.10-rc1
Lokesh Vutla
- [GIT PULL] TI changes for v2021.10-rc1
Tom Rini
- [GIT PULL] TI changes for v2021.10-rc2
Lokesh Vutla
- [GIT PULL] TI changes for v2021.10-rc2
Tom Rini
- [GIT PULL] xilinx patches for v2021.10
Michal Simek
- [GIT PULL] xilinx patches for v2021.10
Tom Rini
- [GIT PULL] xilinx patches for v2021.10-rc1
Michal Simek
- [GIT PULL] xilinx patches for v2021.10-rc1
Tom Rini
- [PATCH 0/2] Add MNT Reform 2 board support
Patrick Wildt
- [PATCH 0/2] Add support of the FXL6408 GPIO expander
Oleksandr Suvorov
- [PATCH 0/2] arm: allwinner: r40: add devicetree for Forlinx FETA40i-C & OKA40i-C
Ivan Uvarov
- [PATCH 0/2] board: sifive: unmatched: reset multiple devices in SPL
Vincent Chen
- [PATCH 0/2] board: sifive: unmatched: reset multiple devices in SPL
Vincent Chen
- [PATCH 0/2] cmd/sbi: add missing SBI information
Heinrich Schuchardt
- [PATCH 0/2] J721E/J7200 postdiv clk parenting/data fixes
Suman Anna
- [PATCH 0/2] Minor misc. cleanups for TI K3 SoCs
Suman Anna
- [PATCH 0/3] Add support for USB on ST-Ericsson Ux500
Stephan Gerhold
- [PATCH 0/3] arm64: zynqmp: Use sysreset framework for reset and poweroff
Michal Simek
- [PATCH 0/3] arm64: zynqmp: Use sysreset framework for reset and poweroff
Michal Simek
- [PATCH 0/3] arm: kirkwood: Convert the GoFlex Home board Ethernet and SATA to Driver Model.
Tony Dinh
- [PATCH 0/3] board: dragonboard410c: Fix some minor issues
Stephan Gerhold
- [PATCH 0/3] cmd: setexpr: add fmt format string operation
Wolfgang Denk
- [PATCH 0/3] Convert the Dreamplug Ethernet and SATA to Driver Model.
Tony Dinh
- [PATCH 0/3] Convert the Dreamplug Ethernet and SATA to Driver Model.
Stefan Roese
- [PATCH 0/3] dtoc: Improve support for 'ranges' property
Simon Glass
- [PATCH 0/3] J7200: Add support for HS400 speed mode
Lokesh Vutla
- [PATCH 0/3] Marvell SheevaPlug : convert Ethernet and SATA to Driver Model.
Tony Dinh
- [PATCH 0/3] Marvell SheevaPlug : convert Ethernet and SATA to Driver Model.
Stefan Roese
- [PATCH 0/3] sunxi: H616: SPI boot support
Andre Przywara
- [PATCH 0/3 v3] Inrtoduce TPM TIS
Ilias Apalodimas
- [PATCH 0/4] Add support for eMMC on ST-Ericsson Ux500(v2)
Stephan Gerhold
- [PATCH 0/4] Add support for eMMC on ST-Ericsson Ux500(v2)
Linus Walleij
- [PATCH 0/4] clk: at91: fix system clocks display for sam9x60
Claudiu Beznea
- [PATCH 0/4] crypto: Add new UCLASS_HASH
Chia-Wei Wang
- [PATCH 0/4] vpl: Introduce a verifying program loader
Simon Glass
- [PATCH 0/4] xilinx: Add RTC support for Xilinx ZynqMP
Michal Simek
- [PATCH 0/4] xilinx: zynqmp: Add support for dfu_alt_info setup at runtime
Michal Simek
- [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model.
Tony Dinh
- [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model.
Stefan Roese
- [PATCH 0/5] add measurement support
Masahisa Kojima
- [PATCH 0/5] arm: mvebu: Automatically detect CONFIG_SYS_TCLK
Pali Rohár
- [PATCH 0/5] Cleanup MAIN R5F boot from R5 SPL
Suman Anna
- [PATCH 0/5] Cleanup MAIN R5F boot from R5 SPL
Suman Anna
- [PATCH 0/5] Cleanup MAIN R5F boot from R5 SPL
Lokesh Vutla
- [PATCH 0/5] doc: Improve documentation for testing
Simon Glass
- [PATCH 0/5] Enable ECDSA FIT verification for stm32mp
Alexandru Gagniuc
- [PATCH 0/5] meson64_android: use BCB for reboot reason
Mattijs Korpershoek
- [PATCH 0/5] meson64_android: use BCB for reboot reason
Neil Armstrong
- [PATCH 0/5] meson64_android: use BCB for reboot reason
Mattijs Korpershoek
- [PATCH 0/5] stm32mp1: handle TF-A boot with FIP
Patrick Delaunay
- [PATCH 0/5] stm32mp1: handle TF-A boot with FIP
Simon Glass
- [PATCH 0/5] stm32mp1: handle TF-A boot with FIP
Patrick DELAUNAY
- [PATCH 0/5] stm32mp1: handle TF-A boot with FIP
Simon Glass
- [PATCH 0/6] AM64: Add support for higher speed modes and boot mode in eMMC
Lokesh Vutla
- [PATCH 0/6] arm64: synquacer: DeveloperBox updates
Masami Hiramatsu
- [PATCH 0/6] binman: Support compressing files in parallel
Simon Glass
- [PATCH 0/6] Convert MIPS Malta boards to PCI DM
Daniel Schwierzeck
- [PATCH 0/6] This patch set fixes minor issues related to tapdelays
Ashok Reddy Soma
- [PATCH 0/6] uniphier: Add PCIe host controller and Akebi96 board support
Kunihiko Hayashi
- [PATCH 0/6] VIM3: misc cleanups to prepare android support
Mattijs Korpershoek
- [PATCH 0/6] VIM3: misc cleanups to prepare android support
Neil Armstrong
- [PATCH 0/7] Arasan sdhci driver updates
Ashok Reddy Soma
- [PATCH 0/7] efi: Various tidy-ups and drop the default
Simon Glass
- [PATCH 0/7] efi: Various tidy-ups and drop the default
Mark Kettenis
- [PATCH 0/7] efi: Various tidy-ups and drop the default
Tom Rini
- [PATCH 0/7] efi: Various tidy-ups and drop the default
Simon Glass
- [PATCH 0/7] stm32mp: cmd_stm32key: updates
Hexagon Email Recovery
- [PATCH 0/7] x86: Various fixes to MTRR and FSP codes
Bin Meng
- [PATCH 0/8] dtoc: Improvements to warnings
Simon Glass
- [PATCH 0/8] imx8mm: Add serial download support
Fabio Estevam
- [PATCH 0/8] Patches for Toradex boards
Oleksandr Suvorov
- [PATCH 0/8] sunxi: mmc: Fixes and speed increase
Andre Przywara
- [PATCH 0/8] sunxi: mmc: Fixes and speed increase
Samuel Holland
- [PATCH 0/9] Add support for imx8mm-venice-gw7901 and DSA switch
Tim Harvey
- [PATCH 0/9] phyCORE-i.MX8MP Update
Teresa Remmet
- [PATCH 0/9] tpm: Enhance sandbox tpm2 emulation
Simon Glass
- [PATCH 0/9] tpm: Enhance sandbox tpm2 emulation
Simon Glass
- [PATCH 0/9] tpm: Enhance sandbox tpm2 emulation
Ilias Apalodimas
- [PATCH 0/9] tpm: Enhance sandbox tpm2 emulation
Simon Glass
- [PATCH 00/14] aspeed: Support secure boot chain with FIT image verification
Chia-Wei Wang
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Simon Glass
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Tom Rini
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Jonathan A. Kollasch
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Tom Rini
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Simon Glass
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Tom Rini
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Eugeniu Rosca
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Simon Glass
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Tom Rini
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Wolfgang Denk
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Wolfgang Denk
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Simon Glass
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Simon Glass
- [PATCH 00/15] lib: Add support for a decimal 0m prefix for numbers
Simon Glass
- [PATCH 00/17] Makefile: Start simplifying Makefile rules (Part A)
Simon Glass
- [PATCH 00/22] Various fixes and enhancements
Simon Glass
- [PATCH 00/27] Add F1C100s based PocketGo handheld support
Yifan Gu
- [PATCH 00/33] pci: Drop all pre-driver model code
Simon Glass
- [PATCH 01/11] imx: ventana: remove USB_KEYBOARD support
sbabic at denx.de
- [PATCH 01/11] imx: ventana: remove USB_KEYBOARD support
sbabic at denx.de
- [PATCH 01/14] aspeed: ast2600: Enlarge SRAM size
Chia-Wei Wang
- [PATCH 01/15] hash: Ensure verification hex pairs are terminated
Simon Glass
- [PATCH 01/17] README: Fix hyphenation in the directory docs
Simon Glass
- [PATCH 01/17] README: Fix hyphenation in the directory docs
Tom Rini
- [PATCH 01/18] snapper9260/snapper9g20: Disable USB
Tom Rini
- [PATCH 01/22] dm: core: Add logging for DM_SEQ_ALIAS
Simon Glass
- [PATCH 01/22] dm: core: Add logging for DM_SEQ_ALIAS
Simon Glass
- [PATCH 01/27] arm: arm926ejs: start.S: port save_boot_params support from armv7 code
Yifan Gu
- [PATCH 01/27] pci: Remove non-DM board_pci_fixup_dev() declaration
Tom Rini
- [PATCH 01/33] configs: Resync with savedefconfig
Simon Glass
- [PATCH 02/11] imx: ventana: remove unneeded includes
sbabic at denx.de
- [PATCH 02/11] imx: ventana: remove unneeded includes
sbabic at denx.de
- [PATCH 02/14] clk: ast2600: Add YCLK control for HACE
Chia-Wei Wang
- [PATCH 02/15] global: Convert simple_strtoul() with hex to hextoul()
Simon Glass
- [PATCH 02/17] Makefile: Sort the subdirectories
Simon Glass
- [PATCH 02/18] openrd: Perform base CONFIG_DM enablement
Tom Rini
- [PATCH 02/22] dm: Support lzma in the flashmap
Simon Glass
- [PATCH 02/22] dm: Support lzma in the flashmap
Simon Glass
- [PATCH 02/27] arm: arm926ej-s: add sunxi code
Yifan Gu
- [PATCH 02/27] ppc: Drop MPC837XERDB_SLAVE for now
Tom Rini
- [PATCH 02/33] pci: Drop old code from pci command
Simon Glass
- [PATCH 03/11] imx: ventana: increase SYS_BOOTM_LEN
sbabic at denx.de
- [PATCH 03/11] imx: ventana: increase SYS_BOOTM_LEN
sbabic at denx.de
- [PATCH 03/12] Revert "usb: gadget: fastboot: use correct max packet size"
Maxime Ripard
- [PATCH 03/14] crypto: aspeed: Add AST2600 HACE support
Chia-Wei Wang
- [PATCH 03/15] global: Convert simple_strtoul() with decimal to dectoul()
Simon Glass
- [PATCH 03/17] Makefile: Move phy rules into drivers/phy
Simon Glass
- [PATCH 03/18] pogo_e02: Perform base CONFIG_DM enablement
Tom Rini
- [PATCH 03/22] test: Allow CONFIG_SPL_LOAD_FIT to be disabled
Simon Glass
- [PATCH 03/22] test: Allow CONFIG_SPL_LOAD_FIT to be disabled
Simon Glass
- [PATCH 03/27] sunxi: add support for suniv architecture
Yifan Gu
- [PATCH 03/33] ppc: Remove UCP1020 board
Simon Glass
- [PATCH 03/33] ppc: Remove UCP1020 board
Tom Rini
- [PATCH 04/11] imx: ventana: add legacy uboot image support
sbabic at denx.de
- [PATCH 04/11] imx: ventana: add legacy uboot image support
sbabic at denx.de
- [PATCH 04/14] ast2600: spl: Add HACE probing
Chia-Wei Wang
- [PATCH 04/15] lib: Comment the base parameter with simple_strtoul/l()
Simon Glass
- [PATCH 04/17] Rename SPL_POWER_SUPPORT to SPL_POWER
Simon Glass
- [PATCH 04/17] Rename SPL_POWER_SUPPORT to SPL_POWER
Jaehoon Chung
- [PATCH 04/18] iconnect: Perform base CONFIG_DM enablement
Tom Rini
- [PATCH 04/22] test: Add DM_DMA to be disabled
Simon Glass
- [PATCH 04/22] test: Add DM_DMA to be disabled
Simon Glass
- [PATCH 04/27] m68k: Remove M5485 boards
Tom Rini
- [PATCH 04/27] sunxi: suniv: add support for Lichee Pi Nano
Yifan Gu
- [PATCH 04/33] pci: Drop old code from header file
Simon Glass
- [PATCH 05/11] imx: ventana: add PMIC fix for GW54xx-G
sbabic at denx.de
- [PATCH 05/11] imx: ventana: add PMIC fix for GW54xx-G
sbabic at denx.de
- [PATCH 05/14] ARM: dts: ast2600: Add HACE to device tree
Chia-Wei Wang
- [PATCH 05/15] lib: Drop unnecessary check for hex digit
Simon Glass
- [PATCH 05/17] Rename SPL_CRYPTO_SUPPORT to SPL_CRYPTO
Simon Glass
- [PATCH 05/18] ib62x0: Perform base CONFIG_DM enablement
Tom Rini
- [PATCH 05/22] test: Avoid a build error with SPL
Simon Glass
- [PATCH 05/22] test: Avoid a build error with SPL
Simon Glass
- [PATCH 05/27] m68k: Remove M5475x boards
Tom Rini
- [PATCH 05/27] sunxi: suniv: add boot sequence for SPL to try
Yifan Gu
- [PATCH 05/33] pci: Remove guard around compatibility functions
Simon Glass
- [PATCH 06/11] imx: ventana: put PFUZ100 regulators in continuous mode
sbabic at denx.de
- [PATCH 06/11] imx: ventana: put PFUZ100 regulators in continuous mode
sbabic at denx.de
- [PATCH 06/14] common: fit: Use hash.c to call CRC/SHA function
Chia-Wei Wang
- [PATCH 06/15] lib: Add tests for simple_strtoull()
Simon Glass
- [PATCH 06/17] Rename SPL_ETH_SUPPORT to SPL_ETH
Simon Glass
- [PATCH 06/18] dockstar: Perform base CONFIG_DM enablement
Tom Rini
- [PATCH 06/22] Makefile: Avoid rebuilding .dtb files each time
Simon Glass
- [PATCH 06/22] Makefile: Avoid rebuilding .dtb files each time
Simon Glass
- [PATCH 06/22] Makefile: Avoid rebuilding .dtb files each time
Masahiro Yamada
- [PATCH 06/22] Makefile: Avoid rebuilding .dtb files each time
Simon Glass
- [PATCH 06/27] sunxi: spi-spl: add support for SUNIV
Yifan Gu
- [PATCH 06/33] pci: Drop DM_PCI check from fdtdec
Simon Glass
- [PATCH 07/11] imx: ventana: put LTC3676 regulators in continuous mode
sbabic at denx.de
- [PATCH 07/11] imx: ventana: put LTC3676 regulators in continuous mode
sbabic at denx.de
- [PATCH 07/14] clk: ast2600: Add RSACLK control for ARCY
Chia-Wei Wang
- [PATCH 07/15] lib: Add octal tests for simple_strtoul/l()
Simon Glass
- [PATCH 07/17] Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEW
Simon Glass
- [PATCH 07/18] mx6memcal: Disable USB GADGET in SPL
Tom Rini
- [PATCH 07/22] sandbox: Support executables for more phases
Simon Glass
- [PATCH 07/22] sandbox: Support executables for more phases
Simon Glass
- [PATCH 07/27] ppc: Remove sbc8349 board
Tom Rini
- [PATCH 07/27] sunxi: add SPI0 node for suniv
Yifan Gu
- [PATCH 07/33] pci: Drop DM_PCI check from pci_common
Simon Glass
- [PATCH 08/11] imx: ventana: add DP83867 PHY LED configuration
sbabic at denx.de
- [PATCH 08/11] imx: ventana: add DP83867 PHY LED configuration
sbabic at denx.de
- [PATCH 08/14] crypto: aspeed: Add AST2600 ARCY support
Chia-Wei Wang
- [PATCH 08/15] lib: Move common digit-parsing code into a function
Simon Glass
- [PATCH 08/17] Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG
Simon Glass
- [PATCH 08/18] arm: Remove at91rm9200ek boards
Tom Rini
- [PATCH 08/22] sandbox: Add work-around for SDL2 display
Simon Glass
- [PATCH 08/22] sandbox: Add work-around for SDL2 display
Simon Glass
- [PATCH 08/22] sandbox: Add work-around for SDL2 display
Heinrich Schuchardt
- [PATCH 08/22] sandbox: Add work-around for SDL2 display
Simon Glass
- [PATCH 08/27] ppc: Remove many T104x boards
Tom Rini
- [PATCH 08/27] sunxi: enable SPI NOR on Lichee Pi Nano
Yifan Gu
- [PATCH 08/33] ppc: Drop CONFIG_SYS_PCI_SUBSYS_VENDORID
Simon Glass
- [PATCH 09/11] imx: ventana: display neteowrk PHY
sbabic at denx.de
- [PATCH 09/11] imx: ventana: display neteowrk PHY
sbabic at denx.de
- [PATCH 09/14] ast2600: spl: Add ARCY probing
Chia-Wei Wang
- [PATCH 09/15] doc: Convert command-line info to rST
Simon Glass
- [PATCH 09/17] Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOST
Simon Glass
- [PATCH 09/18] arm: Remove edb9315a board
Tom Rini
- [PATCH 09/22] sandbox: Use hinting with the display
Simon Glass
- [PATCH 09/22] sandbox: Use hinting with the display
Simon Glass
- [PATCH 09/27] ppc: Remove mpc8308_p1m board
Tom Rini
- [PATCH 09/27] sunxi: add defconfig for Lichee Pi Nano with SPI Flash support
Yifan Gu
- [PATCH 09/33] pci: powerpc: Drop old code
Simon Glass
- [PATCH 1/1] arm: Finish migration of HAS_FSL_XHCI_USB
Tom Rini
- [PATCH 1/1] config: MPC8548CDS: eliminate symbol CONFIG_SYS_ID_EEPROM
Heinrich Schuchardt
- [PATCH 1/1] doc: fix board/openpiton/riscv64.rst
Heinrich Schuchardt
- [PATCH 1/1] doc: fix board/openpiton/riscv64.rst
Tianrui Wei
- [PATCH 1/1] doc: remove qemu_capsule_update from index
Heinrich Schuchardt
- [PATCH 1/1] doc: remove qemu_capsule_update from index
Ilias Apalodimas
- [PATCH 1/1] doc: riscv: flashing SiFive boards
Heinrich Schuchardt
- [PATCH 1/1] doc: riscv: flashing SiFive boards
Bin Meng
- [PATCH 1/1] efi_loader: improve block device integration with DM
Matwey V. Kornilov
- [PATCH 1/1] efi_loader: improve block device integration with DM
Michael Walle
- [PATCH 1/1] efi_loader: select GPT partition support
Heinrich Schuchardt
- [PATCH 1/1] efi_loader: select GPT partition support
Heinrich Schuchardt
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Artem Panfilov
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Artem Panfilov
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Alex G.
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Alex G.
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Tom Rini
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Artem Panfilov
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Tom Rini
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Artem Panfilov
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Tom Rini
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Jonathan Gray
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Artem Panfilov
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Tom Rini
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Artem Panfilov
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Alex G.
- [PATCH 1/1] lib/ecdsa: Fix LibreSSL before v2.7.0
Simon Glass
- [PATCH 1/1] lib: disable CONFIG_SPL_HEXDUMP by default
Heinrich Schuchardt
- [PATCH 1/1] lib: disable CONFIG_SPL_HEXDUMP by default
Michael Walle
- [PATCH 1/1] lib: disable CONFIG_SPL_HEXDUMP by default
Patrick DELAUNAY
- [PATCH 1/1] sandbox: don't set SA_NODEFER in signal handler
Heinrich Schuchardt
- [PATCH 1/1] sandbox: don't set SA_NODEFER in signal handler
Simon Glass
- [PATCH 1/1] sandbox: don't set SA_NODEFER in signal handler
Simon Glass
- [PATCH 1/1] sandbox: don't set SA_NODEFER in signal handler
Simon Glass
- [PATCH 1/1] sandbox: ensure that state->ram_buf is in low memory
Simon Glass
- [PATCH 1/1] sandbox: fix sandbox_reset()
Simon Glass
- [PATCH 1/1] smbios: convert function descriptions to Sphinx style
Simon Glass
- [PATCH 1/1] smbios: error handling for invalid addresses
Simon Glass
- [PATCH 1/1] test: NULL dereference in test-uclass
Simon Glass
- [PATCH 1/1] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 1/1] tpm2: Add a TPMv2 MMIO TIS driver
Heinrich Schuchardt
- [PATCH 1/1] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 1/1] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 1/1] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 1/2] arm: allwinner: r40: add pinmux settings for MMC3 and UARTs 2, 4, 5&7
Ivan Uvarov
- [PATCH 1/2] arm: allwinner: r40: add pinmux settings for MMC3 and UARTs 2,4,5&7
Andre Przywara
- [PATCH 1/2] arm: dts: imx8mq: add MNT Reform 2
Patrick Wildt
- [PATCH 1/2] arm: mach-k3: j721e: Fix clk-data parenting for postdiv PLL clocks
Suman Anna
- [PATCH 1/2] arm: snapdragon: Use correct GICC register on APQ8016
Tom Rini
- [PATCH 1/2] board-info: Use sysinfo_get()
Marek Vasut
- [PATCH 1/2] board-info: Use sysinfo_get()
Simon Glass
- [PATCH 1/2] board-info: Use sysinfo_get()
Tom Rini
- [PATCH 1/2] board: sifive: compile stuff only related to SPL in SPL build
Zong Li
- [PATCH 1/2] board: sifive: unmatched: refine GEMGXL initialized function in SPL
Vincent Chen
- [PATCH 1/2] board: sifive: unmatched: refine GEMGXL initialized function in SPL
Leo Liang
- [PATCH 1/2] board: stemmy: Parse atags to get available memory
Stephan Gerhold
- [PATCH 1/2] board: stemmy: Parse atags to get available memory
Linus Walleij
- [PATCH 1/2] board: stemmy: Parse atags to get available memory
Tom Rini
- [PATCH 1/2] cache: add sifive composable cache driver
Zong Li
- [PATCH 1/2] cache: add sifive composable cache driver
Sean Anderson
- [PATCH 1/2] cache: add sifive composable cache driver
Zong Li
- [PATCH 1/2] clk: stm32mp1: add support of SYSCFG clock
Patrice CHOTARD
- [PATCH 1/2] clk: stm32mp1: add support of SYSCFG clock
Patrick DELAUNAY
- [PATCH 1/2] fdt: Tidy up the code a bit with fdt addr
Simon Glass
- [PATCH 1/2] fdt: Tidy up the code a bit with fdt addr
Simon Glass
- [PATCH 1/2] firmware: ti_sci: Include linux/err.h in ti_sci_protocol.h
Suman Anna
- [PATCH 1/2] gpio: Drop long unused DB8500 GPIO driver
Stephan Gerhold
- [PATCH 1/2] gpio: Drop long unused DB8500 GPIO driver
Linus Walleij
- [PATCH 1/2] gpio: Drop long unused DB8500 GPIO driver
Tom Rini
- [PATCH 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander
Oleksandr Suvorov
- [PATCH 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander
Simon Glass
- [PATCH 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander
Oleksandr Suvorov
- [PATCH 1/2] GPIO: fxl6408: Add support for FXL6408 GPIO expander
Simon Glass
- [PATCH 1/2] i2c: pcf8575: Remove not used members of pcf8575_chip structure
Tom Rini
- [PATCH 1/2] mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()
Bin Meng
- [PATCH 1/2] mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()
Pratyush Yadav
- [PATCH 1/2] mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()
Bin Meng
- [PATCH 1/2] mx6cuboxi: Fix the mmc device for the rootfs
Fabio Estevam
- [PATCH 1/2] mx6cuboxi: Fix the mmc device for the rootfs
Peter Robinson
- [PATCH 1/2] Nokia RX-51: Add support for booting kernel in zImage format
Lokesh Vutla
- [PATCH 1/2] phy: meson-axg-mipi: Rename "priv_auto_alloc_size" to "priv_auto"
Neil Armstrong
- [PATCH 1/2] pinctrl: change result for unsupported API
Patrick Delaunay
- [PATCH 1/2] pinctrl: change result for unsupported API
Simon Glass
- [PATCH 1/2] riscv: provide missing base extension functions
Heinrich Schuchardt
- [PATCH 1/2] riscv: provide missing base extension functions
Sean Anderson
- [PATCH 1/2] riscv: provide missing base extension functions
Leo Liang
- [PATCH 1/2] serial: a37xx: Use CONFIG_BAUDRATE for initializing early debug UART
Pali Rohár
- [PATCH 1/2] serial: a37xx: Use CONFIG_BAUDRATE for initializing early debug UART
Marek Behun
- [PATCH 1/2] serial: a37xx: Use CONFIG_BAUDRATE for initializing early debug UART
Stefan Roese
- [PATCH 1/2] serial: a37xx: Use CONFIG_BAUDRATE for initializing early debug UART
Stefan Roese
- [PATCH 1/2] spi: ich: Limit slave->max_read_size
Bin Meng
- [PATCH 1/2] spi: ich: Limit slave->max_read_size
Simon Glass
- [PATCH 1/2] spi: ich: Limit slave->max_read_size
Bin Meng
- [PATCH 1/2] spl: mmc: Factor out eMMC boot partition selection code
Marek Vasut
- [PATCH 1/2] spl: mmc: Factor out eMMC boot partition selection code
Jaehoon Chung
- [PATCH 1/2] stm32mp: use device sequence number in boot_instance variable
Patrick Delaunay
- [PATCH 1/2] stm32mp: use device sequence number in boot_instance variable
Patrice CHOTARD
- [PATCH 1/2] stm32mp: use device sequence number in boot_instance variable
Patrick DELAUNAY
- [PATCH 1/2] test/py: Use loop mounts if guestmount fails in filesystem tests
Tom Rini
- [PATCH 1/2] w1: w1-gpio: claim the gpio with correct initial flag
Eugen.Hristev at microchip.com
- [PATCH 1/2] x86: queensbay: Optimize disable_igd() a little
Bin Meng
- [PATCH 1/2] x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQ
Bin Meng
- [PATCH 1/2] x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQ
Bin Meng
- [PATCH 1/2] x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQ
Simon Glass
- [PATCH 1/2] x86: tsc: Rename X86_TSC_TIMER_EARLY_FREQ to X86_TSC_TIMER_FREQ
Bin Meng
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Ilias Apalodimas
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Simon Glass
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Ilias Apalodimas
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Simon Glass
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Ilias Apalodimas
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Simon Glass
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Ilias Apalodimas
- [PATCH 1/2 v2] tpm2: Introduce TIS tpm core
Simon Glass
- [PATCH 1/3] arm: a37xx: pci: Extend validation for PCIe resources and oubound windows
Pali Rohár
- [PATCH 1/3] arm: a37xx: pci: Extend validation for PCIe resources and oubound windows
Stefan Roese
- [PATCH 1/3] arm: a37xx: pci: Extend validation for PCIe resources and oubound windows
Stefan Roese
- [PATCH 1/3] ARM: dts: rmobile: Add sysinfo extras on R-Car Gen3
Marek Vasut
- [PATCH 1/3] arm: dts: sync the Rockhip 3399 SoCs from Linux
Peter Robinson
- [PATCH 1/3] arm: kirkwood: Dreamplug: Add DM Ethernet and DM SATA configs
Tony Dinh
- [PATCH 1/3] arm: kirkwood: Dreamplug: Add DM Ethernet and DM SATA configs
Stefan Roese
- [PATCH 1/3] arm: kirkwood: GoFlex Home: Add DM Ethernet, remove IDE, and add DM SATA configs
Tony Dinh
- [PATCH 1/3] arm: mvebu: Espressobin: Fix setting $fdtfile env
Pali Rohár
- [PATCH 1/3] arm: mvebu: Espressobin: Fix setting $fdtfile env
Stefan Roese
- [PATCH 1/3] arm: mvebu: Espressobin: Fix setting $fdtfile env
Stefan Roese
- [PATCH 1/3] board: dragonboard410c: Fix PHYS_SDRAM_1_SIZE
Stephan Gerhold
- [PATCH 1/3] board: dragonboard410c: Fix PHYS_SDRAM_1_SIZE
Ramon Fried
- [PATCH 1/3] board: dragonboard410c: Fix PHYS_SDRAM_1_SIZE
Tom Rini
- [PATCH 1/3] board: freescale: LX2160ARDB: Add MAINTAINER
Hexagon Email Recovery
- [PATCH 1/3] doc: Move devicetree control doc to rST
Simon Glass
- [PATCH 1/3] dtoc: Rename is_wider_than() to reduce confusion
Simon Glass
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Masami Hiramatsu
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Sughosh Ganu
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Takahiro Akashi
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Simon Glass
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3] efi_loader: rework messages for capsule updates
Heinrich Schuchardt
- [PATCH 1/3] Marvell Sheevaplug: Add DM Ethernet and DM SATA configs
Tony Dinh
- [PATCH 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Stephan Gerhold
- [PATCH 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Jaehoon Chung
- [PATCH 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Stephan Gerhold
- [PATCH 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Jaehoon Chung
- [PATCH 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Stephan Gerhold
- [PATCH 1/3] psci: Do not define do_poweroff() if CONFIG_SYSRESET_CMD_POWEROFF is enabled
Michal Simek
- [PATCH 1/3] smegw01: Allow booting the Yocto image by default
sbabic at denx.de
- [PATCH 1/3] smegw01: Allow booting the Yocto image by default
sbabic at denx.de
- [PATCH 1/3] smegw01: Allow booting the Yocto image by default
Stefano Babic
- [PATCH 1/3] sunxi: SPL SPI: Allow larger SPL
Andre Przywara
- [PATCH 1/3] sunxi: SPL SPI: Allow larger SPL
Jagan Teki
- [PATCH 1/3] ti: am43xx_evm: Switch to DISTRO_BOOT only
Tom Rini
- [PATCH 1/3] ti: am43xx_evm: Switch to DISTRO_BOOT only
Lokesh Vutla
- [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe
Fabio Estevam
- [PATCH 1/3] usb: ehci-mx6: move mode set/detect to probe
Tim Harvey
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Simon Glass
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Sughosh Ganu
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Simon Glass
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Simon Glass
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Simon Glass
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Simon Glass
- [PATCH 1/3 v2] efi_capsule: Move signature from DTB to .rodata
Ilias Apalodimas
- [PATCH 1/3 v3] tpm2: Introduce TIS tpm core
Ilias Apalodimas
- [PATCH 1/4] [v2] configs: ls1088aqds.h: Update mc size in env
Priyanka Jain
- [PATCH 1/4] arm64: rk3399: r4s: correct the LEDS label name
Xiaobo Tian
- [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config
Paul Barker
- [PATCH 1/4] arm: dts: am335x-boneblack: Extract common config
Lokesh Vutla
- [PATCH 1/4] clk: at91: clk-master: split master clock in pres and divider
Claudiu Beznea
- [PATCH 1/4] clk: k210: Fix checking if ulongs are less than 0
Sean Anderson
- [PATCH 1/4] clk: k210: Fix checking if ulongs are less than 0
Damien Le Moal
- [PATCH 1/4] clk: k210: Fix checking if ulongs are less than 0
Sean Anderson
- [PATCH 1/4] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Sean Anderson
- [PATCH 1/4] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Marek Vasut
- [PATCH 1/4] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Sean Anderson
- [PATCH 1/4] configs: ls1088aqds.h: Update mc size in env
Priyanka Jain
- [PATCH 1/4] dm: rtc: uclass: Add flag to control sequence numbering
Michal Simek
- [PATCH 1/4] lib/md5: Export progressive APIs
Chia-Wei Wang
- [PATCH 1/4] mmc: arm_pl180_mmci: Don't bind to all arm, primecell devices
Stephan Gerhold
- [PATCH 1/4] mmc: arm_pl180_mmci: Don't bind to all arm, primecell devices
Patrice CHOTARD
- [PATCH 1/4] mmc: arm_pl180_mmci: Don't bind to all arm,primecell devices
Jaehoon Chung
- [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board
Tony Dinh
- [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board
Stefan Roese
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Patrick Wildt
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Fabio Estevam
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Stefano Babic
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Marek Vasut
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Stefano Babic
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Patrick Wildt
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Marek Vasut
- [PATCH 1/4] phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Stefano Babic
- [PATCH 1/4] xilinx: zynqmp: Change multi_boot() to return value
Michal Simek
- [PATCH 1/5] arm: mach-k3: j721e: Move booting of Main R5FSS Core0 to A72 U-Boot
Suman Anna
- [PATCH 1/5] arm: mvebu: a38x: Detect CONFIG_SYS_TCLK from SAR register
Pali Rohár
- [PATCH 1/5] arm: stm32mp: add config for STM32IMAGE support
Patrick Delaunay
- [PATCH 1/5] arm: stm32mp: add config for STM32IMAGE support
Patrice CHOTARD
- [PATCH 1/5] board: gateworks: venice: gsc: fix typo
Tim Harvey
- [PATCH 1/5] board: gateworks: venice: gsc: fix typo
sbabic at denx.de
- [PATCH 1/5] dm: crypto: Define UCLASS API for ECDSA signature verification
Alexandru Gagniuc
- [PATCH 1/5] dm: crypto: Define UCLASS API for ECDSA signature verification
Patrick DELAUNAY
- [PATCH 1/5] doc: Create an intro section for testing
Simon Glass
- [PATCH 1/5] doc: Create an intro section for testing
Heinrich Schuchardt
- [PATCH 1/5] doc: Create an intro section for testing
Simon Glass
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Masahisa Kojima
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Heinrich Schuchardt
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Masahisa Kojima
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Simon Glass
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Masahisa Kojima
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Ilias Apalodimas
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Simon Glass
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Simon Glass
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Masahisa Kojima
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Ilias Apalodimas
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Ilias Apalodimas
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Masahisa Kojima
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Simon Glass
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Heinrich Schuchardt
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Simon Glass
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Heinrich Schuchardt
- [PATCH 1/5] efi_loader: increase eventlog buffer size
Simon Glass
- [PATCH 1/5] Revert "ARM: meson: Add support for fastboot_set_reboot_flag()"
Mattijs Korpershoek
- [PATCH 1/5] vinco: Enable DM_USB and DM_SPI_FLASH support
Tom Rini
- [PATCH 1/5] vinco: Enable DM_USB and DM_SPI_FLASH support
Tom Rini
- [PATCH 1/6] binman: Put compressed data into separate files
Simon Glass
- [PATCH 1/6] binman: Put compressed data into separate files
Simon Glass
- [PATCH 1/6] board: sifive: unmatched: add initial support for a platform ID EEPROM
Leo Liang
- [PATCH 1/6] board: synquacer: Initialize SCBM SMMU at board_init()
Masami Hiramatsu
- [PATCH 1/6] clk: uniphier: Add PCIe clock entry
Kunihiko Hayashi
- [PATCH 1/6] clk: uniphier: Add PCIe clock entry
Tom Rini
- [PATCH 1/6] configs: sei610: fix typo in header comment
Mattijs Korpershoek
- [PATCH 1/6] configs: sei610: fix typo in header comment
Neil Armstrong
- [PATCH 1/6] dm: pci: add option to map virtual system memory base address
Daniel Schwierzeck
- [PATCH 1/6] dm: pci: add option to map virtual system memory base address
Stefan Roese
- [PATCH 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Ashok Reddy Soma
- [PATCH 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Jaehoon Chung
- [PATCH 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Ashok Reddy Soma
- [PATCH 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Jaehoon Chung
- [PATCH 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Ashok Reddy Soma
- [PATCH 1/7] mmc: sdhci: Return error in case of failure
Ashok Reddy Soma
- [PATCH 1/7] mmc: sdhci: Return error in case of failure
Jaehoon Chung
- [PATCH 1/7] mmc: sdhci: Return error in case of failure
Ashok Reddy Soma
- [PATCH 1/7] mmc: sdhci: Return error in case of failure
Jaehoon Chung
- [PATCH 1/7] stm32mp: configs: activate the command stm32key only for ST boards
Patrice CHOTARD
- [PATCH 1/7] stm32mp: configs: activate the command stm32key only for ST boards
Hexagon Email Recovery
- [PATCH 1/7] stm32mp: configs: activate the command stm32key only for ST boards
Patrick DELAUNAY
- [PATCH 1/7] x86: fsp: Don't program MTRR for DRAM
Bin Meng
- [PATCH 1/8] board: colibri_vf: synchronize/improve memory options
Oleksandr Suvorov
- [PATCH 1/8] board: colibri_vf: synchronize/improve memory options
