[PATCH v2 12/14] configs: ast2600-evb: Enable SPL FIT support

Chia-Wei Wang chiawei_wang at aspeedtech.com
Fri Jul 16 07:55:44 CEST 2021


Enable SPL FIT image load and verification support.
The HW accelerated SHA is also available with the
newly added support of the HACE HW hash engine.

Signed-off-by: Chia-Wei Wang <chiawei_wang at aspeedtech.com>
---
 configs/evb-ast2600_defconfig | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/configs/evb-ast2600_defconfig b/configs/evb-ast2600_defconfig
index f24425997d..5049217b55 100644
--- a/configs/evb-ast2600_defconfig
+++ b/configs/evb-ast2600_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_ASPEED=y
-CONFIG_SYS_TEXT_BASE=0x10000
+CONFIG_SYS_TEXT_BASE=0x80000000
 CONFIG_ASPEED_AST2600=y
 CONFIG_TARGET_EVB_AST2600=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -11,12 +11,19 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="ast2600-evb"
 CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x83000000
 CONFIG_SPL_SIZE_LIMIT=0x10000
 CONFIG_SPL=y
 # CONFIG_ARMV7_NONSEC is not set
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
-# CONFIG_LEGACY_IMAGE_FORMAT is not set
+CONFIG_FIT_ENABLE_SHA384_SUPPORT=y
+CONFIG_FIT_ENABLE_SHA512_SUPPORT=y
+CONFIG_SPL_FIT_SIGNATURE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
 CONFIG_USE_BOOTCOMMAND=y
@@ -24,8 +31,15 @@ CONFIG_BOOTCOMMAND="bootm 20100000"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y
-# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000000
+CONFIG_SPL_SHA1_SUPPORT=y
+CONFIG_SPL_SHA256_SUPPORT=y
+CONFIG_SPL_SHA384_SUPPORT=y
+CONFIG_SPL_SHA512_SUPPORT=y
+CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
@@ -45,6 +59,8 @@ CONFIG_REGMAP=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
+CONFIG_ASPEED_HACE=y
+CONFIG_ASPEED_ARCY=y
 CONFIG_DM_I2C=y
 CONFIG_MISC=y
 CONFIG_SPL_MISC=y
@@ -63,6 +79,8 @@ CONFIG_SYS_NS16550=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_WDT=y
+CONFIG_SHA512_HW_ACCEL=y
 CONFIG_HEXDUMP=y
 # CONFIG_SPL_HEXDUMP is not set
 # CONFIG_EFI_LOADER is not set
+CONFIG_PHANDLE_CHECK_SEQ=y
-- 
2.17.1



More information about the U-Boot mailing list