[PATCH v2 0/8] Arasan sdhci driver updates

[Ashok Reddy Soma]

This patch series updates/fixes below things:
 - Handle errors from tapdelay functions and return to set_delay()
 - Add ZynqMP firmware related enums which are used in sdhci driver
 - Replace mmio_write() with firmware call xilinx_pm_request()
 - Move tapdelay setting code from tap_delays.c to driver and remove
   tap_dealy.c and zynqmp_tap_delay.h
 - Change variable name from deviceid to node_id in couple of functions
   for consistancy
 - Add a workaround for sd card detect stable issue for Versal platforms
 - Use set_control_reg from sdhci.c

Changes in v2:
 - Split patch 1/7 to two patches, one for zynq_sdhci and other one
   for sdhci
 - This is the second patch that has been split from 1/7
 - This covers changes for sdhci driver separately
 - Added a debug print in case of error from set_delay()
 - Added comment for why 1ms delay is needed between DLL assert and
 release
 - Remove mmc->dev->seq_ and use priv->deviceid instead
 - Changed return error from -EIO to -ETIMEDOUT in arasan_sdhci_probe()
   in card detect state stable workaround

Ashok Reddy Soma (6):
  mmc: zynq_sdhci: Return errors from arasan_sdhci_set_tapdelay
  mmc: sdhci: Change prototype of set_delay to return errors
  mmc: zynq_sdhci: Use xilinx pm request instead of mmio_write
  mmc: zynq_sdhci: Move setting tapdelay code to driver
  mmc: zynq_sdhci: Change variable deviceid to node_id
  mmc: zynq_sdhci: Use set_control_reg from sdhci.c

T Karthik Reddy (2):
  zynqmp_firmware: Add zynqmp firmware related enums
  mmc: zynq_sdhci: Wait till sd card detect state is stable

 board/xilinx/zynqmp/Makefile     |   2 -
 board/xilinx/zynqmp/tap_delays.c | 101 --------------------
 drivers/mmc/sdhci.c              |  10 +-
 drivers/mmc/zynq_sdhci.c         | 155 +++++++++++++++++++++++--------
 include/sdhci.h                  |   2 +-
 include/zynqmp_firmware.h        | 127 +++++++++++++++++++++++++
 include/zynqmp_tap_delay.h       |  21 -----
 7 files changed, 251 insertions(+), 167 deletions(-)
 delete mode 100644 board/xilinx/zynqmp/tap_delays.c
 delete mode 100644 include/zynqmp_tap_delay.h

-- 
2.17.1