[PATCH 1/2] stm32mp: use device sequence number in boot_instance variable

[Patrick DELAUNAY]

Hi,

On 7/6/21 5:19 PM, Patrick Delaunay wrote:
> Use the device sequence number in boot_instance variable
> and no more the SDMMC instance provided by ROM code/TF-A.
>
> After this patch we don't need to define the mmc alias in
> device tree, for example:
>    mmc0 = &sdmmc1;
>    mmc1 = &sdmmc2;
>    mmc2 = &sdmmc3;
> to have a correct mapping between the ROM code boot device =
> "${boot_device}${boot_instance}" and the MMC device in U-Boot.
>
> With this patch the 'mmc0' device (used in mmc commands) is
> always used when only one instance sdmmc is activated in device
> tree, even if it is only the sdmmc2 or sdmmc3.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> Dependancy with [1] to have correct 'mmc' node name (sdmmc@ => mmc@)
> from kernel "ARM: dts: stm32: Rename mmc controller nodes to mmc@"
>
> [1] "arm: dts: stm32mp15: alignment with v5.13"
>      http://patchwork.ozlabs.org/project/uboot/list/?series=251100&state=*
>
>
>   arch/arm/mach-stm32mp/cpu.c                | 16 +++++++++-
>   arch/arm/mach-stm32mp/include/mach/stm32.h |  4 +++
>   board/st/stm32mp1/stm32mp1.c               | 35 +++++++++++++++++-----
>   3 files changed, 46 insertions(+), 9 deletions(-)
>

Applied to u-boot-stm/master, thanks!

Regards
Patrick