Tom Rini
- [PATCH 1/8] board: colibri_vf: synchronize/improve memory options
Oleksandr Suvorov
- [PATCH 1/8] dtoc: Avoid using subscripts on match objects
Simon Glass
- [PATCH 1/8] dtoc: Avoid using subscripts on match objects
Walter Lozano
- [PATCH 1/8] dtoc: Avoid using subscripts on match objects
Simon Glass
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Fabio Estevam
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Marek Vasut
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Fabio Estevam
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Marek Vasut
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Fabio Estevam
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Marek Vasut
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Tim Harvey
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Marek Vasut
- [PATCH 1/8] imx8mm: Fix USB reg addresses for i.MX8MM
Simon Glass
- [PATCH 1/9] arm: dts: imx8mp: Resync imx8mp device tree include
Teresa Remmet
- [PATCH 1/9] board: gateworks: venice: add imx8mm-gw7901 support
Tim Harvey
- [PATCH 1/9] board: gateworks: venice: add imx8mm-gw7901 support
sbabic at denx.de
- [PATCH 1/9] configs: imx8mm_venice_defconfig: remove unused SPL features
Tim Harvey
- [PATCH 1/9] net: eqos: Add PHY reset control for i.MX platform
Stefano Babic
- [PATCH 1/9] sandbox: tpm: Split out common nvdata code
Simon Glass
- [PATCH 10/11] imx: ventana: add support for DLC0700XDP21LF LCD display
sbabic at denx.de
- [PATCH 10/11] imx: ventana: add support for DLC0700XDP21LF LCD display
sbabic at denx.de
- [PATCH 10/14] ARM: dts: ast2600: Add ARCY to device tree
Chia-Wei Wang
- [PATCH 10/15] doc: Add a note about number representation
Simon Glass
- [PATCH 10/17] Rename GPIO_SUPPORT to GPIO
Simon Glass
- [PATCH 10/18] arm: Remove gplugd board
Tom Rini
- [PATCH 10/22] sandbox: Adjust the bloblist default address
Simon Glass
- [PATCH 10/22] sandbox: Adjust the bloblist default address
Simon Glass
- [PATCH 10/27] ppc: Remove ve8313 board
Tom Rini
- [PATCH 10/27] sunxi: add support for UART at PF for suniv
Yifan Gu
- [PATCH 10/33] pci: freescale: Drop old code
Simon Glass
- [PATCH 11/11] imx: ventana: display 'none' for MMC if board does not have it
sbabic at denx.de
- [PATCH 11/11] imx: ventana: display 'none' for MMC if board does not have it
sbabic at denx.de
- [PATCH 11/14] ast2600: spl: Locate load buffer in DRAM space
Chia-Wei Wang
- [PATCH 11/15] lib: Allow using 0x when a decimal value is requested
Simon Glass
- [PATCH 11/17] Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISC
Simon Glass
- [PATCH 11/18] arm: Remove nsa310s board
Tom Rini
- [PATCH 11/18] arm: Remove nsa310s board
Tom Rini
- [PATCH 11/18] arm: Remove nsa310s board
Tony Dinh
- [PATCH 11/22] cros_ec: Allow reading the battery-charge state
Simon Glass
- [PATCH 11/22] cros_ec: Allow reading the battery-charge state
Simon Glass
- [PATCH 11/27] ppc: Remove MPC8313ERDB boards
Tom Rini
- [PATCH 11/27] sunxi: do not set PF MMC0 pinmux when PF uart is used
Yifan Gu
- [PATCH 11/33] pci: dm: core: Drop DM_PCI check from devfdt_get_addr_pci()
Simon Glass
- [PATCH 12/14] configs: ast2600-evb: Enable SPL FIT support
Chia-Wei Wang
- [PATCH 12/15] lib: Support a decimal prefix 0m
Simon Glass
- [PATCH 12/17] i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACY
Simon Glass
- [PATCH 12/17] i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACY
Heiko Schocher
- [PATCH 12/18] arm: Remove spear300 boards
Tom Rini
- [PATCH 12/22] cros_ec: Drop cros_ec_entering_mode()
Simon Glass
- [PATCH 12/22] cros_ec: Drop cros_ec_entering_mode()
Simon Glass
- [PATCH 12/27] ppc: Remove caddy2 / vme8349 boards
Tom Rini
- [PATCH 12/27] sunxi: allow to enable MMC driver when using PF UART0
Yifan Gu
- [PATCH 12/33] ppc: Drop DM_PCI from config files
Simon Glass
- [PATCH 13/14] configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
Chia-Wei Wang
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Simon Glass
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Sean Anderson
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Wolfgang Denk
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Wolfgang Denk
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Simon Glass
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Wolfgang Denk
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Simon Glass
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Tom Rini
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Simon Glass
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Wolfgang Denk
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Simon Glass
- [PATCH 13/15] RFC: lib: Support a binary prefix 0y
Wolfgang Denk
- [PATCH 13/17] i2c: Fix the migration warning
Simon Glass
- [PATCH 13/17] i2c: Fix the migration warning
Heiko Schocher
- [PATCH 13/18] arm: Remove spear310 boards
Tom Rini
- [PATCH 13/22] cros_ec: Support the full-size vboot context
Simon Glass
- [PATCH 13/22] cros_ec: Support the full-size vboot context
Simon Glass
- [PATCH 13/27] ppc: Remove sbc8548 boards
Tom Rini
- [PATCH 13/27] sunxi: Don't provide enable_cache() on suniv
Yifan Gu
- [PATCH 13/33] pci: acpi: Drop DM_PCI check from ahci
Simon Glass
- [PATCH 14/14] configs: ast2600: Boot kernel FIT in DRAM
Chia-Wei Wang
- [PATCH 14/15] RFC: lib: Use 0o prefix for octal
Simon Glass
- [PATCH 14/17] i2c: Drop unused CONFIG_I2C
Simon Glass
- [PATCH 14/17] i2c: Drop unused CONFIG_I2C
Heiko Schocher
- [PATCH 14/18] arm: Remove spear320 boards
Tom Rini
- [PATCH 14/22] cros_ec: Use standard calls for recovery-request checking
Simon Glass
- [PATCH 14/22] cros_ec: Use standard calls for recovery-request checking
Simon Glass
- [PATCH 14/27] ppc: Remove TQM834x board
Tom Rini
- [PATCH 14/27] sunxi: implement clock driver for suniv f1c100s
Yifan Gu
- [PATCH 14/33] pci: usb: Drop DM_PCI from ohci
Simon Glass
- [PATCH 15/15] RFC: Change simple_strtoul() et al to default to hex
Simon Glass
- [PATCH 15/17] i2c: Create a new Kconfig for I2C
Simon Glass
- [PATCH 15/17] i2c: Create a new Kconfig for I2C
Heiko Schocher
- [PATCH 15/18] arm: Remove spear600 boards and the rest of SPEAr support
Tom Rini
- [PATCH 15/22] bloblist: Support resizing a blob
Simon Glass
- [PATCH 15/22] bloblist: Support resizing a blob
Simon Glass
- [PATCH 15/27] ppc: Remove MPC8541CDS board
Tom Rini
- [PATCH 15/27] sunxi: gpio: Add support for suniv-f1c100s
Yifan Gu
- [PATCH 15/33] ppc: malta: Drop use of DM_PCI
Simon Glass
- [PATCH 15/33] ppc: malta: Drop use of DM_PCI
Daniel Schwierzeck
- [PATCH 16/17] i2c: Rename SPL/TPL_I2C_SUPPORT to I2C
Simon Glass
- [PATCH 16/17] i2c: Rename SPL/TPL_I2C_SUPPORT to I2C
Heiko Schocher
- [PATCH 16/18] sniper: Add build guards around MUSB support code
Tom Rini
- [PATCH 16/22] bloblist: Tidy up a few API comments
Simon Glass
- [PATCH 16/22] bloblist: Tidy up a few API comments
Simon Glass
- [PATCH 16/27] ppc: Remove MPC8555CDS boards
Tom Rini
- [PATCH 16/27] sunxi: spi: restore bus speed and mode after reset
Yifan Gu
- [PATCH 16/33] ppc: socrates: Drop use of DM_PCI
Simon Glass
- [PATCH 17/17] Makefile: Move drivers/i2c/ into drivers/Makefile
Simon Glass
- [PATCH 17/18] usb: Add correct depends for CMD_USB_MASS_STORAGE
Tom Rini
- [PATCH 17/22] bloblist: Correct condition in bloblist_addrec()
Simon Glass
- [PATCH 17/22] bloblist: Correct condition in bloblist_addrec()
Simon Glass
- [PATCH 17/27] ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT
Tom Rini
- [PATCH 17/27] ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT
gianluca
- [PATCH 17/27] ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT
Tom Rini
- [PATCH 17/27] ppc: Remove T1023RBD boards and T1024RDB_SECURE_BOOT
gianluca
- [PATCH 17/27] sunxi: spi: Add suniv pin controller support
Yifan Gu
- [PATCH 17/33] pci: gt64120: Drop use of DM_PCI
Simon Glass
- [PATCH 17/33] pci: gt64120: Drop use of DM_PCI
Daniel Schwierzeck
- [PATCH 18/22] image: Allow @ in node names when not using signatures
Simon Glass
- [PATCH 18/22] image: Allow @ in node names when not using signatures
Simon Glass
- [PATCH 18/27] ppc: Remove MPC8568MDS board
Tom Rini
- [PATCH 18/27] sunxi: suniv: add device tree nodes for f1c100s MMC controllers
Yifan Gu
- [PATCH 18/33] pci: msc01: Drop use of DM_PCI
Simon Glass
- [PATCH 18/33] pci: msc01: Drop use of DM_PCI
Daniel Schwierzeck
- [PATCH 19/22] spl: Provide more information on boot failure
Simon Glass
- [PATCH 19/22] spl: Provide more information on boot failure
Simon Glass
- [PATCH 19/27] arm: dts: sunxi: do not renumber if mmc2 does not exist
Yifan Gu
- [PATCH 19/27] arm: dts: sunxi: do not renumber if mmc2 does not exist
Icenowy Zheng
- [PATCH 19/27] ppc: Remove kmcoge4 board
Tom Rini
- [PATCH 19/33] pci: imx: Drop use of DM_PCI
Simon Glass
- [PATCH 2/2] arm: allwinner: r40: add devicetree for Forlinx FETA40i-C & OKA40i-C
Ivan Uvarov
- [PATCH 2/2] arm: allwinner: r40: add devicetree for Forlinx FETA40i-C & OKA40i-C
Andre Przywara
- [PATCH 2/2] ARM: dts: stm32mp15: remove mmc alias
Patrick Delaunay
- [PATCH 2/2] ARM: dts: stm32mp15: remove mmc alias
Patrice CHOTARD
- [PATCH 2/2] ARM: dts: stm32mp15: remove mmc alias
Patrick DELAUNAY
- [PATCH 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
Marek Vasut
- [PATCH 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
Teresa Remmet
- [PATCH 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
Harald Seiler
- [PATCH 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
Marek Vasut
- [PATCH 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
Marek Vasut
- [PATCH 2/2] arm: mach-k3: common: Add a release_resources_for_core_shutdown() stub
Suman Anna
- [PATCH 2/2] arm: mach-k3: j7200: Fix clk-data parenting for postdiv PLL clocks
Suman Anna
- [PATCH 2/2] arm: snapdragon: Fix typo in clk_bcr_update()
Tom Rini
- [PATCH 2/2] board-info: Call sysinfo_detect() before sysinfo_get_str()
Marek Vasut
- [PATCH 2/2] board-info: Call sysinfo_detect() before sysinfo_get_str()
Simon Glass
- [PATCH 2/2] board-info: Call sysinfo_detect() before sysinfo_get_str()
Tom Rini
- [PATCH 2/2] board: mntre: imx8mq: Add MNT Reform 2 board support
Patrick Wildt
- [PATCH 2/2] board: sifive: overwrite board_fdt_blob_setup in u-boot proper
Zong Li
- [PATCH 2/2] board: sifive: unmatched: reset USB hub, PCIe-USB bridge, and ULPI device in SPL
Vincent Chen
- [PATCH 2/2] board: sifive: unmatched: reset USB hub, PCIe-USB bridge, and ULPI device in SPL
Leo Liang
- [PATCH 2/2] board: sifive: use ccache driver instead of helper function
Zong Li
- [PATCH 2/2] board: sifive: use ccache driver instead of helper function
Sean Anderson
- [PATCH 2/2] board: sifive: use ccache driver instead of helper function
Zong Li
- [PATCH 2/2] board: sifive: use ccache driver instead of helper function
Sean Anderson
- [PATCH 2/2] board: sifive: use ccache driver instead of helper function
Zong Li
- [PATCH 2/2] board: sifive: use ccache driver instead of helper function
Zong Li
- [PATCH 2/2] board: stemmy: Copy atags for booting downstream/vendor kernel
Stephan Gerhold
- [PATCH 2/2] board: stemmy: Copy atags for booting downstream/vendor kernel
Linus Walleij
- [PATCH 2/2] board: stemmy: Copy atags for booting downstream/vendor kernel
Tom Rini
- [PATCH 2/2] cmd/sbi: add missing SBI information
Heinrich Schuchardt
- [PATCH 2/2] cmd/sbi: add missing SBI information
Sean Anderson
- [PATCH 2/2] cmd/sbi: add missing SBI information
Heinrich Schuchardt
- [PATCH 2/2] cmd/sbi: add missing SBI information
Sean Anderson
- [PATCH 2/2] cmd/sbi: add missing SBI information
Leo Liang
- [PATCH 2/2] colibri-imx8x: add on-module gpio expander fxl6408
Oleksandr Suvorov
- [PATCH 2/2] dm: add debug message when failed to select the default pinctrl
Patrick Delaunay
- [PATCH 2/2] dm: add debug message when failed to select the default pinctrl
Simon Glass
- [PATCH 2/2] fdt: Show the type of devicetree with fdt addr
Simon Glass
- [PATCH 2/2] fdt: Show the type of devicetree with fdt addr
Simon Glass
- [PATCH 2/2] gpio: Add driver for Nomadik GPIO
Stephan Gerhold
- [PATCH 2/2] gpio: Add driver for Nomadik GPIO
Linus Walleij
- [PATCH 2/2] gpio: Add driver for Nomadik GPIO
Tom Rini
- [PATCH 2/2] i2c: pcf8575: Add support for 8 bit I2C IO expanders (like pca8574)
Tom Rini
- [PATCH 2/2] mtd: spi-nor: Mask out fast read if not requested in DT
Bin Meng
- [PATCH 2/2] mtd: spi-nor: Mask out fast read if not requested in DT
Pratyush Yadav
- [PATCH 2/2] mx6cuboxi: Fix the console variable
Fabio Estevam
- [PATCH 2/2] mx6cuboxi: Fix the console variable
Peter Robinson
- [PATCH 2/2] phy: meson-axg-mipi: Access parent ofnode through dev_ofnode()
Neil Armstrong
- [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()
Pali Rohár
- [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()
Marek Behun
- [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()
Pali Rohár
- [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()
Marek Behun
- [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()
Stefan Roese
- [PATCH 2/2] serial: a37xx: Do not call get_ref_clk() in _debug_uart_init()
Stefan Roese
- [PATCH 2/2] stm32mp: syscon: manage clock when present in device tree
Patrice CHOTARD
- [PATCH 2/2] stm32mp: syscon: manage clock when present in device tree
Patrick DELAUNAY
- [PATCH 2/2] test/py: Wait for guestmount worker to exit after running guestunmount
Tom Rini
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Heinrich Schuchardt
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Heinrich Schuchardt
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 2/2] tpm2: Add a TPMv2 MMIO TIS driver
Simon Glass
- [PATCH 2/2] x86: crownbay: Disable CONFIG_SPI_FLASH_SMART_HWCAPS
Bin Meng
- [PATCH 2/2] x86: crownbay: Disable CONFIG_SPI_FLASH_SMART_HWCAPS
Simon Glass
- [PATCH 2/2] x86: crownbay: Disable CONFIG_SPI_FLASH_SMART_HWCAPS
Bin Meng
- [PATCH 2/2] x86: crownbay: Use external graphics card by default
Bin Meng
- [PATCH 2/2] x86: dts: Define a default TSC timer frequency
Bin Meng
- [PATCH 2/2] x86: dts: Define a default TSC timer frequency
Simon Glass
- [PATCH 2/2] x86: dts: Define a default TSC timer frequency
Bin Meng
- [PATCH 2/3] arm64: zynqmp: Do not define do_reset() if sysreset is enabled
Michal Simek
- [PATCH 2/3] arm: a37xx: pci: Optimize a3700_fdt_fix_pcie_regions() when fixup offset is zero
Pali Rohár
- [PATCH 2/3] arm: a37xx: pci: Optimize a3700_fdt_fix_pcie_regions() when fixup offset is zero
Stefan Roese
- [PATCH 2/3] arm: dts: sync the Rockhip 3328 SoCs from Linux
Peter Robinson
- [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree
Tony Dinh
- [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree
Stefan Roese
- [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree
Tony Dinh
- [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree
Stefan Roese
- [PATCH 2/3] arm: kirkwood: Dreamplug: Use Ethernet PHY name and address from device tree
Stefan Roese
- [PATCH 2/3] arm: kirkwood: GoFlex Home: Add DM SATA configs
Tony Dinh
- [PATCH 2/3] arm: mvebu: Espressobin: Use function mmc_get_op_cond() for detecting eMMC
Pali Rohár
- [PATCH 2/3] arm: mvebu: Espressobin: Use function mmc_get_op_cond() for detecting eMMC
Stefan Roese
- [PATCH 2/3] ARM: rmobile: Enable I2C EEPROM support on R-Car Gen3
Marek Vasut
- [PATCH 2/3] arm: ti: environment: Move <environment/ti/boot.h> in to <configs/ti_omap5_common.h>
Tom Rini
- [PATCH 2/3] board: dragonboard410c: Fix fastboot
Stephan Gerhold
- [PATCH 2/3] board: dragonboard410c: Fix fastboot
Ramon Fried
- [PATCH 2/3] board: dragonboard410c: Fix fastboot
Tom Rini
- [PATCH 2/3] board: freescale: LX2160AQDS: Add MAINTAINER
Hexagon Email Recovery
- [PATCH 2/3] doc: Update devicedocs including how to add tweaks
Simon Glass
- [PATCH 2/3] doc: usage: add description for setexpr command
Simon Glass
- [PATCH 2/3] dtoc: Fix widening an int array to an int
Simon Glass
- [PATCH 2/3] efi_loader: missing EFI_CALL() in set_capsule_result
Heinrich Schuchardt
- [PATCH 2/3] Marvell Sheevaplug: Use Ethernet PHY name and address from device tree
Tony Dinh
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Ilias Apalodimas
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Masami Hiramatsu
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Takahiro Akashi
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Simon Glass
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Ilias Apalodimas
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Ilias Apalodimas
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Simon Glass
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Ilias Apalodimas
- [PATCH 2/3] mkeficapsule: Remove dtb related options
Simon Glass
- [PATCH 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Stephan Gerhold
- [PATCH 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Jaehoon Chung
- [PATCH 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Stephan Gerhold
- [PATCH 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Linus Walleij
- [PATCH 2/3] sunxi: SPL SPI: Add SPI boot support for the Allwinner H616 SoC
Andre Przywara
- [PATCH 2/3] sunxi: SPL SPI: Add SPI boot support for the Allwinner H616 SoC
Jagan Teki
- [PATCH 2/3] usb: ehci-mx6: add IMX8MM OTG support
Fabio Estevam
- [PATCH 2/3 v3] efi_loader: Force a sinlge FMP instance per hardware store
Heinrich Schuchardt
- [PATCH 2/3 v3] efi_loader: Force a sinlge FMP instance per hardware store
Ilias Apalodimas
- [PATCH 2/3 v3] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 2/3 v3] tpm2: Add a TPMv2 MMIO TIS driver
Heinrich Schuchardt
- [PATCH 2/3 v3] tpm2: Add a TPMv2 MMIO TIS driver
Ilias Apalodimas
- [PATCH 2/4] [v2] configs: ls1088ardb.h: Update mc size in env
Priyanka Jain
- [PATCH 2/4] arm64: rk3399: r4s: Inheritance uses the sdmmc definition in dtsi
Xiaobo Tian
- [PATCH 2/4] arm: dts: imx8mq: Add alias for two usb controllers
Patrick Wildt
- [PATCH 2/4] cmd: date: rtc: Update command to read the first RTC with seq 0
Michal Simek
- [PATCH 2/4] configs: ls1088ardb.h: Update mc size in env
Priyanka Jain
- [PATCH 2/4] cpu: at91: add compatible for ARM9260EJ-S
Claudiu Beznea
- [PATCH 2/4] dm: hash: Add new UCLASS_HASH support
Chia-Wei Wang
- [PATCH 2/4] k210: clk: Refactor out_of_spec tests
Sean Anderson
- [PATCH 2/4] mmc: arm_pl180_mmci: Simplify code using dev_read_addr_ptr()
Stephan Gerhold
- [PATCH 2/4] mmc: arm_pl180_mmci: Simplify code using dev_read_addr_ptr()
Patrice CHOTARD
- [PATCH 2/4] mmc: arm_pl180_mmci: Simplify code using dev_read_addr_ptr()
Jaehoon Chung
- [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
Tony Dinh
- [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs
Stefan Roese
- [PATCH 2/4] usb: f_mass_storage: Check bh->state in sleep_thread
Sean Anderson
- [PATCH 2/4] xilinx: zynqmp: use zynqmp_mmio_read() in multi_boot()
Michal Simek
- [PATCH 2/5] arm: mach-k3: j721e: Cleanup MAIN R5 boot code from R5 SPL
Suman Anna
- [PATCH 2/5] arm: mvebu: a37x: Detect CONFIG_SYS_TCLK from SAR register
Pali Rohár
- [PATCH 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
Patrick Delaunay
- [PATCH 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
Patrice CHOTARD
- [PATCH 2/5] board: gateworks: venice: gsc: fix voltage offset
Tim Harvey
- [PATCH 2/5] board: gateworks: venice: gsc: fix voltage offset
sbabic at denx.de
- [PATCH 2/5] configs: meson64_android: use BCB for reboot to bootloader
Mattijs Korpershoek
- [PATCH 2/5] doc: Move coccinelle into its own section
Simon Glass
- [PATCH 2/5] doc: Move coccinelle into its own section
Heinrich Schuchardt
- [PATCH 2/5] doc: Move coccinelle into its own section
Simon Glass
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Masahisa Kojima
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Simon Glass
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Ilias Apalodimas
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Simon Glass
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Ilias Apalodimas
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Heinrich Schuchardt
- [PATCH 2/5] efi_loader: add secure boot variable measurement
Masahisa Kojima
- [PATCH 2/5] lib: ecdsa: Implement UCLASS_ECDSA verification on target
Alexandru Gagniuc
- [PATCH 2/5] lib: ecdsa: Implement UCLASS_ECDSA verification on target
Patrick DELAUNAY
- [PATCH 2/5] m68k: Remove M54455EVB board
Tom Rini
- [PATCH 2/5] m68k: Remove M54455EVB board
Tom Rini
- [PATCH 2/6] binman: Support multithreading for building images
Simon Glass
- [PATCH 2/6] binman: Support multithreading for building images
Simon Glass
- [PATCH 2/6] configs: meson64_android: fix bad indent in EXTRA_ENV_SETTINGS
Mattijs Korpershoek
- [PATCH 2/6] configs: meson64_android: fix bad indent in EXTRA_ENV_SETTINGS
Neil Armstrong
- [PATCH 2/6] configs: synquacer: Make U-Boot binary position independent
Masami Hiramatsu
- [PATCH 2/6] configs: synquacer: Make U-Boot binary position independent
Marek Behún
- [PATCH 2/6] configs: synquacer: Make U-Boot binary position independent
Masami Hiramatsu
- [PATCH 2/6] mmc: zynq_sdhci: Allow configuring zero Tap values
Ashok Reddy Soma
- [PATCH 2/6] pci: gt64120: convert to driver model
Daniel Schwierzeck
- [PATCH 2/6] pci: gt64120: convert to driver model
Simon Glass
- [PATCH 2/6] reset: uniphier: Add PCIe reset entry
Kunihiko Hayashi
- [PATCH 2/6] reset: uniphier: Add PCIe reset entry
Tom Rini
- [PATCH 2/6] riscv: sifive: fu740: kconfig: Enable support for Opencores I2C controller
Leo Liang
- [PATCH 2/7] stm32mp: cmd_stm32key: use sub command
Patrice CHOTARD
- [PATCH 2/7] stm32mp: cmd_stm32key: use sub command
Patrick DELAUNAY
- [PATCH 2/7] x86: mtrr: Do not clear the unused ones in mtrr_commit()
Bin Meng
- [PATCH 2/7] zynqmp_firmware: Add zynqmp firmware related enums
Ashok Reddy Soma
- [PATCH 2/8] board: colibri_imx7: use SDP if USB serial downloader has been used
Oleksandr Suvorov
- [PATCH 2/8] clock_imx8mm: Add enable_usboh3_clk() for i.MX8M
Fabio Estevam
- [PATCH 2/8] dtoc: Convert to use ArgumentParser
Simon Glass
- [PATCH 2/8] dtoc: Convert to use ArgumentParser
Walter Lozano
- [PATCH 2/8] dtoc: Convert to use ArgumentParser
Simon Glass
- [PATCH 2/9] arm: dts: imx8mm-venice-gw71xx: fix USB OTG VBUS
Tim Harvey
- [PATCH 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Teresa Remmet
- [PATCH 2/9] net: fec: use device sequence vs index when fetching fec
Tim Harvey
- [PATCH 2/9] net: fec: use device sequence vs index when fetching fec
Ramon Fried
- [PATCH 2/9] net: fec: use device sequence vs index when fetching fec
sbabic at denx.de
- [PATCH 2/9] sandbox: tpm: Tidy up reading and writing of device state
Simon Glass
- [PATCH 20/22] sandbox: mmc: Support fixed MMC devices
Simon Glass
- [PATCH 20/22] sandbox: mmc: Support fixed MMC devices
Jaehoon Chung
- [PATCH 20/22] sandbox: mmc: Support fixed MMC devices
Simon Glass
- [PATCH 20/27] board: licheepi_nano: set CONFIG_MMC_SUNXI_SLOT_EXTRA
Yifan Gu
- [PATCH 20/27] ppc: Remove xpedite boards
Tom Rini
- [PATCH 20/33] pci: scsi: pci: Drop DM_PCI check from scsi
Simon Glass
- [PATCH 21/22] blk: Support iteration
Simon Glass
- [PATCH 21/22] blk: Support iteration
Simon Glass
- [PATCH 21/27] ppc: Remove sbc8641d board
Tom Rini
- [PATCH 21/27] sunxi: suniv: add missing header include for udelay
Yifan Gu
- [PATCH 21/33] pci: Drop DM_PCI check from bios_emul
Simon Glass
- [PATCH 22/22] log: Allow padding of the function name
Simon Glass
- [PATCH 22/22] log: Allow padding of the function name
Simon Glass
- [PATCH 22/27] ppc: Remove MPC8315ERDB board
Tom Rini
- [PATCH 22/27] sunxi: suniv: allow serial connection on uart1
Yifan Gu
- [PATCH 22/33] net: Drop DM_PCI check from designware driver
Simon Glass
- [PATCH 22/33] net: Drop DM_PCI check from designware driver
Ramon Fried
- [PATCH 23/27] ppc: Remove MPC8323ERDB board
Tom Rini
- [PATCH 23/27] sunxi: suniv: do not detect boot sector on suniv
Yifan Gu
- [PATCH 23/33] pci: imx: Drop DM_PCI check from cpu driver
Simon Glass
- [PATCH 24/27] ppc: Remove MPC832XEMDS boards
Tom Rini
- [PATCH 24/27] sunxi: suniv: set SYS_TEXT_BASE default
Yifan Gu
- [PATCH 24/33] pci: arm: mvebu: Drop DM_PCI check from
Simon Glass
- [PATCH 25/27] sunxi: suniv: disable mmc optimization for suniv
Yifan Gu
- [PATCH 25/33] pci: sata_sil: Drop DM_PCI checks
Simon Glass
- [PATCH 26/27] arm: dts: suniv: define uart1 pins
Yifan Gu
- [PATCH 26/27] configs: Remove unnecessary CONFIG_DM_PCI_COMPAT=y
Tom Rini
- [PATCH 26/33] distro_bootcmd: Drop DM_PCI check
Simon Glass
- [PATCH 27/27] arm: dts: add pocketgo handheld support
Yifan Gu
- [PATCH 27/27] pci: Require DM_PCI
Tom Rini
- [PATCH 27/33] pci: Drop pci_init_board()
Simon Glass
- [PATCH 28/33] pci: ppc: Drop ftpci100 driver
Simon Glass
- [PATCH 29/33] ppc: Drop idt8t49n222a_serdes_clk driver
Simon Glass
- [PATCH 3/3] arm64: zynqmp: Enable reset and poweroff via sysreset framework
Michal Simek
- [PATCH 3/3] arm: a37xx: pci: Fix typo in comment
Pali Rohár
- [PATCH 3/3] arm: a37xx: pci: Fix typo in comment
Stefan Roese
- [PATCH 3/3] arm: dts: sync the Rockhip 3368 SoCs from Linux
Peter Robinson
- [PATCH 3/3] arm: kirkwood: Dreamplug: Add DM SATA and remove IDE configs
Tony Dinh
- [PATCH 3/3] arm: kirkwood: Dreamplug: Add DM SATA and remove IDE configs
Stefan Roese
- [PATCH 3/3] arm: kirkwood: GoFlex Home: Use Ethernet PHY name and address from device tree
Tony Dinh
- [PATCH 3/3] ARM: rmobile: Enable sysinfo on R-Car Gen3
Marek Vasut
- [PATCH 3/3] board: freescale: LX2162AQDS: Add MAINTAINER
Hexagon Email Recovery
- [PATCH 3/3] doc: Add a note about why devicetree is used
Simon Glass
- [PATCH 3/3] doc: Update CapsuleUpdate READMEs
Ilias Apalodimas
- [PATCH 3/3] doc: Update CapsuleUpdate READMEs
Heinrich Schuchardt
- [PATCH 3/3] doc: Update CapsuleUpdate READMEs
Ilias Apalodimas
- [PATCH 3/3] doc: Update CapsuleUpdate READMEs
AKASHI Takahiro
- [PATCH 3/3] doc: Update CapsuleUpdate READMEs
Ilias Apalodimas
- [PATCH 3/3] dtoc: Support widening a bool value
Simon Glass
- [PATCH 3/3] efi_loader: set CapsuleLast after each capsule
Heinrich Schuchardt
- [PATCH 3/3] Marvell Sheevaplug: Add DM SATA and remove IDE configs
Tony Dinh
- [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Pali Rohár
- [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Baruch Siach
- [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Stefan Roese
- [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Stefan Roese
- [PATCH 3/3] mmc: mmc_get_op_cond: Allow quiet detection of eMMC
Jaehoon Chung
- [PATCH 3/3] serial: serial_msm: Delay initialization to let pins stabilize
Stephan Gerhold
- [PATCH 3/3] serial: serial_msm: Delay initialization to let pins stabilize
Ramon Fried
- [PATCH 3/3] serial: serial_msm: Delay initialization to let pins stabilize
Stephan Gerhold
- [PATCH 3/3] serial: serial_msm: Delay initialization to let pins stabilize
Tom Rini
- [PATCH 3/3] smegw01: Select the CMD_UNZIP option
sbabic at denx.de
- [PATCH 3/3] smegw01: Select the CMD_UNZIP option
sbabic at denx.de
- [PATCH 3/3] sunxi: OrangePi Zero 2: Enable SPI booting
Andre Przywara
- [PATCH 3/3] sunxi: OrangePi Zero 2: Enable SPI booting
Jagan Teki
- [PATCH 3/3] test: cmd: setexpr: add tests for format string operations
Simon Glass
- [PATCH 3/3] ti: omap5: Switch to generic distro boot for non-Android cases
Tom Rini
- [PATCH 3/3] usb: musb-new: Add glue driver for ST-Ericsson Ux500
Stephan Gerhold
- [PATCH 3/3] usb: musb-new: Add glue driver for ST-Ericsson Ux500
Linus Walleij
- [PATCH 3/3 v3] MAINTAINERS: Add entry for TPM drivers
Ilias Apalodimas
- [PATCH 3/3 v3] MAINTAINERS: Add entry for TPM drivers
Heinrich Schuchardt
- [PATCH 3/3 v3] MAINTAINERS: Add entry for TPM drivers
Simon Glass
- [PATCH 3/4] [v2] configs: ls2080aqds.h: Update mc size in env
Priyanka Jain
- [PATCH 3/4] arm64: rk3399: r4s: Remove undesirable MAC address fetching methods for ethernet
Xiaobo Tian
- [PATCH 3/4] ARM: dts: at91: sam9x60: add bindings for CPU
Claudiu Beznea
- [PATCH 3/4] arm: imx8mq: Add USB clock init function
Patrick Wildt
- [PATCH 3/4] configs: ls2080aqds.h: Update mc size in env
Priyanka Jain
- [PATCH 3/4] crypto: hash: Add software hash DM driver
Chia-Wei Wang
- [PATCH 3/4] mmc: arm_pl180_mmci: Simplify code using mmc_of_parse()
Stephan Gerhold
- [PATCH 3/4] mmc: arm_pl180_mmci: Simplify code using mmc_of_parse()
Patrice CHOTARD
- [PATCH 3/4] mmc: arm_pl180_mmci: Simplify code using mmc_of_parse()
Jaehoon Chung
- [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
Tony Dinh
- [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
Stefan Roese
- [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
Stefan Roese
- [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree
Tony (bodhi)
- [PATCH 3/4] rtc: zynqmp: Add support for ZynqMP RTC
Michal Simek
- [PATCH 3/4] test: dm: k210: Reduce duplication in test cases
Sean Anderson
- [PATCH 3/4] test: dm: k210: Reduce duplication in test cases
Simon Glass
- [PATCH 3/4] usb: f_mass_storage: Drop wakeup_needed
Sean Anderson
- [PATCH 3/4] xilinx: zynqmp: Config non zero SYS_SPI_U_BOOT_OFFS
Michal Simek
- [PATCH 3/5] arm: mach-k3: Cleanup common start_non_linux_remote_cores()
Suman Anna
- [PATCH 3/5] arm: mvebu: msys: Set CONFIG_SYS_TCLK globally
Pali Rohár
- [PATCH 3/5] arm: stm32mp1: Implement ECDSA signature verification
Alexandru Gagniuc
- [PATCH 3/5] arm: stm32mp1: Implement ECDSA signature verification
Patrick DELAUNAY
- [PATCH 3/5] arm: stm32mp: add defconfig for trusted boot with FIP
Patrick Delaunay
- [PATCH 3/5] arm: stm32mp: add defconfig for trusted boot with FIP
Patrice CHOTARD
- [PATCH 3/5] board: gateworks: venice: display DTB used
Tim Harvey
- [PATCH 3/5] board: gateworks: venice: display DTB used
sbabic at denx.de
- [PATCH 3/5] configs: meson64_android: implement recovery boot via BCB
Mattijs Korpershoek
- [PATCH 3/5] doc: Add docs for the moveconfig tool
Simon Glass
- [PATCH 3/5] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH 3/5] efi_loader: add boot variable measurement
Ilias Apalodimas
- [PATCH 3/5] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH 3/5] efi_loader: add boot variable measurement
Heinrich Schuchardt
- [PATCH 3/5] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH 3/5] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH 3/5] efi_loader: add boot variable measurement
Heinrich Schuchardt
- [PATCH 3/5] efi_loader: add boot variable measurement
AKASHI Takahiro
- [PATCH 3/5] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH 3/5] m68k: Remove M54418TWR board
Tom Rini
- [PATCH 3/5] m68k: Remove M54418TWR board
Tom Rini
- [PATCH 3/6] binman: Split node-reading out from constructor in files
Simon Glass
- [PATCH 3/6] binman: Split node-reading out from constructor in files
Simon Glass
- [PATCH 3/6] configs: meson64_android: use CONFIG_FASTBOOT_USB_DEV
Mattijs Korpershoek
- [PATCH 3/6] configs: meson64_android: use CONFIG_FASTBOOT_USB_DEV
Neil Armstrong
- [PATCH 3/6] dts: synquacer: Add partition information to the spi-nor
Masami Hiramatsu
- [PATCH 3/6] dts: synquacer: Add partition information to the spi-nor
Marek Behún
- [PATCH 3/6] dts: synquacer: Add partition information to the spi-nor
Masami Hiramatsu
- [PATCH 3/6] dts: synquacer: Add partition information to the spi-nor
Marek Behún
- [PATCH 3/6] mmc: zynq_sdhci: Use Mask writes for Tap delays
Ashok Reddy Soma
- [PATCH 3/6] net: dsa: refactor the code to set the port MAC address into a dedicated function
Priyanka Jain
- [PATCH 3/6] pci: msc01: convert to driver model
Daniel Schwierzeck
- [PATCH 3/6] pci: msc01: convert to driver model
Simon Glass
- [PATCH 3/6] phy: socionext: Add UniPhier PCIe PHY driver
Kunihiko Hayashi
- [PATCH 3/6] phy: socionext: Add UniPhier PCIe PHY driver
Tom Rini
- [PATCH 3/6] riscv: sifive: fu740: Support i2c in spl
Leo Liang
- [PATCH 3/7] mmc: zynq_sdhci: Use xilinx pm request instead of mmio_write
Ashok Reddy Soma
- [PATCH 3/7] mmc: zynq_sdhci: Use xilinx pm request instead of mmio_write
Jaehoon Chung
- [PATCH 3/7] stm32mp: cmd_stm32key: handle error in fuse_hash_value
Patrice CHOTARD
- [PATCH 3/7] stm32mp: cmd_stm32key: handle error in fuse_hash_value
Hexagon Email Recovery
- [PATCH 3/7] stm32mp: cmd_stm32key: handle error in fuse_hash_value
Patrick DELAUNAY
- [PATCH 3/7] x86: mtrr: Skip MSRs that were already programmed in mtrr_commit()
Bin Meng
- [PATCH 3/8] board: toradex: make USB PID from config block optional
Oleksandr Suvorov
- [PATCH 3/8] dtoc: Allow multiple warnings for a driver
Simon Glass
- [PATCH 3/8] dtoc: Allow multiple warnings for a driver
Walter Lozano
- [PATCH 3/8] dtoc: Allow multiple warnings for a driver
Simon Glass
