[PATCH v3 07/10] watchdog: wdt-uclass.c: handle all DM watchdogs in watchdog_reset()

[Simon Glass]

Hi Rasmus,

On Fri, 2 Jul 2021 at 06:45, Rasmus Villemoes
<rasmus.villemoes at prevas.dk> wrote:
>
> A board can have and make use of more than one watchdog device, say
> one built into the SOC and an external gpio-petted one. Having
> wdt-uclass only handle the first is both a little arbitrary and
> unexpected.
>
> So change initr_watchdog() so we visit (probe) all DM watchdog
> devices. This essentially boils down to making the init_watchdog_dev
> function into a .post_probe method.
>
> Similarly let watchdog_reset() loop over the whole uclass - each
> having their own ratelimiting metadata, and a separate "is this device
> running" flag.
>
> This gets rid of the watchdog_dev member of struct global_data.  We
> do, however, still need the GD_FLG_WDT_READY set in
> initr_watchdog(). This is because watchdog_reset() can get called
> before DM is ready, and I don't think we can call uclass_get() that
> early.
>
> The current code just returns 0 if "getting" the first device fails -
> that can of course happen because there are no devices, but it could
> also happen if its ->probe call failed. In keeping with that, continue
> with the handling of the remaining devices even if one fails to
> probe. This is also why we cannot use uclass_probe_all().
>
> If desired, it's possible to later add a per-device "u-boot,autostart"
> boolean property, so that one can do CONFIG_WATCHDOG_AUTOSTART
> per-device.
>
> Reviewed-by: Stefan Roese <sr at denx.de>
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
> ---
>  drivers/watchdog/wdt-uclass.c     | 96 ++++++++++++++++++-------------
>  include/asm-generic/global_data.h |  6 --
>  2 files changed, 56 insertions(+), 46 deletions(-)
>

Please see my belated reply on the previous version of this patch.

Regards,
Simon