[PATCH] board: ti: k2g: Program PadConfig_202 before locking RSTMUX8

Lokesh Vutla lokeshvutla at ti.com
Thu Jul 29 07:14:31 CEST 2021


On Mon, 26 Jul 2021 18:22:48 -0500, Suman Anna wrote:
> The PADCONFIG_202 register (0x02621328) is affected by the locking
> of the RSTMUX8 register (0x02620328), and so cannot be configured
> in kernel. This has been confirmed as a hardware bug and affects
> all K2G SoCs.
> 
> Setup the pinmux for this pin before locking the RSTMUX8 register
> to allow the ICSS1 PRU1 Ethernet PHY port to work properly. The
> workaround was added only for the K2G-ICE board to configure the
> pins needed for the PRUSS Ethernet usecase.
 
Applied to https://source.denx.de/u-boot/custodians/u-boot-ti.git for-rc, thanks!
[1/1] board: ti: k2g: Program PadConfig_202 before locking RSTMUX8
      https://source.denx.de/u-boot/custodians/u-boot-ti/-/commit/a6c64d255e
 
--
Thanks and Regards,
Lokesh


More information about the U-Boot mailing list