- [PATCH 3/8] dtoc: Allow multiple warnings for a driver
Simon Glass
- [PATCH 3/8] usb: ehci-mx6: move mode set/detect to probe
Fabio Estevam
- [PATCH 3/9] arm: dts: imx8mm-venice-gw700x: fix fifo-depth phy props
Tim Harvey
- [PATCH 3/9] arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
Teresa Remmet
- [PATCH 3/9] net: fec: set phy_of_node properly for fixed-link phy
Tim Harvey
- [PATCH 3/9] net: fec: set phy_of_node properly for fixed-link phy
Ramon Fried
- [PATCH 3/9] net: fec: set phy_of_node properly for fixed-link phy
sbabic at denx.de
- [PATCH 3/9] sandbox: tpm: Support the define-space command
Simon Glass
- [PATCH 30/33] ppc: Drop t4qds and b4860qds references
Simon Glass
- [PATCH 31/33] pci: Drop PCI_INDIRECT_BRIDGE
Simon Glass
- [PATCH 31/37] crypto: caam: Add fsl caam driver
Peng Fan (OSS)
- [PATCH 31/37] crypto: caam: Add fsl caam driver
Stefano Babic
- [PATCH 32/33] pci: Drop DM_PCI
Simon Glass
- [PATCH 33/33] pci: Drop migration method
Simon Glass
- [PATCH 4/4] [v2] configs: ls2080ardb.h: Update mc size in env
Priyanka Jain
- [PATCH 4/4] arm64: rk3399: r4s: disabled i2c4 bus during the system boot process
Xiaobo Tian
- [PATCH 4/4] clk: k210: Try harder to get the best config
Sean Anderson
- [PATCH 4/4] configs: ls2080ardb.h: Update mc size in env
Priyanka Jain
- [PATCH 4/4] configs: sam9x60ek: enable CONFIG_CPU
Claudiu Beznea
- [PATCH 4/4] fit: Use DM hash driver if supported
Chia-Wei Wang
- [PATCH 4/4] imx8mq_evk: Enable the USB3.0 host port
Patrick Wildt
- [PATCH 4/4] mmc: arm_pl180_mmci: Add configuration for ST-Ericsson Ux500v2
Stephan Gerhold
- [PATCH 4/4] mmc: arm_pl180_mmci: Add configuration for ST-Ericsson Ux500v2
Patrice CHOTARD
- [PATCH 4/4] mmc: arm_pl180_mmci: Add configuration for ST-Ericsson Ux500v2
Jaehoon Chung
- [PATCH 4/4] NSA310S : Add DM SATA configs
Tony Dinh
- [PATCH 4/4] NSA310S : Add DM SATA configs
Stefan Roese
- [PATCH 4/4] usb: f_mass_storage: Stop after the host deconfigures us
Sean Anderson
- [PATCH 4/4] xilinx: zynqmp: Add support for runtime dfu_alt_info setup
Michal Simek
- [PATCH 4/4] xilinx: zynqmp: Enable CMD_RTC command with Zynqmp RTC driver
Michal Simek
- [PATCH 4/5] arm: dts: k3-j721e-r5: Remove MAIN R5FSS0 cluster from SPL
Suman Anna
- [PATCH 4/5] arm: mvebu: axp: Set CONFIG_SYS_TCLK globally
Pali Rohár
- [PATCH 4/5] board: gateworks: venice: add ftd_file env vars on boot
Tim Harvey
- [PATCH 4/5] board: gateworks: venice: add ftd_file env vars on boot
sbabic at denx.de
- [PATCH 4/5] configs: meson64_android: reboot to fastbootd from bootloader
Mattijs Korpershoek
- [PATCH 4/5] doc: Fix up outdated moveconfig docs
Simon Glass
- [PATCH 4/5] doc: st: stm32mp1: Add FIP support for trusted boot
Patrick Delaunay
- [PATCH 4/5] doc: st: stm32mp1: Add FIP support for trusted boot
Patrice CHOTARD
- [PATCH 4/5] efi_loader: add ExitBootServices() measurement
Masahisa Kojima
- [PATCH 4/5] efi_loader: add ExitBootServices() measurement
Heinrich Schuchardt
- [PATCH 4/5] efi_loader: add ExitBootServices() measurement
Masahisa Kojima
- [PATCH 4/5] Kconfig: FIT_SIGNATURE should not select RSA_VERIFY
Alexandru Gagniuc
- [PATCH 4/5] Kconfig: FIT_SIGNATURE should not select RSA_VERIFY
Patrick DELAUNAY
- [PATCH 4/5] m68k: Remove M54451EVB board
Tom Rini
- [PATCH 4/5] m68k: Remove M54451EVB board
Tom Rini
- [PATCH 4/6] binman: Use bytearray instead of string
Simon Glass
- [PATCH 4/6] binman: Use bytearray instead of string
Simon Glass
- [PATCH 4/6] board: sifive: Add an interface to get PCB revision
Leo Liang
- [PATCH 4/6] configs: meson64_android: use boot part label instead of index
Mattijs Korpershoek
- [PATCH 4/6] configs: meson64_android: use boot part label instead of index
Neil Armstrong
- [PATCH 4/6] configs: synquacer: Remove mtdparts settings and update DFU setting
Masami Hiramatsu
- [PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary
Frieder Schrempf
- [PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary
Marek Vasut
- [PATCH 4/6] MIPS: malta: add DT bindings for PCI host controller
Daniel Schwierzeck
- [PATCH 4/6] mmc: zynq_sdhci: Split set_tapdelay function to in and out
Ashok Reddy Soma
- [PATCH 4/6] pci: uniphier: Add UniPhier PCIe controller driver
Kunihiko Hayashi
- [PATCH 4/6] pci: uniphier: Add UniPhier PCIe controller driver
Tom Rini
- [PATCH 4/7] mmc: zynq_sdhci: Move setting tapdelay code to driver
Ashok Reddy Soma
- [PATCH 4/7] mmc: zynq_sdhci: Move setting tapdelay code to driver
Jaehoon Chung
- [PATCH 4/7] stm32mp: cmd_stm32key: lock of PKH OTP after fuse
Patrice CHOTARD
- [PATCH 4/7] stm32mp: cmd_stm32key: lock of PKH OTP after fuse
Patrick DELAUNAY
- [PATCH 4/7] x86: mtrr: Abort if requested size is not power of 2
Bin Meng
- [PATCH 4/8] board: colibri-imx8x: update building documentation
Oleksandr Suvorov
- [PATCH 4/8] dtoc: Correct the re_compat regular expression
Simon Glass
- [PATCH 4/8] dtoc: Correct the re_compat regular expression
Walter Lozano
- [PATCH 4/8] dtoc: Correct the re_compat regular expression
Simon Glass
- [PATCH 4/8] usb: ehci-mx6: add IMX8MM and IMX8MN OTG support
Fabio Estevam
- [PATCH 4/9] arm: dts: imx8mm-venice-gw7901: use common u-boot dtsi
Tim Harvey
- [PATCH 4/9] board: phytec: phycore_imx8mp: Change debug UART
Teresa Remmet
- [PATCH 4/9] net: add set_promisc function to enable/disable Promiscuous mode
Tim Harvey
- [PATCH 4/9] net: add set_promisc function to enable/disable Promiscuous mode
Ramon Fried
- [PATCH 4/9] net: add set_promisc function to enable/disable Promiscuous mode
sbabic at denx.de
- [PATCH 4/9] sandbox: tpm: Correct handling of get-capability
Simon Glass
- [PATCH 4/9] sandbox: tpm: Correct handling of get-capability
Ilias Apalodimas
- [PATCH 5/5] arm: kirkwood: Do not overwrite CONFIG_SYS_TCLK
Pali Rohár
- [PATCH 5/5] board: gateworks: venice: remove forced enable of GSC thermal protection
Tim Harvey
- [PATCH 5/5] board: gateworks: venice: remove forced enable of GSC thermal protection
sbabic at denx.de
- [PATCH 5/5] configs: j721e_evm_r5: Disable K3 R5F remoteproc
Suman Anna
- [PATCH 5/5] configs: sei610/sei510: set CONFIG_CMD_BCB=y
Mattijs Korpershoek
- [PATCH 5/5] efi_loader: refactor efi_append_scrtm_version()
Masahisa Kojima
- [PATCH 5/5] efi_loader: refactor efi_append_scrtm_version()
Heinrich Schuchardt
- [PATCH 5/5] efi_loader: refactor efi_append_scrtm_version()
Masahisa Kojima
- [PATCH 5/5] m68k: Remove M52277EVB board
Tom Rini
- [PATCH 5/5] m68k: Remove M52277EVB board
Tom Rini
- [PATCH 5/5] moveconfig: Update to newer kconfiglib
Simon Glass
- [PATCH 5/5] stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP
Patrick Delaunay
- [PATCH 5/5] stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP
Patrice CHOTARD
- [PATCH 5/5] test: dm: Add test for ECDSA UCLASS support
Alexandru Gagniuc
- [PATCH 5/5] test: dm: Add test for ECDSA UCLASS support
Patrick DELAUNAY
- [PATCH 5/6] configs: meson64_android: use logo part label instead of index
Mattijs Korpershoek
- [PATCH 5/6] configs: meson64_android: use logo part label instead of index
Neil Armstrong
- [PATCH 5/6] configs: synquacer: Drop Ext2/4 support by default
Masami Hiramatsu
- [PATCH 5/6] configs: uniphier: Enable CONFIG_SYS_PCI_64BIT
Kunihiko Hayashi
- [PATCH 5/6] configs: uniphier: Enable CONFIG_SYS_PCI_64BIT
Tom Rini
- [PATCH 5/6] MIPS: malta: add support for PCI driver model
Daniel Schwierzeck
- [PATCH 5/6] MIPS: malta: add support for PCI driver model
Simon Glass
- [PATCH 5/6] MIPS: malta: add support for PCI driver model
Daniel Schwierzeck
- [PATCH 5/6] MIPS: malta: add support for PCI driver model
Simon Glass
- [PATCH 5/6] mmc: zynq_sdhci: Fix kernel doc warnings
Ashok Reddy Soma
- [PATCH 5/6] mmc: zynq_sdhci: Fix kernel doc warnings
Jaehoon Chung
- [PATCH 5/6] mmc: zynq_sdhci: Fix kernel doc warnings
Ashok Reddy Soma
- [PATCH 5/6] patman: Use bytearray instead of string
Simon Glass
- [PATCH 5/6] patman: Use bytearray instead of string
Simon Glass
- [PATCH 5/6] riscv: dts: add dts for unmatched rev1
Leo Liang
- [PATCH 5/7] mmc: zynq_sdhci: Change variable deviceid to node_id
Ashok Reddy Soma
- [PATCH 5/7] mmc: zynq_sdhci: Change variable deviceid to node_id
Jaehoon Chung
- [PATCH 5/7] stm32mp: cmd_stm32key: add get_misc_dev function
Patrice CHOTARD
- [PATCH 5/7] stm32mp: cmd_stm32key: add get_misc_dev function
Hexagon Email Recovery
- [PATCH 5/7] stm32mp: cmd_stm32key: add get_misc_dev function
Patrick DELAUNAY
- [PATCH 5/7] x86: cmd: hob: Fix the command usage and help messages
Bin Meng
- [PATCH 5/8] board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL
Oleksandr Suvorov
- [PATCH 5/8] dtoc: Add a stdout check in test_normalized_name()
Simon Glass
- [PATCH 5/8] dtoc: Add a stdout check in test_normalized_name()
Simon Glass
- [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm
Fabio Estevam
- [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm
Marek Vasut
- [PATCH 5/8] usb: ehci-mx6: Allow building SDP for imx8mm
Fabio Estevam
- [PATCH 5/9] board: gateworks: venice: get mem size from dt
Tim Harvey
- [PATCH 5/9] board: phytec: phycore_imx8mp: Add fec support
Teresa Remmet
- [PATCH 5/9] board: phytec: phycore_imx8mp: Add fec support
Fabio Estevam
- [PATCH 5/9] board: phytec: phycore_imx8mp: Add fec support
Teresa Remmet
- [PATCH 5/9] net: fec: add set_promisc function
Tim Harvey
- [PATCH 5/9] net: fec: add set_promisc function
Ramon Fried
- [PATCH 5/9] net: fec: add set_promisc function
sbabic at denx.de
- [PATCH 5/9] sandbox: tpm: Finish comments for struct sandbox_tpm2
Simon Glass
- [PATCH 5/9] sandbox: tpm: Finish comments for struct sandbox_tpm2
Ilias Apalodimas
- [PATCH 6/6] ARM: dts: uniphier: Add support for Akebi96
Kunihiko Hayashi
- [PATCH 6/6] ARM: dts: uniphier: Add support for Akebi96
Tom Rini
- [PATCH 6/6] binman: Add basic support for debugging performance
Simon Glass
- [PATCH 6/6] binman: Add basic support for debugging performance
Simon Glass
- [PATCH 6/6] board: sifive: support spl multi-dtb on unmatched board
Leo Liang
- [PATCH 6/6] configs: meson64_android: don't set console bootargs
Mattijs Korpershoek
- [PATCH 6/6] configs: meson64_android: don't set console bootargs
Neil Armstrong
- [PATCH 6/6] configs: synquacer: Enable UEFI secure boot
Masami Hiramatsu
- [PATCH 6/6] MIPS: malta: enable PCI driver model
Daniel Schwierzeck
- [PATCH 6/6] mmc: zynq_sdhci: Make variables/structure static
Ashok Reddy Soma
- [PATCH 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable
Ashok Reddy Soma
- [PATCH 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable
Jaehoon Chung
- [PATCH 6/7] stm32mp: cmd_stm32key: add read OTP subcommand
Patrice CHOTARD
- [PATCH 6/7] stm32mp: cmd_stm32key: add read OTP subcommand
Hexagon Email Recovery
- [PATCH 6/7] stm32mp: cmd_stm32key: add read OTP subcommand
Patrick DELAUNAY
- [PATCH 6/7] x86: cmd: hob: Fix display of resource type for system memory
Bin Meng
- [PATCH 6/8] configs: toradex: add default rootpath
Oleksandr Suvorov
- [PATCH 6/8] configs: toradex: add default rootpath
Marek Vasut
- [PATCH 6/8] configs: toradex: add default rootpath
Oleksandr Suvorov
- [PATCH 6/8] configs: toradex: add default rootpath
Marek Vasut
- [PATCH 6/8] configs: toradex: add default rootpath
Oleksandr Suvorov
- [PATCH 6/8] configs: toradex: add default rootpath
Marek Vasut
- [PATCH 6/8] configs: toradex: add default rootpath
Oleksandr Suvorov
- [PATCH 6/8] dtoc: Detect unexpected suffix on .of_match
Simon Glass
- [PATCH 6/8] dtoc: Detect unexpected suffix on .of_match
Simon Glass
- [PATCH 6/8] imx8mm_evk: Add an entry for USB boot
Fabio Estevam
- [PATCH 6/9] board: gateworks: venice: use bus numbers vs names
Tim Harvey
- [PATCH 6/9] board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
Teresa Remmet
- [PATCH 6/9] net: dsa: enable master promisc mode if available and needed
Tim Harvey
- [PATCH 6/9] net: dsa: enable master promisc mode if available and needed
Ramon Fried
- [PATCH 6/9] net: dsa: enable master promisc mode if available and needed
sbabic at denx.de
- [PATCH 6/9] sandbox: tpm: Track whether the state is valid
Simon Glass
- [PATCH 7/7] mmc: zynq_sdhci: Use set_control_reg from sdhci.c
Ashok Reddy Soma
- [PATCH 7/7] mmc: zynq_sdhci: Use set_control_reg from sdhci.c
Jaehoon Chung
- [PATCH 7/7] stm32mp: cmd_stm32key: add subcommand close
Patrice CHOTARD
- [PATCH 7/7] stm32mp: cmd_stm32key: add subcommand close
Hexagon Email Recovery
- [PATCH 7/7] stm32mp: cmd_stm32key: add subcommand close
Patrick DELAUNAY
- [PATCH 7/7] x86: fsp: Only FSP2 has INIT_PHASE_END_FIRMWARE
Bin Meng
- [PATCH 7/8] board: colibri_vf: fix compiling warning
Oleksandr Suvorov
- [PATCH 7/8] dtoc: Detect drivers which do not parse correctly
Simon Glass
- [PATCH 7/8] dtoc: Detect drivers which do not parse correctly
Walter Lozano
- [PATCH 7/8] dtoc: Detect drivers which do not parse correctly
Simon Glass
- [PATCH 7/8] imx8mm_evk: Add Serial Download Protocol support
Fabio Estevam
- [PATCH 7/9] board: gateworks: venice: add board model/serial# to env
Tim Harvey
- [PATCH 7/9] board: phytec: phycore-imx8mp: Enable DVS1 control
Teresa Remmet
- [PATCH 7/9] net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch
Tim Harvey
- [PATCH 7/9] net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch
Ramon Fried
- [PATCH 7/9] net: add support for KSZ9477/KSZ9897/KSZ9567 GbE switch
sbabic at denx.de
- [PATCH 7/9] sandbox: tpm: Support nvdata in TPM2
Simon Glass
- [PATCH 8/8] board: apalis-tk1: launch toradex easy installer in usb recovery
Oleksandr Suvorov
- [PATCH 8/8] doc: imx8mm_evk: Add instructions for eMMC boot
Fabio Estevam
- [PATCH 8/8] dtoc: Update documentation to cover warnings in more detail
Simon Glass
- [PATCH 8/8] dtoc: Update documentation to cover warnings in more detail
Walter Lozano
- [PATCH 8/8] dtoc: Update documentation to cover warnings in more detail
Simon Glass
- [PATCH 8/8] dtoc: Update documentation to cover warnings in more detail
Simon Glass
- [PATCH 8/9] arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration
Tim Harvey
- [PATCH 8/9] arm: dts: imx8mm-venice-gw7901.dts: fix dsa switch configuration
sbabic at denx.de
- [PATCH 8/9] arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
Teresa Remmet
- [PATCH 8/9] board: gateworks: venice: add board model to dt
Tim Harvey
- [PATCH 8/9] sandbox: tpm: Support storing device state in tpm2
Simon Glass
- [PATCH 9/9] board: gateworks: venice: add imx8mm-gw7902 support
Tim Harvey
- [PATCH 9/9] board: phytec: imx8mp-phycore: Switch to binman
Teresa Remmet
- [PATCH 9/9] configs: imx8mm_venice_defconfig: add support for gbe switch
Tim Harvey
- [PATCH 9/9] configs: imx8mm_venice_defconfig: add support for gbe switch
sbabic at denx.de
- [PATCH 9/9] sandbox: tpm: Support extending a PCR multiple times
Simon Glass
- [PATCH 9/9] sandbox: tpm: Support extending a PCR multiple times
Ilias Apalodimas
- [PATCH 9/9] sandbox: tpm: Support extending a PCR multiple times
Ilias Apalodimas
- [PATCH 9/9] sandbox: tpm: Support extending a PCR multiple times
Simon Glass
- [PATCH][RFC] image: fdt: Fix DT relocation handling with multiple DRAM banks with gap
Marek Vasut
- [PATCH] acpi: Use U-Boot version for OEM_REVISION
Pali Rohár
- [PATCH] acpi: Use U-Boot version for OEM_REVISION
Simon Glass
- [PATCH] arch: cache: cp15: Add mmu_set_region_dcache_behaviour() when SYS_DCACHE_OFF is enable
Tom Rini
- [PATCH] arm/mach-imx: Fix macros in mmdc_size.c
sbabic at denx.de
- [PATCH] arm/mach-imx: Fix macros in mmdc_size.c
sbabic at denx.de
- [PATCH] arm64: dts: zynqmp: Enable USB2.0 for zc1751-xm016-dc2
Michal Simek
- [PATCH] arm64: dts: zynqmp: Enable USB2.0 for zc1751-xm016-dc2
Michal Simek
- [PATCH] arm64: rk3399: adjust vdd power layout
xiaobo
- [PATCH] arm64: rk3399: adjust vdd power layout
xiaobo
- [PATCH] arm64: rk3399: Optimize performance and cleanup
Xiaobo Tian
- [PATCH] arm64: rk3399: Optimize performance and cleanup
Peter Robinson
- [PATCH] arm64: rk3399: Optimize performance and cleanup
Xiaobo Tian
- [PATCH] arm64: Update memcpy_{from, to}io() helpers
Tom Rini
- [PATCH] arm64: Update memcpy_{from, to}io() helpers
Patrick DELAUNAY
- [PATCH] arm64: versal: Drop default definitions of CONFIG_SYS_PBSIZE
Michal Simek
- [PATCH] arm64: versal: Drop default definitions of CONFIG_SYS_PBSIZE
Michal Simek
- [PATCH] arm64: zynqmp: Enable WDT command
Michal Simek
- [PATCH] arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node
Michal Simek
- [PATCH] arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node
Michal Simek
- [PATCH] arm64: zynqmp: Print the secure boot status information in EL3
Jorge Ramirez-Ortiz
- [PATCH] arm64: zynqmp: Print the secure boot status information in EL3
Igor Opaniuk
- [PATCH] arm: armv8: Fix warning about redeclaring global functions as weak
Tom Rini
- [PATCH] ARM: at91: Add chip ID of SAMA5D29
Hari Prasath
- [PATCH] arm: bootm: Disable LMB reservation for command line and board info on arm64
Tom Rini
- [PATCH] arm: bootm: Disable LMB reservation for command line and board info on arm64
Jan Kiszka
- [PATCH] arm: bootm: Disable LMB reservation for command line and board info on arm64
Marek Vasut
- [PATCH] arm: bootm: Disable LMB reservation for command line and board info on arm64
Jan Kiszka
- [PATCH] arm: bootm: Disable LMB reservation for command line and board info on arm64
Jan Kiszka
- [PATCH] arm: dts: db410c: Add missing cd-gpios for SD card detection
Tom Rini
- [PATCH] arm: dts: k3-am65: Fix up MCU R5FSS cluster mode back to Split-mode
Suman Anna
- [PATCH] arm: dts: k3-am65: Fix up MCU R5FSS cluster mode back to Split-mode
Lokesh Vutla
- [PATCH] ARM: dts: meson: Use devicetree for SMBIOS settings for Khadas VIM boards
Artem Lapkin
- [PATCH] ARM: dts: meson: Use devicetree for SMBIOS settings for Khadas VIM boards
Neil Armstrong
- [PATCH] ARM: dts: rmobile: Disable RPC HF by default
Marek Vasut
- [PATCH] ARM: dts: rmobile: Remove multiple unused DT properties on R-Car Gen3
Marek Vasut
- [PATCH] ARM: dts: stm32: Fix AV96 eMMC pinmux
Marek Vasut
- [PATCH] ARM: dts: stm32: Fix AV96 eMMC pinmux
Patrick DELAUNAY
- [PATCH] ARM: dts: stm32: Fix AV96 eMMC pinmux
Patrick DELAUNAY
- [PATCH] arm: dts: stm32mp15: alignment with v5.13
Patrice CHOTARD
- [PATCH] arm: dts: stm32mp15: alignment with v5.14
Patrick Delaunay
- [PATCH] arm: imx: Fix spl imx romapi for imx8mn
Michael Trimarchi
- [PATCH] ARM: integrator: Drop PCI support
Tom Rini
- [PATCH] arm: iproc: Add higher speed configurations
Tom Rini
- [PATCH] arm: mach-k3: am642_init: Add missing ddr guard
Lokesh Vutla
- [PATCH] arm: mach-snapdragon: pinctrl: Place pin_name in .data section
Stephan Gerhold
- [PATCH] arm: mach-snapdragon: pinctrl: Place pin_name in .data section
Ramon Fried
- [PATCH] arm: mach-snapdragon: pinctrl: Place pin_name in .data section
Tom Rini
- [PATCH] arm: mach-snapdragon: pinctrl: Place pin_name in .data section
Jorge Ramirez-Ortiz, Gmail
- [PATCH] arm: mach-snapdragon: pinctrl: Place pin_name in .data section
Jorge Ramirez-Ortiz, Gmail
- [PATCH] arm: mediatek: merge board Kconfigs into mach-mediatek
Guillaume La Roque
- [PATCH] arm: mediatek: merge board Kconfigs into mach-mediatek
Tom Rini
- [PATCH] arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions
Pali Rohár
- [PATCH] arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions
Stefan Roese
- [PATCH] arm: mvebu: sata_mv failed to identify HDDs during cold start
Tony Dinh
- [PATCH] arm: mvebu: sata_mv failed to identify HDDs during cold start
Stefan Roese
- [PATCH] arm: mvebu: sata_mv failed to identify HDDs during cold start
Tony Dinh
- [PATCH] arm: omap4: Disable USB_TTY and related options
Tom Rini
- [PATCH] arm: omap4: Disable USB_TTY and related options
Lokesh Vutla
- [PATCH] ARM: renesas: Set CONFIG_SYS_TEXT_BASE=0x0 on R-Car Gen3
Marek Vasut
- [PATCH] ARM: rmobile: Align CPU: print with other prints
Marek Vasut
- [PATCH] ARM: rmobile: Remove default bootargs
Marek Vasut
- [PATCH] arm: stm32mp1: force boot_device variable for invalid TAMP register value
Patrick Delaunay
- [PATCH] arm: stm32mp1: force boot_device variable for invalid TAMP register value
Patrice CHOTARD
- [PATCH] arm: stm32mp1: force boot_device variable for invalid TAMP register value
Patrick DELAUNAY
- [PATCH] arm: stm32mp1: force boot_device variable for invalid TAMP register value
Patrick DELAUNAY
- [PATCH] arm: vexpress64: juno: Enable distro_bootcmd functionality
Andre Przywara
- [PATCH] arm: vexpress64: juno: Enable distro_bootcmd functionality
Simon Glass
- [PATCH] arm: vexpress64: juno: Enable distro_bootcmd functionality
Linus Walleij
- [PATCH] arm: vexpress64: juno: Enable distro_bootcmd functionality
Tom Rini
- [PATCH] armv8: fsl : create bootcmd and mcinitcmd as per boot source
Wasim Khan
- [PATCH] armv8: fsl : create bootcmd and mcinitcmd as per boot source
Priyanka Jain
- [PATCH] armv8: fsl : create bootcmd and mcinitcmd as per boot source
Priyanka Jain
- [PATCH] armv8: fsl : fix bootcmd and mcinitcmd default value
Wasim Khan
- [PATCH] armv8: Initialize CNTFRQ if at highest exception level
Peter Hoyes
- [PATCH] armv8: Initialize CNTFRQ if at highest exception level
Tom Rini
- [PATCH] autoboot: fix MENUKEY
Da Xue
- [PATCH] autoboot: fix MENUKEY
Tom Rini
- [PATCH] autoboot: fix typos of CONFIG_AUTOBOOT_USE_MENUKEY
Da Xue
- [PATCH] autoboot: fix typos of CONFIG_AUTOBOOT_USE_MENUKEY
Tom Rini
- [PATCH] Azure: Remove "spear" jobs
Tom Rini
- [PATCH] Azure: Remove "spear" jobs
Bin Meng
- [PATCH] Azure: Remove "spear" jobs
Tom Rini
- [PATCH] binman: Show an error if __image_copy_start is missing
Simon Glass
- [PATCH] board: amlogic: vim3: fix phy-names property setup
Artem Lapkin
- [PATCH] board: amlogic: vim3: fix phy-names property setup
Neil Armstrong
- [PATCH] board: amlogic: vim3: fix phy-names property setup
Neil Armstrong
- [PATCH] board: armltd: Remove bootargs from Total Compute configuration
Tom Rini
- [PATCH] board: dragonboard410c: Load U-Boot directly without LK
Stephan Gerhold
- [PATCH] board: dragonboard410c: Load U-Boot directly without LK
Ramon Fried
- [PATCH] board: dragonboard410c: Load U-Boot directly without LK
Stephan Gerhold
- [PATCH] board: dragonboard410c: Load U-Boot directly without LK
Tom Rini
- [PATCH] board: freescale: t208xrdb: enable Power-On Reset for rev D boards
Camelia Groza
- [PATCH] board: fsl_validate: Fix resource leak issue
Kshitiz Varshney
- [PATCH] board: fsl_validate: Fix resource leak issue
Kshitiz Varshney
- [PATCH] board: sifive: drop stuff related to unmatched revision 1
Zong Li
- [PATCH] board: sifive: drop stuff related to unmatched revision 1
Leo Liang
- [PATCH] board: sifive: drop stuff related to unmatched revision 1
Leo Liang
- [PATCH] board: sifive: drop stuff related to unmatched revision 1
Bin Meng
- [PATCH] board: sifive: drop stuff related to unmatched revision 1
David Abdurachmanov
- [PATCH] board: sifive: drop stuff related to unmatched revision 1
Zong Li
- [PATCH] board: sifive: remove the command for setting serial number
Zong Li
- [PATCH] board: sifive: remove the command for setting serial number
Leo Liang
- [PATCH] board: sl28: drop unneeded and outdated flash partitions
Michael Walle
- [PATCH] board: ti: j721e: README: Add documentation for eMMC boot
Tom Rini
- [PATCH] board: ti: k2g: Program PadConfig_202 before locking RSTMUX8
Suman Anna
- [PATCH] board: ti: k2g: Program PadConfig_202 before locking RSTMUX8
Lokesh Vutla
- [PATCH] build: remove the variable NM in gen_ll_addressable_symbols.sh
Patrick Delaunay
- [PATCH] build: remove the variable NM in gen_ll_addressable_symbols.sh
Simon Glass
- [PATCH] build: remove the variable NM in gen_ll_addressable_symbols.sh
Patrick DELAUNAY
- [PATCH] CI: Update to LLVM-12
Tom Rini
- [PATCH] clk: stm32mp1: add support of BSEC clock
Patrick Delaunay
- [PATCH] clk: stm32mp1: add support of missing SPI clocks
Patrick Delaunay
- [PATCH] clk: stm32mp1: add support of missing SPI clocks
Patrick DELAUNAY
- [PATCH] clk: zynqmp: Add support for enabling clock on lpd_lsbus
Michal Simek
- [PATCH] clk: zynqmp: Add support for enabling clock on lpd_lsbus
Michal Simek
- [PATCH] cmd: part: Correct error handling
Tom Rini
- [PATCH] cmd: ubi: add a command to swap volumes
Ayoub Zaki
- [PATCH] cmd: ums: Enable by default for sunxi
Andre Przywara
- [PATCH] cmd: ums: Enable by default for sunxi
Jagan Teki
- [PATCH] cmd: ums: Enable by default for sunxi
Andre Przywara
- [PATCH] cmd: ums: Enable by default for sunxi
Maxime Ripard
- [PATCH] cmd: ums: Enable by default for sunxi
Sean Anderson
- [PATCH] command: Fix SMC and HVC maximum number of arguments
Siew Chin Lim
- [PATCH] command: Fix SMC and HVC maximum number of arguments
Simon Glass
- [PATCH] command: Fix SMC and HVC maximum number of arguments
Tom Rini
- [PATCH] common: board_r: print error if binman_init fails
Tim Harvey
- [PATCH] common: board_r: print error if binman_init fails
Simon Glass
- [PATCH] common: board_r: print error if binman_init fails
Simon Glass
- [PATCH] configs: am3517_evm: Fix boot hang
Lokesh Vutla
- [PATCH] configs: am64x_evm_r5_defconfig: Fix CONFIG_SPL_TEXT_BASE to 0x70000000
Aswath Govindraju
- [PATCH] configs: am64x_evm_r5_defconfig: Fix CONFIG_SPL_TEXT_BASE to 0x70000000
Lokesh Vutla
- [PATCH] configs: am65x_evm: Switch envboot out for distro_bootcmd
Tom Rini
- [PATCH] configs: am65x_evm: Switch envboot out for distro_bootcmd
Lokesh Vutla
- [PATCH] configs: am65x_evm: Switch envboot out for distro_bootcmd
Tom Rini
- [PATCH] configs: Enable SMBIOS for Khadas VIM boards
Artem Lapkin
- [PATCH] configs: Enable SMBIOS for Khadas VIM boards
Neil Armstrong
- [PATCH] configs: j721e_evm: Switch envboot out for distro_bootcmd
Tom Rini
- [PATCH] configs: j721e_evm: Switch envboot out for distro_bootcmd
Lokesh Vutla
- [PATCH] configs: khadas-edge series: Enable SMBIOS
Artem Lapkin
- [PATCH] configs: khadas-edge series: Enable SMBIOS
Simon Glass
- [PATCH] configs: khadas-vim*: Enable SMBIOS
Artem Lapkin
- [PATCH] configs: khadas-vim*: Enable SMBIOS
Neil Armstrong
- [PATCH] configs: khadas-vim*: Enable SMBIOS
Art Nikpal
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Zhiqiang Hou
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Tom Rini
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Michael Walle
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Tom Rini
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Michael Walle
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Fabio Estevam
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Tom Rini
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Z.Q. Hou
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Michael Walle
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Z.Q. Hou
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Z.Q. Hou
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Michael Walle
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Z.Q. Hou
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Tom Rini
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Tom Rini
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Z.Q. Hou
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Tom Rini
- [PATCH] configs: layerscape: Disable the EFI_LOADER feature
Z.Q. Hou
- [PATCH] configs: libretech: set SPI mode to 0
Da Xue
- [PATCH] configs: libretech: set SPI mode to 0
Neil Armstrong
- [PATCH] configs: libretech: set SPI mode to 0
Marek Vasut
- [PATCH] configs: libretech: set SPI mode to 0
Tom Rini
- [PATCH] configs: ls1043aqds: Configure environment related configs
Kuldeep Singh
- [PATCH] configs: omap3x_logic: Enable LTO on more LogicPD OMAP3 boards
Lokesh Vutla
- [PATCH] configs: omap3x_logic: Fix boot hang by reducing SYS_MALLOC_F_LEN
Lokesh Vutla
- [PATCH] configs: stm32mp1: activate command rng
Patrice CHOTARD
- [PATCH] configs: stm32mp1: activate command rng
Patrick DELAUNAY
- [PATCH] configs: stm32mp1: remove splashimage and add fdtoverlay_addr_r
Patrice CHOTARD
- [PATCH] configs: stm32mp1: remove splashimage and add fdtoverlay_addr_r
Hexagon Email Recovery
- [PATCH] configs: stm32mp1: remove splashimage and add fdtoverlay_addr_r
Patrick DELAUNAY
- [PATCH] Disable timer check in file loading
Michael Chang
- [PATCH] Disable timer check in file loading
Heinrich Schuchardt
- [PATCH] Disable timer check in file loading
Michael Chang
- [PATCH] distro_boot: Fix block device after DHCP boot sequence
Andre Przywara
- [PATCH] distro_boot: Fix block device after DHCP boot sequence
Simon Glass
- [PATCH] distro_boot: Fix block device after DHCP boot sequence
Tom Rini
- [PATCH] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
Simon Glass
- [PATCH] dm: define LOG_CATEGORY for all uclass
Simon Glass
- [PATCH] dm: migrate the dm_warn to use the log macro
Patrick Delaunay
- [PATCH] dm: migrate the dm_warn to use the log macro
Simon Glass
- [PATCH] dm: usb: add hook for low level usb init
Simon-Pierre Allaire
- [PATCH] dm: usb: add hook for low level usb init
Simon Glass
- [PATCH] doc: Add basic information about running CI tests
Tom Rini
- [PATCH] doc: Bring in Makefile documentation
Simon Glass
- [PATCH] doc: Bring in Makefile documentation
Heinrich Schuchardt
- [PATCH] doc: fix typo in signature.txt
Thomas Perrot
- [PATCH] doc: fix typo in signature.txt
Heinrich Schuchardt
- [PATCH] Docker/CI: Update to "focal" and latest build
Tom Rini
- [PATCH] drivers: net: aquantia: fix unsigned compared against 0
Cosmin-Florin Aluchenesei
- [PATCH] drivers: net: aquantia: fix unsigned compared against 0
Ramon Fried
- [PATCH] drivers: net: aquantia: fix unsigned compared against 0
Ramon Fried
- [PATCH] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART
Tim Harvey
- [PATCH] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART
Teresa Remmet
- [PATCH] dtoc: Check that a parent is not missing
Simon Glass
- [PATCH] dtoc: Check that a parent is not missing
Walter Lozano
- [PATCH] dtoc: Check that a parent is not missing
Simon Glass
- [PATCH] dts: khadas Edge: Use devicetree for SMBIOS settings
Artem Lapkin
- [PATCH] dts: khadas Edge: Use devicetree for SMBIOS settings
Simon Glass
- [PATCH] dts: khadas vim series: Use devicetree for SMBIOS settings
Artem Lapkin
- [PATCH] dts: khadas vim series: Use devicetree for SMBIOS settings
Neil Armstrong
- [PATCH] dts: khadas vim series: Use devicetree for SMBIOS settings
Art Nikpal
- [PATCH] efi_loader: capsule: add a debug message in case of no key
AKASHI Takahiro
- [PATCH] efi_loader: capsule: add a debug message in case of no key
Ilias Apalodimas
- [PATCH] efi_loader: capsule: add a debug message in case of no key
AKASHI Takahiro
- [PATCH] efi_loader: capsule: add a debug message in case of no key
Ilias Apalodimas
- [PATCH] efi_loader: capsule: remove authentication data
AKASHI Takahiro
- [PATCH] efi_loader: capsule: remove authentication data
AKASHI Takahiro
- [PATCH] efi_loader: capsule: remove authentication data
AKASHI Takahiro
- [PATCH] efi_loader: capsule: remove unused guid
AKASHI Takahiro
- [PATCH] efi_loader: Fix to set bootdev_root correctly if bootdev found
Masami Hiramatsu
- [PATCH] efi_loader: Fix to set bootdev_root correctly if bootdev found
Heinrich Schuchardt
- [PATCH] efi_loader: Fix to set bootdev_root correctly if bootdev found
Ilias Apalodimas
- [PATCH] efi_loader: Fix to set bootdev_root correctly if bootdev found
Masami Hiramatsu
- [PATCH] efi_loader: move asm/setjmp.h to efi_loader.h
AKASHI Takahiro
- [PATCH] efi_loader: replace board_get_usable_ram_top by gd->ram_top
Patrick Delaunay
- [PATCH] efi_loader: replace board_get_usable_ram_top by gd->ram_top
Heinrich Schuchardt
- [PATCH] efi_loader: replace board_get_usable_ram_top by gd->ram_top
Patrick DELAUNAY
- [PATCH] efi_loader: set partition GUID in device path for SIG_TYPE_GUID
Alfonso Sánchez-Beato
- [PATCH] efi_loader: set partition GUID in device path for SIG_TYPE_GUID
Heinrich Schuchardt
- [PATCH] efi_loader: Use %pD to log device-path instead of local efi_dp_str()
Masami Hiramatsu
- [PATCH] efi_loader: Use %pD to log device-path instead of local efi_dp_str()
Heinrich Schuchardt
- [PATCH] env: efi: fix a wrong address dereference
Tom Rini
- [PATCH] env: efi: fix a wrong address dereference
Tom Rini
- [PATCH] fastboot: fix partition name truncation in environment lookup
Matthias Schiffer
- [PATCH] fastboot: fix partition name truncation in environment lookup
Sean Anderson
- [PATCH] fdtdec: fdtdec_get_aliases_highest_id: skip aliases to disabled nodes
Simon Glass
- [PATCH] firmware: xilinx: Use explicit values for all enum values
Michal Simek
- [PATCH] fit: Allow external data for FDTs
Tom Rini
- [PATCH] fit: Load DTO into temporary buffer and ignore load address
Simon Glass
