[PATCH] arm: dts: stm32mp15: alignment with v5.14
Patrick Delaunay
patrick.delaunay at foss.st.com
Tue Jul 27 12:15:12 CEST 2021
Device tree alignment with Linux kernel v5.14-rc3
- ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
- ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
- ARM: dts: stm32: add a new DCMI pins group on stm32mp15
- ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---
arch/arm/dts/stm32mp15-pinctrl.dtsi | 33 +++++++++++++++++++
arch/arm/dts/stm32mp151.dtsi | 16 ++++-----
...157a-microgea-stm32mp1-microdev2.0-of7.dts | 2 +-
3 files changed, 42 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index 060baa8b7e..5b60ecbd71 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -118,6 +118,39 @@
};
};
+ dcmi_pins_b: dcmi-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('C', 6, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('B', 9, AF13)>;/* DCMI_D7 */
+ bias-disable;
+ };
+ };
+
+ dcmi_sleep_pins_b: dcmi-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('C', 6, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('E', 1, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('B', 9, ANALOG)>;/* DCMI_D7 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index 177927d14e..8e0a0bc1dd 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1399,8 +1399,8 @@
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
- <&mdma1 22 0x2 0x100008 0x0 0x0>;
+ dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+ <&mdma1 22 0x2 0x10100008 0x0 0x0>;
dma-names = "tx", "rx";
clocks = <&rcc QSPI_K>;
resets = <&rcc QSPI_R>;
@@ -1446,12 +1446,6 @@
status = "disabled";
};
- stmmac_axi_config_0: stmmac-axi-config {
- snps,wr_osr_lmt = <0x7>;
- snps,rd_osr_lmt = <0x7>;
- snps,blen = <0 0 0 0 16 8 4>;
- };
-
ethernet0: ethernet at 5800a000 {
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
@@ -1477,6 +1471,12 @@
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
status = "disabled";
+
+ stmmac_axi_config_0: stmmac-axi-config {
+ snps,wr_osr_lmt = <0x7>;
+ snps,rd_osr_lmt = <0x7>;
+ snps,blen = <0 0 0 0 16 8 4>;
+ };
};
usbh_ohci: usb at 5800c000 {
diff --git a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 674b2d330d..5670b23812 100644
--- a/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -89,7 +89,7 @@
};
&pinctrl {
- ltdc_pins: ltdc {
+ ltdc_pins: ltdc-0 {
pins {
pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
<STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
--
2.25.1
More information about the U-Boot
mailing list