[PATCH 1/1] lib: disable CONFIG_SPL_HEXDUMP by default

Patrick DELAUNAY patrick.delaunay at foss.st.com
Tue Jul 27 11:51:35 CEST 2021


On 7/24/21 5:35 PM, Heinrich Schuchardt wrote:
> CONFIG_HEXDUMP is needed to display UEFI variables using 'printenv -e'.
>
> Enabling CONFIG_SPL_HEXDUMP only makes sense for debugging purposes.
> Hence CONFIG_SPL_HEXDUMP should not be enabled by default.
>
> The following boards currently have CONFIG_SPL_HEXDUMP=y:
>
> axm_defconfig
> imx8mm-cl-iot-gate_defconfig
> imx8mm_venice_defconfig
> imxrt1020-evk_defconfig
> imxrt1050-evk_defconfig
> kontron_sl28_defconfig
> kp_imx53_defconfig
> lx2160ardb_tfa_stmm_defconfig
> mt7622_rfb_defconfig
> octeon_ebb7304_defconfig
> octeon_nic23_defconfig
> qemu_arm64_defconfig
> qemu_arm_defconfig
> qemu-riscv32_defconfig
> qemu-riscv32_smode_defconfig
> qemu-riscv64_defconfig
> qemu-riscv64_smode_defconfig
> qemu-x86_64_defconfig
> qemu-x86_defconfig
> sandbox64_defconfig
> sandbox_defconfig
> stm32mp15_basic_defconfig
> stm32mp15_trusted_defconfig
> synquacer_developerbox_defconfig
> taurus_defconfig
> xilinx_versal_virt_defconfig
>
> The patch only keeps it enabled on
>
> sandbox64_defconfig
> sandbox_defconfig
>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
>   configs/sandbox64_defconfig | 1 +
>   configs/sandbox_defconfig   | 1 +
>   lib/Kconfig                 | 1 -
>   3 files changed, 2 insertions(+), 1 deletion(-)
>

Acked-by: Patrick Delaunay <patrick.delaunay at foss.st.com> # for 
stm32mp15_*_defconfig


but it is strange for "stm32mp15_trusted_defconfig" as this 
configuration don't enable the SPL support(see after).


> diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig
> index 5fb1da49e4..9e3c2d5e41 100644
> --- a/configs/sandbox64_defconfig
> +++ b/configs/sandbox64_defconfig
> @@ -233,6 +233,7 @@ CONFIG_CMD_DHRYSTONE=y
>   CONFIG_TPM=y
>   CONFIG_LZ4=y
>   CONFIG_ERRNO_STR=y
> +CONFIG_SPL_HEXDUMP=y
>   CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
>   CONFIG_EFI_CAPSULE_ON_DISK=y
>   CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index a1e77a511d..7e8694100c 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -281,6 +281,7 @@ CONFIG_CMD_DHRYSTONE=y
>   CONFIG_TPM=y
>   CONFIG_LZ4=y
>   CONFIG_ERRNO_STR=y
> +CONFIG_SPL_HEXDUMP=y
>   CONFIG_EFI_RUNTIME_UPDATE_CAPSULE=y
>   CONFIG_EFI_CAPSULE_ON_DISK=y
>   CONFIG_EFI_CAPSULE_FIRMWARE_FIT=y
> diff --git a/lib/Kconfig b/lib/Kconfig
> index ad4d75e0a4..b0ea4cf91c 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -559,7 +559,6 @@ config HEXDUMP
>   config SPL_HEXDUMP
>   	bool "Enable hexdump in SPL"
>   	depends on HEXDUMP

I think it should depends on SPL alos

+ depends on SPL && HEXDUMP


> -	default y
>   	help
>   	  This enables functions for printing dumps of binary data in
>   	  SPL.
> --
> 2.30.2
>

Regards

Patrick



More information about the U-Boot mailing list