- [PATCH] fit: Load DTO into temporary buffer and ignore load address
Tom Rini
- [PATCH] fixdep: remove leftover handling of IS_BUILTIN/IS_MODULE
Tom Rini
- [PATCH] get_maintainer.pl: update from Linux kernel v5.13-rc6
Trevor Woerner
- [PATCH] get_maintainer.pl: update from Linux kernel v5.13-rc6
Tom Rini
- [PATCH] get_maintainer.pl: update from Linux kernel v5.13-rc6
Tom Rini
- [PATCH] gpio: mcp230xx: Introduce new driver
Sebastian Reichel
- [PATCH] gpio: mcp230xx: Introduce new driver
Simon Glass
- [PATCH] image: android: Automatically detect more compression types
Stephan Gerhold
- [PATCH] image: android: Automatically detect more compression types
Tom Rini
- [PATCH] imx: spl: Use FIELD_GET for bitfield access
Sean Anderson
- [PATCH] imx: spl: Use FIELD_GET for bitfield access
Fabio Estevam
- [PATCH] Kconfig.boot: Make 0x0 the default SYS_TEXT_BASE for POSITION_INDEPENDENT
Tom Rini
- [PATCH] Kconfig.boot: Make 0x0 the default SYS_TEXT_BASE for POSITION_INDEPENDENT
Mark Kettenis
- [PATCH] Kconfig.boot: Make 0x0 the default SYS_TEXT_BASE for POSITION_INDEPENDENT
Tom Rini
- [PATCH] Kconfig.boot: Make 0x0 the default SYS_TEXT_BASE for POSITION_INDEPENDENT
Tom Rini
- [PATCH] kconfig / kbuild: Re-sync with Linux 4.20
Tom Rini
- [PATCH] lib/rsa: Remove support for OpenSSL < 1.1.0 and libressl < 2.7.0
Alexandru Gagniuc
- [PATCH] lib: -Wformat-truncation in rsa_engine_get_priv_key
Heinrich Schuchardt
- [PATCH] lib: -Wformat-truncation in rsa_engine_get_priv_key
Simon Glass
- [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used
Chan, Donald
- [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used
Tom Rini
- [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used
Chan, Donald
- [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used
Tom Rini
- [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used
Donald Chan
- [PATCH] lib: rsa: Extract public key from private key if keyfile argument is used
Simon Glass
- [PATCH] lib: rsa: rsa-sign: Minor bug in debug message
Chan, Donald
- [PATCH] lib: rsa: rsa-sign: Minor bug in debug message
Simon Glass
- [PATCH] lib: rsa: rsa-sign: Minor bug in debug message
Tom Rini
- [PATCH] lib: rsa: rsa-verify: Fix a typo in a debug message
Thomas Perrot
- [PATCH] lib: rsa: rsa-verify: Fix a typo in a debug message
Tom Rini
- [PATCH] lx2160a: Enable CONFIG_SPI_FLASH_MT35XU for lx2160a-rdb/qds
Kuldeep Singh
- [PATCH] MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
Ley Foon Tan
- [PATCH] MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
Sean Anderson
- [PATCH] MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
Ley Foon Tan
- [PATCH] MAINTAINERS: correct the path of UEFI docs
AKASHI Takahiro
- [PATCH] MAINTAINERS: correct the path of UEFI docs
Heinrich Schuchardt
- [PATCH] MAINTAINERS: correct the path of UEFI docs
AKASHI Takahiro
- [PATCH] Makefile: add support to build dedicated devicetree
Kory Maincent
- [PATCH] Makefile: Conditionally add defaultenv_h to envtools target
Tom Rini
- [PATCH] Makefile: Remove DM_VIDEO and DM_SPI_FLASH checks
Tom Rini
- [PATCH] Makefile: Remove DM_VIDEO and DM_SPI_FLASH checks
Tom Rini
- [PATCH] meson64: add kernel compression vars
Neil Armstrong
- [PATCH] mips: mt7688: gardena-smart-gateway: Adjust to production values
Daniel Schwierzeck
- [PATCH] misc: i2c_eeprom: Add atmel,24c01 to the list
Marek Vasut
- [PATCH] misc: i2c_eeprom: Add atmel,24c01 to the list
Heiko Schocher
- [PATCH] misc: i2c_eeprom: Add atmel,24c01 to the list
Marek Vasut
- [PATCH] misc: i2c_eeprom: Add atmel,24c01 to the list
Tom Rini
- [PATCH] mkimage: allow -l to work on block devices on Linux
Tom Rini
- [PATCH] mkimage: use environment variable MKIMAGE_SIGN_PIN to set pin for OpenSSL Engine
Marc Kleine-Budde
- [PATCH] mkimage: use environment variable MKIMAGE_SIGN_PIN to set pin for OpenSSL Engine
Tom Rini
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Aswath Govindraju
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Jaehoon Chung
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Ashok Reddy Soma
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Aswath Govindraju
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Aswath Govindraju
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Ashok Reddy Soma
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Jaehoon Chung
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Aswath Govindraju
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Jaehoon Chung
- [PATCH] mmc: Add support for enumerating MMC card in a given mode using mmc command
Aswath Govindraju
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Aswath Govindraju
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Jaehoon Chung
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Lokesh Vutla
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Jaehoon Chung
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Lokesh Vutla
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Jaehoon Chung
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Tom Rini
- [PATCH] mmc: sdhci: Write to HOST_CONTROL2 register for HS400 speed mode
Lokesh Vutla
- [PATCH] mpc8379erdb: enable DM_USB DM_PCI DM_ETH
Tom Rini
- [PATCH] mtd: nand: Fix typo in MXC Kconfig symbol description
li.haolin at qq.com
- [PATCH] mtd: nand: Fix typo in MXC Kconfig symbol description
Michal Simek
- [PATCH] mux: correct prototype for mux_control_try_select()
Patrick Wildt
- [PATCH] mux: correct prototype for mux_control_try_select()
Pratyush Yadav
- [PATCH] mux: correct prototype for mux_control_try_select()
Tom Rini
- [PATCH] mx6sabresd: Make checkboard respect CONFIG_NXP_BOARD_REVISION
sbabic at denx.de
- [PATCH] mx7dsabresd: Select CONFIG_IMX_HAB
Fabio Estevam
- [PATCH] net: designware: improve ethernet DMA reset
Artem Lapkin
- [PATCH] net: designware: improve ethernet DMA reset
Neil Armstrong
- [PATCH] net: dwc_eth_qos: cosmetic: remove unused define EQOS_DESCRIPTOR_ALIGN
Patrick DELAUNAY
- [PATCH] net: dwc_eth_qos: cosmetic: remove unused define EQOS_DESCRIPTOR_ALIGN
Ramon Fried
- [PATCH] net: emaclite: fix possible underflow bug
Tianrui Wei
- [PATCH] net: fsl-mc: fix logically dead code
Cosmin-Florin Aluchenesei
- [PATCH] net: fsl-mc: fix logically dead code
Ramon Fried
- [PATCH] net: fsl-mc: fix logically dead code
Ramon Fried
- [PATCH] net: remove CONFIG_NET_MULTI (again)
Michal Simek
- [PATCH] net: remove CONFIG_NET_MULTI (again)
Chris Packham
- [PATCH] net: remove CONFIG_NET_MULTI (again)
Tom Rini
- [PATCH] net: Use phys_addr_t for SMC net device addresses
Peter Hoyes
- [PATCH] net: Use phys_addr_t for SMC net device addresses
Ramon Fried
- [PATCH] net: Use phys_addr_t for SMC net device addresses
Andre Przywara
- [PATCH] net: Use phys_addr_t for SMC net device addresses
Ramon Fried
- [PATCH] Nokia RX-51: Add check for /lib/ld-linux.so.2 in test script
Lokesh Vutla
- [PATCH] Nokia RX-51: Convert documentation to rst format
Pali Rohár
- [PATCH] Nokia RX-51: Convert documentation to rst format
Lokesh Vutla
- [PATCH] Nokia RX-51: Update documentation about ext2/3/4
Pali Rohár
- [PATCH] Nokia RX-51: Update documentation about flashing
Lokesh Vutla
- [PATCH] octeontx: do not require cavium BDK node to be present
Stefan Roese
- [PATCH] patman: add warning for invalid tag
Patrick Delaunay
- [PATCH] patman: add warning for invalid tag
Simon Glass
- [PATCH] patman: Handle PAGER containing arguments
Paul Barker
- [PATCH] pci: imx: use reset-gpios if defined by device-tree
Tim Harvey
- [PATCH] pci: imx: use reset-gpios if defined by device-tree
Soeren Moch
- [PATCH] pci: imx: use reset-gpios if defined by device-tree
Tim Harvey
- [PATCH] phy: rockchip: inno-usb2: fix hang when multiple controllers exit
Grant Likely
- [PATCH] qemu-riscv64_smode: fix extlinux (define preboot)
Dimitri John Ledkov
- [PATCH] qemu-riscv64_smode: fix extlinux (define preboot)
Leo Liang
- [PATCH] qemu-riscv64_smode: fix extlinux (define preboot)
Dimitri John Ledkov
- [PATCH] remove struct uclass_driver::ops
Simon Glass
- [PATCH] reset: ast2600: Fix missing reference operator
Chia-Wei Wang
- [PATCH] reset: ast2600: Fix missing reference operator
Tom Rini
- [PATCH] reset: zynqmp: Add reset controller for ZynqMP SoC
Michal Simek
- [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
Jan Kiszka
- [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
Marek Vasut
- [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
Tom Rini
- [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
Marek Vasut
- [PATCH] Revert "arm: bootm: Disable LMB reservation for command line and board info on arm64"
Tom Rini
- [PATCH] Revert "mmc: sdhci: set to INT_DATA_END when there are data"
Andy.Wu at sony.com
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Peter Robinson
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Michal Simek
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Tom Rini
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Dennis Gilmore
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Tom Rini
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Dennis Gilmore
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Tom Rini
- [PATCH] Revert "spi: spi-uclass: Add support to manually relocate spi memory ops"
Dennis Gilmore
- [PATCH] riscv: booti: do not force relocation if force_reloc is not set
Leo Liang
- [PATCH] riscv: dts: add OpenPiton RISC-V board dts support
Tianrui Wei
- [PATCH] riscv: dts: add OpenPiton RISC-V board dts support
Leo Liang
- [PATCH] riscv: dts: add OpenPiton RISC-V board dts support
Tianrui Wei
- [PATCH] rk3399: Add basic support for helios64
Dennis Gilmore
- [PATCH] rk3399: Add basic support for helios64
Dennis Gilmore
- [PATCH] rk3399: Add basic support for helios64
Philipp Tomsich
- [PATCH] rk3399: Add basic support for helios64
Tom Rini
- [PATCH] Rname CONFIG_SPL_FIT_SHAxxx to CONFIG_SPL_SHAxxx
Chia-Wei Wang
- [PATCH] rockchip: Fix u-boot-rockchip.bin build
Johan Gunnarsson
- [PATCH] rockchip: Fix u-boot-rockchip.bin build
Simon Glass
- [PATCH] rockchip: rk3328: fix booting error for nanopi-r2s
jason416
- [PATCH] rockchip: rk3328: fix booting error for nanopi-r2s
Adam Lee
- [PATCH] rockchip: rk3328: fix booting error for nanopi-r2s
jason416
- [PATCH] rockchip: rk3399: adjust Nanopi R4S board power layout
xiaobo
- [PATCH] rockchip: rk3399: adjust Nanopi R4S board power layout
xiaobo
- [PATCH] rtc: m41t62: fix wrong register use for set/reset ST bit
Tom Rini
- [PATCH] sandbox: Reduce keyed autoboot delay
Simon Glass
- [PATCH] sandbox: Reduce keyed autoboot delay
Steffen Jaeckel
- [PATCH] sandbox: Support signal handling only when requested
Simon Glass
- [PATCH] sandbox: Support signal handling only when requested
Simon Glass
- [PATCH] sandbox: Support signal handling only when requested
Heinrich Schuchardt
- [PATCH] sandbox: Support signal handling only when requested
Simon Glass
- [PATCH] scripts/get_default_envs.sh: Update for thin archive support
Tom Rini
- [PATCH] serial: pl011: Enable DEBUG_UART_PL011 in SPL
Chen Baozi
- [PATCH] serial: pl011: Enable DEBUG_UART_PL011 in SPL
Simon Glass
- [PATCH] serial: pl011: Resend the character if FIFO is full in debug uart
Chen Baozi
- [PATCH] serial: pl011: Resend the character if FIFO is full in debug uart
Stefan Roese
- [PATCH] serial: serial_msm: Ensure BAM/single character mode are disabled
Tom Rini
- [PATCH] smbios: Fix calculating BIOS Release Date
Simon Glass
- [PATCH] smbios: Fix calculating BIOS Release Date
Heinrich Schuchardt
- [PATCH] smbios: Fix calculating BIOS Release Date
Pali Rohár
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Ilias Apalodimas
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Bin Meng
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Heinrich Schuchardt
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Ilias Apalodimas
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Simon Glass
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Ilias Apalodimas
- [PATCH] smbios: Try CONFIG_SYS_ options before using "Unknow" as a value
Simon Glass
- [PATCH] spi: fix xilinx-spi lockup when fifo-size undefined in dtree
Pauli Oikkonen
- [PATCH] spi: mxc_spi: fix warnings if CLK_ENABLED not set
Stefano Babic
- [PATCH] spi: mxc_spi: fix warnings if CLK_ENABLED not set
Frieder Schrempf
- [PATCH] spi: nxp_fspi: Ensure width is respected in spi-mem operations
Michael Walle
- [PATCH] spi: nxp_fspi: Ensure width is respected in spi-mem operations
Pratyush Yadav
- [PATCH] spi: spi-mem-nodm: Fix read data size issue
Bin Meng
- [PATCH] spi: spi-mem-nodm: Fix read data size issue
Pratyush Yadav
- [PATCH] spi: spi-mem-nodm: Fix read data size issue
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Bin Meng
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Reuben Dowle
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Bin Meng
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Alex G.
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Simon Glass
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Bin Meng
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Bin Meng
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Simon Glass
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Marek Vasut
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Alex G
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Alex G
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Bin Meng
- [PATCH] spl: Align device tree blob address at 8-byte boundary
Tom Rini
- [PATCH] spl: fit: Also record architecture in /fit-images
Tom Rini
- [PATCH] spl: use CONFIG_IS_ENABLED(LOAD_FIT_FULL)
Tom Rini
- [PATCH] stm32mp1: add pull-up for gpio button PA13 and PA14
Patrick Delaunay
- [PATCH] stm32mp1: add pull-up for gpio button PA13 and PA14
Patrice CHOTARD
- [PATCH] stm32mp1: add pull-up for gpio button PA13 and PA14
Patrick DELAUNAY
- [PATCH] stm32mp: correctly handle board_get_usable_ram_top(0)
Patrick Delaunay
- [PATCH] stm32mp: stm32prog: fix the content of short help message
Hexagon Email Recovery
- [PATCH] stm32mp: stm32prog: fix the content of short help message
Patrick DELAUNAY
- [PATCH] stm32mp: stm32prog: use defines for virtual partition size
Patrick Delaunay
- [PATCH] stm32mp: stm32prog: use defines for virtual partition size
Patrice CHOTARD
- [PATCH] stm32mp: stm32prog: use defines for virtual partition size
Patrick DELAUNAY
- [PATCH] sunxi: h3: enable clock support for r_pio gpios
Manuel Dipolt
- [PATCH] sunxi: Load sun8i secure monitor to SRAM A2
Andre Przywara
- [PATCH] sunxi: Load sun8i secure monitor to SRAM A2
Andre Przywara
- [PATCH] sunxi: Load sun8i secure monitor to SRAM A2
Samuel Holland
- [PATCH] sysinfo: rcar3: Add Renesas R-Car Gen3 sysinfo driver
Marek Vasut
- [PATCH] sysinfo: rcar3: Add Renesas R-Car Gen3 sysinfo driver
Simon Glass
- [PATCH] test/py: efi_capsule: aligned with efidebug syntax changes
AKASHI Takahiro
- [PATCH] test/py: Improve check for mksquashfs version
Marek Behún
- [PATCH] test/py: Improve check for mksquashfs version
Simon Glass
- [PATCH] test/py: Improve check for mksquashfs version
João Marcos Costa
- [PATCH] test/py: Improve check for mksquashfs version
Tom Rini
- [PATCH] test/py: tpm2: Skip tpm pytest based on env variable
T Karthik Reddy
- [PATCH] test/py: tpm2: Skip tpm pytest based on env variable
Ashok Reddy Soma
- [PATCH] ti: am335x_evm: Switch to DISTRO_BOOT only
Lokesh Vutla
- [PATCH] timer: nomadik-mtu: Use dev_read_addr_ptr()
Stephan Gerhold
- [PATCH] timer: nomadik-mtu: Use dev_read_addr_ptr()
Linus Walleij
- [PATCH] timer: nomadik-mtu: Use dev_read_addr_ptr()
Tom Rini
- [PATCH] tools/fitimage: add missing linebreak for some messages
Tom Rini
- [PATCH] tools: Fix default target compile tools in Python tools
Simon Glass
- [PATCH] video: Add simple driver for ST-Ericsson MCDE with pre-configured display
Stephan Gerhold
- [PATCH] video: Add simple driver for ST-Ericsson MCDE with pre-configured display
Linus Walleij
- [PATCH] video: Hitachi panel: Drop bogus dependency on CONFIG_VIDEO
Andre Przywara
- [PATCH] warp: Use the correct symbol for CONFIG_IMX_HAB
Fabio Estevam
- [PATCH] watchdog: cadence: Add expire_now method
Michal Simek
- [PATCH] x86: crownbay: Adjust VGA rom address
Bin Meng
- [PATCH] x86: crownbay: Adjust VGA rom address
Simon Glass
- [PATCH] x86: crownbay: Adjust VGA rom address
Bin Meng
- [PATCH] x86: Drop _X86EMU_env definition when CONFIG_BIOSEMU is used
Bin Meng
- [PATCH] x86: Drop _X86EMU_env definition when CONFIG_BIOSEMU is used
Tom Rini
- [PATCH] x86: Drop _X86EMU_env definition when CONFIG_BIOSEMU is used
Simon Glass
- [PATCH] x86: Drop _X86EMU_env definition when CONFIG_BIOSEMU is used
Bin Meng
- [PATCH] x86: dts: Add "m25p,fast-read" to SPI flash node
Bin Meng
- [PATCH] x86: dts: Add "m25p,fast-read" to SPI flash node
Simon Glass
- [PATCH] x86: dts: Add "m25p,fast-read" to SPI flash node
Bin Meng
- [PATCH] x86: Ensure the e820 map is installed in all cases
Simon Glass
- [PATCH] x86: Ensure the e820 map is installed in all cases
Bin Meng
- [PATCH] x86: Ensure the e820 map is installed in all cases
Bin Meng
- [PATCH] x86: kconfig: Drop ROM_NEEDS_BLOBS and BUILD_ROM
Bin Meng
- [PATCH] x86: kconfig: Drop ROM_NEEDS_BLOBS and BUILD_ROM
Simon Glass
- [PATCH] x86: kconfig: Drop ROM_NEEDS_BLOBS and BUILD_ROM
Bin Meng
- [PATCH] xilinx: Define kernel_comp_addr_r, kernel_comp_size env variables
Michal Simek
- [PATCH] xilinx: Define kernel_comp_addr_r, kernel_comp_size env variables
Michal Simek
- [PATCH] xilinx: zynq, zynqmp: Return ENVL_NOWHERE instead of ENVL_UNKNOWN
Mike Looijmans
- [PATCH] xilinx: zynq, zynqmp: Return ENVL_NOWHERE instead of ENVL_UNKNOWN
Michal Simek
- [PATCH] xilinx: zynqmp: Add support for 67dr silicon
Michal Simek
- [PATCH] xilinx: zynqmp: Free allocated field for target variable
Michal Simek
- [PATCH] xilinx: zynqmp: increase CONFIG_SYS_SPL_MALLOC_SIZE to 16MB
Ricardo Salveti
- [PATCH] xilinx: zynqmp: increase CONFIG_SYS_SPL_MALLOC_SIZE to 16MB
Michal Simek
- [PATCH] xilinx: zynqmp: Reset usb and scsi via preboot
Michal Simek
- [PATCH] zynqmp: restore the jtag interface
Jorge Ramirez-Ortiz
- [PATCH RESEND u-boot-spi 0/8] Fix `mtd erase` when used with mtdpart
Marek Behún
- [PATCH RESEND u-boot-spi 0/8] Fix `mtd erase` when used with mtdpart
Simon Glass
- [PATCH RESEND u-boot-spi 0/8] Fix `mtd erase` when used with mtdpart
Jagan Teki
- [PATCH RESEND u-boot-spi 0/8] Fix `mtd erase` when used with mtdpart
Marek Behun
- [PATCH RESEND u-boot-spi 0/8] Fix `mtd erase` when used with mtdpart
Tom Rini
- [PATCH RESEND u-boot-spi 0/8] Fix `mtd erase` when used with mtdpart
Marek Behun
- [PATCH RESEND u-boot-spi 1/8] mtd: spi-nor-core: Try cleaning up in case writing BAR failed
Marek Behún
- [PATCH RESEND u-boot-spi 1/8] mtd: spi-nor-core: Try cleaning up in case writing BAR failed
Simon Glass
- [PATCH RESEND u-boot-spi 1/8] mtd: spi-nor-core: Try cleaning up in case writing BAR failed
Jagan Teki
- [PATCH RESEND u-boot-spi 2/8] mtd: spi-nor-core: Check return value of write_enable() in spi_nor_erase()
Marek Behún
- [PATCH RESEND u-boot-spi 2/8] mtd: spi-nor-core: Check return value of write_enable() in spi_nor_erase()
Simon Glass
- [PATCH RESEND u-boot-spi 2/8] mtd: spi-nor-core: Check return value of write_enable() in spi_nor_erase()
Jagan Teki
- [PATCH RESEND u-boot-spi 3/8] mtd: spi-nor-core: Don't overwrite return value if it is non-zero
Marek Behún
- [PATCH RESEND u-boot-spi 3/8] mtd: spi-nor-core: Don't overwrite return value if it is non-zero
Simon Glass
- [PATCH RESEND u-boot-spi 4/8] mtd: spi-nor-core: Check return value of write_disable() in spi_nor_erase()
Marek Behún
- [PATCH RESEND u-boot-spi 4/8] mtd: spi-nor-core: Check return value of write_disable() in spi_nor_erase()
Simon Glass
- [PATCH RESEND u-boot-spi 5/8] mtd: spi-nor-core: Don't check for zero length in spi_nor_erase()
Marek Behún
- [PATCH RESEND u-boot-spi 5/8] mtd: spi-nor-core: Don't check for zero length in spi_nor_erase()
Simon Glass
- [PATCH RESEND u-boot-spi 6/8] mtd: spi-nor-core: Call mtd_erase_callback() from spi_nor_erase()
Marek Behún
- [PATCH RESEND u-boot-spi 6/8] mtd: spi-nor-core: Call mtd_erase_callback() from spi_nor_erase()
Simon Glass
- [PATCH RESEND u-boot-spi 7/8] mtd: spi-nor-core: Check for ctrlc() in spi_nor_erase()
Marek Behún
- [PATCH RESEND u-boot-spi 7/8] mtd: spi-nor-core: Check for ctrlc() in spi_nor_erase()
Simon Glass
- [PATCH RESEND u-boot-spi 8/8] mtd: mtdpart: Make mtdpart's _erase method sane
Marek Behún
- [PATCH RESEND u-boot-spi 8/8] mtd: mtdpart: Make mtdpart's _erase method sane
Simon Glass
- [PATCH u-boot-dm + u-boot-spi v4 04/10] mtd: spi-nor: allow registering multiple MTDs when DM is enabled
Masami Hiramatsu
- [PATCH u-boot-dm + u-boot-spi v4 04/10] mtd: spi-nor: allow registering multiple MTDs when DM is enabled
Marek Behún
- [PATCH u-boot-dm + u-boot-spi v4 04/10] mtd: spi-nor: allow registering multiple MTDs when DM is enabled
Tom Rini
- [PATCH u-boot-dm + u-boot-spi v4 04/10] mtd: spi-nor: allow registering multiple MTDs when DM is enabled
Masami Hiramatsu
- [PATCH u-boot-marvell 0/5] Support higher baudrates on Armada 3720 UART
Stefan Roese
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Marek Behún
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Stefan Roese
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Marek Behún
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Stefan Roese
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Marek Behún
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Baruch Siach
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Marek Behún
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Stefan Roese
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Pali Rohár
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Pali Rohár
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Stefan Roese
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Stefan Roese
- [PATCH u-boot-mvebu 00/31] kwboot / kwbimage improvements
Chris Packham
- [PATCH u-boot-mvebu 01/31] tools: kwbimage: Fix compilation without CONFIG_SYS_U_BOOT_OFFS
Marek Behún
- [PATCH u-boot-mvebu 01/31] tools: kwbimage: Fix compilation without CONFIG_SYS_U_BOOT_OFFS
Stefan Roese
- [PATCH u-boot-mvebu 02/31] tools: kwbimage: Simplify aligning and calculating checksum
Marek Behún
- [PATCH u-boot-mvebu 02/31] tools: kwbimage: Simplify aligning and calculating checksum
Stefan Roese
- [PATCH u-boot-mvebu 03/31] tools: kwbimage: Align SPI and NAND images to 256 bytes
Marek Behún
- [PATCH u-boot-mvebu 03/31] tools: kwbimage: Align SPI and NAND images to 256 bytes
Stefan Roese
- [PATCH u-boot-mvebu 04/31] tools: kwbimage: Add constant for SDIO bootfrom
Marek Behún
- [PATCH u-boot-mvebu 04/31] tools: kwbimage: Add constant for SDIO bootfrom
Stefan Roese
- [PATCH u-boot-mvebu 05/31] tools: kwbimage: Fix generation of SATA, SDIO and PCIe images
Marek Behún
- [PATCH u-boot-mvebu 05/31] tools: kwbimage: Fix generation of SATA, SDIO and PCIe images
Stefan Roese
- [PATCH u-boot-mvebu 06/31] tools: kwbimage: Don't crash when binary file name does not contain '/'
Marek Behún
- [PATCH u-boot-mvebu 06/31] tools: kwbimage: Don't crash when binary file name does not contain '/'
Stefan Roese
- [PATCH u-boot-mvebu 07/31] tools: kwbimage: Fix check for v0 extended header checksum
Marek Behún
- [PATCH u-boot-mvebu 07/31] tools: kwbimage: Fix check for v0 extended header checksum
Stefan Roese
- [PATCH u-boot-mvebu 08/31] tools: kwbimage: Validate extended headers of v1 images
Marek Behún
- [PATCH u-boot-mvebu 08/31] tools: kwbimage: Validate extended headers of v1 images
Stefan Roese
- [PATCH u-boot-mvebu 09/31] tools: kwbimage: Validate data checksum of v1 images
Marek Behún
- [PATCH u-boot-mvebu 09/31] tools: kwbimage: Validate data checksum of v1 images
Stefan Roese
- [PATCH u-boot-mvebu 1/2] ARM: dts: armada-385-turris-omnia: add `u-boot-env` NOR partition
Marek Behún
- [PATCH u-boot-mvebu 1/2] ARM: dts: armada-385-turris-omnia: add `u-boot-env` NOR partition
Stefan Roese
- [PATCH u-boot-mvebu 1/2] arm: mvebu: turris_omnia: force 40 MHz speed on SPI NOR
Marek Behún
- [PATCH u-boot-mvebu 1/2] arm: mvebu: turris_omnia: force 40 MHz speed on SPI NOR
Marek Behún
- [PATCH u-boot-mvebu 1/2] arm: mvebu: turris_omnia: force 40 MHz speed on SPI NOR
Tom Rini
- [PATCH u-boot-mvebu 1/2] arm: mvebu: turris_omnia: force 40 MHz speed on SPI NOR
Stefan Roese
- [PATCH u-boot-mvebu 1/2] arm: mvebu: turris_omnia: force 40 MHz speed on SPI NOR
Stefan Roese
- [PATCH u-boot-mvebu 10/31] tools: kwbimage: Print size of binary header in kwbimage_print_header()
Marek Behún
- [PATCH u-boot-mvebu 10/31] tools: kwbimage: Print size of binary header in kwbimage_print_header()
Stefan Roese
- [PATCH u-boot-mvebu 11/31] tools: kwboot: Fix wrong parameter passed to read()
Marek Behún
- [PATCH u-boot-mvebu 11/31] tools: kwboot: Fix wrong parameter passed to read()
Stefan Roese
- [PATCH u-boot-mvebu 12/31] tools: kwboot: Fix restoring terminal
Marek Behún
- [PATCH u-boot-mvebu 12/31] tools: kwboot: Fix restoring terminal
Stefan Roese
- [PATCH u-boot-mvebu 13/31] tools: kwboot: Print trailing newline after terminal is terminated
Marek Behún
- [PATCH u-boot-mvebu 13/31] tools: kwboot: Print trailing newline after terminal is terminated
Stefan Roese
- [PATCH u-boot-mvebu 14/31] tools: kwboot: Cosmetic fix - add missing curly brackets
Marek Behún
- [PATCH u-boot-mvebu 14/31] tools: kwboot: Cosmetic fix - add missing curly brackets
Stefan Roese
- [PATCH u-boot-mvebu 15/31] tools: kwboot: Check for v1 header size
Marek Behún
- [PATCH u-boot-mvebu 15/31] tools: kwboot: Check for v1 header size
Stefan Roese
- [PATCH u-boot-mvebu 16/31] tools: kwbimage: Cosmetic fix - remove redundant space character
Marek Behún
- [PATCH u-boot-mvebu 16/31] tools: kwbimage: Cosmetic fix - remove redundant space character
Stefan Roese
- [PATCH u-boot-mvebu 17/31] tools: kwbimage: Use -a parameter (load address) for v1 images
Marek Behún
- [PATCH u-boot-mvebu 17/31] tools: kwbimage: Use -a parameter (load address) for v1 images
Stefan Roese
- [PATCH u-boot-mvebu 18/31] arm: mvebu: Fix return_to_bootrom()
Marek Behún
- [PATCH u-boot-mvebu 18/31] arm: mvebu: Fix return_to_bootrom()
Stefan Roese
- [PATCH u-boot-mvebu 19/31] arm: mvebu: Mark return_to_bootrom() as a noreturn function
Marek Behún
- [PATCH u-boot-mvebu 19/31] arm: mvebu: Mark return_to_bootrom() as a noreturn function
Stefan Roese
- [PATCH u-boot-mvebu 2/2] arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTB
Marek Behún
- [PATCH u-boot-mvebu 2/2] arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTB
Stefan Roese
- [PATCH u-boot-mvebu 2/2] arm: mvebu: turris_{omnia, mox}: enable MTD command
Marek Behún
- [PATCH u-boot-mvebu 2/2] arm: mvebu: turris_{omnia,mox}: enable MTD command
Stefan Roese
- [PATCH u-boot-mvebu 20/31] arm: mvebu: Implement return_to_bootrom() via U-Boot's SPL framework
Marek Behún
- [PATCH u-boot-mvebu 20/31] arm: mvebu: Implement return_to_bootrom() via U-Boot's SPL framework
Stefan Roese
- [PATCH u-boot-mvebu 21/31] arm: mvebu: Use U-Boot's SPL BootROM framework for booting from NAND/UART
Marek Behún
- [PATCH u-boot-mvebu 21/31] arm: mvebu: Use U-Boot's SPL BootROM framework for booting from NAND/UART
Stefan Roese
- [PATCH u-boot-mvebu 22/31] arm: mvebu: Always use BootROM for loading the rest of U-Boot's binary
Marek Behún
- [PATCH u-boot-mvebu 22/31] arm: mvebu: Always use BootROM for loading the rest of U-Boot's binary
Baruch Siach
- [PATCH u-boot-mvebu 23/31] arm: mvebu: gdsys: Remove custom spl_board_init()
Marek Behún
- [PATCH u-boot-mvebu 24/31] arm: mvebu: Remove legacy U-Boot header from kwbimage v1 files
Marek Behún
- [PATCH u-boot-mvebu 25/31] tools: kwbimage: Remove v1 kwbimage SPL padding to CONFIG_SYS_U_BOOT_OFFS bytes
Marek Behún
- [PATCH u-boot-mvebu 25/31] tools: kwbimage: Remove v1 kwbimage SPL padding to CONFIG_SYS_U_BOOT_OFFS bytes
Chris Packham
- [PATCH u-boot-mvebu 26/31] arm: mvebu: Remove unused macro CONFIG_SYS_U_BOOT_OFFS
Marek Behún
- [PATCH u-boot-mvebu 27/31] tools: kwbimage: Add support for more BINARY headers
Marek Behún
- [PATCH u-boot-mvebu 28/31] tools: kwbimage: Don't parse PAYLOAD keyword
Marek Behún
- [PATCH u-boot-mvebu 29/31] tools: kwbimage: Add support for DATA command also for v1 images
Marek Behún
- [PATCH u-boot-mvebu 30/31] tools: kwbimage: Add support for a new DATA_DELAY command
Marek Behún
- [PATCH u-boot-mvebu 31/31] tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
Marek Behún
- [PATCH u-boot-mvebu] arm64: a37xx: pinctrl: Correct PWM pins definitions
Marek Behún
- [PATCH u-boot-mvebu] arm64: a37xx: pinctrl: Correct PWM pins definitions
Stefan Roese
- [PATCH u-boot-mvebu] arm64: a37xx: pinctrl: Correct PWM pins definitions
Stefan Roese
- [PATCH u-boot-mvebu] arm: mvebu: armada-3720: remove unused config option
Marek Behún
- [PATCH u-boot-mvebu] arm: mvebu: armada-3720: remove unused config option
Pali Rohár
- [PATCH u-boot-mvebu] arm: mvebu: armada-3720: remove unused config option
Marek Behún
- [PATCH u-boot-mvebu v2 00/41] kwboot / kwbimage improvements reducing image size
Marek Behún
- [PATCH u-boot-mvebu v2 00/41] kwboot / kwbimage improvements reducing image size
Stefan Roese
- [PATCH u-boot-mvebu v2 01/41] tools: kwbimage: Fix compilation without CONFIG_SYS_U_BOOT_OFFS
Marek Behún
- [PATCH u-boot-mvebu v2 02/41] tools: kwbimage: Simplify aligning and calculating checksum
Marek Behún
- [PATCH u-boot-mvebu v2 03/41] tools: kwbimage: Align SPI and NAND images to 256 bytes
Marek Behún
- [PATCH u-boot-mvebu v2 04/41] tools: kwbimage: Add constant for SDIO bootfrom
Marek Behún
- [PATCH u-boot-mvebu v2 05/41] tools: kwbimage: Fix generation of SATA, SDIO and PCIe images
Marek Behún
- [PATCH u-boot-mvebu v2 06/41] tools: kwbimage: Don't crash when binary file name does not contain '/'
Marek Behún
- [PATCH u-boot-mvebu v2 07/41] tools: kwbimage: Fix check for v0 extended header checksum
Marek Behún
- [PATCH u-boot-mvebu v2 08/41] tools: kwbimage: Validate extended headers of v1 images
Marek Behún
- [PATCH u-boot-mvebu v2 09/41] tools: kwbimage: Validate data checksum of v1 images
Marek Behún
- [PATCH u-boot-mvebu v2 10/41] tools: kwbimage: Print size of binary header in kwbimage_print_header()
Marek Behún
- [PATCH u-boot-mvebu v2 11/41] tools: kwbimage: Cosmetic fix - remove redundant space character
Marek Behún
- [PATCH u-boot-mvebu v2 12/41] tools: kwbimage: Use -a parameter (load address) for v1 images
Marek Behún
- [PATCH u-boot-mvebu v2 13/41] tools: kwbimage: Change maximum number of arguments in binary header to 256
Marek Behún
- [PATCH u-boot-mvebu v2 13/41] tools: kwbimage: Change maximum number of arguments in binary header to 256
Stefan Roese
- [PATCH u-boot-mvebu v2 14/41] tools: kwbimage: Fix calculating size of binary header
Marek Behún
- [PATCH u-boot-mvebu v2 14/41] tools: kwbimage: Fix calculating size of binary header
Stefan Roese
- [PATCH u-boot-mvebu v2 15/41] tools: kwbimage: Add support for more BINARY headers
Marek Behún
- [PATCH u-boot-mvebu v2 15/41] tools: kwbimage: Add support for more BINARY headers
Stefan Roese
- [PATCH u-boot-mvebu v2 16/41] tools: kwbimage: Don't parse PAYLOAD keyword
Marek Behún
- [PATCH u-boot-mvebu v2 16/41] tools: kwbimage: Don't parse PAYLOAD keyword
Stefan Roese
- [PATCH u-boot-mvebu v2 17/41] tools: kwbimage: Add support for DATA command also for v1 images
Marek Behún
- [PATCH u-boot-mvebu v2 17/41] tools: kwbimage: Add support for DATA command also for v1 images
Stefan Roese
- [PATCH u-boot-mvebu v2 18/41] tools: kwbimage: Add support for a new DATA_DELAY command
Marek Behún
- [PATCH u-boot-mvebu v2 18/41] tools: kwbimage: Add support for a new DATA_DELAY command
Stefan Roese
- [PATCH u-boot-mvebu v2 19/41] tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
Marek Behún
- [PATCH u-boot-mvebu v2 19/41] tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
Marek Behún
- [PATCH u-boot-mvebu v2 19/41] tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
Stefan Roese
- [PATCH u-boot-mvebu v2 19/41] tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
Stefan Roese
- [PATCH u-boot-mvebu v2 20/41] tools: kwbimage: Mark all BootROM structures __packed
Marek Behún
- [PATCH u-boot-mvebu v2 20/41] tools: kwbimage: Mark all BootROM structures __packed
Stefan Roese
- [PATCH u-boot-mvebu v2 21/41] tools: dumpimage: Fix crashing when trying to extract data from kwbimage
Marek Behún
- [PATCH u-boot-mvebu v2 21/41] tools: dumpimage: Fix crashing when trying to extract data from kwbimage
