[PATCH v2 6/6] board: apalis-tk1: launch toradex easy installer in usb recovery
Oleksandr Suvorov
oleksandr.suvorov at toradex.com
Fri Jul 23 08:39:50 CEST 2021
From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
The USB recovery mode is used by Toradex to load the Toradex Easy
Installer image which supports further system images installation.
Prepare for loading and launching the Toradex Easy Installer if the
USB Recovery mode is activated.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
---
Changes in v2:
- remove 2 patches not meet requirements.
END
board/toradex/apalis-tk1/apalis-tk1.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c
index b97617cfca..f418f2c39f 100644
--- a/board/toradex/apalis-tk1/apalis-tk1.c
+++ b/board/toradex/apalis-tk1/apalis-tk1.c
@@ -38,8 +38,17 @@
int arch_misc_init(void)
{
if (readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BOOTTYPE) ==
- NVBOOTTYPE_RECOVERY)
- printf("USB recovery mode\n");
+ NVBOOTTYPE_RECOVERY) {
+ printf("USB recovery mode, attempting to boot Toradex Easy Installer\n");
+ env_set("bootdelay", "-2");
+ env_set("defargs", "pcie_aspm=off user_debug=30");
+ env_set("fdt_high", "");
+ env_set("initrd_high", "");
+ env_set("setup", "env set setupargs igb_mac=${ethaddr} consoleblank=0 no_console_suspend=1 console=${console},${baudrate}n8 ${memargs}");
+ env_set("teziargs", "rootfstype=squashfs root=/dev/ram quiet autoinstall");
+ env_set("vidargs", "video=HDMI-A-1:640x480-16 at 60D");
+ env_set("bootcmd", "run setup; env set bootargs ${defargs} ${setupargs} ${vidargs} ${teziargs}; bootm 0x80208000#config@${soc}-${fdt_module}-${fdt_board}.dtb");
+ }
/* PCB Version Indication: V1.2 and later have GPIO_PV0 wired to GND */
gpio_request(TEGRA_GPIO(V, 0), "PCB Version Indication");
--
2.31.1
More information about the U-Boot
mailing list