[PATCH 5/5] board: gateworks: venice: remove forced enable of GSC thermal protection

[Tim Harvey]

The Gateworks System Controller thermal protection feature will disable
the board primary power supply if the on-board temperature sensor
reaches 86C. In many cases this could occur before the temperature
critical components such as CPU, DRAM, eMMC, and power supplies have
reached their max temperature.

Remove the forced re-enable of thermal protection so that users can
knowingly disable it.

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 board/gateworks/venice/gsc.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/board/gateworks/venice/gsc.c b/board/gateworks/venice/gsc.c
index 9a6712ec88..c75bc6f855 100644
--- a/board/gateworks/venice/gsc.c
+++ b/board/gateworks/venice/gsc.c
@@ -221,9 +221,11 @@ static const char *gsc_get_rst_cause(struct udevice *dev)
 
 	/* thermal protection */
 	if (!dm_i2c_read(dev, GSC_SC_THERM_PROTECT, &reg, 1)) {
-		reg |= 1;
-		dm_i2c_write(dev, GSC_SC_THERM_PROTECT, &reg, 1);
-		strcat(str, " Thermal Protection Enabled");
+		strcat(str, " Thermal Protection ");
+		if (reg & BIT(0))
+			strcat(str, "Enabled");
+		else
+			strcat(str, "Disabled");
 	}
 
 	return str;
-- 
2.17.1