Stefan Roese
- [PATCH u-boot-mvebu v2 22/41] tools: dumpimage: Show error message when trying to extract data from kwbimage
Marek Behún
- [PATCH u-boot-mvebu v2 22/41] tools: dumpimage: Show error message when trying to extract data from kwbimage
Stefan Roese
- [PATCH u-boot-mvebu v2 23/41] tools: kwboot: Fix wrong parameter passed to read()
Marek Behún
- [PATCH u-boot-mvebu v2 24/41] tools: kwboot: Fix restoring terminal
Marek Behún
- [PATCH u-boot-mvebu v2 25/41] tools: kwboot: Print trailing newline after terminal is terminated
Marek Behún
- [PATCH u-boot-mvebu v2 26/41] tools: kwboot: Cosmetic fix - add missing curly brackets
Marek Behún
- [PATCH u-boot-mvebu v2 27/41] tools: kwboot: Check for v1 header size
Marek Behún
- [PATCH u-boot-mvebu v2 28/41] tools: kwboot: Fix checking image header version
Marek Behún
- [PATCH u-boot-mvebu v2 28/41] tools: kwboot: Fix checking image header version
Stefan Roese
- [PATCH u-boot-mvebu v2 29/41] arm: mvebu: Fix return_to_bootrom()
Marek Behún
- [PATCH u-boot-mvebu v2 30/41] arm: mvebu: Mark return_to_bootrom() as a noreturn function
Marek Behún
- [PATCH u-boot-mvebu v2 31/41] arm: mvebu: Implement return_to_bootrom() via U-Boot's SPL framework
Marek Behún
- [PATCH u-boot-mvebu v2 32/41] arm: mvebu: Use U-Boot's SPL BootROM framework for booting from NAND/UART
Marek Behún
- [PATCH u-boot-mvebu v2 33/41] SPL: Add support for specifying offset between header and image
Marek Behún
- [PATCH u-boot-mvebu v2 33/41] SPL: Add support for specifying offset between header and image
Stefan Roese
- [PATCH u-boot-mvebu v2 34/41] SPL: Add support for parsing board / BootROM specific image types
Marek Behún
- [PATCH u-boot-mvebu v2 34/41] SPL: Add support for parsing board / BootROM specific image types
Stefan Roese
- [PATCH u-boot-mvebu v2 35/41] arm: mvebu: Load main U-Boot binary in SPL code based on kwbimage header
Marek Behún
- [PATCH u-boot-mvebu v2 35/41] arm: mvebu: Load main U-Boot binary in SPL code based on kwbimage header
Stefan Roese
- [PATCH u-boot-mvebu v2 36/41] arm: mvebu: Remove legacy U-Boot header from kwbimage v1 files
Marek Behún
- [PATCH u-boot-mvebu v2 36/41] arm: mvebu: Remove legacy U-Boot header from kwbimage v1 files
Stefan Roese
- [PATCH u-boot-mvebu v2 37/41] tools: kwbimage: Remove v1 kwbimage SPL padding to CONFIG_SYS_U_BOOT_OFFS bytes
Marek Behún
- [PATCH u-boot-mvebu v2 37/41] tools: kwbimage: Remove v1 kwbimage SPL padding to CONFIG_SYS_U_BOOT_OFFS bytes
Stefan Roese
- [PATCH u-boot-mvebu v2 38/41] arm: mvebu: Remove unused macro CONFIG_SYS_U_BOOT_OFFS
Marek Behún
- [PATCH u-boot-mvebu v2 38/41] arm: mvebu: Remove unused macro CONFIG_SYS_U_BOOT_OFFS
Stefan Roese
- [PATCH u-boot-mvebu v2 39/41] arm: mvebu: gdsys: Remove custom spl_board_init()
Marek Behún
- [PATCH u-boot-mvebu v2 39/41] arm: mvebu: gdsys: Remove custom spl_board_init()
Stefan Roese
- [PATCH u-boot-mvebu v2 40/41] kwbimage: Add support for extracting images via dumpimage tool
Marek Behún
- [PATCH u-boot-mvebu v2 40/41] kwbimage: Add support for extracting images via dumpimage tool
Stefan Roese
- [PATCH u-boot-mvebu v2 41/41] kwbimage: Update help message about how to extract from an existing image
Marek Behún
- [PATCH u-boot-mvebu v2 41/41] kwbimage: Update help message about how to extract from an existing image
Stefan Roese
- [PATCH u-boot-mvebu v2] arm: mvebu: armada-3720: remove unused config option
Marek Behún
- [PATCH u-boot-mvebu v2] arm: mvebu: armada-3720: remove unused config option
Pali Rohár
- [PATCH u-boot-mvebu v2] arm: mvebu: armada-3720: remove unused config option
Stefan Roese
- [PATCH u-boot-mvebu v3 00/41] kwboot / kwbimage improvements reducing image size
Marek Behún
- [PATCH u-boot-mvebu v3 00/41] kwboot / kwbimage improvements reducing image size
Stefan Roese
- [PATCH u-boot-mvebu v3 01/41] tools: kwbimage: Fix compilation without CONFIG_SYS_U_BOOT_OFFS
Marek Behún
- [PATCH u-boot-mvebu v3 02/41] tools: kwbimage: Simplify aligning and calculating checksum
Marek Behún
- [PATCH u-boot-mvebu v3 03/41] tools: kwbimage: Align SPI and NAND images to 256 bytes
Marek Behún
- [PATCH u-boot-mvebu v3 04/41] tools: kwbimage: Add constant for SDIO bootfrom
Marek Behún
- [PATCH u-boot-mvebu v3 05/41] tools: kwbimage: Fix generation of SATA, SDIO and PCIe images
Marek Behún
- [PATCH u-boot-mvebu v3 06/41] tools: kwbimage: Don't crash when binary file name does not contain '/'
Marek Behún
- [PATCH u-boot-mvebu v3 07/41] tools: kwbimage: Fix check for v0 extended header checksum
Marek Behún
- [PATCH u-boot-mvebu v3 08/41] tools: kwbimage: Validate extended headers of v1 images
Marek Behún
- [PATCH u-boot-mvebu v3 09/41] tools: kwbimage: Validate data checksum of v1 images
Marek Behún
- [PATCH u-boot-mvebu v3 10/41] tools: kwbimage: Print size of binary header in kwbimage_print_header()
Marek Behún
- [PATCH u-boot-mvebu v3 11/41] tools: kwbimage: Cosmetic fix - remove redundant space character
Marek Behún
- [PATCH u-boot-mvebu v3 12/41] tools: kwbimage: Use -a parameter (load address) for v1 images
Marek Behún
- [PATCH u-boot-mvebu v3 13/41] tools: kwbimage: Change maximum number of arguments in binary header to 256
Marek Behún
- [PATCH u-boot-mvebu v3 14/41] tools: kwbimage: Fix calculating size of binary header
Marek Behún
- [PATCH u-boot-mvebu v3 15/41] tools: kwbimage: Add support for more BINARY headers
Marek Behún
- [PATCH u-boot-mvebu v3 16/41] tools: kwbimage: Don't parse PAYLOAD keyword
Marek Behún
- [PATCH u-boot-mvebu v3 17/41] tools: kwbimage: Add support for DATA command also for v1 images
Marek Behún
- [PATCH u-boot-mvebu v3 18/41] tools: kwbimage: Add support for a new DATA_DELAY command
Marek Behún
- [PATCH u-boot-mvebu v3 19/41] tools: kwbimage: Do not hide usage of secure header under CONFIG_ARMADA_38X
Marek Behún
- [PATCH u-boot-mvebu v3 20/41] tools: kwbimage: Mark all BootROM structures __packed
Marek Behún
- [PATCH u-boot-mvebu v3 21/41] tools: dumpimage: Fix crashing when trying to extract data from kwbimage
Marek Behún
- [PATCH u-boot-mvebu v3 22/41] tools: dumpimage: Show error message when trying to extract data from kwbimage
Marek Behún
- [PATCH u-boot-mvebu v3 23/41] tools: kwboot: Fix wrong parameter passed to read()
Marek Behún
- [PATCH u-boot-mvebu v3 24/41] tools: kwboot: Fix restoring terminal
Marek Behún
- [PATCH u-boot-mvebu v3 25/41] tools: kwboot: Print trailing newline after terminal is terminated
Marek Behún
- [PATCH u-boot-mvebu v3 26/41] tools: kwboot: Cosmetic fix - add missing curly brackets
Marek Behún
- [PATCH u-boot-mvebu v3 27/41] tools: kwboot: Check for v1 header size
Marek Behún
- [PATCH u-boot-mvebu v3 28/41] tools: kwboot: Fix checking image header version
Marek Behún
- [PATCH u-boot-mvebu v3 29/41] arm: mvebu: Fix return_to_bootrom()
Marek Behún
- [PATCH u-boot-mvebu v3 30/41] arm: mvebu: Mark return_to_bootrom() as a noreturn function
Marek Behún
- [PATCH u-boot-mvebu v3 31/41] arm: mvebu: Implement return_to_bootrom() via U-Boot's SPL framework
Marek Behún
- [PATCH u-boot-mvebu v3 32/41] arm: mvebu: Use U-Boot's SPL BootROM framework for booting from NAND/UART
Marek Behún
- [PATCH u-boot-mvebu v3 33/41] SPL: Add support for specifying offset between header and image
Marek Behún
- [PATCH u-boot-mvebu v3 34/41] SPL: Add support for parsing board / BootROM specific image types
Marek Behún
- [PATCH u-boot-mvebu v3 35/41] arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header
Marek Behún
- [PATCH u-boot-mvebu v3 36/41] arm: mvebu: Remove legacy U-Boot header from kwbimage v1 files
Marek Behún
- [PATCH u-boot-mvebu v3 37/41] tools: kwbimage: Remove v1 kwbimage SPL padding to CONFIG_SYS_U_BOOT_OFFS bytes
Marek Behún
- [PATCH u-boot-mvebu v3 38/41] arm: mvebu: Remove unused macro CONFIG_SYS_U_BOOT_OFFS
Marek Behún
- [PATCH u-boot-mvebu v3 39/41] arm: mvebu: gdsys: Remove custom spl_board_init()
Marek Behún
- [PATCH u-boot-mvebu v3 40/41] kwbimage: Add support for extracting images via dumpimage tool
Marek Behún
- [PATCH u-boot-mvebu v3 41/41] kwbimage: Update help message about how to extract from an existing image
Marek Behún
- [PATCH v10 12/27] mtd: spi-nor-core: Rework hwcaps selection
Bin Meng
- [PATCH v10 12/27] mtd: spi-nor-core: Rework hwcaps selection
Pratyush Yadav
- [PATCH v10 12/27] mtd: spi-nor-core: Rework hwcaps selection
Bin Meng
- [PATCH v10 2/2] mmc: openpiton: add piton_mmc driver
Jaehoon Chung
- [PATCH v1 1/1] x86: tangier: Fix DMA controller IRQ polarity in CSRT
Andy Shevchenko
- [PATCH v1 1/1] x86: tangier: Fix DMA controller IRQ polarity in CSRT
Bin Meng
- [PATCH v1 1/1] x86: tangier: Fix DMA controller IRQ polarity in CSRT
Bin Meng
- [PATCH v1 1/1] x86: tangier: Fix DMA controller IRQ polarity in CSRT
Simon Glass
- [PATCH v1 1/1] x86: tangier: Fix DMA controller IRQ polarity in CSRT
Bin Meng
- [PATCH v11 0/2] Add OpenPiton-riscv64 Board Support
Tianrui Wei
- [PATCH v11 1/2] board: riscv: add openpiton-riscv64 SoC support
Tianrui Wei
- [PATCH v11 2/2] mmc: openpiton: add piton_mmc driver
Tianrui Wei
- [PATCH V1] arm: add initial support for the Phytium Pomelo Board
nicholas_zheng at outlook.com
- [PATCH V1] arm: add initial support for the Phytium Pomelo Board
nicholas_zheng at outlook.com
- [PATCH V1] arm: add initial support for the Phytium Pomelo Board
nicholas_zheng at outlook.com
- [PATCH V1] arm: add initial support for the Phytium Pomelo Board
Peter Robinson
- [PATCH V1] arm: add initial support for the Phytium Pomelo Board
Andre Przywara
- [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen
Heiko Thiery
- [PATCH v1] imx: mkimage_fit_atf: replace @ with hyphen
Tim Harvey
- [PATCH v2 0/2] AM64: Update the locations of various elements in SRAM
Lokesh Vutla
- [PATCH v2 0/2] arm64: Update memcpy_{from, to}io() helpers
Patrick Delaunay
- [PATCH v2 0/2] arm: imx8m: add support for Advantech RSB-3720
Ying-Chun Liu
- [PATCH v2 0/2] cmd/sbi: add missing SBI information
Heinrich Schuchardt
- [PATCH v2 0/2] cmd/sbi: add missing SBI information
Leo Liang
- [PATCHv2 0/2] Introduce mcp230xx support
Sebastian Reichel
- [PATCH v2 0/3] Add MRMAC driver support
Ashok Reddy Soma
- [PATCH v2 0/3] Add support for USB on ST-Ericsson Ux500
Stephan Gerhold
- [PATCH V2 0/3] Make omap3 board functions static
Lokesh Vutla
- [PATCH v2 0/3] riscv: enable SBI system reset
Heinrich Schuchardt
- [PATCH v2 0/4] Allwinner H6 USB3 support
Andre Przywara
- [PATCH v2 0/4] Allwinner H6 USB3 support
Bin Meng
- [PATCH v2 0/4] test: Try to deal with some co-dependent tests
Simon Glass
- [PATCH v2 0/4] xilinx: zynqmp: Add support for dfu_alt_info setup at runtime
Michal Simek
- [PATCH v2 0/5] arm: dts: Add PMIC node for J7200
Lokesh Vutla
- [PATCH v2 0/5] arm: dts: Add PMIC node for J7200
Tammana, Gowtham
- [PATCH v2 0/5] arm: dts: Add PMIC node for J7200
Lokesh Vutla
- [PATCH v2 0/5] Fix compiler warnings for 32-bit ARM
Simon Glass
- [PATCH v2 0/5] meson64_android: use BCB for reboot reason
Mattijs Korpershoek
- [PATCH v2 0/5] meson64_android: use BCB for reboot reason
Neil Armstrong
- [PATCH v2 0/5] remoteproc: pru: Add remoteproc support for AM65 PRUSS
Lokesh Vutla
- [PATCH v2 0/5] Resync BeagleBone dtbs, add SanCloud BBE support & minor fixups
Paul Barker
- [PATCH v2 0/5] stm32mp1: handle TF-A boot with FIP
Patrick Delaunay
- [PATCH v2 0/6] add measurement support
Masahisa Kojima
- [PATCH v2 0/6] AM64: Add support for higher speed modes and boot mode in eMMC
Aswath Govindraju
- [PATCH v2 0/6] AM64: Add support for higher speed modes and boot mode in eMMC
Lokesh Vutla
- [PATCH v2 0/6] arm64: synquacer: DeveloperBox updates
Masami Hiramatsu
- [PATCH v2 0/6] arm64: synquacer: DeveloperBox updates
Masami Hiramatsu
- [PATCH v2 0/6] Convert MIPS Malta boards to PCI DM
Daniel Schwierzeck
- [PATCH v2 0/6] Convert MIPS Malta boards to PCI DM
Daniel Schwierzeck
- [PATCH v2 0/6] net: dwc_eth_qos: add support of device tree configuration for reset delay
Patrick DELAUNAY
- [PATCH v2 0/6] net: dwc_eth_qos: add support of device tree configuration for reset delay
Ramon Fried
- [PATCH v2 0/6] This patch set fixes minor issues related to tapdelays
Ashok Reddy Soma
- [PATCH v2 0/6] Toradex boards' specific patches
Oleksandr Suvorov
- [PATCH v2 0/8] Arasan sdhci driver updates
Ashok Reddy Soma
- [PATCH v2 0/9] efi: Various tidy-ups and drop the default
Simon Glass
- [PATCH v2 0/9] efi: Various tidy-ups and drop the default
Mark Kettenis
- [PATCH v2 0/9] efi: Various tidy-ups and drop the default
Simon Glass
- [PATCH v2 0/9] efi: Various tidy-ups and drop the default
Tom Rini
- [PATCH v2 0/9] efi: Various tidy-ups and drop the default
Simon Glass
- [PATCH v2 0/9] efi_loader: capsule: improve capsule authentication support
AKASHI Takahiro
- [PATCH v2 0/9] phyCORE-i.MX8MP Update
Teresa Remmet
- [PATCH v2 0/9] phyCORE-i.MX8MP Update
Fabio Estevam
- [PATCH v2 00/10] tpm: Enhance sandbox tpm2 emulation
Simon Glass
- [PATCH v2 00/14] aspeed: Support secure boot chain with FIT image verification
Chia-Wei Wang
- [PATCH v2 00/14] lib: Add support for a decimal 0t prefix for numbers
Simon Glass
- [PATCH V2 00/46] imx: add i.MX8ULP support
Peng Fan (OSS)
- [PATCH V2 00/46] imx: add i.MX8ULP support
Stefano Babic
- [PATCH v2 01/10] sandbox: tpm: Split out common nvdata code
Simon Glass
- [PATCH v2 01/10] sandbox: tpm: Split out common nvdata code
Simon Glass
- [PATCH v2 01/14] aspeed: ast2600: Enlarge SRAM size
Chia-Wei Wang
- [PATCH v2 01/14] board: freescale: Refactor NXP common mux code
Priyanka Jain
- [PATCH v2 01/14] hash: Ensure verification hex pairs are terminated
Simon Glass
- [PATCH v2 01/16] sandbox: net: Ensure host name is always a valid string
Tom Rini
- [PATCH v2 02/10] sandbox: tpm: Tidy up reading and writing of device state
Simon Glass
- [PATCH v2 02/10] sandbox: tpm: Tidy up reading and writing of device state
Simon Glass
- [PATCH v2 02/14] clk: ast2600: Add YCLK control for HACE
Chia-Wei Wang
- [PATCH v2 02/14] global: Convert simple_strtoul() with hex to hextoul()
Simon Glass
- [PATCH v2 02/16] video: Check return value in pwm_backlight_of_to_plat()
Tom Rini
- [PATCH v2 03/10] sandbox: tpm: Support the define-space command
Simon Glass
- [PATCH v2 03/10] sandbox: tpm: Support the define-space command
Simon Glass
- [PATCH v2 03/14] crypto: aspeed: Add AST2600 HACE support
Chia-Wei Wang
- [PATCH v2 03/14] global: Convert simple_strtoul() with decimal to dectoul()
Simon Glass
- [PATCH v2 03/16] test: Rename final check in setexpr_test_backref()
Tom Rini
- [PATCH v2 04/10] sandbox: tpm: Correct handling of get-capability
Simon Glass
- [PATCH v2 04/10] sandbox: tpm: Correct handling of get-capability
Simon Glass
- [PATCH v2 04/14] ast2600: spl: Add HACE probing
Chia-Wei Wang
- [PATCH v2 04/14] lib: Comment the base parameter with simple_strtoul/l()
Simon Glass
- [PATCH v2 04/16] tools: Avoid showing return value of clock_gettime()
Tom Rini
- [PATCH v2 05/10] sandbox: tpm: Finish comments for struct sandbox_tpm2
Simon Glass
- [PATCH v2 05/10] sandbox: tpm: Finish comments for struct sandbox_tpm2
Simon Glass
- [PATCH v2 05/14] ARM: dts: ast2600: Add HACE to device tree
Chia-Wei Wang
- [PATCH v2 05/14] lib: Drop unnecessary check for hex digit
Simon Glass
- [PATCH v2 05/16] reset: Avoid a warning in devm_reset_bulk_get_by_node()
Tom Rini
- [PATCH v2 06/10] sandbox: tpm: Track whether the state is valid
Simon Glass
- [PATCH v2 06/10] sandbox: tpm: Track whether the state is valid
Simon Glass
- [PATCH v2 06/14] common: fit: Use hash.c to call CRC/SHA function
Chia-Wei Wang
- [PATCH v2 06/14] lib: Add tests for simple_strtoull()
Simon Glass
- [PATCH v2 06/16] reset: Avoid a warning in devm_regmap_init()
Tom Rini
- [PATCH v2 07/10] sandbox: tpm: Support nvdata in TPM2
Simon Glass
- [PATCH v2 07/10] sandbox: tpm: Support nvdata in TPM2
Simon Glass
- [PATCH v2 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()
Simon Glass
- [PATCH v2 07/14] clk: ast2600: Add RSACLK control for ARCY
Chia-Wei Wang
- [PATCH v2 07/14] lib: Add octal tests for simple_strtoul/l()
Simon Glass
- [PATCH v2 08/10] sandbox: tpm: Support storing device state in tpm2
Simon Glass
- [PATCH v2 08/10] sandbox: tpm: Support storing device state in tpm2
Simon Glass
- [PATCH v2 08/14] crypto: aspeed: Add AST2600 ARCY support
Chia-Wei Wang
- [PATCH v2 08/14] lib: Move common digit-parsing code into a function
Simon Glass
- [PATCH v2 08/16] dm: core: Check uclass_get() return value when dumping
Tom Rini
- [PATCH v2 09/10] sandbox: tpm: Correct handling of SANDBOX_TPM_PCR_NB
Simon Glass
- [PATCH v2 09/10] sandbox: tpm: Correct handling of SANDBOX_TPM_PCR_NB
Simon Glass
- [PATCH v2 09/14] ast2600: spl: Add ARCY probing
Chia-Wei Wang
- [PATCH v2 09/14] doc: Convert command-line info to rST
Simon Glass
- [PATCH v2 1/1] bootcount: add a new driver with syscon as backend
Simon Glass
- [PATCH v2 1/1] lib: move rtc-lib.c to lib
Tom Rini
- [PATCH v2 1/1] sandbox: don't refer to symbol _init
Simon Glass
- [PATCH v2 1/2] arm: dts: add imx8mp-rsb3720-a1 dts file
Ying-Chun Liu
- [PATCH v2 1/2] arm: use the correct prototype for reset_cpu function
Patrick Delaunay
- [PATCH v2 1/2] arm: use the correct prototype for reset_cpu function
Tom Rini
- [PATCH v2 1/2] efi_loader: fix set_capsule_result()
AKASHI Takahiro
- [PATCH v2 1/2] efi_loader: fix set_capsule_result()
Heinrich Schuchardt
- [PATCH v2 1/2] efi_loader: fix set_capsule_result()
AKASHI Takahiro
- [PATCHv2 1/2] i2c: add dm_i2c_reg_clrset
Sebastian Reichel
- [PATCHv2 1/2] i2c: add dm_i2c_reg_clrset
Simon Glass
- [PATCH v2 1/2] mmc: Check for device with a seq number equal to num before checking against index
Ricardo Salveti
- [PATCH v2 1/2] mmc: Check for device with a seq number equal to num before checking against index
Aswath Govindraju
- [PATCH v2 1/2] mmc: Check for device with a seq number equal to num before checking against index
Ricardo Salveti
- [PATCH v2 1/2] mtd: spi-nor: Respect flash's hwcaps in spi_nor_adjust_hwcaps()
Bin Meng
- [PATCH v2 1/2] riscv: add missing SBI extension definitions
Heinrich Schuchardt
- [PATCH V2 1/2] spl: mmc: Factor out eMMC boot partition selection code
Marek Vasut
- [PATCH V2 1/2] spl: mmc: Factor out eMMC boot partition selection code
Jaehoon Chung
- [PATCH V2 1/2] spl: mmc: Factor out eMMC boot partition selection code
sbabic at denx.de
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Tim Harvey
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Marek Vasut
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Tim Harvey
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Marek Vasut
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Fabio Estevam
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Tim Harvey
- [PATCH v2 1/2] usb: ehci-mx6: move mode set/detect to probe
Marek Vasut
- [PATCH v2 1/3] imx8: Drop raw image support
Simon Glass
- [PATCH v2 1/3] imx8: Drop raw image support
Michael Walle
- [PATCH v2 1/3] lib/vsprintf.c: implement printf() in terms of vprintf()
Tom Rini
- [PATCH v2 1/3] net: ethtool: Add ethernet speed macros for higher speeds
Ashok Reddy Soma
- [PATCH v2 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Stephan Gerhold
- [PATCH v2 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Jaehoon Chung
- [PATCH v2 1/3] power: pmic: Add driver for ST-Ericsson AB8500 via PRCMU
Tom Rini
- [PATCH v2 1/3] risv: add missing SBI extension definitions
Heinrich Schuchardt
- [PATCH v2 1/3] risv: add missing SBI extension definitions
Sean Anderson
- [PATCH v2 1/3] risv: add missing SBI extension definitions
Leo Liang
- [PATCH v2 1/3] risv: add missing SBI extension definitions
Leo Liang
- [PATCH v2 1/3] samsung: exynos: Convert SROMC interface to a driver
Simon Glass
- [PATCH v2 1/3] samsung: exynos: Convert SROMC interface to a driver
Minkyu Kang
- [PATCH v2 1/3] usb: f_mass_storage: Check bh->state in sleep_thread
Sean Anderson
- [PATCHv2 1/4] ge_bx50v3: Remove unused USB related defines
Tom Rini
- [PATCHv2 1/4] ge_bx50v3: Remove unused USB related defines
Sebastian Reichel
- [PATCHv2 1/4] ge_bx50v3: Remove unused USB related defines
Tom Rini
- [PATCH v2 1/4] test: Allow vboot tests to run in parallel
Simon Glass
- [PATCH v2 1/4] xilinx: zynqmp: Change multi_boot() to return value
Michal Simek
- [PATCH v2 1/5] arm: stm32mp: add config for STM32IMAGE support
Patrick Delaunay
- [PATCH v2 1/5] checkpatch: Support wide strings
Simon Glass
- [PATCH v2 1/5] configs: meson64_android: use BCB for reboot to bootloader
Mattijs Korpershoek
- [PATCH v2 1/5] dt-bindings: Resync omap & am33xx pinctrl bindings
Paul Barker
- [PATCH v2 1/5] mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
Frieder Schrempf
- [PATCH v2 1/6] arch: arm: mach-k3: am642_init: Correct the function name spl_boot_mode() to spl_mmc_boot_mode()
Aswath Govindraju
- [PATCH v2 1/6] board: colibri_imx7: use SDP if USB serial downloader has been used
Oleksandr Suvorov
- [PATCH v2 1/6] board: synquacer: Initialize SCBM SMMU at board_init()
Masami Hiramatsu
- [PATCH v2 1/6] dm: pci: add option to map virtual system memory base address
Daniel Schwierzeck
- [PATCH v2 1/6] dm: pci: add option to map virtual system memory base address
Simon Glass
- [PATCH v2 1/6] efi_loader: increase eventlog buffer size
Masahisa Kojima
- [PATCH v2 1/6] efi_loader: increase eventlog buffer size
Heinrich Schuchardt
- [PATCH v2 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Ashok Reddy Soma
- [PATCH v2 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Michal Simek
- [PATCH v2 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Ashok Reddy Soma
- [PATCH v2 1/6] net: eth-phy: add support of device tree configuration for gpio reset
Patrick DELAUNAY
- [PATCH v2 1/8] lpc32xx: Kconfig: switch to CONFIG_CONS_INDEX
Tom Rini
- [PATCH v2 1/8] mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay
Ashok Reddy Soma
- [PATCH v2 1/9] arm: dts: imx8mp: Resync imx8mp device tree include
Teresa Remmet
- [PATCH v2 1/9] arm: dts: imx8mp: Resync imx8mp device tree include
Heiko Schocher
- [PATCH v2 1/9] configs: Resync with savedefconfig
Simon Glass
- [PATCH v2 1/9] tools: mkeficapsule: add firmwware image signing
AKASHI Takahiro
- [PATCH v2 1/9] tools: mkeficapsule: add firmwware image signing
Masami Hiramatsu
- [PATCH v2 10/10] sandbox: tpm: Support extending a PCR multiple times
Simon Glass
- [PATCH v2 10/10] sandbox: tpm: Support extending a PCR multiple times
Simon Glass
- [PATCH v2 10/14] ARM: dts: ast2600: Add ARCY to device tree
Chia-Wei Wang
- [PATCH v2 10/14] doc: Add a note about number representation
Simon Glass
- [PATCH v2 10/16] sandbox: cros_ec: Update error handling when reading matrix
Tom Rini
- [PATCH V2 10/46] arm: imx8ulp: add container support
Stefano Babic
- [PATCH V2 10/46] arm: imx8ulp: add container support
Peng Fan
- [PATCH v2 11/14] ast2600: spl: Locate load buffer in DRAM space
Chia-Wei Wang
- [PATCH v2 11/14] board: freescale: ls2081ardb: Update I2C mux config
Priyanka Jain
- [PATCH v2 11/14] lib: Allow using 0x when a decimal value is requested
Simon Glass
- [PATCH v2 11/16] cbfs: Check offset range when reading a file
Tom Rini
- [PATCH v2 12/14] configs: ast2600-evb: Enable SPL FIT support
Chia-Wei Wang
- [PATCH v2 12/14] lib: Support a decimal prefix 0n
Simon Glass
- [PATCH v2 12/16] pinctrl: Avoid coverity warning when checking width
Tom Rini
- [PATCH v2 13/14] configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
Chia-Wei Wang
- [PATCH v2 13/14] lib: Drop octal support
Simon Glass
- [PATCH v2 13/16] tpm: Check outgoing command size
Tom Rini
- [PATCH v2 14/14] configs: ast2600: Boot kernel FIT in DRAM
Chia-Wei Wang
- [PATCH v2 14/14] RFC: Change simple_strtoul() et al to default to hex
Simon Glass
- [PATCH v2 14/16] sandbox: Silence coverity warning in state_read_file()
Tom Rini
- [PATCH v2 15/16] clk: Detect failure to set defaults
Tom Rini
- [PATCH v2 17/33] dtoc: Process driver aliases along with drivers
Simon Glass
- [PATCH v2 2/2] arm64: Update memcpy_{from, to}io() helpers
Patrick Delaunay
- [PATCH v2 2/2] arm64: Update memcpy_{from, to}io() helpers
Tom Rini
- [PATCH v2 2/2] arm: imx8m: add support for Advantech RSB-3720
Ying-Chun Liu
- [PATCH v2 2/2] arm: imx8m: add support for Advantech RSB-3720
Peng Fan (OSS)
- [PATCH V2 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
Marek Vasut
- [PATCH V2 2/2] ARM: imx: Pick correct eMMC boot partition from ROM log
sbabic at denx.de
- [PATCH v2 2/2] cmd/sbi: add missing SBI information
Heinrich Schuchardt
- [PATCH v2 2/2] firmware: scmi: fix sandbox and related test since clock discovery
Tom Rini
- [PATCHv2 2/2] gpio: mcp230xx: Introduce new driver
Sebastian Reichel
- [PATCHv2 2/2] gpio: mcp230xx: Introduce new driver
Simon Glass
- [PATCH v2 2/2] mtd: spi-nor: Mask out fast read if not requested in DT
Bin Meng
- [PATCH v2 2/2] mtd: spi-nor: Mask out fast read if not requested in DT
Pratyush Yadav
- [PATCH v2 2/2] mtd: spi-nor: Mask out fast read if not requested in DT
Bin Meng
- [PATCH v2 2/3] arm: Add an __image_copy_start symbol for ARMv8
Simon Glass
- [PATCH v2 2/3] arm: Add an __image_copy_start symbol for ARMv8
Tim Harvey
- [PATCH v2 2/3] arm: Add an __image_copy_start symbol for ARMv8
Simon Glass
- [PATCH v2 2/3] cmd/sbi: use constants instead of numerical values
Heinrich Schuchardt
- [PATCH v2 2/3] lib/vsprintf.c: remove stale comment
Tom Rini
- [PATCH v2 2/3] net: xilinx: axi_mrmac: Add MRMAC driver
Ashok Reddy Soma
- [PATCH v2 2/3] net: xilinx: axi_mrmac: Add MRMAC driver
Ashok Reddy Soma
- [PATCH v2 2/3] net: xilinx: axi_mrmac: Add MRMAC driver
Ashok Reddy Soma
- [PATCH v2 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Stephan Gerhold
- [PATCH v2 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Jaehoon Chung
- [PATCH v2 2/3] phy: Add driver for ST-Ericsson AB8500 USB PHY
Tom Rini
- [PATCH v2 2/3] test: Fix size_t formats in strlcat test
Simon Glass
- [PATCH v2 2/3] test: Fix size_t formats in strlcat test
Minkyu Kang
- [PATCH v2 2/3] usb: f_mass_storage: Drop wakeup_needed
Sean Anderson
- [PATCHv2 2/4] tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmd
Tom Rini
- [PATCHv2 2/4] tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmd
Tom Warren
- [PATCHv2 2/4] tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmd
Tom Rini
- [PATCH v2 2/4] test: Allow hush tests to run in parallel
Simon Glass
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Bin Meng
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Marek Vasut
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Bin Meng
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Andre Przywara
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Bin Meng
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Marek Vasut
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Marek Vasut
- [PATCH v2 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Andre Przywara
- [PATCH v2 2/4] xilinx: zynqmp: use zynqmp_mmio_read() in multi_boot()
Michal Simek
- [PATCH v2 2/5] arm: dts: Resync BeagleBone device trees
Paul Barker
- [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
Patrick Delaunay
- [PATCH v2 2/5] configs: meson64_android: implement recovery boot via BCB
Mattijs Korpershoek
- [PATCH v2 2/5] pci: swap_case: Allow compilation on 32-bit machines
Simon Glass
- [PATCH v2 2/5] pci: swap_case: Allow compilation on 32-bit machines
Tom Rini
- [PATCH v2 2/5] spi: fsl_qspi: Build driver only if DM_SPI is available
Frieder Schrempf
- [PATCH v2 2/5] spi: fsl_qspi: Build driver only if DM_SPI is available
Stefan Roese
- [PATCH v2 2/5] spi: fsl_qspi: Build driver only if DM_SPI is available
Jagan Teki
- [PATCH v2 2/5] spi: fsl_qspi: Build driver only if DM_SPI is available
Frieder Schrempf
- [PATCH v2 2/6] arch: dts: am642-sk-u-boot: Disable main_sdhci0 DT node and define alias index 1 for main_sdhci1 node
Aswath Govindraju
- [PATCH v2 2/6] board: toradex: make USB PID from config block optional
Oleksandr Suvorov
- [PATCH v2 2/6] configs: synquacer: Make U-Boot binary position independent
Masami Hiramatsu
- [PATCH v2 2/6] efi_loader: add secure boot variable measurement
Masahisa Kojima
- [PATCH v2 2/6] efi_loader: add secure boot variable measurement
Heinrich Schuchardt
- [PATCH v2 2/6] efi_loader: add secure boot variable measurement
Simon Glass
- [PATCH v2 2/6] efi_loader: add secure boot variable measurement
Masahisa Kojima
- [PATCH v2 2/6] efi_loader: add secure boot variable measurement
Simon Glass
- [PATCH v2 2/6] mmc: zynq_sdhci: Allow configuring zero Tap values
Ashok Reddy Soma
- [PATCH v2 2/6] pci: gt64120: convert to driver model
Daniel Schwierzeck
- [PATCH v2 2/8] mmc: sdhci: Change prototype of set_delay to return errors
Ashok Reddy Soma
- [PATCH v2 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Teresa Remmet
- [PATCH v2 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Heiko Schocher
- [PATCH v2 2/9] Makefile: Drop include/asm directory as well as symlink
Simon Glass
- [PATCH v2 2/9] Makefile: Drop include/asm directory as well as symlink
Tom Rini
- [PATCH v2 2/9] tools: mkeficapsule: add man page
AKASHI Takahiro
- [PATCHv2 25/27] ppc: Remove T4160RDB board
Tom Rini
- [PATCH v2 3/3] binman: Show an error if __image_copy_start is missing
Simon Glass
- [PATCH v2 3/3] binman: Show an error if __image_copy_start is missing
Tim Harvey
- [PATCH v2 3/3] lib/vsprintf.c: remove unused ip6_addr_string()
Tom Rini
- [PATCH v2 3/3] snow: Enable unit tests
Simon Glass
- [PATCH v2 3/3] snow: Enable unit tests
Minkyu Kang
- [PATCH v2 3/3] sysreset: provide SBI based sysreset driver
Heinrich Schuchardt
- [PATCH v2 3/3] sysreset: provide SBI based sysreset driver
Sean Anderson
- [PATCH v2 3/3] sysreset: provide SBI based sysreset driver
Leo Liang
- [PATCH v2 3/3] usb: f_mass_storage: Stop after the host deconfigures us
Sean Anderson
- [PATCH v2 3/3] usb: musb-new: Add glue driver for ST-Ericsson Ux500
Stephan Gerhold
- [PATCH v2 3/3] usb: musb-new: Add glue driver for ST-Ericsson Ux500
Tom Rini
- [PATCH v2 3/3] xilinx: versal: Enable Xilinx AXI MRMAC
Ashok Reddy Soma
- [PATCH v2 3/4] NSA310S : Use Ethernet PHY name from device tree
Tony Dinh
- [PATCH v2 3/4] NSA310S : Use Ethernet PHY name from device tree
Stefan Roese
- [PATCH v2 3/4] test: Allow tpm2 tests to run in parallel
Simon Glass
- [PATCHv2 3/4] treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USB
Tom Rini
- [PATCHv2 3/4] treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USB
Tom Rini
- [PATCH v2 3/4] xilinx: zynqmp: Config non zero SYS_SPI_U_BOOT_OFFS
Michal Simek
- [PATCH v2 3/5] arm: dts: Import am335x-sancloud-bbe devicetree
Paul Barker
- [PATCH v2 3/5] arm: stm32mp: add defconfig for trusted boot with FIP
Patrick Delaunay
- [PATCH v2 3/5] clk: imx8mm: Add SPI clocks
Frieder Schrempf
- [PATCH v2 3/5] configs: meson64_android: reboot to fastbootd from bootloader
Mattijs Korpershoek
- [PATCH v2 3/5] doc: sandbox: Fix up dependencies
Simon Glass
- [PATCH v2 3/5] doc: sandbox: Fix up dependencies
Tom Rini
- [PATCH v2 3/6] board: colibri-imx8x: update building documentation
Oleksandr Suvorov
- [PATCH v2 3/6] configs: am64x_evm_a53_defconfig: Enable configs to support HS200/HS400
Aswath Govindraju
- [PATCH v2 3/6] dts: synquacer: Add partition information to the spi-nor
Masami Hiramatsu
- [PATCH v2 3/6] dts: synquacer: Add partition information to the spi-nor
Marek Behun
- [PATCH v2 3/6] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH v2 3/6] efi_loader: add boot variable measurement
Heinrich Schuchardt
- [PATCH v2 3/6] efi_loader: add boot variable measurement
Masahisa Kojima
- [PATCH v2 3/6] mmc: zynq_sdhci: Use Mask writes for Tap delays
Ashok Reddy Soma
- [PATCH v2 3/6] mmc: zynq_sdhci: Use Mask writes for Tap delays
Michal Simek
- [PATCH v2 3/6] mmc: zynq_sdhci: Use Mask writes for Tap delays
Ashok Reddy Soma
- [PATCH v2 3/6] pci: msc01: convert to driver model
Daniel Schwierzeck
- [PATCH v2 3/8] zynqmp_firmware: Add zynqmp firmware related enums
Ashok Reddy Soma
- [PATCH v2 3/9] arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
Teresa Remmet
- [PATCH v2 3/9] arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
Heiko Schocher
- [PATCH v2 3/9] disk: Tidy up #ifdefs in part_efi
Simon Glass
- [PATCH v2 3/9] disk: Tidy up #ifdefs in part_efi
Tom Rini
- [PATCH v2 3/9] disk: Tidy up #ifdefs in part_efi
Heinrich Schuchardt
- [PATCH v2 3/9] doc: update UEFI document for usage of mkeficapsule
AKASHI Takahiro
- [PATCH v2 4/4] doc: test: Explain how to run pytests in parallel
Simon Glass
- [PATCH v2 4/4] NSA310S : Add DM SATA configs
Tony Dinh
- [PATCHv2 4/4] usb: Enforce DM_USB migration for USB_HOST devices.
Tom Rini
- [PATCHv2 4/4] usb: Enforce DM_USB migration for USB_HOST devices.
Tom Rini
- [PATCH v2 4/4] xilinx: zynqmp: Add support for runtime dfu_alt_info setup
Michal Simek
- [PATCH v2 4/5] configs: am335x_evm: Support GbE PHYs
Paul Barker
- [PATCH v2 4/5] configs: sei610/sei510: set CONFIG_CMD_BCB=y
Mattijs Korpershoek
- [PATCH v2 4/5] doc: st: stm32mp1: Add FIP support for trusted boot
Patrick Delaunay
- [PATCH v2 4/5] efi: Use 16-bit unicode strings
Simon Glass
- [PATCH v2 4/5] efi: Use 16-bit unicode strings
Heinrich Schuchardt
- [PATCH v2 4/5] efi: Use 16-bit unicode strings
Tom Rini
- [PATCH v2 4/5] efi: Use 16-bit unicode strings
Heinrich Schuchardt
- [PATCH v2 4/5] efi: Use 16-bit unicode strings
Tom Rini
- [PATCH v2 4/5] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Frieder Schrempf
- [PATCH v2 4/5] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Stefano Babic
- [PATCH v2 4/5] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Frieder Schrempf
- [PATCH v2 4/5] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Stefano Babic
- [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware
Simon Glass
- [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware
Jan Kiszka
- [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware
Simon Glass
- [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware
Jan Kiszka
- [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware
Jan Kiszka
- [PATCH v2 4/5] watchdog: rti_wdt: Add support for loading firmware
Simon Glass
- [PATCH v2 4/6] board: colibri_imx6: add board_fit_config_name_match to support FIT in SPL
Oleksandr Suvorov
- [PATCH v2 4/6] configs: am64x_evm: Move CONFIG_SYS_MMC_ENV_DEV and CONFIG_SYS_MMC_ENV_PART to defconfig files and enable configs to save env in eMMC and FAT write.
Aswath Govindraju
- [PATCH v2 4/6] configs: synquacer: Remove mtdparts settings and update DFU setting
Masami Hiramatsu
- [PATCH v2 4/6] efi_loader: add ExitBootServices() measurement
Masahisa Kojima
- [PATCH v2 4/6] MIPS: malta: add DT bindings for PCI host controller
Daniel Schwierzeck
- [PATCH v2 4/6] mmc: zynq_sdhci: Split set_tapdelay function to in and out
Ashok Reddy Soma
- [PATCH v2 4/8] mmc: zynq_sdhci: Use xilinx pm request instead of mmio_write
Ashok Reddy Soma
- [PATCH v2 4/8] mmc: zynq_sdhci: Use xilinx pm request instead of mmio_write
Michal Simek
- [PATCH v2 4/9] board: phytec: phycore_imx8mp: Change debug UART
Teresa Remmet
- [PATCH v2 4/9] board: phytec: phycore_imx8mp: Change debug UART
Heiko Schocher
- [PATCH v2 4/9] board: phytec: phycore_imx8mp: Change debug UART
Teresa Remmet
- [PATCH v2 4/9] efi_loader: ease the file path check for public key
AKASHI Takahiro
- [PATCH v2 4/9] Use LIB_UUID with ACPIGEN and FS_BTRFS
Simon Glass
- [PATCH v2 4/9] Use LIB_UUID with ACPIGEN and FS_BTRFS
Tom Rini
- [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection
Paul Barker
- [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection
Lokesh Vutla
- [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection
Paul Barker
- [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection
Lokesh Vutla
- [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection
Paul Barker
- [PATCH v2 5/5] configs: am335x_evm: Fix BeagleBone Green DTB selection
Lokesh Vutla
- [PATCH v2 5/5] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
Frieder Schrempf
- [PATCH v2 5/5] Revert "ARM: meson: Add support for fastboot_set_reboot_flag()"
Mattijs Korpershoek
- [PATCH v2 5/5] sandbox: Detect the host bit size automatically
Simon Glass
- [PATCH v2 5/5] sandbox: Detect the host bit size automatically
Heinrich Schuchardt
- [PATCH v2 5/5] stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP
Patrick Delaunay
- [PATCH v2 5/6] board: colibri_vf: fix compiling warning
Oleksandr Suvorov
- [PATCH v2 5/6] configs: am64x_evm_*_defconfig: Enable configs to support eMMC boot
Aswath Govindraju
- [PATCH v2 5/6] configs: synquacer: Drop Ext2/4 support by default
Masami Hiramatsu
- [PATCH v2 5/6] efi_loader: refactor efi_append_scrtm_version()
Masahisa Kojima
- [PATCH v2 5/6] MIPS: malta: add support for PCI driver model
Daniel Schwierzeck
- [PATCH v2 5/6] mmc: zynq_sdhci: Fix kernel doc warnings
Ashok Reddy Soma
- [PATCH v2 5/8] mmc: zynq_sdhci: Move setting tapdelay code to driver
Ashok Reddy Soma
- [PATCH v2 5/8] mmc: zynq_sdhci: Move setting tapdelay code to driver
Ashok Reddy Soma
- [PATCH v2 5/9] Allow efi_loader header to be included always
Simon Glass
- [PATCH v2 5/9] Allow efi_loader header to be included always
Tom Rini
- [PATCH v2 5/9] board: phytec: phycore_imx8mp: Add fec support
Teresa Remmet
- [PATCH v2 5/9] board: phytec: phycore_imx8mp: Add fec support
Heiko Schocher
- [PATCH v2 5/9] test/py: efi_capsule: add image authentication test
AKASHI Takahiro
- [PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery
Oleksandr Suvorov
- [PATCH v2 6/6] configs: am64x_evm_*_defconfig: Enable config to support gpt and FDT library overlay
Aswath Govindraju
- [PATCH v2 6/6] configs: synquacer: Enable UEFI secure boot
Masami Hiramatsu
- [PATCH v2 6/6] efi_loader: add comment for efi_tcg2.h
Masahisa Kojima
- [PATCH v2 6/6] MIPS: malta: enable PCI driver model
Daniel Schwierzeck
- [PATCH v2 6/6] mmc: zynq_sdhci: Make variables/structure static
Ashok Reddy Soma
- [PATCH v2 6/8] mmc: zynq_sdhci: Change variable deviceid to node_id
Ashok Reddy Soma
- [PATCH v2 6/8] mmc: zynq_sdhci: Change variable deviceid to node_id
Ashok Reddy Soma
- [PATCH v2 6/9] board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
Teresa Remmet
- [PATCH v2 6/9] lib: Create a new Kconfig option for charset conversion
Simon Glass
- [PATCH v2 6/9] lib: Create a new Kconfig option for charset conversion
Tom Rini
- [PATCH v2 6/9] sandbox: add config for efi capsule authentication test
AKASHI Takahiro
- [PATCH v2 6/9] sandbox: add config for efi capsule authentication test
Heinrich Schuchardt
- [PATCH v2 6/9] sandbox: add config for efi capsule authentication test
AKASHI Takahiro
- [PATCH v2 6/9] sandbox: add config for efi capsule authentication test
Simon Glass
- [PATCH v2 7/8] mmc: zynq_sdhci: Wait till sd card detect state is stable
Ashok Reddy Soma
- [PATCH v2 7/9] board: phytec: phycore-imx8mp: Enable DVS1 control
Teresa Remmet
- [PATCH v2 7/9] GitLab: add a test rule for efi capsule authentication test
AKASHI Takahiro
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Simon Glass
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Tom Rini
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Heinrich Schuchardt
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Tom Rini
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Simon Glass
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Tom Rini
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Simon Glass
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Tom Rini
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Simon Glass
- [PATCH v2 7/9] Make EFI_LOADER depend on DM and OF_CONTROL
Tom Rini
- [PATCH v2 8/8] mmc: zynq_sdhci: Use set_control_reg from sdhci.c
Ashok Reddy Soma
- [PATCH v2 8/8] mmc: zynq_sdhci: Use set_control_reg from sdhci.c
Ashok Reddy Soma
- [PATCH v2 8/9] Add an option for EBBR
Simon Glass
- [PATCH v2 8/9] Add an option for EBBR
Heinrich Schuchardt
- [PATCH v2 8/9] Add an option for EBBR
Tom Rini
- [PATCH v2 8/9] arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
Teresa Remmet
- [PATCH v2 8/9] tools: mkeficapsule: allow for specifying GUID explicitly
AKASHI Takahiro
- [PATCH v2 9/9] board: phytec: imx8mp-phycore: Switch to binman
Teresa Remmet
- [PATCH v2 9/9] board: phytec: imx8mp-phycore: Switch to binman
Heiko Schocher
- [PATCH v2 9/9] board: phytec: imx8mp-phycore: Switch to binman
Jagan Teki
- [PATCH v2 9/9] board: phytec: imx8mp-phycore: Switch to binman
Teresa Remmet
- [PATCH v2 9/9] board: phytec: imx8mp-phycore: Switch to binman
Jagan Teki
- [PATCH v2 9/9] efi: Make EBBR optional
Simon Glass
- [PATCH v2 9/9] efi: Make EBBR optional
Tom Rini
- [PATCH v2 9/9] efi: Make EBBR optional
Simon Glass
- [PATCH v2 9/9] efi: Make EBBR optional
Heinrich Schuchardt
- [PATCH v2 9/9] test/py: efi_capsule: align with the syntax change of mkeficapsule
AKASHI Takahiro
- [PATCH V2] ARM: imx6: Update dhelectronics/dh_imx6/MAINTAINERS file
sbabic at denx.de
- [PATCH V2] ARM: imx6: Update dhelectronics/dh_imx6/MAINTAINERS file
sbabic at denx.de
- [PATCH v2] board: sifive: drop stuff related to unmatched revision 1
Zong Li
- [PATCH v2] board: sl28: add DSA support for variant 2
Ramon Fried
- [PATCH v2] cmd:Elaborate 'blkcache' cmd HELP statement
Simon Glass
- [PATCH v2] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Sean Anderson
- [PATCH v2] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Marek Vasut
- [PATCH v2] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Sean Anderson
- [PATCH v2] cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_num
Sean Anderson
- [PATCHv2] configs: am65x_evm: Switch envboot out for distro_bootcmd
Tom Rini
- [PATCHv2] configs: am65x_evm: Switch envboot out for distro_bootcmd
Lokesh Vutla
- [PATCH v2] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
chenguanqiao
- [PATCH v2] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
Simon Glass
- [PATCHv2] doc: Add basic information about running CI tests
Tom Rini
- [PATCH v2] doc: Bring in Makefile documentation
Simon Glass
- [PATCH v2] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART
Teresa Remmet
- [PATCH v2] drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART
Stefan Roese
- [PATCH v2] dts: Makefile: add support to build dedicated devicetree
Kory Maincent
- [PATCH v2] efi_loader: capsule: remove authentication data
AKASHI Takahiro
- [PATCH v2] efi_loader: capsule: remove unused guid
AKASHI Takahiro
- [PATCH v2] efi_loader: capsule: remove unused guid
Heinrich Schuchardt
- [PATCH v2] efi_loader: remove asm/setjmp.h from efi_api.h
AKASHI Takahiro
- [PATCH v2] MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
Ley Foon Tan
- [PATCH v2] MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
Marek Vasut
- [PATCH v2] MAINTAINERS, git-mailrc: socfpga: Change co-maintainer to Tien Fong Chee
Tom Rini
- [PATCH v2] mmc: Add support for enumerating MMC card in a given mode using mmc command
Aswath Govindraju
- [PATCH v2] patman: add warning for invalid tag
Patrick Delaunay
- [PATCH v2] patman: add warning for invalid tag
Simon Glass
- [PATCH v2] patman: add warning for invalid tag
Simon Glass
- [PATCH v2] pci: imx: use reset-gpios if defined by device-tree
Tim Harvey
- [PATCH v2] pci: imx: use reset-gpios if defined by device-tree
sbabic at denx.de
- [PATCH v2] pci: imx: use reset-gpios if defined by device-tree
sbabic at denx.de
- [PATCH v2] qemu-riscv64_smode: fix extlinux (define preboot)
Dimitri John Ledkov
- [PATCH v2] riscv: dts: add OpenPiton RISC-V board dts support
Tianrui Wei
- [PATCH v2] serial: pl011: Enable DEBUG_UART_PL011 in SPL
Chen Baozi
- [PATCH v2] serial: pl011: Resend the character if FIFO is full in debug uart
Chen Baozi
- [PATCH v2] serial: pl011: Resend the character if FIFO is full in debug uart
Simon Glass
- [PATCH v2] serial: pl011: Resend the character if FIFO is full in debug uart
Tom Rini
- [PATCH V2] spi: Update speed/mode on change
Da Xue
- [PATCH V2] spi: Update speed/mode on change
Marek Vasut
- [PATCH V2] spi: Update speed/mode on change
Marek Vasut
- [PATCH V2] spi: Update speed/mode on change
Da Xue
- [PATCH V2] spi: Update speed/mode on change
Marek Vasut
- [PATCH V2] spi: Update speed/mode on change
Da Xue
- [PATCH V2] spi: Update speed/mode on change
Marek Vasut
- [PATCH V2] spi: Update speed/mode on change
Da Xue
- [PATCH V2] spi: Update speed/mode on change
Marek Vasut
- [PATCH v2] tee: optee: sync cache on pre-reloc OP-TEE invocation
Tom Rini
- [PATCH v2] test/py: efi_capsule: align with efidebug syntax changes
AKASHI Takahiro
- [PATCH v2] tools: Use a single target-independent config to enable OpenSSL
Alexandru Gagniuc
- [PATCH v2] tools: Use a single target-independent config to enable OpenSSL
Tom Rini
- [PATCH v3 0/2] arm: imx8m: add support for Advantech RSB-3720
Ying-Chun Liu
- [PATCH v3 0/2] efi_loader: indicating capsule update results
Heinrich Schuchardt
- [PATCH v3 0/3] Add MRMAC driver support
Ashok Reddy Soma
- [PATCH v3 0/3] Add MRMAC driver support
Michal Simek
- [PATCH v3 0/3] test/py: Rewrite SquashFS commands test suite
Joao Marcos Costa
- [PATCH v3 0/4] Allwinner H6 USB3 support
Andre Przywara
- [PATCH v3 0/5] Add PMIC node for J7200
Gowtham Tammana
- [PATCH v3 0/5] Add PMIC node for J7200
Lokesh Vutla
- [PATCH v3 0/5] Add SIMATIC IOT2050 board support
Lokesh Vutla
- [PATCH v3 0/5] Add SIMATIC IOT2050 board support
Jan Kiszka
- [PATCH v3 0/5] Add SIMATIC IOT2050 board support
Lokesh Vutla
- [PATCH v3 0/5] Add SIMATIC IOT2050 board support
Lokesh Vutla
- [PATCH v3 0/5] Add SIMATIC IOT2050 board support
Jan Kiszka
- [PATCH v3 0/5] stm32mp1: handle TF-A boot with FIP
Patrick Delaunay
- [PATCH v3 0/6] cmd: setexpr: add fmt format string operation
Roland Gaudig
- [PATCH v3 0/6] net: dwc_eth_qos: add support of device tree configuration for reset delay
Patrick Delaunay
- [PATCH v3 0/6] This patch set fixes minor issues related to tapdelays
Ashok Reddy Soma
- [PATCH v3 0/6] This patch set fixes minor issues related to tapdelays
Michal Simek
- [PATCH v3 0/7] Arasan sdhci driver updates
Ashok Reddy Soma
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Simon Glass
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Simon Glass
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Tom Rini
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Simon Glass
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Michael Nazzareno Trimarchi
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Simon Glass
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Tom Rini
- [PATCH v3 0/7] vpl: Introduce a verifying program loader
Simon Glass
- [PATCH v3 0/8] arm64: synquacer: DeveloperBox updates
Masami Hiramatsu
- [PATCH v3 0/9] board: freescale: common: Refactor I2C mux driver
Stephen Carlson
- [PATCH v3 0/9] phyCORE-i.MX8MP Update
Teresa Remmet
- [PATCH v3 00/10] handling all DM watchdogs in watchdog_reset()
Rasmus Villemoes
- [PATCH v3 00/14] aspeed: Support secure boot chain with FIT image verification
Chia-Wei Wang
- [PATCH v3 00/16] misc: Some more misc patches
Simon Glass
- [PATCH v3 00/16] misc: Some more misc patches
Bin Meng
- [PATCH v3 00/19] tools: Use a single config for Host OpenSSL (plus dependent patches)
Alexandru Gagniuc
- [Patch V3 00/44] imx: add i.MX8ULP support
Peng Fan (OSS)
- [Patch V3 00/44] imx: add i.MX8ULP support
Stefano Babic
- [PATCH v3 01/10] watchdog: wdt-uclass.c: use wdt_start() in wdt_expire_now()
Rasmus Villemoes
- [PATCH v3 01/14] aspeed: ast2600: Enlarge SRAM size
Chia-Wei Wang
- [PATCH v3 01/19] image: Shorten FIT_ENABLE_SHAxxx_SUPPORT
Alexandru Gagniuc
- [PATCH v3 01/19] image: Shorten FIT_ENABLE_SHAxxx_SUPPORT
Tom Rini
- [Patch V3 01/44] arm: imx: add i.MX8ULP basic Kconfig option
Peng Fan (OSS)
- [Patch V3 01/44] arm: imx: add i.MX8ULP basic Kconfig option
sbabic at denx.de
- [PATCH v3 02/10] watchdog: wdt-uclass.c: introduce struct wdt_priv
Rasmus Villemoes
- [PATCH v3 02/10] watchdog: wdt-uclass.c: introduce struct wdt_priv
Stefan Roese
- [PATCH v3 02/14] clk: ast2600: Add YCLK control for HACE
Chia-Wei Wang
- [PATCH v3 02/19] image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxx
Alexandru Gagniuc
- [Patch V3 02/44] arm: imx: add i.MX8ULP cpu type and helper
Peng Fan (OSS)
- [Patch V3 02/44] arm: imx: add i.MX8ULP cpu type and helper
sbabic at denx.de
- [PATCH v3 03/10] watchdog: wdt-uclass.c: neaten UCLASS_DRIVER definition
Rasmus Villemoes
- [PATCH v3 03/14] crypto: aspeed: Add AST2600 HACE support
Chia-Wei Wang
- [PATCH v3 03/14] crypto: aspeed: Add AST2600 HACE support
Simon Glass
- [PATCH v3 03/14] crypto: aspeed: Add AST2600 HACE support
ChiaWei Wang
- [PATCH v3 03/14] crypto: aspeed: Add AST2600 HACE support
Simon Glass
- [PATCH v3 03/16] x86: Allow coreboot serial driver to guess the UART
Bin Meng
- [PATCH v3 03/16] x86: Allow coreboot serial driver to guess the UART
Simon Glass
- [PATCH v3 03/19] image: Rename CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORT
Alexandru Gagniuc
- [Patch V3 03/44] arm: imx: sys_proto: move boot mode define to common header
Peng Fan (OSS)
- [Patch V3 03/44] arm: imx: sys_proto: move boot mode define to common header
sbabic at denx.de
- [PATCH v3 04/10] watchdog: wdt-uclass.c: refactor initr_watchdog()
Rasmus Villemoes
- [PATCH v3 04/14] ast2600: spl: Add HACE probing
Chia-Wei Wang
- [PATCH v3 04/19] Kconfig: Rename SPL_CRC32_SUPPORT to SPL_CRC32
Alexandru Gagniuc
- [Patch V3 04/44] arm: imx8ulp: support print cpu info
Peng Fan (OSS)
- [Patch V3 04/44] arm: imx8ulp: support print cpu info
sbabic at denx.de
- [PATCH v3 05/10] watchdog: wdt-uclass.c: keep track of each device's running state
Rasmus Villemoes
- [PATCH v3 05/14] ARM: dts: ast2600: Add HACE to device tree
Chia-Wei Wang
- [PATCH v3 05/19] Kconfig: Rename SPL_MD5_SUPPORT to SPL_MD5
Alexandru Gagniuc
- [Patch V3 05/44] imx: imx8ulp: add get reset cause
Peng Fan (OSS)
- [Patch V3 05/44] imx: imx8ulp: add get reset cause
sbabic at denx.de
- [PATCH v3 06/10] sandbox: disable CONFIG_WATCHDOG_AUTOSTART
Rasmus Villemoes
- [PATCH v3 06/14] common: fit: Use hash.c to call CRC/SHA function
Chia-Wei Wang
- [PATCH v3 06/14] common: fit: Use hash.c to call CRC/SHA function
Tom Rini
- [PATCH v3 06/14] common: fit: Use hash.c to call CRC/SHA function
ChiaWei Wang
- [PATCH v3 06/14] common: fit: Use hash.c to call CRC/SHA function
Tom Rini
- [PATCH v3 06/19] image: Drop IMAGE_ENABLE_SHA1
Alexandru Gagniuc
- [Patch V3 06/44] arm: imx: basic i.MX8ULP support
Peng Fan (OSS)
- [Patch V3 06/44] arm: imx: basic i.MX8ULP support
sbabic at denx.de
- [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()
Rasmus Villemoes
- [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()
Simon Glass
- [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()
Stefan Roese
- [PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()
Stefan Roese
- [PATCH v3 07/14] clk: ast2600: Add RSACLK control for ARCY
Chia-Wei Wang
- [PATCH v3 07/19] image: Drop IMAGE_ENABLE_SHAxxx
Alexandru Gagniuc
- [Patch V3 07/44] arm: imx8: Move container parser and image to mach-imx common folder
Peng Fan (OSS)
- [Patch V3 07/44] arm: imx8: Move container parser and image to mach-imx common folder
sbabic at denx.de
- [PATCH v3 08/10] watchdog: add gpio watchdog driver
Rasmus Villemoes
- [PATCH v3 08/14] crypto: aspeed: Add AST2600 ARCY support
Chia-Wei Wang
- [PATCH v3 08/19] image: Drop IMAGE_ENABLE_BEST_MATCH
Alexandru Gagniuc
- [Patch V3 08/44] arm: imx8: Move container image header file to mach-imx
Peng Fan (OSS)
- [Patch V3 08/44] arm: imx8: Move container image header file to mach-imx
sbabic at denx.de
- [PATCH v3 09/10] sandbox: add test of wdt_gpio driver
Rasmus Villemoes
- [PATCH v3 09/14] ast2600: spl: Add ARCY probing
Chia-Wei Wang
- [PATCH v3 09/19] common: Move host-only logic in image-sig.c to separate file
Alexandru Gagniuc
- [Patch V3 09/44] arm: imx: parse-container: guard included header files
Peng Fan (OSS)
- [Patch V3 09/44] arm: imx: parse-container: guard included header files
sbabic at denx.de
- [PATCH v3 1/2] arm: dts: add imx8mp-rsb3720-a1 dts file
Ying-Chun Liu
- [PATCH v3 1/2] cmd: pinmux: update result of do_status
Tom Rini
- [PATCH v3 1/2] efi_loader: fix set_capsule_result()
Heinrich Schuchardt
- [PATCH v3 1/2] efi_loader: fix set_capsule_result()
AKASHI Takahiro
- [PATCH v3 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Frieder Schrempf
- [PATCH v3 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
sbabic at denx.de
- [PATCH v3 1/3] net: ethtool: Add ethernet speed macros for higher speeds
Ashok Reddy Soma
- [PATCH v3 1/3] test/py: rewrite common tools for SquashFS tests
Joao Marcos Costa
- [PATCH v3 1/3] test/py: rewrite common tools for SquashFS tests
Simon Glass
- [PATCH v3 1/3] test/py: rewrite common tools for SquashFS tests
Tom Rini
- [PATCH v3 1/3] tools: docker: Install a readable kernel for libguestfs-tools
Tom Rini
- [PATCH v3 1/4] phy: sun50i-usb3: Add a driver for the H6 USB3 PHY
Andre Przywara
- [PATCH v3 1/5] arm: stm32mp: add config for STM32IMAGE support
Patrick Delaunay
- [PATCH v3 1/5] power: pmic: tps65941: Add compatible for LP876441
Gowtham Tammana
- [PATCH v3 1/6] lib: strto: add simple_strtoll function
Roland Gaudig
- [PATCH v3 1/6] lib: strto: add simple_strtoll function
Simon Glass
- [PATCH v3 1/6] lib: strto: add simple_strtoll function
Tom Rini
- [PATCH v3 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Ashok Reddy Soma
- [PATCH v3 1/6] mmc: zynq_sdhci: Resolve uninitialized return value
Jaehoon Chung
- [PATCH v3 1/6] net: eth-phy: add support of device tree configuration for gpio reset
Patrick Delaunay
- [PATCH v3 1/6] net: eth-phy: add support of device tree configuration for gpio reset
Ramon Fried
- [PATCH v3 1/7] doc: Convert SPL documentation to ReST
Simon Glass
- [PATCH v3 1/7] mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay
Ashok Reddy Soma
- [PATCH v3 1/8] board: synquacer: Initialize SCBM SMMU at board_init()
Masami Hiramatsu
- [PATCH v3 1/8] board: synquacer: Initialize SCBM SMMU at board_init()
Tom Rini
- [PATCH v3 1/9] arm: dts: imx8mp: Resync imx8mp device tree include
Teresa Remmet
- [PATCH v3 1/9] arm: dts: imx8mp: Resync imx8mp device tree include
sbabic at denx.de
- [PATCH v3 1/9] arm: dts: imx8mp: Resync imx8mp device tree include
sbabic at denx.de
- [PATCH v3 1/9] board: freescale: Refactor NXP common mux code
Stephen Carlson
- [PATCH v3 1/9] board: freescale: Refactor NXP common mux code
Priyanka Jain
- [PATCH v3 10/10] sandbox: add test of wdt-uclass' watchdog_reset()
Rasmus Villemoes
- [PATCH v3 10/14] ARM: dts: ast2600: Add ARCY to device tree
Chia-Wei Wang
- [PATCH v3 10/19] common: image-sig.c: Remove host-specific logic and #ifdefs
Alexandru Gagniuc
- [Patch V3 10/44] arm: imx8ulp: add container support
Peng Fan (OSS)
- [Patch V3 10/44] arm: imx8ulp: add container support
sbabic at denx.de
- [PATCH v3 11/14] ast2600: spl: Locate load buffer in DRAM space
Chia-Wei Wang
- [PATCH v3 11/19] image: Add support for placing crypto_algo in linker lists
Alexandru Gagniuc
- [Patch V3 11/44] arm: imx: move container Kconfig under mach-imx
Peng Fan (OSS)
- [Patch V3 11/44] arm: imx: move container Kconfig under mach-imx
sbabic at denx.de
- [PATCH v3 12/14] configs: ast2600-evb: Enable SPL FIT support
Chia-Wei Wang
- [PATCH v3 12/19] image: rsa: Move verification algorithm to a linker list
Alexandru Gagniuc
- [Patch V3 12/44] driver: misc: Add MU and S400 API to communicate with Sentinel
Peng Fan (OSS)
- [Patch V3 12/44] driver: misc: Add MU and S400 API to communicate with Sentinel
sbabic at denx.de
- [PATCH v3 13/14] configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
Chia-Wei Wang
- [PATCH v3 13/19] image: image-sig.c: Remove crypto_algos array
Alexandru Gagniuc
- [PATCH v3 13/20] ARM: dts: k3-j721e: Add the entries required for USB3 support on USB0
Kishon Vijay Abraham I
- [PATCH v3 13/20] ARM: dts: k3-j721e: Add the entries required for USB3 support on USB0
Tom Rini
- [Patch V3 13/44] net: fec_mxc: support i.MX8ULP
Peng Fan (OSS)
- [Patch V3 13/44] net: fec_mxc: support i.MX8ULP
sbabic at denx.de
- [PATCH v3 14/14] configs: ast2600: Boot kernel FIT in DRAM
Chia-Wei Wang
- [PATCH v3 14/19] lib: ecdsa: Remove #ifdefs from ecdsa.h
Alexandru Gagniuc
- [Patch V3 14/44] pinctrl: Add pinctrl driver for imx8ulp
Peng Fan (OSS)
- [Patch V3 14/44] pinctrl: Add pinctrl driver for imx8ulp
sbabic at denx.de
- [PATCH v3 15/19] lib: rsa: Remove #ifdefs from rsa.h
Alexandru Gagniuc
- [Patch V3 15/44] driver: serial: fsl_lpuart: support i.MX8ULP
Peng Fan (OSS)
- [Patch V3 15/44] driver: serial: fsl_lpuart: support i.MX8ULP
sbabic at denx.de
- [PATCH v3 16/19] image: Eliminate IMAGE_ENABLE_VERIFY macro
Alexandru Gagniuc
- [Patch V3 16/44] arm: imx8ulp: add clock support
Peng Fan (OSS)
- [Patch V3 16/44] arm: imx8ulp: add clock support
sbabic at denx.de
- [PATCH v3 17/19] image: Eliminate IMAGE_ENABLE_VERIFY_ECDSA macro
Alexandru Gagniuc
- [Patch V3 17/44] drivers: mmc: fsl_esdhc_imx: support i.MX8ULP
Peng Fan (OSS)
- [Patch V3 17/44] drivers: mmc: fsl_esdhc_imx: support i.MX8ULP
sbabic at denx.de
- [PATCH v3 18/19] image: Add support for relocating crypto_algos in linker lists
Alexandru Gagniuc
- [Patch V3 18/44] arm: imx8ulp: soc: Change to use CMC1 to get bootcfg
Peng Fan (OSS)
- [Patch V3 18/44] arm: imx8ulp: soc: Change to use CMC1 to get bootcfg
sbabic at denx.de
- [PATCH v3 19/19] tools: Use a single target-independent config to enable OpenSSL
Alexandru Gagniuc
- [PATCH v3 19/19] tools: Use a single target-independent config to enable OpenSSL
Heiko Thiery
- [PATCH v3 19/19] tools: Use a single target-independent config to enable OpenSSL
Alex G.
- [PATCH v3 19/19] tools: Use a single target-independent config to enable OpenSSL
Heiko Thiery
- [PATCH v3 19/20] env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVM
Kishon Vijay Abraham I
- [PATCH v3 19/20] env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVM
Tom Rini
- [Patch V3 19/44] arm: imx8ulp: Enable full L2 cache in SPL
Peng Fan (OSS)
- [Patch V3 19/44] arm: imx8ulp: Enable full L2 cache in SPL
sbabic at denx.de
- [PATCH v3 2/2] arm: imx8m: add support for Advantech RSB-3720
Ying-Chun Liu
- [PATCH v3 2/2] cmd: pinmux: support pin name in status command
Tom Rini
- [PATCH v3 2/2] efi_loader: clear OsIndications
Heinrich Schuchardt
- [PATCH v3 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
Frieder Schrempf
- [PATCH v3 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
sbabic at denx.de
- [PATCH v3 2/3] Azure: Add fuse device for test.py tests
Tom Rini
- [PATCH v3 2/3] net: xilinx: axi_mrmac: Add MRMAC driver
Ashok Reddy Soma
- [PATCH v3 2/3] test/py: rewrite sqfsload command test suite
Joao Marcos Costa
- [PATCH v3 2/3] test/py: rewrite sqfsload command test suite
Simon Glass
- [PATCH v3 2/3] test/py: rewrite sqfsload command test suite
Tom Rini
- [PATCH v3 2/4] usb: xhci-pci: Move reset logic out of XHCI core
Andre Przywara
- [PATCH v3 2/5] arm/dts: k3-j7200-r5-common: Add pmic lp876441 node
Gowtham Tammana
- [PATCH v3 2/5] arm/dts: k3-j7200-r5-common: Add pmic lp876441 node
Grygorii Strashko
- [PATCH v3 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
Patrick Delaunay
- [PATCH v3 2/6] cmd: printf: import busybox-1.33.1 printf.c
Roland Gaudig
- [PATCH v3 2/6] cmd: printf: import busybox-1.33.1 printf.c
Simon Glass
- [PATCH v3 2/6] cmd: printf: import busybox-1.33.1 printf.c
Roland Gaudig (OSS)
- [PATCH v3 2/6] cmd: printf: import busybox-1.33.1 printf.c
Simon Glass
- [PATCH v3 2/6] mmc: zynq_sdhci: Allow configuring zero Tap values
Ashok Reddy Soma
- [PATCH v3 2/6] mmc: zynq_sdhci: Allow configuring zero Tap values
Jaehoon Chung
- [PATCH v3 2/6] net: eth-phy: use dev_dbg and log_notice
Patrick Delaunay
- [PATCH v3 2/6] net: eth-phy: use dev_dbg and log_notice
Ramon Fried
- [PATCH v3 2/7] doc: Expand SPL docs to explain the phase and config
Simon Glass
- [PATCH v3 2/7] mmc: sdhci: Change prototype of set_delay to return errors
Ashok Reddy Soma
- [PATCH v3 2/8] configs: synquacer: Make U-Boot binary position independent
Masami Hiramatsu
- [PATCH v3 2/8] configs: synquacer: Make U-Boot binary position independent
Tom Rini
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Teresa Remmet
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Tim Harvey
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Heiko Schocher
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
sbabic at denx.de
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
sbabic at denx.de
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Tim Harvey
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Simon Glass
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Tim Harvey
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Simon Glass
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Heiko Schocher
- [PATCH v3 2/9] arm: dts: imx8mp: Add common u-boot dtsi
Heiko Schocher
- [PATCH v3 2/9] board: freescale: ls1021aqds: Update I2C mux config
Stephen Carlson
- [Patch V3 20/44] arm: imx8ulp: disable wdog3
Peng Fan (OSS)
- [Patch V3 20/44] arm: imx8ulp: disable wdog3
sbabic at denx.de
- [Patch V3 21/44] arm: imx8ulp: Update the reset vector in u-boot
Peng Fan (OSS)
- [Patch V3 21/44] arm: imx8ulp: Update the reset vector in u-boot
sbabic at denx.de
- [Patch V3 22/44] drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6
Peng Fan (OSS)
- [Patch V3 22/44] drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6
sbabic at denx.de
- [Patch V3 23/44] drivers: misc: imx8ulp: Add S400 API for image authentication
Peng Fan (OSS)
- [Patch V3 23/44] drivers: misc: imx8ulp: Add S400 API for image authentication
sbabic at denx.de
- [Patch V3 24/44] drivers: misc: imx8ulp: Update S400 API for release RDC
Peng Fan (OSS)
- [Patch V3 24/44] drivers: misc: imx8ulp: Update S400 API for release RDC
sbabic at denx.de
- [Patch V3 25/44] drivers: misc: s400_api: Update API for fuse read and write
Peng Fan (OSS)
- [Patch V3 25/44] drivers: misc: s400_api: Update API for fuse read and write
sbabic at denx.de
- [Patch V3 26/44] arm: imx8ulp: release and configure XRDC at early phase
Peng Fan (OSS)
- [Patch V3 26/44] arm: imx8ulp: release and configure XRDC at early phase
sbabic at denx.de
- [Patch V3 27/44] arm: imx8ulp: add rdc support
Peng Fan (OSS)
- [Patch V3 27/44] arm: imx8ulp: add rdc support
sbabic at denx.de
- [Patch V3 28/44] arm: imx8ulp: add trdc release request
Peng Fan (OSS)
- [Patch V3 28/44] arm: imx8ulp: add trdc release request
sbabic at denx.de
- [Patch V3 29/44] arm: imx8ulp: release trdc and assign lpav from RTD to APD
Peng Fan (OSS)
- [Patch V3 29/44] arm: imx8ulp: release trdc and assign lpav from RTD to APD
sbabic at denx.de
- [PATCH v3 3/3] Azure: Add loop devices and CAP_SYS_ADMIN for sandbox test.py tests
Tom Rini
- [PATCH v3 3/3] test/py: rewrite sqfsls command test suite
Joao Marcos Costa
- [PATCH v3 3/3] test/py: rewrite sqfsls command test suite
Simon Glass
- [PATCH v3 3/3] test/py: rewrite sqfsls command test suite
Tom Rini
- [PATCH v3 3/3] xilinx: versal: Enable Xilinx AXI MRMAC
Ashok Reddy Soma
- [PATCH v3 3/4] NSA310S : Use Ethernet PHY name from device tree
Tony Dinh
- [PATCH v3 3/4] NSA310S : Use Ethernet PHY name from device tree
Tony Dinh
- [PATCH v3 3/4] NSA310S : Use Ethernet PHY name from device tree
Stefan Roese
- [PATCH v3 3/4] NSA310S : Use Ethernet PHY name from device tree
Stefan Roese
- [PATCH v3 3/4] usb: xhci-dwc3: Add support for clocks/resets
Andre Przywara
- [PATCH v3 3/5] arm/dts: k3-j7200-r5-common: Add VTM node
Gowtham Tammana
- [PATCH v3 3/5] arm: stm32mp: add defconfig for trusted boot with FIP
Patrick Delaunay
- [PATCH v3 3/6] cmd: printf: add helper functions from busybox
Roland Gaudig
- [PATCH v3 3/6] mmc: zynq_sdhci: Use Mask writes for Tap delays
Ashok Reddy Soma
- [PATCH v3 3/6] mmc: zynq_sdhci: Use Mask writes for Tap delays
Jaehoon Chung
- [PATCH v3 3/6] net: eth-phy: manage subnode mdio0
Patrick Delaunay
- [PATCH v3 3/6] net: eth-phy: manage subnode mdio0
Ramon Fried
- [PATCH v3 3/7] test: Tidy up test building with SPL
Simon Glass
- [PATCH v3 3/7] zynqmp_firmware: Add zynqmp firmware related enums
Ashok Reddy Soma
- [PATCH v3 3/8] dts: synquacer: Add partition information to the spi-nor
Masami Hiramatsu
- [PATCH v3 3/8] dts: synquacer: Add partition information to the spi-nor
Tom Rini
- [PATCH v3 3/9] arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
Teresa Remmet
- [PATCH v3 3/9] arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
sbabic at denx.de
- [PATCH v3 3/9] arm: dts: imx8mp-phyboard-pollux: Sync dts files with kernel
sbabic at denx.de
- [PATCH v3 3/9] board: freescale: ls1043aqds: Update I2C mux config
Stephen Carlson
- [Patch V3 30/44] imx8ulp: unify rdc functions
Peng Fan (OSS)
- [Patch V3 30/44] imx8ulp: unify rdc functions
sbabic at denx.de
- [Patch V3 31/44] arm: imx8ulp: Probe the S400 MU device in arch init
Peng Fan (OSS)
- [Patch V3 31/44] arm: imx8ulp: Probe the S400 MU device in arch init
sbabic at denx.de
- [Patch V3 32/44] arm: iMX8ULP: Add boot device relevant functions
Peng Fan (OSS)
- [Patch V3 32/44] arm: iMX8ULP: Add boot device relevant functions
sbabic at denx.de
- [Patch V3 33/44] arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain
Peng Fan (OSS)
- [Patch V3 33/44] arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain
sbabic at denx.de
- [Patch V3 34/44] arm: imx8ulp: add dummy imx_get_mac_from_fuse
Peng Fan (OSS)
- [Patch V3 34/44] arm: imx8ulp: add dummy imx_get_mac_from_fuse
sbabic at denx.de
- [Patch V3 35/44] arm: imx8ulp: add iomuxc support
Peng Fan (OSS)
- [Patch V3 35/44] arm: imx8ulp: add iomuxc support
sbabic at denx.de
- [Patch V3 36/44] driver: misc: imx8ulp: Add fuse driver for imx8ulp
Peng Fan (OSS)
- [Patch V3 36/44] driver: misc: imx8ulp: Add fuse driver for imx8ulp
sbabic at denx.de
- [Patch V3 37/44] imx8ulp: soc: correct reset cause
Peng Fan (OSS)
- [Patch V3 37/44] imx8ulp: soc: correct reset cause
sbabic at denx.de
- [Patch V3 38/44] imx8ulp: Use DGO_GP5 to get boot config
Peng Fan (OSS)
- [Patch V3 38/44] imx8ulp: Use DGO_GP5 to get boot config
sbabic at denx.de
- [Patch V3 39/44] imx8ulp: Add workaround for eMMC boot
Peng Fan (OSS)
- [Patch V3 39/44] imx8ulp: Add workaround for eMMC boot
sbabic at denx.de
- [PATCH v3 4/4] configs: Enable USB3 on Allwinner H6 boards
Andre Przywara
- [PATCH v3 4/5] arm/dts: k3-j7200-r5-common: Hook buck1_reg to vtm supply
Gowtham Tammana
- [PATCH v3 4/5] doc: st: stm32mp1: Add FIP support for trusted boot
Patrick Delaunay
- [PATCH v3 4/6] cmd: setexpr: add format string handling
Roland Gaudig
- [PATCH v3 4/6] cmd: setexpr: add format string handling
Simon Glass
- [PATCH v3 4/6] mmc: zynq_sdhci: Split set_tapdelay function to in and out
Ashok Reddy Soma
- [PATCH v3 4/6] mmc: zynq_sdhci: Split set_tapdelay function to in and out
Jaehoon Chung
- [PATCH v3 4/6] net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv
Patrick Delaunay
- [PATCH v3 4/6] net: dwc_eth_qos: remove the field phyaddr of the struct eqos_priv
Ramon Fried
- [PATCH v3 4/7] mmc: zynq_sdhci: Add xilinx_pm_request() method to set tapdelays
Ashok Reddy Soma
- [PATCH v3 4/7] spl: Move TPL_HASH_SUPPORT down next to other TPL options
Simon Glass
- [PATCH v3 4/8] configs: synquacer: Remove mtdparts settings and update DFU setting
Masami Hiramatsu
- [PATCH v3 4/8] configs: synquacer: Remove mtdparts settings and update DFU setting
Tom Rini
- [PATCH v3 4/9] board: freescale: ls1046a: Update I2C mux config
Stephen Carlson
- [PATCH v3 4/9] board: phytec: phycore_imx8mp: Change debug UART
Teresa Remmet
- [PATCH v3 4/9] board: phytec: phycore_imx8mp: Change debug UART
sbabic at denx.de
- [PATCH v3 4/9] board: phytec: phycore_imx8mp: Change debug UART
sbabic at denx.de
- [Patch V3 40/44] imx8ulp: move struct mu_type to common header
Peng Fan (OSS)
- [Patch V3 40/44] imx8ulp: move struct mu_type to common header
sbabic at denx.de
- [Patch V3 41/44] imx8ulp: add upower api support
Peng Fan (OSS)
- [Patch V3 41/44] imx8ulp: add upower api support
sbabic at denx.de
- [Patch V3 42/44] ddr: Add DDR driver for iMX8ULP
Peng Fan (OSS)
- [Patch V3 42/44] ddr: Add DDR driver for iMX8ULP
sbabic at denx.de
- [Patch V3 43/44] arm: dts: add i.MX8ULP dtsi
Peng Fan (OSS)
- [Patch V3 43/44] arm: dts: add i.MX8ULP dtsi
sbabic at denx.de
- [Patch V3 44/44] arm: imx: add i.MX8ULP EVK support
Peng Fan (OSS)
- [Patch V3 44/44] arm: imx: add i.MX8ULP EVK support
sbabic at denx.de
- [PATCH v3 5/5] configs: j7200_evm_r5_defconfig: Enable AVS, PMIC and dependent configs
Gowtham Tammana
- [PATCH v3 5/5] stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP
Patrick Delaunay
- [PATCH v3 5/6] doc: usage: add description for setexpr command
Roland Gaudig
- [PATCH v3 5/6] doc: usage: add description for setexpr command
Simon Glass
- [PATCH v3 5/6] mmc: zynq_sdhci: Fix kernel doc warnings
Ashok Reddy Soma
- [PATCH v3 5/6] mmc: zynq_sdhci: Fix kernel doc warnings
Jaehoon Chung
- [PATCH v3 5/6] net: dwc_eth_qos: use generic ethernet phy for stm32 variant
Patrick Delaunay
- [PATCH v3 5/6] net: dwc_eth_qos: use generic ethernet phy for stm32 variant
Ramon Fried
- [PATCH v3 5/7] binman: Add VPL support
Simon Glass
- [PATCH v3 5/7] mmc: zynq_sdhci: Move setting tapdelay code to driver
Ashok Reddy Soma
- [PATCH v3 5/8] configs: synquacer: Drop Ext2/4 support by default
Masami Hiramatsu
- [PATCH v3 5/8] configs: synquacer: Drop Ext2/4 support by default
Tom Rini
- [PATCH v3 5/9] board: freescale: ls1088a: Update I2C mux config
Stephen Carlson
- [PATCH v3 5/9] board: phytec: phycore_imx8mp: Add fec support
Teresa Remmet
- [PATCH v3 5/9] board: phytec: phycore_imx8mp: Add fec support
sbabic at denx.de
- [PATCH v3 5/9] board: phytec: phycore_imx8mp: Add fec support
sbabic at denx.de
- [PATCH v3 6/6] mmc: zynq_sdhci: Make variables/structure static
Ashok Reddy Soma
- [PATCH v3 6/6] mmc: zynq_sdhci: Make variables/structure static
Jaehoon Chung
- [PATCH v3 6/6] net: dwc: add a common empty ops eqos_null_ops
Patrick Delaunay
- [PATCH v3 6/6] net: dwc: add a common empty ops eqos_null_ops
Ramon Fried
- [PATCH v3 6/6] test: cmd: setexpr: add format string tests
Roland Gaudig
- [PATCH v3 6/6] test: cmd: setexpr: add format string tests
Simon Glass
- [PATCH v3 6/7] Introduce Verifying Program Loader (VPL)
Simon Glass
- [PATCH v3 6/7] mmc: zynq_sdhci: Wait till sd card detect state is stable
Ashok Reddy Soma
- [PATCH v3 6/8] configs: synquacer: Enable UEFI secure boot
Masami Hiramatsu
- [PATCH v3 6/8] configs: synquacer: Enable UEFI secure boot
Tom Rini
- [PATCH v3 6/9] board: freescale: ls2080: Update I2C mux config
Stephen Carlson
- [PATCH v3 6/9] board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
Teresa Remmet
- [PATCH v3 6/9] board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
sbabic at denx.de
- [PATCH v3 6/9] board: phytec: phycore_imx8mp: Set VDD_ARM to 0,95V
sbabic at denx.de
- [PATCH v3 7/7] mmc: zynq_sdhci: Use set_control_reg from sdhci.c
Ashok Reddy Soma
- [PATCH v3 7/7] vpl: Add Kconfig options for VPL
Simon Glass
- [PATCH v3 7/8] configs: synquacer: Use RAW capsule image instead of FIT
Masami Hiramatsu
- [PATCH v3 7/8] configs: synquacer: Use RAW capsule image instead of FIT
Tom Rini
- [PATCH v3 7/9] board: freescale: lx2160a: Update I2C mux config
Stephen Carlson
- [PATCH v3 7/9] board: phytec: phycore-imx8mp: Enable DVS1 control
Teresa Remmet
- [PATCH v3 7/9] board: phytec: phycore-imx8mp: Enable DVS1 control
sbabic at denx.de
- [PATCH v3 7/9] board: phytec: phycore-imx8mp: Enable DVS1 control
sbabic at denx.de
- [PATCH v3 8/8] configs: synquacer: Ignore OsIndications on DeveloperBox
Masami Hiramatsu
- [PATCH v3 8/8] configs: synquacer: Ignore OsIndications on DeveloperBox
Tom Rini
- [PATCH v3 8/8] test: add first autoboot unit tests
Steffen Jaeckel
- [PATCH v3 8/8] test: add first autoboot unit tests
Simon Glass
- [PATCH v3 8/9] arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
Teresa Remmet
- [PATCH v3 8/9] arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
sbabic at denx.de
- [PATCH v3 8/9] arm: dts: imx8mp-phyboard-pollux-rdk-u-boot: Add wdog pinctrl entry
sbabic at denx.de
- [PATCH v3 8/9] board: freescale: t2080qds: Update I2C mux config
Stephen Carlson
- [PATCH v3 9/9] board: freescale: ls2088a: Update I2C mux config
Stephen Carlson
- [PATCH v3 9/9] board: phytec: imx8mp-phycore: Switch to binman
Teresa Remmet
- [PATCH v3 9/9] board: phytec: imx8mp-phycore: Switch to binman
sbabic at denx.de
- [PATCH v3 9/9] board: phytec: imx8mp-phycore: Switch to binman
sbabic at denx.de
- [PATCH v3] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
chenguanqiao
- [PATCH v3] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
Simon Glass
- [PATCH v3] dm: core: fix no null pointer detection in ofnode_get_addr_size_index()
Simon Glass
- [PATCH v3] qemu-riscv64_smode: fix extlinux (define preboot)
Dimitri John Ledkov
- [PATCH v3] qemu-riscv64_smode: fix extlinux (define preboot)
Leo Liang
- [PATCH v3] sandbox: cros-ec: Add tests for the Chromium OS EC PWM driver
Simon Glass
- [PATCH v3] serial: pl011: Enable DEBUG_UART_PL011 in SPL
Chen Baozi
- [PATCH v3] serial: pl011: Enable DEBUG_UART_PL011 in SPL
Simon Glass
- [PATCH v3] serial: pl011: Enable DEBUG_UART_PL011 in SPL
Tom Rini
- [PATCH v4 0/5] Add SIMATIC IOT2050 board support
Jan Kiszka
- [PATCH v4 0/5] stm32mp: Enable OP-TEE and TZC support in SPL
Alex G.
- [PATCH v4 0/5] stm32mp: Enable OP-TEE and TZC support in SPL
Tom Rini
- [PATCH v4 0/5] stm32mp: Enable OP-TEE and TZC support in SPL
Alex G.
- [PATCH v4 0/8] common: Introduce crypt-style password support
Steffen Jaeckel
- [PATCH v4 00/18] am335x, guardian: update board specific changes
Lokesh Vutla
- [PATCH v4 00/21] TI/Cadence: Add Sierra/Torrent SERDES driver
Kishon Vijay Abraham I
- [PATCH V4 00/44] imx: add i.MX8ULP support
Peng Fan (OSS)
- [PATCH v4 01/21] drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl"
Kishon Vijay Abraham I
- [PATCH v4 01/21] drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl"
Simon Glass
- [PATCH v4 01/21] drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl"
Kishon Vijay Abraham I
- [PATCH v4 01/21] drivers: reset: Add devm_to_reset() to return dummy "struct reset_ctl"
Simon Glass
- [PATCH V4 01/44] arm: imx: add i.MX8ULP basic Kconfig option
Peng Fan (OSS)
- [PATCH v4 02/21] dm: core: Add helper to compare node names
Kishon Vijay Abraham I
- [PATCH V4 02/44] arm: imx: add i.MX8ULP cpu type and helper
Peng Fan (OSS)
- [PATCH v4 03/21] dm: test: Add test case to check node name ignoring unit address
Kishon Vijay Abraham I
- [PATCH V4 03/44] arm: imx: sys_proto: move boot mode define to common header
Peng Fan (OSS)
- [PATCH v4 04/21] dt-bindings: phy: Add definitions for additional phy types
Kishon Vijay Abraham I
- [PATCH V4 04/44] arm: imx8ulp: support print cpu info
Peng Fan (OSS)
- [PATCH v4 05/21] dt-bindings: phy: Add defines for AM64 SERDES Wrapper
Kishon Vijay Abraham I
- [PATCH V4 05/44] imx: imx8ulp: add get reset cause
Peng Fan (OSS)
- [PATCH v4 06/21] dt-bindings: phy: cadence-torrent: Add defines for refclk driver
Kishon Vijay Abraham I
- [PATCH V4 06/44] arm: imx: basic i.MX8ULP support
Peng Fan (OSS)
- [PATCH v4 07/21] dt-bindings: ti-serdes-mux: Add defines for AM64 SoC
Kishon Vijay Abraham I
- [PATCH V4 07/44] arm: imx8: Move container parser and image to mach-imx common folder
Peng Fan (OSS)
- [PATCH v4 08/21] phy: cadence: Add driver for Sierra PHY
Kishon Vijay Abraham I
- [PATCH V4 08/44] arm: imx8: Move container image header file to mach-imx
Peng Fan (OSS)
- [PATCH v4 09/21] phy: cadence: Add driver for Torrent SERDES
Kishon Vijay Abraham I
- [PATCH V4 09/44] arm: imx: parse-container: guard included header files
Peng Fan (OSS)
- [PATCH v4 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Frieder Schrempf
- [PATCH v4 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Tom Rini
- [PATCH v4 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Frieder Schrempf
- [PATCH v4 1/2] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Michael Walle
- [PATCH v4 1/3] reboot-mode: add support for reboot mode control
Tom Rini
- [PATCH v4 1/5] arm: dts: Add IOT2050 device tree files
Jan Kiszka
- [PATCH v4 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode
Patrick DELAUNAY
- [PATCH v4 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode
Alex G.
- [PATCH v4 1/8] lib: add crypt subsystem
Steffen Jaeckel
- [PATCH v4 1/8] lib: add crypt subsystem
Heiko Schocher
- [PATCH v4 1/8] lib: add crypt subsystem
Steffen Jaeckel
- [PATCH v4 1/8] lib: add crypt subsystem
Heiko Schocher
- [PATCH v4 10/21] phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
Kishon Vijay Abraham I
- [PATCH V4 10/44] arm: imx8ulp: add container support
Peng Fan (OSS)
- [PATCH v4 11/21] board: ti: j721e: Add support for probing and configuring Torrent serdes on J7200
Kishon Vijay Abraham I
- [PATCH V4 11/44] arm: imx: move container Kconfig under mach-imx
Peng Fan (OSS)
- [PATCH v4 12/21] ARM: dts: k3-j721e: Add support for USB3 in USB0 instance
Kishon Vijay Abraham I
- [PATCH V4 12/44] driver: misc: Add MU and S400 API to communicate with Sentinel
Peng Fan (OSS)
- [PATCH v4 13/21] arm: dts: k3-j7200-main: Add DT node for torrent serdes
Kishon Vijay Abraham I
- [PATCH V4 13/44] net: fec_mxc: support i.MX8ULP
Peng Fan (OSS)
- [PATCH v4 14/21] arm: dts: k3-j7200-common-proc-board: Enable SERDES DT
Kishon Vijay Abraham I
- [PATCH V4 14/44] pinctrl: Add pinctrl driver for imx8ulp
Peng Fan (OSS)
- [PATCH v4 15/21] arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for torrent serdes
Kishon Vijay Abraham I
- [PATCH V4 15/44] driver: serial: fsl_lpuart: support i.MX8ULP
Peng Fan (OSS)
- [PATCH v4 16/21] configs: j721e_evm_a72: Enable the drivers required for the USB3 support
Kishon Vijay Abraham I
- [PATCH V4 16/44] arm: imx8ulp: add clock support
Peng Fan (OSS)
- [PATCH v4 17/21] configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common clock framework
Kishon Vijay Abraham I
- [PATCH V4 17/44] drivers: mmc: fsl_esdhc_imx: support i.MX8ULP
Peng Fan (OSS)
- [PATCH v4 18/21] env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVM
Kishon Vijay Abraham I
- [PATCH V4 18/44] arm: imx8ulp: soc: Change to use CMC1 to get bootcfg
Peng Fan (OSS)
- [PATCH v4 19/21] configs: j7200_evm_a72: Add CONFIG_PREBOOT to configure ethernet PHY
Kishon Vijay Abraham I
- [PATCH V4 19/44] arm: imx8ulp: Enable full L2 cache in SPL
Peng Fan (OSS)
- [PATCH v4 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
Frieder Schrempf
- [PATCH v4 2/2] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
Michael Walle
- [PATCH v4 2/3] reboot-mode: read the boot mode from GPIOs status
Tom Rini
- [PATCH v4 2/5] board: siemens: Add support for SIMATIC IOT2050 devices
Jan Kiszka
- [PATCH v4 2/8] lib: wrap crypt API to hide errno usage
Steffen Jaeckel
- [PATCH v4 2/8] lib: wrap crypt API to hide errno usage
Heiko Schocher
- [PATCH v4 20/21] doc: board: Move j721e document to doc/board/ti/ directory
Kishon Vijay Abraham I
- [PATCH v4 20/21] doc: board: Move j721e document to doc/board/ti/ directory
Tom Rini
- [PATCH v4 20/21] doc: board: Move j721e document to doc/board/ti/ directory
Kishon Vijay Abraham I
- [PATCH V4 20/44] arm: imx8ulp: disable wdog3
Peng Fan (OSS)
- [PATCH v4 21/21] doc: board: j721e_evm: Add documentation for firmware loading
Kishon Vijay Abraham I
- [PATCH V4 21/44] arm: imx8ulp: Update the reset vector in u-boot
Peng Fan (OSS)
- [PATCH V4 22/44] drivers: misc: s400_api: Update S400_SUCCESS_IND to 0xd6
Peng Fan (OSS)
- [PATCH V4 23/44] drivers: misc: imx8ulp: Add S400 API for image authentication
Peng Fan (OSS)
- [PATCH V4 24/44] drivers: misc: imx8ulp: Update S400 API for release RDC
Peng Fan (OSS)
- [PATCH V4 25/44] drivers: misc: s400_api: Update API for fuse read and write
Peng Fan (OSS)
- [PATCH V4 26/44] arm: imx8ulp: release and configure XRDC at early phase
Peng Fan (OSS)
- [PATCH V4 27/44] arm: imx8ulp: add rdc support
Peng Fan (OSS)
- [PATCH V4 28/44] arm: imx8ulp: add trdc release request
Peng Fan (OSS)
- [PATCH V4 29/44] arm: imx8ulp: release trdc and assign lpav from RTD to APD
Peng Fan (OSS)
- [PATCH v4 3/3] reboot-mode: read the boot mode from RTC memory
Simon Glass
- [PATCH v4 3/3] reboot-mode: read the boot mode from RTC memory
Nandor Han
- [PATCH v4 3/3] reboot-mode: read the boot mode from RTC memory
Tom Rini
- [PATCH v4 3/5] arm64: dts: ti: k3-am65-mcu: Add RTI watchdog entry
Jan Kiszka
- [PATCH v4 3/8] common: integrate crypt-based passwords
Steffen Jaeckel
- [PATCH v4 3/8] common: integrate crypt-based passwords
Heiko Schocher
- [PATCH V4 30/44] imx8ulp: unify rdc functions
Peng Fan (OSS)
- [PATCH V4 31/44] arm: imx8ulp: Probe the S400 MU device in arch init
Peng Fan (OSS)
- [PATCH V4 32/44] arm: iMX8ULP: Add boot device relevant functions
Peng Fan (OSS)
- [PATCH V4 33/44] arm: imx8ulp: Allocate DCNANO and MIPI_DSI to AD domain
Peng Fan (OSS)
- [PATCH V4 34/44] arm: imx8ulp: add dummy imx_get_mac_from_fuse
Peng Fan (OSS)
- [PATCH V4 35/44] arm: imx8ulp: add iomuxc support
Peng Fan (OSS)
- [PATCH V4 36/44] driver: misc: imx8ulp: Add fuse driver for imx8ulp
Peng Fan (OSS)
- [PATCH V4 37/44] imx8ulp: soc: correct reset cause
Peng Fan (OSS)
- [PATCH V4 38/44] imx8ulp: Use DGO_GP5 to get boot config
Peng Fan (OSS)
- [PATCH V4 39/44] imx8ulp: Add workaround for eMMC boot
Peng Fan (OSS)
- [PATCH v4 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE
Patrice CHOTARD
- [PATCH v4 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE
Patrick DELAUNAY
- [PATCH v4 4/5] watchdog: rti_wdt: Add support for loading firmware
Jan Kiszka
- [PATCH v4 4/8] common: Rename macro appropriately
Steffen Jaeckel
- [PATCH v4 4/8] common: Rename macro appropriately
Heiko Schocher
- [PATCH V4 40/44] imx8ulp: move struct mu_type to common header
Peng Fan (OSS)
- [PATCH V4 41/44] imx8ulp: add upower api support
Peng Fan (OSS)
- [PATCH V4 42/44] ddr: Add DDR driver for iMX8ULP
Peng Fan (OSS)
- [PATCH V4 43/44] arm: dts: add i.MX8ULP dtsi
Peng Fan (OSS)
- [PATCH V4 44/44] arm: imx: add i.MX8ULP EVK support
Peng Fan (OSS)
- [PATCH v4 5/5] iot2050: Enable watchdog support, but do not auto-start it
Jan Kiszka
- [PATCH v4 5/8] common: allow disabling of timeout for password entry
Steffen Jaeckel
- [PATCH v4 6/8] common: add AUTOBOOT_FLUSH_STDIN option
Steffen Jaeckel
- [PATCH v4 7/8] common: add support to fallback to plain SHA256
Steffen Jaeckel
- [PATCH v4 8/8] test: add first autoboot unit tests
Steffen Jaeckel
- [PATCH v4] armv8: Handle EL2 Host mode
Tom Rini
- [PATCHv4] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11
Tom Rini
- [PATCHv4] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11
Bin Meng
- [PATCHv4] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11
Tom Rini
- [PATCHv4] Azure/GitLab: Move to gcc-11.1.0 and LLVM-11
Tom Rini
- [PATCH v5,1/2] driver: watchdog: reset watchdog in designware_wdt_stop() function
Stefan Roese
- [PATCH v5,2/2] arm: socfpga: socfpga_stratix10: enable wdt command by default
Stefan Roese
- [PATCH v5 0/5] stm32mp: Enable OP-TEE and TZC support in SPL
Alexandru Gagniuc
- [PATCH v5 0/5] stm32mp: Enable OP-TEE and TZC support in SPL
Alex G.
- [PATCH v5 0/8] common: Introduce crypt-style password support
Steffen Jaeckel
- [PATCH v5 00/20] TI/Cadence: Add Sierra/Torrent SERDES driver
Kishon Vijay Abraham I
- [PATCH v5 00/20] TI/Cadence: Add Sierra/Torrent SERDES driver
Lokesh Vutla
- [PATCH v5 01/13] ata: ahci-pci: Use scsi_ops to initialize ops
Tom Rini
- [PATCH v5 01/13] ata: ahci-pci: Use scsi_ops to initialize ops
Masami Hiramatsu
- [PATCH v5 01/20] dm: core: Add helper to compare node names
Kishon Vijay Abraham I
- [PATCH v5 01/20] dm: core: Add helper to compare node names
Simon Glass
- [PATCH v5 02/20] dm: test: Add test case to check node name ignoring unit address
Kishon Vijay Abraham I
- [PATCH v5 03/20] dt-bindings: phy: Add definitions for additional phy types
Kishon Vijay Abraham I
- [PATCH v5 04/20] dt-bindings: phy: Add defines for AM64 SERDES Wrapper
Kishon Vijay Abraham I
- [PATCH v5 05/20] dt-bindings: phy: cadence-torrent: Add defines for refclk driver
Kishon Vijay Abraham I
- [PATCH v5 06/20] dt-bindings: ti-serdes-mux: Add defines for AM64 SoC
Kishon Vijay Abraham I
- [PATCH v5 07/20] phy: cadence: Add driver for Sierra PHY
Kishon Vijay Abraham I
- [PATCH v5 08/20] phy: cadence: Add driver for Torrent SERDES
Kishon Vijay Abraham I
- [PATCH v5 09/20] phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC
Kishon Vijay Abraham I
- [PATCH v5 1/4] rockchip: rk3066: add grf header file
Johan Jonker
- [PATCH v5 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode
Alexandru Gagniuc
- [PATCH v5 1/5] spl: mmc: Support OP-TEE payloads in Falcon mode
Patrick DELAUNAY
- [PATCH v5 1/8] lib: add crypt subsystem
Steffen Jaeckel
- [PATCH v5 1/8] lib: add crypt subsystem
Tom Rini
- [PATCH v5 10/20] board: ti: j721e: Add support for probing and configuring Torrent serdes on J7200
Kishon Vijay Abraham I
- [PATCH v5 11/20] ARM: dts: k3-j721e: Add support for USB3 in USB0 instance
Kishon Vijay Abraham I
- [PATCH v5 12/20] arm: dts: k3-j7200-main: Add DT node for torrent serdes
Kishon Vijay Abraham I
- [PATCH v5 13/20] arm: dts: k3-j7200-common-proc-board: Enable SERDES DT
Kishon Vijay Abraham I
- [PATCH v5 14/20] arm: dts: k3-j7200-common-proc-board-u-boot: Add u-boot tags for torrent serdes
Kishon Vijay Abraham I
- [PATCH v5 15/20] configs: j721e_evm_a72_defconfig: Enable the drivers required for the USB3 support
Kishon Vijay Abraham I
- [PATCH v5 16/20] configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common clock framework
Kishon Vijay Abraham I
- [PATCH v5 17/20] env: ti: j721e-evm: Add env variable to power on & reset QSGMII PHY in J7200 EVM
Kishon Vijay Abraham I
- [PATCH v5 18/20] configs: j7200_evm_a72: Add CONFIG_PREBOOT to configure ethernet PHY
Kishon Vijay Abraham I
- [PATCH v5 19/20] doc: board: Move j721e document to doc/board/ti/ directory
Kishon Vijay Abraham I
- [PATCH v5 2/4] rockchip: rk3066: add clock driver for rk3066 soc
Johan Jonker
- [PATCH v5 2/5] spl: Introduce spl_board_prepare_for_optee() hook
Alexandru Gagniuc
- [PATCH v5 2/5] spl: Introduce spl_board_prepare_for_optee() hook
Patrick DELAUNAY
- [PATCH v5 2/8] lib: wrap crypt API to hide errno usage
Steffen Jaeckel
- [PATCH v5 2/8] lib: wrap crypt API to hide errno usage
Tom Rini
- [PATCH v5 20/20] doc: board: j721e_evm: Add documentation for firmware loading
Kishon Vijay Abraham I
- [PATCH v5 3/5] arm: stm32mp: Implement support for TZC 400 controller
Alexandru Gagniuc
- [PATCH v5 3/5] arm: stm32mp: Implement support for TZC 400 controller
Patrick DELAUNAY
- [PATCH v5 3/8] common: integrate crypt-based passwords
Steffen Jaeckel
- [PATCH v5 3/8] common: integrate crypt-based passwords
Tom Rini
- [PATCH v5 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE
Alexandru Gagniuc
- [PATCH v5 4/5] stm32mp1: spl: Configure TrustZone controller for OP-TEE
Patrick DELAUNAY
- [PATCH v5 4/8] common: Rename macro appropriately
Steffen Jaeckel
- [PATCH v5 4/8] common: Rename macro appropriately
Tom Rini
- [PATCH v5 5/5] ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb
Alexandru Gagniuc
- [PATCH v5 5/5] ARM: dts: stm32mp: Add OP-TEE reserved memory to SPL dtb
Patrick DELAUNAY
- [PATCH v5 5/5] test: dm: Add test for ECDSA UCLASS support
Patrick DELAUNAY
- [PATCH v5 5/8] common: allow disabling of timeout for password entry
Steffen Jaeckel
- [PATCH v5 5/8] common: allow disabling of timeout for password entry
Tom Rini
- [PATCH v5 6/8] common: add AUTOBOOT_FLUSH_STDIN option
Steffen Jaeckel
- [PATCH v5 6/8] common: add AUTOBOOT_FLUSH_STDIN option
Tom Rini
- [PATCH v5 7/8] common: add support to fallback to plain SHA256
Steffen Jaeckel
- [PATCH v5 7/8] common: add support to fallback to plain SHA256
Tom Rini
- [PATCH v5 8/8] test: add first autoboot unit tests
Steffen Jaeckel
- [PATCH v5 8/8] test: add first autoboot unit tests
Tom Rini
- [PATCH v6 0/4] Add basic support for rk3066 platform.
Paweł Jarosz
- [PATCH v6 0/5] of-platdata: Avoid building libfdt
Simon Glass
- [PATCH v6 0/5] of-platdata: Avoid building libfdt
Tom Rini
- [PATCH v6 0/5] of-platdata: Avoid building libfdt
Simon Glass
- [PATCH v6 0/5] of-platdata: Avoid building libfdt
Tom Rini
- [PATCH v6 0/5] of-platdata: Avoid building libfdt
Simon Glass
- [PATCH v6 0/5] of-platdata: Avoid building libfdt
Tom Rini
- [PATCH v6 1/4] rockchip: rk3066: add grf header file
Paweł Jarosz
- [PATCH v6 1/5] omap: mmc: Avoid using libfdt with of-platdata
Simon Glass
- [PATCH v6 1/5] spi: rockchip_sfc: add support for Rockchip SFC
Chris Morgan
- [PATCH v6 2/4] rockchip: rk3066: add clock driver for rk3066 soc
Paweł Jarosz
- [PATCH v6 2/4] rockchip: rk3066: add clock driver for rk3066 soc
Simon Glass
- [PATCH v6 2/4] rockchip: rk3066: add clock driver for rk3066 soc
Paweł Jarosz
- [PATCH v6 2/4] rockchip: rk3066: add clock driver for rk3066 soc
Simon Glass
- [PATCH v6 2/5] net: atheros: Add a check for OF_CONTROL
Simon Glass
- [PATCH v6 2/5] net: atheros: Add a check for OF_CONTROL
Ramon Fried
- [PATCH v6 3/4] rockchip: rk3066: add rk3066 pinctrl driver
Paweł Jarosz
- [PATCH v6 3/5] spi: Add checks for OF_CONTROL
Simon Glass
- [PATCH v6 4/4] rockchip: rk3066: add sdram driver
Paweł Jarosz
- [PATCH v6 4/5] mtd: spi-nor-ids: Add XTX XT25F128B
Chris Morgan
- [PATCH v6 4/5] spl: Allow SPL/TPL to use of-platdata without libfdt
Simon Glass
- [PATCH v6 5/5] dm: core: Don't include ofnode functions with of-platdata
Simon Glass
- [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210715
Patrick DELAUNAY
- [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210715
Tom Rini
- [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210727
Patrick DELAUNAY
- [PULL] Pull request for u-boot master / v2021.10 = u-boot-stm32-20210727
Tom Rini
- [PULL] u-boot-atmel-fixes-2021.10-a
Eugen.Hristev at microchip.com
- [PULL] u-boot-atmel-fixes-2021.10-a
Tom Rini
- [PULL] u-boot-mips
Daniel Schwierzeck
- [PULL] u-boot-mips
Tom Rini
- [PULL] u-boot-network/network_master
Ramon Fried
- [PULL] u-boot-network/network_master
Tom Rini
- [PULL] u-boot-riscv/master
Leo Liang
- [PULL] u-boot-riscv/master
Tom Rini
- [PULL] u-boot-riscv/master
Tianrui Wei
- [PULL] u-boot-riscv/master
Leo Liang
- [PULL] u-boot-riscv/master
Tom Rini
- [PULL] u-boot-riscv/master
Leo Liang
- [PULL] u-boot-riscv/master
Tom Rini
- [PULL] u-boot-sh/master
Marek Vasut
- [PULL] u-boot-sh/master
Tom Rini
- [PULL u-boot] Please pull u-boot-amlogic-20210703
Neil Armstrong
- [PULL u-boot] Please pull u-boot-amlogic-20210703
Tom Rini
- [PULL u-boot] Please pull u-boot-amlogic-20210727
Neil Armstrong
- [PULL u-boot] Please pull u-boot-amlogic-20210727
Tom Rini
- [RESEND PATCH 01/16] imx: ventana: ignore EEPROM config when checking for NAND support
Tim Harvey
- [RESEND PATCH 02/16] imx: ventana: move wdog/uhs-i board/revision dt fixups
Tim Harvey
- [RESEND PATCH 03/16] imx: ventana: remove nand field from common ventana struct
Tim Harvey
- [RESEND PATCH 04/16] imx: ventana: replace hard-coded LED config with dt based config
Tim Harvey
- [RESEND PATCH 05/16] imx: ventana: remove hard-coded USB HUBRST# gpio config
Tim Harvey
- [RESEND PATCH 06/16] imx: ventana: fix UMS support
Tim Harvey
- [RESEND PATCH 07/16] imx: ventana: remove hard-coded PCI reset
Tim Harvey
- [RESEND PATCH 08/16] imx: ventana: remove hard-coded USB OTG pinmux
Tim Harvey
- [RESEND PATCH 09/16] imx: ventana: remove hard-coded analog video codec enable
Tim Harvey
- [RESEND PATCH 1/3] net: eth-phy: define LOG_CATEGORY
Patrick Delaunay
- [RESEND PATCH 1/3] net: eth-phy: define LOG_CATEGORY
Ramon Fried
- [RESEND PATCH 1/6] mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
sbabic at denx.de
- [RESEND PATCH 1/6] mtd: spi-nor-ids: Add support for Macronix MX25V8035F and MX25R1635F
sbabic at denx.de
- [RESEND PATCH 10/16] imx: ventana: remove hard-coded flexcan standby pin
Tim Harvey
- [RESEND PATCH 11/16] imx: ventana: use dt for hwmon
Tim Harvey
- [RESEND PATCH 12/16] imx: ventana: add GW5910 support
Tim Harvey
- [RESEND PATCH 13/16] imx: ventana: add GW5912 support
Tim Harvey
- [RESEND PATCH 14/16] imx: ventana: add GW5913 support
Tim Harvey
- [RESEND PATCH 15/16] imx: ventana: add support for GW53xx-G revision
Tim Harvey
- [RESEND PATCH 16/16] imx: ventana: add support for GW54xx-G revision
Tim Harvey
- [RESEND PATCH 2/3] Marvell Sheevaplug: Use Ethernet PHY name and address from device tree
Tony Dinh
- [RESEND PATCH 2/3] net: dwc_eth_qos: define LOG_CATEGORY
Patrick Delaunay
- [RESEND PATCH 2/3] net: dwc_eth_qos: define LOG_CATEGORY
Ramon Fried
- [RESEND PATCH 2/6] spi: fsl_qspi: Build driver only if DM_SPI is available
sbabic at denx.de
- [RESEND PATCH 2/6] spi: fsl_qspi: Build driver only if DM_SPI is available
sbabic at denx.de
- [RESEND PATCH 3/3] net: define LOG_CATEGORY
Patrick Delaunay
- [RESEND PATCH 3/3] net: define LOG_CATEGORY
Ramon Fried
- [RESEND PATCH 3/6] clk: imx8mm: Add SPI clocks
sbabic at denx.de
- [RESEND PATCH 3/6] clk: imx8mm: Add SPI clocks
sbabic at denx.de
- [RESEND PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary
sbabic at denx.de
- [RESEND PATCH 4/6] imx8m: Restrict usable memory to space below 4G boundary
sbabic at denx.de
- [RESEND PATCH 5/6] imx: imx6ul: Add support for Kontron Electronics SL/BL i.MX6UL/ULL boards (N63xx/N64xx)
Stefano Babic
- [RESEND PATCH 6/6] imx: imx8mm: Add support for Kontron Electronics SL/BL i.MX8M-Mini boards (N801x)
Stefano Babic
- [RESEND PATCH] build: remove the variable NM in gen_ll_addressable_symbols.sh
Patrick Delaunay
- [RESEND PATCH] build: remove the variable NM in gen_ll_addressable_symbols.sh
Marek Behun
- [RESEND PATCH] build: remove the variable NM in gen_ll_addressable_symbols.sh
Tom Rini
- [RESEND PATCH v2 0/3] sunxi: Improve automatic eMMC boot partition support
Andre Przywara
- [RESEND PATCH v2 1/3] spl: mmc: extend spl_mmc_boot_mode() to take mmc argument
Andre Przywara
- [RESEND PATCH v2 1/3] spl: mmc: extend spl_mmc_boot_mode() to take mmc argument
Simon Glass
- [RESEND PATCH v2 2/3] sunxi: eMMC: Improve automatic boot source detection
Andre Przywara
- [RESEND PATCH v2 2/3] sunxi: eMMC: Improve automatic boot source detection
Jaehoon Chung
- [RESEND PATCH v2 2/3] sunxi: eMMC: Improve automatic boot source detection
Andre Przywara
- [RESEND PATCH v2 3/3] sunxi: defconfig: enable eMMC boot partition support
Andre Przywara
- [RESEND PATCH v3 3/4] NSA310S : Use Ethernet PHY name from device tree
Tony Dinh
- [RESEND RFC PATCH v1 6/6] arm: dts: rockchip: add rk3318 A95X Z2 board
Johan Jonker
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
Heinrich Schuchardt
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
Heinrich Schuchardt
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
Tom Rini
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
David Abdurachmanov
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
Tom Rini
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
Heinrich Schuchardt
- [RFC 1/1] board: sifive: unmatched: use zero copy for initrd
Tom Rini
- [RFC 1/7] ARM: mvebu: a38x: Correct mismatched bound warnings
Tom Rini
- [RFC 1/7] ARM: mvebu: a38x: Correct mismatched bound warnings
Pali Rohár
- [RFC 1/7] ARM: mvebu: a38x: Correct mismatched bound warnings
Stefan Roese
- [RFC 2/7] freescale: Drop unnecessary cpld_data_t non-typedef
Tom Rini
- [RFC 3/7] eb_cpu5282: Declare diplay_width / display_height as externs
Tom Rini
- [RFC 4/7] pinctrl: mscc: Fix multiple definition error
Tom Rini
- [RFC 5/7] Makefile: Disable gcc-10.0 warnings
Tom Rini
- [RFC 6/7] bootstage: Eliminate when not enabled
Tom Rini
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Stephan Gerhold
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Nicolas Dechesne
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Stephan Gerhold
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Ramon Fried
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Stephan Gerhold
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Stephan Gerhold
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Ramon Fried
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Stephan Gerhold
- [RFC] Load U-Boot without LK on DragonBoard 410c (+ DB820c?)
Ramon Fried
- [RFC] mkeficapsule: change the syntax
AKASHI Takahiro
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Simon Glass
- [RFC] Start using guestfish for U-Boot fs tests
Sean Anderson
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Alper Nebi Yasak
- [RFC] Start using guestfish for U-Boot fs tests
Sean Anderson
- [RFC] Start using guestfish for U-Boot fs tests
Alper Nebi Yasak
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Alper Nebi Yasak
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Tom Rini
- [RFC] Start using guestfish for U-Boot fs tests
Alper Nebi Yasak
- [RFC PATCH 00/13] Add support for Allwinner R329
Icenowy Zheng
- [RFC PATCH 00/28] cli: Add a new shell
Sean Anderson
- [RFC PATCH 00/28] cli: Add a new shell
Tom Rini
- [RFC PATCH 00/28] cli: Add a new shell
Wolfgang Denk
- [RFC PATCH 00/28] cli: Add a new shell
Sean Anderson
- [RFC PATCH 00/28] cli: Add a new shell
Sean Anderson
- [RFC PATCH 00/28] cli: Add a new shell
Heiko Schocher
- [RFC PATCH 00/28] cli: Add a new shell
Sean Anderson
- [RFC PATCH 01/13] sunxi: decide the inclusion of SCP by SCP_ADDR existence
Icenowy Zheng
- [RFC PATCH 01/13] sunxi: decide the inclusion of SCP by SCP_ADDR existence
Andre Przywara
- [RFC PATCH 01/28] Add Zlib License
Sean Anderson
- [RFC PATCH 01/28] Add Zlib License
Simon Glass
- [RFC PATCH 02/13] sunxi: only include alias for eMMC when mmc2 used
Icenowy Zheng
- [RFC PATCH 02/13] sunxi: only include alias for eMMC when mmc2 used
Andre Przywara
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Simon Glass
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Michael Nazzareno Trimarchi
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Simon Glass
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Kostas Michalopoulos
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Michael Nazzareno Trimarchi
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 02/28] cli: Add LIL shell
Marek Behun
- [RFC PATCH 02/28] cli: Add LIL shell
Sean Anderson
- [RFC PATCH 02/28] cli: Add LIL shell
Michael Nazzareno Trimarchi
- [RFC PATCH 02/28] cli: Add LIL shell
Tom Rini
- [RFC PATCH 02/28] cli: Add LIL shell
Wolfgang Denk
- [RFC PATCH 03/13] mmc: sunxi: conditionally include MMC2 initialization code
Icenowy Zheng
- [RFC PATCH 03/13] mmc: sunxi: conditionally include MMC2 initialization code
Andre Przywara
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Sean Anderson
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Rasmus Villemoes
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Wolfgang Denk
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Sean Anderson
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Tom Rini
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Kostas Michalopoulos
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Sean Anderson
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Wolfgang Denk
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Steve Bennett
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Sean Anderson
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Simon Glass
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Sean Anderson
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Wolfgang Denk
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Sean Anderson
- [RFC PATCH 03/28] cli: lil: Replace strclone with strdup
Wolfgang Denk
- [RFC PATCH 04/13] sunxi: add memory addresses for R329 SoC
Icenowy Zheng
- [RFC PATCH 04/28] cli: lil: Remove most functions by default
Sean Anderson
- [RFC PATCH 04/28] cli: lil: Remove most functions by default
Simon Glass
- [RFC PATCH 05/13] sunxi: add support for R329 clocks
Icenowy Zheng
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Sean Anderson
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Simon Glass
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Sean Anderson
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Wolfgang Denk
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Tom Rini
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Sean Anderson
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Simon Glass
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Tom Rini
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Wolfgang Denk
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Wolfgang Denk
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Simon Glass
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Tom Rini
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Kostas Michalopoulos
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Wolfgang Denk
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Tom Rini
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Sean Anderson
- [RFC PATCH 05/28] cli: lil: Rename some functions to be more like TCL
Wolfgang Denk
- [RFC PATCH 06/13] sunxi: add support for basical pinmux setup on R329
Icenowy Zheng
- [RFC PATCH 06/28] cli: lil: Convert some defines to enums
Sean Anderson
- [RFC PATCH 07/13] sunxi: add support for R329 DRAM controller
Icenowy Zheng
- [RFC PATCH 07/28] cli: lil: Simplify callbacks
Sean Anderson
- [RFC PATCH 08/13] sunxi: add Kconfig option for R329
Icenowy Zheng
- [RFC PATCH 08/28] cli: lil: Handle commands with dots
Sean Anderson
- [RFC PATCH 09/13] sunxi: sync R329 CCU binding headers from internal WIP kernel tree
Icenowy Zheng
- [RFC PATCH 09/28] cli: lil: Use error codes
Sean Anderson
- [RFC PATCH 1/2] build_bug.h: add wrapper for _Static_assert
Tom Rini
- [RFC PATCH 10/13] clk: sunxi: add support for R329 in sunxi DM clock driver
Icenowy Zheng
- [RFC PATCH 10/28] cli: lil: Add printf-style format helper for errors
Sean Anderson
- [RFC PATCH 11/13] mmc: sunxi: add support for R329 MMC controller
Icenowy Zheng
- [RFC PATCH 11/28] cli: lil: Add several helper functions for errors
Sean Anderson
- [RFC PATCH 12/13] sunxi: sync R329 DTs from internal WIP kernel tree
Icenowy Zheng
- [RFC PATCH 12/28] cli: lil: Check for ctrl-c
Sean Anderson
- [RFC PATCH 12/28] cli: lil: Check for ctrl-c
Simon Glass
- [RFC PATCH 13/13] sunxi: add support for Sipeed Maix IIA Dock board
Icenowy Zheng
- [RFC PATCH 13/28] cli: lil: Wire up LIL to the rest of U-Boot
Sean Anderson
- [RFC PATCH 13/28] cli: lil: Wire up LIL to the rest of U-Boot
Rasmus Villemoes
- [RFC PATCH 13/28] cli: lil: Wire up LIL to the rest of U-Boot
Sean Anderson
- [RFC PATCH 13/28] cli: lil: Wire up LIL to the rest of U-Boot
Simon Glass
- [RFC PATCH 14/28] cli: lil: Document structures
Sean Anderson
- [RFC PATCH 15/28] cli: lil: Convert LIL_ENABLE_POOLS to Kconfig
Sean Anderson
- [RFC PATCH 16/28] cli: lil: Convert LIL_ENABLE_RECLIMIT to KConfig
Sean Anderson
- [RFC PATCH 17/28] test: Add tests for LIL
Sean Anderson
- [RFC PATCH 17/28] test: Add tests for LIL
Simon Glass
- [RFC PATCH 18/28] cli: lil: Remove duplicate function bodies
Sean Anderson
- [RFC PATCH 19/28] cli: lil: Add "symbol" structure
Sean Anderson
- [RFC PATCH 2/2] global-data.h: add build-time sanity check of sizeof(struct global_data)
Tom Rini
- [RFC PATCH 20/28] cli: lil: Add config to enable debug output
Sean Anderson
- [RFC PATCH 21/28] cli: lil: Add a distinct parsing step
Sean Anderson
- [RFC PATCH 22/28] env: Add a priv pointer to hwalk_r
Sean Anderson
- [RFC PATCH 22/28] env: Add a priv pointer to hwalk_r
Tom Rini
- [RFC PATCH 23/28] cli: lil: Handle OOM for hm_put
Sean Anderson
- [RFC PATCH 24/28] cli: lil: Make proc always take 3 arguments
Sean Anderson
- [RFC PATCH 25/28] cli: lil: Always quote items in lil_list_to_value
Sean Anderson
- [RFC PATCH 26/28] cli: lil: Allocate len even when str is NULL in alloc_value_len
Sean Anderson
- [RFC PATCH 27/28] cli: lil: Add a function to quote values
Sean Anderson
- [RFC PATCH 28/28] cli: lil: Load procs from the environment
Sean Anderson
- [RFC PATCH] mtd: mxs_nand: Add support for edo mode for imx6ul(lz) architecture
Michael Trimarchi
- [RFC PATCH] mtd: spi-nor-core: Handle SPI_RX_SLOW in spi_nor_adjust_hwcaps()
Bin Meng
- [RFC PATCH] mtd: spi-nor-core: Handle SPI_RX_SLOW in spi_nor_adjust_hwcaps()
Pratyush Yadav
- [RFC PATCH] mtd: spi-nor-core: Handle SPI_RX_SLOW in spi_nor_adjust_hwcaps()
Bin Meng
- [RFC PATCH v1 0/6] add rk3318 A95X Z2 board
Alex Bee
- [RFC PATCH v1 0/6] add rk3318 A95X Z2 board
Johan Jonker
- [RFC PATCH v1 0/6] add rk3318 A95X Z2 board
Matwey V. Kornilov
- [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]
Tom Rini
- [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]
Sean Anderson
- [scan-admin at coverity.com: New Defects reported by Coverity Scan for Das U-Boot]
Tom Rini
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Manish Pandey2
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
François Ozog
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Julius Werner
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Simon Glass
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Julius Werner
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
François Ozog
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Daniel Thompson
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Manish Pandey2
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Julius Werner
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
François Ozog
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Simon Glass
- [TF-A] Proposal: TF-A to adopt hand-off blocks (HOBs) for information passing between boot stages
Julius Werner
- [U-boot-SPL] issue with loading fitImage in SPL falcon mode.
Abder
- [U-Boot] [PATCH v3 13/20] spl: nand: sunxi: use PIO instead of DMA
Miquel Raynal
- [U-Boot] [PATCH v3 13/20] spl: nand: sunxi: use PIO instead of DMA
Maxime Ripard
- [U-Boot] U-boot build: How to add a static library to the u-boot build
Daniel D
- [u-boot PATCH] arm: mach-k3: am6_init: Prioritize MSMC traffic over DDR in NAVSS Northbridge
Jan Kiszka
- [Uboot-stm32] [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
Ahmad Fatoum
- [Uboot-stm32] [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support
Patrick DELAUNAY
- [v2 PATCH 1/3] board: freescale: LX2160ARDB: Add MAINTAINER
Hexagon Email Recovery
- [v2 PATCH 2/3] board: freescale: LX2160AQDS: Add MAINTAINER
Hexagon Email Recovery
- [v3 04/17] arm: socfpga: Add handoff data support for Intel N5X device
Ley Foon Tan
- [v3 05/17] drivers: clk: Add clock driver for Intel N5X device
Ley Foon Tan
- [v3 07/17] drivers: clk: Add memory clock driver for Intel N5X device
Ley Foon Tan
- [v3 12/17] ddr: altera: Add SDRAM driver for Intel N5X device
Ley Foon Tan
- [v3 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device
Ley Foon Tan
- [v3 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device
Lim, Elly Siew Chin
- [v4 00/17] Add Intel N5X SoC support
Siew Chin Lim
- [v4 01/17] arm: socfpga: Move linux_qspi_enable from bootcommand to board_prep_linux function
Siew Chin Lim
- [v4 02/17] arm: socfpga: Changed base_addr_s10.h to base_addr_soc64.h
Siew Chin Lim
- [v4 03/17] arm: socfpga: Add base address for Intel N5X device
Siew Chin Lim
- [v4 04/17] arm: socfpga: Add handoff data support for Intel N5X device
Siew Chin Lim
- [v4 05/17] drivers: clk: Add clock driver for Intel N5X device
Siew Chin Lim
- [v4 06/17] arm: socfpga: Get clock manager base address for Intel N5X device
Siew Chin Lim
- [v4 07/17] drivers: clk: Add memory clock driver for Intel N5X device
Siew Chin Lim
- [v4 08/17] arm: socfpga: Move cm_get_mpu_clk_hz function declaration to clock_manager.h
Siew Chin Lim
- [v4 09/17] arm: socfpga: Add clock manager for Intel N5X device
Siew Chin Lim
- [v4 10/17] arm: socfpga: Changed misc_s10.c to misc_soc64.c
Siew Chin Lim
- [v4 11/17] ddr: socfpga: Enable memory test on memory size less than 1GB
Siew Chin Lim
- [v4 12/17] ddr: altera: Add SDRAM driver for Intel N5X device
Siew Chin Lim
- [v4 13/17] arm: socfpga: Add SPL for Intel N5X device
Siew Chin Lim
- [v4 14/17] board: intel: Add socdk board support for Intel N5X device
Siew Chin Lim
- [v4 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device
Siew Chin Lim
- [v4 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device
Ley Foon Tan
- [v4 15/17] arm: dts: Add base dtsi and devkit dts for Intel N5X device
Lim, Elly Siew Chin
- [v4 16/17] include: configs: Add Intel N5X device CONFIGs
Siew Chin Lim
- [v4 17/17] arm: socfpga: Enable Intel N5X device build
Siew Chin Lim
- Adding UBI support to U-Boot 2014.04 without nand driver
Bartlomiej Grzeskowiak
- Bootcount device-model I2C EEPROM partition
Richard Forro
- boot hangs on new board with SAMA5D27C-D5M
Alexander Dahl
- Broken arc toolchain
Simon Glass
- Broken arc toolchain
Tom Rini
- Broken arc toolchain
Alexey Brodkin
- bug in SPI on rk3399 devices
Dennis Gilmore
- Build a standalone ext4 file system driver
Feng Libo
- Build a standalone ext4 file system driver
Tom Rini
- Building U-Boot for Compulab's imx8mm-cl-iot-gate board
Paul Liu
- Building U-Boot for Compulab's imx8mm-cl-iot-gate board
Fabio Estevam
- Building U-Boot for Compulab's imx8mm-cl-iot-gate board
Paul Liu
- Convert mvebu_mmc driver to driver model
Tony Dinh
- Convert mvebu_mmc driver to driver model
Jaehoon Chung
- Convert mvebu_mmc driver to driver model
Tony Dinh
- Debugging dtoc?
Tom Rini
- Debugging dtoc?
Simon Glass
- Debugging dtoc?
Simon Glass
- Debugging dtoc?
Simon Glass
- Debugging dtoc?
Tom Rini
- Debugging dtoc?
Simon Glass
- Debugging dtoc?
Tom Rini
- Debugging dtoc?
Simon Glass
- Debugging dtoc?
Tom Rini
- Debugging dtoc?
Simon Glass
- EFI from usb HDD
Michal Simek
- EFI from usb HDD
AKASHI Takahiro
- EFI from usb HDD
Michal Simek
- EFI from usb HDD
AKASHI Takahiro
- EFI from usb HDD
Michal Simek
- eMMC probe issue
vinoth
- Help wanted: Adding OpenSSL in FSL HAB
Daniel D
- Help wanted: Adding OpenSSL in FSL HAB
Jojan
- Help wanted: Adding OpenSSL in FSL HAB
Daniel D
- Help wanted: Adding OpenSSL in FSL HAB
Jojan
- Help wanted: Adding OpenSSL in FSL HAB
Daniel D
- Help with TI-U-BOOT
Antoine Naud
- Help with TI-U-BOOT
Ramon Fried
- Help with TI-U-BOOT
Antoine Naud
- Help with TI-U-BOOT
Ramon Fried
- Help with TI-U-BOOT
Antoine Naud
- Help with TI-U-BOOT
Ramon Fried
- Help with TI-U-BOOT
Nishanth Menon
- Help with u-boot when using the eMMC card in DDR mode
Abder
- Help with u-boot when using the eMMC card in DDR mode
Jaehoon Chung
- Help with u-boot when using the eMMC card in DDR mode
Abder
- Help with u-boot when using the eMMC card in DDR mode
Jaehoon Chung
- Help with u-boot when using the eMMC card in DDR mode
Abder
- Help with u-boot when using the eMMC card in DDR mode
Abder
- Help with u-boot when using the eMMC card in DDR mode
Jaehoon Chung
- How to build a standalone application of uboot with multiple source files
Jojan
- How to config ENV_IS_IN_NAND to default option in Kconfig?
天田南
- Illegal instruction - While starting Linux kernel.
Venkatakrishnan Sutharsan
- Illegal instruction - While starting Linux kernel.
Venkatakrishnan Sutharsan
- IMX8M Mini HAB secure boot - working?
Tim Harvey
- IMX8M Mini HAB secure boot - working?
Stefano Babic
- IMX8M Mini HAB secure boot - working?
Heiko Schocher
- IMX8M Mini HAB secure boot - working?
Tim Harvey
- IMX8M Mini HAB secure boot - working?
Heiko Schocher
- IMX8M Mini HAB secure boot - working?
Tim Harvey
- IMX8M Mini HAB secure boot - working?
Heiko Schocher
- iMX8MM USB support?
Fabio Estevam
- iMX8MM USB support?
Tim Harvey
- iMX8MM USB support?
Fabio Estevam
- iMX8MM USB support?
Tim Harvey
- iMX8MM USB support?
Fabio Estevam
- iMX8MM USB support?
Fabio Estevam
- iMX8MM USB support?
Fabio Estevam
- iMX8MM USB support?
Fabio Estevam
- iMX8MM USB support?
Tim Harvey
- iMX8MM USB support?
Fabio Estevam
- imx8qm uboot-imx custom images load
rkohli2000 gmail
- New Arch For Mkimage
Randy Yates
- Nokia RX51 U-Boot USB support updates?
Tom Rini
- Nokia RX51 U-Boot USB support updates?
Tom Rini
- Nokia RX51 U-Boot USB support updates?
Merlijn Wajer
- Nokia RX51 U-Boot USB support updates?
Tom Rini
- non-DM SPI_FLASH removal?
Marek Behun
- non-DM SPI_FLASH removal?
Tom Rini
- non-DM SPI_FLASH removal?
Marek Behun
- non-DM SPI_FLASH removal?
Marek Behun
- non-DM SPI_FLASH removal?
Tom Rini
- Please pull u-boot-dm
Simon Glass
- Please pull u-boot-dm
Tom Rini
- Please pull u-boot-dm
Simon Glass
- Please pull u-boot-dm
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master
Tom Rini
- Please pull u-boot-marvell/master
Stefan Roese
- Please pull u-boot-marvell/master (watchdog related)
Stefan Roese
- Please pull u-boot-marvell/master (watchdog related)
Tom Rini
- Please pull u-boot-net
Ramon Fried
- Please pull u-boot-net
Tom Rini
- Please pull u-boot-x86
Bin Meng
- Please pull u-boot-x86
Tom Rini
- Problem on imx: add rom api support on imx8mn
Michael Nazzareno Trimarchi
- Problem on imx: add rom api support on imx8mn
Peng Fan (OSS)
- Problem on imx: add rom api support on imx8mn
Michael Nazzareno Trimarchi
- Problem on imx: add rom api support on imx8mn
Peng Fan (OSS)
- Problem on imx: add rom api support on imx8mn
Michael Nazzareno Trimarchi
- Pull request: u-boot-imx u-boot-imx-20210717
Stefano Babic
- Pull request: u-boot-imx u-boot-imx-20210717
Tom Rini
- Pull request: u-boot-imx u-boot-imx-20210720
Stefano Babic
- Pull request: u-boot-imx u-boot-imx-20210720
Tom Rini
- Pull request: u-boot-imx u-boot-imx-20210720
Frieder Schrempf
- Pull request: u-boot-imx u-boot-imx-20210720
Stefano Babic
- Pull request: u-boot-imx u-boot-imx-20210720
Peng Fan
- Pull request: u-boot-imx u-boot-imx-20210720
Tom Rini
- Pull request: u-boot-spi/next for next
Tom Rini
- Pull request for efi-2021-07-rc5-2
Da Xue
- Pull request for efi-2021-07-rc5-2
Heinrich Schuchardt
- Pull request for efi-2021-07-rc5-2
Da Xue
- Pull request for efi-2021-07-rc5-2
Heinrich Schuchardt
- Pull request for efi-2021-07-rc5-2
Ilias Apalodimas
- Pull request for efi-2021-07-rc5-2
Heinrich Schuchardt
- Pull request for efi-2021-07-rc5-2
Ilias Apalodimas
- Pull request for efi-2021-07-rc6
Heinrich Schuchardt
- Pull request for efi-2021-07-rc6
Tom Rini
- Pull request for efi-2021-10-rc1
Heinrich Schuchardt
- Pull request for efi-2021-10-rc1
Tom Rini
- Pull request for efi-2021-10-rc1-2
Heinrich Schuchardt
- Pull request for efi-2021-10-rc1-2
Tom Rini
- Pull request for efi-2021-10-rc1-3
Heinrich Schuchardt
- Pull request for efi-2021-10-rc1-3
Tom Rini
- pull request of u-boot-fsl-qoriq for v2021.10
Priyanka Jain
- pull request of u-boot-fsl-qoriq for v2021.10
Tom Rini
- qemu-kvm doesn't work with qemu-x86_64_defconfig
Matwey V. Kornilov
- qemu-kvm doesn't work with qemu-x86_64_defconfig
Bin Meng
- qemu-kvm doesn't work with qemu-x86_64_defconfig
Matwey V. Kornilov
- QEMU NUMA and U-Boot
Heinrich Schuchardt
- QEMU NUMA and U-Boot
AKASHI Takahiro
- QEMU NUMA and U-Boot
Heinrich Schuchardt
- QEMU NUMA and U-Boot
Heinrich Schuchardt
- QEMU NUMA and U-Boot
Heinrich Schuchardt
- QEMU NUMA and U-Boot
François Ozog
- QEMU NUMA and U-Boot
François Ozog
- QEMU NUMA and U-Boot
AKASHI Takahiro
- QEMU NUMA and U-Boot
François Ozog
- QEMU NUMA and U-Boot
François Ozog
- QEMU NUMA and U-Boot
Heinrich Schuchardt
- Read Kernel Command Line Options From a Text File
Matteo Guglielmi
- RFC: Devices for files and partitions
Simon Glass
- RFC: Devices for files and partitions
AKASHI Takahiro
- RFC: Devices for files and partitions
Heinrich Schuchardt
- RFC: Devices for files and partitions
Simon Glass
- RISC-V Microconference Accepted into 2021 Linux Plumbers Conference
Atish Patra
- rock960c
Trevor Woerner
- rock960c
Peter Robinson
- rock960c
Trevor Woerner
- RPI 4 U-Boot 2021.01 Yocto fails with Card did not respond to voltage select! : -110
Kaiwan N Billimoria
- RZ/G2 USB quirks U-Boot
Adam Ford
- SAMA5D27 - UTMI issue?
Tim
- sandbox: drivers/core/ofnode.c:118: ofnode_read_bool: Assertion `ofnode_valid(node)' failed.
Heinrich Schuchardt
- sandbox: drivers/core/ofnode.c:118: ofnode_read_bool: Assertion `ofnode_valid(node)' failed.
Simon Glass
- Setting serverip from DHCP server
Gregory Anders
- Setting serverip from DHCP server
Harald Seiler
- Some questions about the U-Boot verified boot
Thomas Perrot
- Suggestion: When flash is uninitialized, *silently* fall back to default environment
Zack Weinberg
- U-boot
Roman Kopytin
- U-boot
Michael Nazzareno Trimarchi
- U-boot
Roman Kopytin
- U-boot
Thomas Perrot
- U-boot
Roman Kopytin
- U-boot
Simon Glass
- U-BOOT 2021.07 and STM32MP15x issues for Trusted Boot Chain
gianluca
- U-BOOT 2021.07 and STM32MP15x issues for Trusted Boot Chain
Patrick DELAUNAY
- U-Boot: Arm64: bootm gets stuck if RANDOMIZE_BASE is disabled
Ahsan Hussain
- U-Boot: Arm64: bootm gets stuck if RANDOMIZE_BASE is disabled
Mark Rutland
- U-Boot: Arm64: bootm gets stuck if RANDOMIZE_BASE is disabled
Ahsan Hussain
- U-Boot: Arm64: bootm gets stuck if RANDOMIZE_BASE is disabled
Ahsan Hussain
- u-boot and mtdparts
Marek Behún
- u-boot and mtdparts
Simon Glass
- u-boot and mtdparts
Tom Rini
- U-Boot boards needing CONFIG_DM migration
Tom Rini
- U-Boot boards needing CONFIG_DM migration
Fabio Estevam
- U-Boot boards needing CONFIG_DM migration
Tom Rini
- U-Boot boards needing CONFIG_DM migration
Stefano Babic
- U-Boot boards needing CONFIG_DM migration
Fabio Estevam
- U-Boot boards needing CONFIG_DM migration
Tom Rini
- U-Boot boards needing CONFIG_DM migration
Stefano Babic
- U-Boot boards needing CONFIG_DM migration
Tom Rini
- U-Boot contributor call 20th July
Simon Glass
- U-Boot contributor call 20th July
Simon Glass
- U-Boot contributor call 20th July
Stefan Roese
- U-Boot contributor call 20th July
Jagan Teki
- U-Boot contributor call 20th July
Stefan Roese
- U-Boot Digest, Vol 158, Issue 63
Oleksandr G Zhadan
- U-Boot Digest, Vol 158, Issue 63
Tom Rini
- U-boot hanging when I give mmc access commands
Muhammed Irshad
- U-boot integration in the bootloader process of Rasperry Pi CM4
Anthony Arrascue
- U-boot integration in the bootloader process of Rasperry Pi CM4
Mauro Salvini
- U-boot integration in the bootloader process of Rasperry Pi CM4
Anthony Arrascue
- U-boot integration in the bootloader process of Rasperry Pi CM4
Mauro Salvini
- U-Boot loaded RAMDisk crashes Linux on MT7623
Daniel Golle
- U-Boot loaded RAMDisk crashes Linux on MT7623
Daniel Golle
- U-Boot loaded RAMDisk crashes Linux on MT7623
Daniel Schwierzeck
- u-boot saveenv to redundant fat does not persist env
Pierre-Alexis Ciavaldini
- u-boot saveenv to redundant fat does not persist env
Pierre-Alexis Ciavaldini
- u-boot saveenv to redundant fat does not persist env
Tom Rini
- u-boot saveenv to redundant fat does not persist env
Pierre-Alexis Ciavaldini
- u-boot saveenv to redundant fat does not persist env
Tom Rini
- u-boot saveenv to redundant fat does not persist env
Pierre-Alexis Ciavaldini
- u-boot saveenv to redundant fat does not persist env
Tom Rini
- ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 0:0, read only 64 bytes, retry
Ivan Riabtsov
- Uboot 2021.07 Hung Kernel bug
Pavan Reddy
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- using binman fails boot
Tim Harvey
- using binman fails boot
Simon Glass
- Verified Boot for Embedded (VBE) proposal
Simon Glass
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Michal Simek
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Michal Simek
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
- zynqmpbif - sample
Michal Simek
- zynqmpbif - sample
Jorge Ramirez-Ortiz, Foundries
Last message date:
Sat Jul 31 23:12:58 CEST 2021
Archived on: Sat Jul 31 23:13:15 CEST 2021
This archive was generated by
Pipermail 0.09 (Mailman edition).